2015-04-03 16:26 GMT+02:00 Michael Trimarchi :
> Hi
>
> Increase the divisor of the clock
>
> MXC_CCM_CSCDR1_USDHC[X]_PODF_MASK
> MXC_CCM_CSCDR1_USDHC[X]_PODF_OFFSET
>
> I'm not sure because I have not a board and no time before Easter
> to open documentation ;)
>
> Michael
>
Hi Michael,
the reg
2015-03-30 17:32 GMT+02:00 Marco Cavallini :
> Hello,
> I am probably working on a 'buggy hardware' based on i.MX6 that isn't
> able to manage a SDcard speed properly.
> I mean, u-boot starts, but as soon as I try to perform a fatload if
> the uImage the command wo
Hello,
I am probably working on a 'buggy hardware' based on i.MX6 that isn't
able to manage a SDcard speed properly.
I mean, u-boot starts, but as soon as I try to perform a fatload if
the uImage the command won't work properly.
I had the possibility to test the SoM on another carrier with a
differ
Signed-off-by: Marco Cavallini
---
arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 18 ++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index a744e5d..9e11288 100644
--- a/arch/arm/cpu
2015-02-23 16:03 GMT+01:00 Otavio Salvador :
> On Mon, Feb 23, 2015 at 11:57 AM, Marco Cavallini
> wrote:
>> 2015-02-23 15:20 GMT+01:00 Fabio Estevam :
>>> Hi Marco,
>>>
>>> On Mon, Feb 23, 2015 at 11:11 AM, Marco Cavallini
>>> wrote:
>>>
2015-02-23 15:20 GMT+01:00 Fabio Estevam :
> Hi Marco,
>
> On Mon, Feb 23, 2015 at 11:11 AM, Marco Cavallini
> wrote:
>> Hello,
>>
>> I'd like to know if exists a method to store in eMMC a bootolader
>> without kobs-ng, so without using linux, but simp
Hello,
I'd like to know if exists a method to store in eMMC a bootolader
without kobs-ng, so without using linux, but simply running a command
from u-boot.
I booted my i.MX28 system (I have the same question for i.MX6 as well)
using the u-boot.sb (u-boot-2015.01 with SPL) file loaded with mxsldr
(
Hello,
I'm trying to send a patch using my gmail web account, but I
continuosly receive the following message.
"Message rejected. No base64 encoded MIME text parts allowed"
Is there a solution?
TIA
--
Marco
___
U-Boot mailing list
U-Boot@lists.denx.de
h
a patch, I hope it is ok.
0001-spl_mem_init.c-Added-support-for-mDDR-in-SPL-for-i.M.patch
Cheers,
--
Marco Cavallini | KOAN sas | Bergamo - Italia
embedded and real-time software engineering
Phone:+39-035-255.235 - Fax:+39-178-22.39.748
http://ww
2015-02-21 15:00 GMT+01:00 Fabio Estevam :
> Hi Marco,
>
> [Please keep the list on Cc.]
>
>
> On Sat, Feb 21, 2015 at 11:13 AM, Marco Cavallini
> wrote:
>
>> Hi Fabio,
>> I moved to u-boot GIT master today (21 Feb 2015)
>> I set up my DDR s
2015-02-12 16:57 GMT+01:00 Marco
> Hi,
> On a custom i.MX28 board I am using u-boot-2015.01.
> The debug port DUART is not the same as i.MX28, so I changed these
> settings in iomux.c:
>
> const iomux_cfg_t iomux_setup[] = {
> /* DUART */
> // MX28_PAD_PWM0__DUART_RX,
> // MX28_PAD_PWM1__DUART_TX
"Your mail to 'U-Boot' is being held until the list moderator can
review it for approval."
Is this list moderated ?
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi,
On a custom i.MX28 board I am using u-boot-2015.01.
The debug port DUART is not the same as i.MX28, so I changed these
settings in iomux.c:
const iomux_cfg_t iomux_setup[] = {
/* DUART */
// MX28_PAD_PWM0__DUART_RX,
// MX28_PAD_PWM1__DUART_TX,
/* DUART */
/* Unconfigure BOOT ROM default
n see that it freeze in:
> cmd_flash.c
> 434: printf ("Erased %d sectors\n", erased);
> after uboot partition erasing.
>
>
> Can you help me?
Posting output messages of the procedure may help.
Cordiali Saluti / Kindest Regards / mit freundlichen Grüssen
--
Marco Cavallini
o I have to unsubscribe sourceforge one ?
TIA
Best regards
--
/marco cavallini
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
15 matches
Mail list logo
