Signed-off-by: Paolo Pisati
---
arch/arm/mach-bcm283x/reset.c | 21 ++---
board/raspberrypi/rpi/rpi.c| 4
drivers/watchdog/Kconfig | 15 +++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bcm2835_wdt.c | 35
The following patch add support for the watchdog built into the
bcm2835/2836 chips, using the max timeout (~15s).
Tested on my RaspberryPi2.
Changelog:
v2: fixed __eufi_runtime usage and moved to Kconfig
Paolo Pisati (1):
bcm2835_wdt: support for the BCM2835/2836 watchdog
arch/arm/mach
On Fri, Jan 27, 2017 at 04:20:10PM +, Brüns, Stefan wrote:
> > ...
> > +
> > __efi_runtime_data struct bcm2835_wdog_regs *wdog_regs =
> > (struct bcm2835_wdog_regs *)BCM2835_WDOG_PHYSADDR;
> >
> > -void __efi_runtime reset_cpu(ulong addr)
> > +void __efi_runtime reset_cpu(ulong ticks)
> >
Signed-off-by: Paolo Pisati
---
arch/arm/mach-bcm283x/reset.c | 21 ++---
board/raspberrypi/rpi/rpi.c| 4
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bcm2835_wdt.c | 34 ++
include/configs/rpi.h | 3 +++
scripts
@@ -109,6 +109,7 @@
/* Watchdog support */
#define CONFIG_BCM2835_WDT
+#define CONFIG_HW_WATCHDOG
/* Console configuration */
#define CONFIG_SYS_CBSIZE 1024
--
2.7.4
Tested on my RaspberryPi2.
Paolo Pisati (1):
bcm2835_wdt: support for the BCM2835/2836 watchdog
arch/arm/mach
Signed-off-by: Paolo Pisati
---
arch/arm/mach-bcm283x/reset.c | 21 ++---
board/raspberrypi/rpi/rpi.c| 4
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bcm2835_wdt.c | 34 ++
include/configs/rpi.h | 3 +++
scripts
@@
/* Watchdog support */
#define CONFIG_BCM2835_WDT
+#define CONFIG_HW_WATCHDOG
/* Console configuration */
#define CONFIG_SYS_CBSIZE 1024
--
2.7.4
Tested on my RaspberryPi2.
Paolo Pisati (1):
bcm2835_wdt: support for the BCM2835/2836 watchdog
arch/arm/mach-bcm283x/reset.c | 21
ghosts here.
On Wed, Oct 8, 2014 at 10:00 AM, Guillaume Gardet
wrote:
> I used the following values with 2014.10-rc2:
> kerneladdr=0x4400
> ramdiskaddr=0x4500
> fdtaddr=0x4c00
>
> But I used a zImage. If you use a uImage, you need to modify the kernel load
> a
those are the addresses suggested by u-boot and yes, i already tried
moving stuff around but it didn't fix it: what's the working config
with your board? u-boot version?
On Tue, Oct 7, 2014 at 4:34 PM, Guillaume Gardet
wrote:
> Hi,
>
> Le 07/10/2014 14:58, Paolo Pisat
Hi,
i've been trying to update the u-boot on my board (sd booting), from the Linaro
one (2012.10) to a v2014.X, but so far had no luck:
make arndale_config
export CROSS_COMPILE=/usr/bin/arm-linux-gnueabihf-
make
...
dd if=arndale-bl1.bin of=/dev/sdc bs=512 skip=1
dd if=arndale-spl.bin of=/dev/s
10 matches
Mail list logo
