Re: Failsafe booting to alternate linux image/fs

r Architecture® processors" Is that accurate?  Is it not available for ARM processors (e.g. A9 CPU system within Xilinx Zynq 7000 series SoCs) ? Thanks, Brendan, -- On 28/5/20 5:14 pm, Brendan Simon (eTRIX) wrote: > Hi, > > Before I embark on my own implementation of a failsafe bootloadi

Failsafe booting to alternate linux image/fs

est place to go to get information/documentation on this?* Finally, I'm looking at migrating to EMMC, maybe with a golden image for failsafe use, and two partitions for current filesystem and next/upgrade filesystem. *Is there any documentation that might be a useful in this use case?* Thanks, Brendan.

Failsafe booting to alternate linux image/fs

est place to go to get information/documentation on this?* Finally, I'm looking at migrating to EMMC, maybe with a golden image for failsafe use, and two partitions for current filesystem and next/upgrade filesystem. *Is there any documentation that might be a useful in this use case?* Thanks, Brendan.

[U-Boot] [PATCH] arm: ls102xa: Fix RGMII phy-connection-type FDT fixup

In ft_fixup_enet_phy_connect_type(), use strlen() instead of sizeof() on the pointer result of phy_string_for_interface(). sizeof() was returning the size of the pointer (4 bytes), resulting in the phy-connection-type being set to "rgmi" rather than "rgmii-id". Signed-off-by

[U-Boot] How to validate ext4load file size (not null)?

I have stored multiple device trees in my emmc (ext4 formatted) partition and I want to load a certain device tree file from emmc, but if this fails (i.e. the device tree file doesn't exist) it should default to a device tree that is stored in memory. For example if I run this: I get a return

[U-Boot] How to validate ext4load file size (not null)?

I have stored multiple device trees in my emmc (ext4 formatted) partition and I want to load a certain device tree file from emmc, but if this fails (i.e. the device tree file doesn't exist) it should default to a device tree that is stored in memory. For example if I run this: I get a return

[U-Boot] Assigning u-boot environment variables from memory

I am storing some information regarding my board within EEPROM (in memory after I use the >eeprom read command) and I was wondering if it was possible for me to somehow read from memory and store the values into an environment variable. I have done a search but could not find anything of relevance

[U-Boot] How to test watchdog timer values and ensuring it is working as intended

Hello, I am using an Freescale/nxp mx6solo and I want to test that the watchdog timer is working as intended. I have enabled it on my board and have confirmed it during boot > U-Boot SPL 2015.04-g0f11429-dirty (Jan 18 2017 - 05:42:24) > > Part number: VSM-SOLO-102 > Assembly: AS151004858 > Date

[U-Boot] Enabling Watchdog Service on Variscite VAR-SOM-MX6 Solo

al as supplied by NXP (http://www.nxp.com/assets/documents/data/en/reference-manuals/IMX6SDLRM.pdf) Any help would be greatly appreciated. Regards, Brendan ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] Enable redundant u-boot environment for iMX6 (Yocto)

rate repository? Any help would be greatly appreciated, I cannot find any in depth documentation relating to this so I am looking for any resources available. Regards, Brendan -- View this message in context: http://u-boot.10912.n7.nabble.com/Enable-redundant-u-boot-environment-for-iMX6-Yocto-tp2

[U-Boot] VAR-SOM-MX6 - Boot Count Limit support?

Hello, I have a VAR-SOM-MX6 with the following details: Board: Variscite VAR_SOM_MX6 SOM-Solo SOC_FAMILY = "mx6:mx6q:mx6dl" PREFERRED_PROVIDER_virtual/kernel_var-som-mx6 ?= "linux-variscite" PREFERRED_VERSION_linux-imx_mx6 = "4.1.15" and the following u-boot details: U-Boot SPL 2013.10-00027-g5

Re: [U-Boot] fw_env.config settings for Digilent ZedBoard (Zynq 7020 Soc)

Hi. see inline comments below ... On 7/12/2015 8:35 PM, Anatolij Gustschin wrote: > On Sun, 6 Dec 2015 12:01:08 +1100 > "Brendan Simon (eTRIX)" wrote: > >> Here is info from /proc/mtd and my /etc/fw_env.config. >>

Re: [U-Boot] u-boot retries with fallback to other images

Hi Wolfgang, On 7/12/2015 5:23 PM, Wolfgang Denk wrote: > Dear Brendan, > > In message <5663b74e.7000...@etrix.com.au> you wrote: >> Is there any documentation or u-boot support for having a list of boot >> images to try, starting with the first in the list, trying 1, 2

[U-Boot] u-boot retries with fallback to other images

off partition 3 of eMMC, then partition2 of eMMC, then partition 2 of SD card, then tftp/nfs ? I've seen some info on google that says this is possible. I'm just looking for good documentation that can explain how to set it all up. Thank

[U-Boot] fw_env.config settings for Digilent ZedBoard (Zynq 7020 Soc)

How can I find out the correct settings. Is there a command in u-boot itself which will report the correct information? Thanks, Brendan. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] Hi, you are invited to uniqueBidWin.com - new reverse auction in North America

Hi, hope everything is well. I would like to invite you to www.uniqueBidWin.com . An auction where new Iphone 32Gs is sold for $7.07 Find a bonuss just for yourself. Want to make money from home, visit http://uniquebidwin.com/affiliate/ Best ___ U-Boot