0xb0):
relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol
`usb_get_dr_mode'
Do not compile drivers/usb/ for TPL.
Signed-off-by: FUKAUMI Naoki
---
scripts/Makefile.xpl | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/scripts/Makefile.xpl b/scripts/Mak
+0x24):
undefined reference to `set_dfu_alt_info'
Compile mach-rockchip/board.c for SPL.
Signed-off-by: FUKAUMI Naoki
---
arch/arm/mach-rockchip/Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 5
age/u-boot-spl/u-boot-spl-nodtb': Entry
'u-boot-any' not found in list
(u-boot-tpl-nodtb,u-boot-tpl-dtb,u-boot-tpl,u-boot-spl-nodtb,u-boot-spl-dtb,u-boot-spl,mkimage,fit,simple-bin-spi)
Add "no-write-symbols;" to u-boot-tpl and u-boot-spl.
Signed-off-by: FUKAUMI Naoki
-
From: Cristian Ciocaltea
Add support for the HDMI0 output port found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea
Link:
https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-1-466cd80e8...@collabora.com
Signed-off-by: Heiko Stuebner
[ upstream commit: d7bb71e69f58c1b3665a9f926bf8d3855111
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST port
- 1x USB Type-C 5V power port
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20241021090548.1052-2-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
---
Changes in v5:
- None
Changes in v4:
- ROCK 5A section was removed and most of it rewritten for ROCK 5C
- Trivial changes
Changes in v3:
- Fix compile
Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
Changes in v5:
- Rebase on top of latest next branch
- Drop PATCH 1/5
Cristian Ciocaltea (1):
arm64: dts: rockchip: Add HDMI0 node to rk3588
FUKAUMI Naoki (2):
arm64: dts: rockchip: add Radxa ROCK 5C
rockchip: Add support
From: Sam Edwards
These pinctrls manage the low-speed PCIe signals:
- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to
request that external clock-generation circuitry provide a clock.
- PERST#: An input on the RK3588 in EP mode, used to detect a reset
signal from the RC. In RC
Hi Sumit,
On 1/3/25 21:53, Sumit Garg wrote:
Hi FUKAUMI,
On Fri, 3 Jan 2025 at 18:02, FUKAUMI Naoki wrote:
Enable pcie2x1l2 and related combphy/regulator routed to M.2 E key
connector on Radxa ROCK 5A.
Tested with Radxa Wireless Module A8:
$ lspci
0004:40:00.0 PCI bridge: Rockchip
From: Sam Edwards
These pinctrls manage the low-speed PCIe signals:
- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to
request that external clock-generation circuitry provide a clock.
- PERST#: An input on the RK3588 in EP mode, used to detect a reset
signal from the RC. In RC
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
---
Changes in v4:
- ROCK 5A section was removed and most of it rewritten for ROCK 5C
- Trivial changes
Changes in v3:
- Fix compile error
Changes in v2
: Primary Bus: USB
BD Address: 2C:05:47:65:5B:EE ACL MTU: 1021:6 SCO MTU: 255:12
UP RUNNING
RX bytes:2698 acl:0 sco:0 events:329 errors:0
TX bytes:69393 acl:0 sco:0 commands:329 errors:0
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20240826080456.525-1-na
Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
Cristian Ciocaltea (1):
arm64: dts: rockchip: Add HDMI0 node to rk3588
FUKAUMI Naoki (3):
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: add Radxa ROCK 5C
rockchip: Add support for
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST port
- 1x USB Type-C 5V power port
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20241021090548.1052-2-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream
From: Cristian Ciocaltea
Add support for the HDMI0 output port found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea
Link:
https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-1-466cd80e8...@collabora.com
Signed-off-by: Heiko Stuebner
(cherry picked from commit d7bb71e69f58c1b3665a9f926bf8d
Hi Kever,
On 1/3/25 18:57, Kever Yang wrote:
Hi Naoki,
On 2024/12/11 11:39, FUKAUMI Naoki wrote:
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
---
Changes in v3:
- fix compile error
Changes in v2
Hi Quentin,
On 12/16/24 21:47, Quentin Schulz wrote:
Hi Naoki,
On 12/16/24 1:39 PM, FUKAUMI Naoki wrote:
Hi Quentin,
On 12/16/24 18:57, Quentin Schulz wrote:
Hi Naoki,
On 12/15/24 2:37 AM, FUKAUMI Naoki wrote:
Hi Quentin,
Thank you very much for your review!
On 12/13/24 22:11, Quentin
Hi Quentin,
On 12/16/24 18:57, Quentin Schulz wrote:
Hi Naoki,
On 12/15/24 2:37 AM, FUKAUMI Naoki wrote:
Hi Quentin,
Thank you very much for your review!
On 12/13/24 22:11, Quentin Schulz wrote:
Hi Naoki,
On 12/11/24 4:39 AM, FUKAUMI Naoki wrote:
Radxa ROCK 5C[1] is a Rockchip RK3588S2
Hi Quentin,
Thank you very much for your review!
On 12/13/24 22:11, Quentin Schulz wrote:
Hi Naoki,
On 12/11/24 4:39 AM, FUKAUMI Naoki wrote:
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
Radxa ROCK 5C Lite[1] is a RK3582 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
---
this patch depends on follwing patches:
-
https://patchwork.ozlabs.org/project/uboot/patch/20241210222341.3537543-2-jo...@kwiboo.se/
-
https
Karlman
Tested-by: FUKAUMI Naoki
ROCK 5C Lite
cpu-code: 35 82
ip-state: 10 00 00
fail gpu
fail cpu cpu@400
fail cpu cpu@500
Radxa E52C
cpu-code: 35 82
ip-state: 00 02 00
fail gpu
fail cpu cpu@600
fail cpu cpu@700
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
---
arch
Hi Jonas,
Is it better to apply following patch series with this patch series?
rockchip: rk35xx: Implement checkboard() to print SoC variant
https://patchwork.ozlabs.org/project/uboot/cover/20241110005622.1515100-1-jo...@kwiboo.se/
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
---
Changes in v3:
- fix compile error
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix
: Primary Bus: USB
BD Address: 2C:05:47:65:5B:EE ACL MTU: 1021:6 SCO MTU: 255:12
UP RUNNING
RX bytes:2698 acl:0 sco:0 events:329 errors:0
TX bytes:69393 acl:0 sco:0 commands:329 errors:0
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20240826080456.525-1-na
From: Sam Edwards
These pinctrls manage the low-speed PCIe signals:
- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to
request that external clock-generation circuitry provide a clock.
- PERST#: An input on the RK3588 in EP mode, used to detect a reset
signal from the RC. In RC
From: Cristian Ciocaltea
Add support for the HDMI0 output port found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea
Link:
https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-1-466cd80e8...@collabora.com
Signed-off-by: Heiko Stuebner
(cherry picked from commit d7bb71e69f58c1b3665a9f926bf8d
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST port
- 1x USB Type-C 5V power port
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20241021090548.1052-2-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream
Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
Cristian Ciocaltea (1):
arm64: dts: rockchip: Add HDMI0 node to rk3588
FUKAUMI Naoki (3):
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: add Radxa ROCK 5C
rockchip: Add support for
I'm sorry, both v1 and v2 patch series cannot be compiled.
I'll submit v3 soon (I confirmed it can be compiled)
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 12/11/24 12:26, FUKAUMI Naoki wrote:
Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
Cristian Ci
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
---
Changes in v2:
- arch/arm/dts/rk3588s-rock-5-u-boot.dtsi: remove unused node
- include/configs/rock-5-rk3588s.h: fix include order
---
arch/arm/dts
From: Sam Edwards
These pinctrls manage the low-speed PCIe signals:
- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to
request that external clock-generation circuitry provide a clock.
- PERST#: An input on the RK3588 in EP mode, used to detect a reset
signal from the RC. In RC
: Primary Bus: USB
BD Address: 2C:05:47:65:5B:EE ACL MTU: 1021:6 SCO MTU: 255:12
UP RUNNING
RX bytes:2698 acl:0 sco:0 events:329 errors:0
TX bytes:69393 acl:0 sco:0 commands:329 errors:0
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20240826080456.525-1-na
Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
Cristian Ciocaltea (1):
arm64: dts: rockchip: Add HDMI0 node to rk3588
FUKAUMI Naoki (3):
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: add Radxa ROCK 5C
rockchip: Add support for
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST port
- 1x USB Type-C 5V power port
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20241021090548.1052-2-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream
From: Cristian Ciocaltea
Add support for the HDMI0 output port found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea
Link:
https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-1-466cd80e8...@collabora.com
Signed-off-by: Heiko Stuebner
(cherry picked from commit d7bb71e69f58c1b3665a9f926bf8d
From: Sam Edwards
These pinctrls manage the low-speed PCIe signals:
- CLKREQ#: An output on the RK3588 (both RC or EP modes), used to
request that external clock-generation circuitry provide a clock.
- PERST#: An input on the RK3588 in EP mode, used to detect a reset
signal from the RC. In RC
From: Cristian Ciocaltea
Add support for the HDMI0 output port found on RK3588 SoC.
Signed-off-by: Cristian Ciocaltea
Link:
https://lore.kernel.org/r/20241019-rk3588-hdmi0-dt-v2-1-466cd80e8...@collabora.com
Signed-off-by: Heiko Stuebner
(cherry picked from commit d7bb71e69f58c1b3665a9f926bf8d
Radxa ROCK 5C[1] is a Rockchip RK3588S2 based single board computer.
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3588s-rock-5-u-boot.dtsi | 24 ++
arch/arm/dts/rk3588s-rock-5c-u-boot.dtsi| 6 ++
arch/arm/mach-rockchip/rk3588/Kconfig
- 1x USB 3.0 Type-A HOST port
- 1x USB 3.0 Type-A OTG port
- 2x USB 2.0 Type-A HOST port
- 1x USB Type-C 5V power port
[1] https://radxa.com/products/rock5/5c
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20241021090548.1052-2-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream
: Primary Bus: USB
BD Address: 2C:05:47:65:5B:EE ACL MTU: 1021:6 SCO MTU: 255:12
UP RUNNING
RX bytes:2698 acl:0 sco:0 events:329 errors:0
TX bytes:69393 acl:0 sco:0 commands:329 errors:0
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20240826080456.525-1-na
Radxa ROCK 5C is a Rockchip RK3588S2 based single board computer.
Cristian Ciocaltea (1):
arm64: dts: rockchip: Add HDMI0 node to rk3588
FUKAUMI Naoki (3):
arm64: dts: rockchip: enable PCIe on M.2 E key for Radxa ROCK 5A
arm64: dts: rockchip: add Radxa ROCK 5C
rockchip: Add support for
On 12/3/24 11:39, FUKAUMI Naoki wrote:
Hi,
I'm thinking to do same (or similar) fix for RK3328 too.
that configuration should work with 512MB RAM device, right?
I noticed there is 256MB RK3328 device. I need to think about it.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhe
Hi,
I'm thinking to do same (or similar) fix for RK3328 too.
that configuration should work with 512MB RAM device, right?
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 12/3/24 08:40, FUKAUMI Naoki wrote:
fix following error by using same ENV_MEM_LAYOUT_SETTINGS
space for decompressed kernel")
Signed-off-by: FUKAUMI Naoki
---
include/configs/rk3399_common.h | 16
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h
index c5bcd7dc5e8a..76f40e7cd5f8 100644
---
000f1edb820
Code: aa0003e2 d280 eb01001f 5460 (78607843)
Resetting CPU ...
resetting ...
Fix this by setting update_info.num_images to 0 when no valid update
images is added to update_info.
Signed-off-by: Jonas Karlman
Reviewed-by: Kever Yang
Tested-by: FUKAUMI Naoki
t
+)
Model: Generic RK3588S/RK3588
SoC: RK3588S2
DRAM: 8 GiB
Information about the SoC model and variant is read from OTP.
Also update rk3588s-u-boot.dtsi to include OTP in U-Boot pre-reloc phase,
where checkboard() is called.
Signed-off-by: Jonas Karlman
Tested-by: FUKAUMI Naoki
-by: FUKAUMI Naoki
SoC: RK3566
SoC: RK3566T
SoC: RK3568
SoC: RK3568J
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
---
v3:
- Fix build issue with MISC=n or ROCKCHIP_OTP=n
- Remove use of cpu-version
- Use log_debug() instead of debug()
v2:
- Update commit message
enable RK806 SPI PMIC driver and related cmd/configs for Radxa ROCK 5B.
Signed-off-by: FUKAUMI Naoki
---
configs/rock5b-rk3588_defconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
index 47ee2109f8e..cf10965cf0f
enable RK806 SPI PMIC driver and related cmd/configs for Radxa ROCK 5A.
Signed-off-by: FUKAUMI Naoki
---
configs/rock5a-rk3588s_defconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/configs/rock5a-rk3588s_defconfig b/configs/rock5a-rk3588s_defconfig
index 9618d590009..d2770198ef2
run savedefconfig for next patch for Radxa ROCK 5B.
Signed-off-by: FUKAUMI Naoki
---
configs/rock5b-rk3588_defconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/configs/rock5b-rk3588_defconfig b/configs/rock5b-rk3588_defconfig
index c54e13e8732..47ee2109f8e 100644
Hi,
On 10/30/24 19:39, Quentin Schulz wrote:
Hi Naoki,
On 10/30/24 4:09 AM, FUKAUMI Naoki wrote:
Hi,
could you review this patch, anyone?
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/25/24 07:33, FUKAUMI Naoki wrote:
on Radxa ROCK 5A, sdhci(eMMC) and fspim0(SPI
Hi,
On 10/30/24 23:24, Eugen Hristev wrote:
On 10/30/24 08:30, Kever Yang wrote:
Hi Naoki,
On 2024/10/30 14:07, FUKAUMI Naoki wrote:
on Radxa ROCK 5A, sdhci(eMMC) and fspim0(SPI NOR flash) share pins
(i.e. eMMC and SPI NOR flash are exclusive), new defconfig and dts
specifically for SPI
on Radxa ROCK 5A, sdhci(eMMC) and fspim0(SPI NOR flash) share pins
(i.e. eMMC and SPI NOR flash are exclusive), new defconfig and dts
specifically for SPI NOR flash is required.
Signed-off-by: FUKAUMI Naoki
---
Changes in v3
- drop first patch
- fix copyright
- run savedefconfig
- sync with
Hi,
could you review this patch, anyone?
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/25/24 07:33, FUKAUMI Naoki wrote:
on Radxa ROCK 5A, sdhci(eMMC) and fspim0(SPI NOR flash) share pins
(i.e. eMMC and SPI NOR flash are exclusive), new defconfig and dts
Hi,
dts/upstream/src/ inclues this change now, please ignore this patch.
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/25/24 07:33, FUKAUMI Naoki wrote:
This commit adds SFC node for Radxa ROCK 5A.
since sdhci and sfc on RK3588s share pins(i.e. exclusive), it cannot
be enabled
, I'll do what I should do ;)
thanks.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
Thanks,
- Kever
On 2024/8/25 06:08, FUKAUMI Naoki wrote:
some SKU for CM3I SoM have a SPI NOR flash. this patch enables related
configurations and changes devicetree.
=> sf
hi,
On 9/10/24 19:11, Kever Yang wrote:
Hi Naoki,
On 2024/8/27 09:31, FUKAUMI Naoki wrote:
since Radxa ROCK Pi E v3.0 is different to ROCK Pi E, "model" and
"compatible" in DT need to be different.
(specifically, sysupgrade[1] in OpenWrt)
also, "mmc0" and "
sorry, this patch seems to be wrong.
I'll check it again.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/28/24 21:15, FUKAUMI Naoki wrote:
invert gpio state if GPIO_ACTIVE_LOW is specified in dts.
Signed-off-by: FUKAUMI Naoki
---
drivers/led/led_gpio.
invert gpio state if GPIO_ACTIVE_LOW is specified in dts.
Signed-off-by: FUKAUMI Naoki
---
drivers/led/led_gpio.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/led/led_gpio.c b/drivers/led/led_gpio.c
index ce22fb49f2a..54aa84e0726 100644
--- a/drivers/led/led_gpio.c
+++ b
them after loading DT for kernel.
[1] https://openwrt.org/docs/techref/sysupgrade#how_it_works
Signed-off-by: FUKAUMI Naoki
---
arch/arm/mach-rockchip/rk3328/Kconfig | 6 ++
board/radxa/rockpie-rk3328/Kconfig | 12 +++
board/radxa/rockpie-rk3328/MAINTAINERS |
hi,
On 8/27/24 01:11, Quentin Schulz wrote:
Hi Naoki,
On 8/25/24 12:07 AM, FUKAUMI Naoki wrote:
some SKU for CM3I SoM have a SPI NOR flash. this patch enables related
configurations and changes devicetree.
=> sf probe
SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB,
to
ry, so use safe(lowest) spi-max-frequency.
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20240623023329.1044-2-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream commit: 00224650dd45e166ea6eb1593f5f064583963ccf ]
(cherry picked from commit fde218de3133705f3f56dc8eb26baa
on Radxa ROCK 5A, sdhci(eMMC) and fspim0(SPI NOR flash) share pins
(i.e. eMMC and SPI NOR flash are exclusive), new defconfig and dts
specifically for SPI NOR flash is required.
Signed-off-by: FUKAUMI Naoki
---
Changes in v2
- fix subject
---
arch/arm/dts/rk3588s-rock-5a-spi-u-boot.dtsi | 24
sorry, please ignore this patch.
https://patchwork.ozlabs.org/project/uboot/patch/20240808222325.2082-2-na...@radxa.com/
is right one.
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/16/24 09:12, FUKAUMI Naoki wrote:
Basically, Radxa's boards are intended to turn LEDs on at U
sorry, please ignore this patch.
https://patchwork.ozlabs.org/project/uboot/patch/20240808222325.2082-1-na...@radxa.com/
is right one.
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/16/24 09:12, FUKAUMI Naoki wrote:
Basically, Radxa's boards are intended to turn LEDs on at U
sorry, please ignore this patch.
https://patchwork.ozlabs.org/project/uboot/patch/20240824220847.98136-1-na...@radxa.com/
is right one.
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/25/24 07:07, FUKAUMI Naoki wrote:
some SKU for CM3I SoM have a SPI NOR flash. this patch enables
some SKU for CM3I SoM have a SPI NOR flash. this patch enables related
configurations and changes devicetree.
=> sf probe
SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB, total 16 MiB
Signed-off-by: FUKAUMI Naoki
---
Changes in v2:
- reword commit message
---
arch/arm/
some SKU for CM3I SoM have a SPI NOR flash. this patch enables related
configurations and changes devicetree.
=> sf probe
SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB, total 16 MiB
Signed-off-by: FUKAUMI Naoki
---
Changes in v2:
- reword commit message
---
arch/arm/
sorry, I'll send v2 tomorrow to rewrite terrible commit message...
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/24/24 18:00, FUKAUMI Naoki wrote:
my CM3I has a w25q128fw, so add support for it.
=> sf probe
SF: Detected w25q128fw with page size 256 Bytes, erase size 4 Ki
my CM3I has a w25q128fw, so add support for it.
=> sf probe
SF: Detected w25q128fw with page size 256 Bytes, erase size 4 KiB, total 16 MiB
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3568-radxa-e25-u-boot.dtsi | 16
configs/radxa-e25-rk3568_defconfig|
ry, so use safe(lowest) spi-max-frequency.
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20240623023329.1044-2-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream commit: 00224650dd45e166ea6eb1593f5f064583963ccf ]
(cherry picked from commit fde218de3133705f3f56dc8eb26baa
on Radxa ROCK 5A, sdhci(eMMC) and fspim0(SPI NOR flash) share pins
(i.e. eMMC and SPI NOR flash are exclusive), new defconfig and dts
specifically for SPI NOR flash is required.
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3588s-rock-5a-spi-u-boot.dtsi | 24 ++
arch/arm/dts/rk3588s-rock
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
add `default-state = "on"` to u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki
---
this patch depends on
https://patchwork.ozlabs.org/project/uboot/patch/20240815223713.2479-1-na...@radxa.com/
---
.../arm/dts/rk3328-r
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
enable gpio-leds driver and led command.
Signed-off-by: FUKAUMI Naoki
---
configs/radxa-cm3-io-rk3566_defconfig | 2 ++
configs/radxa-e25-rk3568_defconfig| 2 ++
configs/rock-3a-rk3568_defconfig | 2 ++
configs/ro
ned-off-by: FUKAUMI Naoki
---
Changes in v2:
- reword commit message
---
arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi | 16 ++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi
b/arch/arm/dts/rk3399-rock-4c-plus-u-boot.
series,
Tested-by: FUKAUMI Naoki
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
---
configs/rock-pi-s-rk3308_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/configs/rock-pi-s-rk3308_defconfig
b/configs/rock-pi-s-rk3308_defconfig
index e450a0618020
Hi,
On 8/9/24 18:16, Kever Yang wrote:
On 2024/8/9 06:19, FUKAUMI Naoki wrote:
Radxa ROCK Pi 4 series and Radxa ROCK 4C+ are not compatible.
A little bit more detail about why not compatible?
The eMMC is different?
I should say "ROCK Pi 4 series and ROCK 4C+ cannot share dts
x27;t happen,
device is recognized properly.
if it's okay,
Tested-by: FUKAUMI Naoki
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
---
v6:
update dts to turn LED up in U-Boot
v5:
fixed board info
v4:
fixed typo in commit-msg
moved m
sorry, please ignore this patch.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/2/24 11:49, FUKAUMI Naoki wrote:
on-board USB 2.0 hub, FE1.1s, has Transaction Translator which can
handle USB 1.x devices via "usb_host0_ehci". so we can omit
"usb_host0
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
add `default-state = "on"` to u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki
---
Changes in v2:
- remove irrelevant contents from rk3399-rock-4c-plus-u-boot.dtsi
- depend
https://patchwork.ozlabs.org/proj
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
enable gpio-leds driver and led command.
Signed-off-by: FUKAUMI Naoki
---
Changes in v2:
- none
---
configs/radxa-cm3-io-rk3566_defconfig | 2 ++
configs/radxa-e25-rk3568_defconfig| 2 ++
configs/rock-3a-rk3568_defc
Radxa ROCK Pi 4 series and Radxa ROCK 4C+ are not compatible. add
rk3399-rock-pi-4-u-boot.dtsi contents and remove dependency of it.
no functional change is intended.
Fixes: 71a95e2efd30 ("arm: dts: rockchip: add Radxa ROCK 4C+")
Suggested-by: Dragan Simic
Signed-off-by: FUK
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
enable gpio-leds driver and led command.
Signed-off-by: FUKAUMI Naoki
---
configs/radxa-cm3-io-rk3566_defconfig | 2 ++
configs/radxa-e25-rk3568_defconfig| 2 ++
configs/rock-3a-rk3568_defconfig | 2 ++
configs/ro
Basically, Radxa's boards are intended to turn LEDs on at U-Boot.
add `default-state = "on"` to u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki
---
.../arm/dts/rk3328-rock-pi-e-base-u-boot.dtsi | 6 +
arch/arm/dts/rk3399-rock-4c-plus-u-boot.dtsi | 25 ++-
arch
56x-u-boot.dtsi"
please add
```
/ {
leds {
led-0 {
default-state = "on";
};
};
};
```
to turn LED on at U-Boot. (make CONFIG_LED_GPIO work)
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
+&a
USB Type-C port is configured as "peripheral" port. so enable "ums"
command to use as USB Mass Storage device.
("rockusb" command is already enabled and working)
Signed-off-by: FUKAUMI Naoki
---
configs/rock5b-rk3588_defconfig | 1 +
1 file changed, 1 insertion(+
"usb_host1_xhci" and related node were already upstreamed. remove
unnecessary properties from u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 17 -
1 file changed, 17 deletions(-)
diff --git a/arch/arm/dts/rk3588-rock-5b-u-bo
"sfc" node was already upstreamed. remove unnecessary properties from
u-boot.dtsi.
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 9 -
1 file changed, 9 deletions(-)
diff --git a/arch/arm/dts/rk3568-rock-3a-u-boot.dtsi
b/arch/arm/dts/rk3568
sorry, please ignore this patch.
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/6/24 09:09, FUKAUMI Naoki wrote:
sort nodes alphanumerically.
no functional change is intended.
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 4 ++--
1
sort nodes alphanumerically.
no functional change is intended.
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3588-rock-5b-u-boot.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
b/arch/arm/dts/rk3588-rock-5b-u-boot.dtsi
SPI NOR flash chip may vary, so use safe(lowest) spi-max-frequency.
Signed-off-by: FUKAUMI Naoki
Link: https://lore.kernel.org/r/20240623023329.1044-3-na...@radxa.com
Signed-off-by: Heiko Stuebner
[ upstream commit: 06f6dd4d607766a527e37529f2f3f90dd1464293 ]
(cherry picked from commit
hi,
please don't merge this for a while.
I'm thinking opposite change may be better to align with ROCK 4/5
series. (OTG port is "host")
any comment?
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
On 8/2/24 11:58, FUKAUMI Naoki wrote:
since dr_mode of "usb
sorry,
On 8/2/24 10:54, FUKAUMI Naoki wrote:
since USB Type-A OTG port is peripheral mode, you can enable USB gadget
functions. could you merge following patch?
it's wrong.
"usb_host0_xhci" dr_mode need to be deleted...
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
since dr_mode of "usb_host0_xhci" is "otg", we can use USB gadget
functions on USB3 Type-A OTG (upper) port. enable it.
Signed-off-by: FUKAUMI Naoki
---
configs/rock-3a-rk3568_defconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/configs/rock-3a-rk3568_defconf
JetFlash Mass Storage Device 02K1RNH5MJFV4TX6
1 Hub (480 Mb/s, 0mA)
u-boot EHCI Host Controller
1 Hub (12 Mb/s, 0mA)
U-Boot Root Hub
Signed-off-by: FUKAUMI Naoki
---
arch/arm/dts/rk3568-rock-3a-u-boot.dtsi | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/d
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
CONFIG_ERRNO_STR=y
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
diff --git a/doc/board/rockchip/rockchip.rst b/doc/board/rockchip/rockchip.rst
index bed
3B 8GB v1.51 (both variants):
- SD-card boot
- eMMC boot
- SPI Flash boot
- Ethernet
- PCIe/NVMe
- USB gadget
- USB host
Signed-off-by: Jonas Karlman
for the whole series,
Tested-by: FUKAUMI Naoki
thank you so much for your contribution!
Best regards,
--
FUKAUMI Naoki
Radxa Computer
gadget
- USB host
Signed-off-by: Jonas Karlman
for whole series,
Tested-by FUKAUMI Naoki
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
---
arch/arm/dts/rk3566-radxa-zero-3e-u-boot.dtsi | 11 +++
arch/arm/dts/rk3566-radxa-zero-3w-u-boot.dtsi | 11 +++
arch/arm/mach
sn't happen on RadxaZERO 3E
does it happen on your board?
- 3.5mm jack with mic
- HDMI 2.0, MIPI DSI/CSI
- USB 3.0 Host/OTG, USB 2.0 Host
OTG is USB2.0 (upper) port
https://radxa.com/products/rock3/3c/#techspec
Best regards,
--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.
- 40
Hi
On 7/17/24 13:31, Kever Yang wrote:
Hi Naoki,
On 2024/6/18 17:53, FUKAUMI Naoki wrote:
this is cosmetic change. no functional change is intended.
- remove redundant white spaces
- replace white spaces with tab
- align position of last letter/word
- sort lines in CFG_EXTRA_ENV_SETTINGS
1 - 100 of 172 matches
Mail list logo
