> Update README to use 4.19.35_1.1.0 released firmware images.
> Signed-off-by: Peng Fan
Applied to u-boot-imx, master, thanks !
Best regards,
Stefano Babic
--
=
DENX Software Engineering GmbH, Managing Director: Wolfgang
Hi Peng,
On Thu, Jan 9, 2020 at 10:13 AM Fabio Estevam wrote:
> Does it work if you use the ATF 70fa7bc version?
It works for me with ATF 70fa7bc version if I do the following change:
--- a/configs/imx8qxp_mek_defconfig
+++ b/configs/imx8qxp_mek_defconfig
@@ -86,4 +86,5 @@ CONFIG_FSL_LPUART=y
Hi Peng,
On Wed, Jan 8, 2020 at 10:50 PM Peng Fan wrote:
> I use internal repo which has this commit.
Could you please test using the external repo as written in your patch?
With these versions I am getting:
U-Boot 2020.01-00369-g81132f1c96 (Jan 09 2020 - 10:02:47 -0300)
CPU: NXP i.MX8QXP
> Subject: Re: [PATCH] imx: imx8qxp_mek: update README
>
> Hi Peng,
>
> On Wed, Jan 8, 2020 at 10:44 PM Peng Fan wrote:
>
> > U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800)
> >
> > CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 20C
> >
&
Hi Peng,
On Wed, Jan 8, 2020 at 10:44 PM Peng Fan wrote:
> U-Boot 2020.01-00243-g21aede21b0 (Jan 09 2020 - 10:01:31 +0800)
>
> CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 20C
>
> Model: Freescale i.MX8QXP MEK
> Board: iMX8QXP MEK
> Build: SCFW 550f3079, SECO-FW d7523fe8, ATF f900faa
I see a mis
> Subject: Re: [PATCH] imx: imx8qxp_mek: update README
>
> Hi Peng,
>
> On Wed, Jan 8, 2020 at 10:33 PM Peng Fan wrote:
>
> > The ipg clk patch needs to be reverted for now. Anyway the log as below:
>
> Which commit are you referring to? Can you send a rever
Hi Peng,
On Wed, Jan 8, 2020 at 10:33 PM Peng Fan wrote:
> The ipg clk patch needs to be reverted for now. Anyway the log as below:
Which commit are you referring to? Can you send a revert? Is this
revert needed for booting this board?
> U-Boot SPL 2020.01-00025-gedb89b239c-dirty (Jan 08 2020
> Subject: RE: [PATCH] imx: imx8qxp_mek: update README
>
> > Subject: Re: [PATCH] imx: imx8qxp_mek: update README
> >
> > Hi Peng
> >
> > On Tue, Jan 7, 2020 at 10:33 PM Peng Fan wrote:
> > >
> > > Update README to use 4.19.35_1.1.0 releas
> Subject: Re: [PATCH] imx: imx8qxp_mek: update README
>
> Hi Peng
>
> On Tue, Jan 7, 2020 at 10:33 PM Peng Fan wrote:
> >
> > Update README to use 4.19.35_1.1.0 released firmware images.
>
> I have tried the same here and I still get a hang with Ethernet
Hi Peng
On Tue, Jan 7, 2020 at 10:33 PM Peng Fan wrote:
>
> Update README to use 4.19.35_1.1.0 released firmware images.
I have tried the same here and I still get a hang with Ethernet. If I
manually remove Ethernet support from the defconfig then I am able to
get into the U-Boot prompt.
Could
Update README to use 4.19.35_1.1.0 released firmware images.
Signed-off-by: Peng Fan
---
board/freescale/imx8qxp_mek/README | 26 +++---
1 file changed, 11 insertions(+), 15 deletions(-)
diff --git a/board/freescale/imx8qxp_mek/README
b/board/freescale/imx8qxp_mek/README
in
11 matches
Mail list logo
