Re: Help needed with uboot for CHIP

Hello, Le 10/03/2021 à 19:58, Gunjan Gupta a écrit : PFA my dts file. I have added the nfc section there as without that U-Boot was giving a message about nfc being disabled in the dts. Regarding trying the default config, I can't really do that as that doesn't support booting from NAND and I w

Re: Help needed with uboot for CHIP

Le 10/03/2021 à 18:32, Gunjan Gupta a écrit : Hi Alexandre, I saw your patch on the U-boot mailing list. I am trying to get the latest U-boot working on the CHIP with Hynix NAND and need your help with the same. I am using al

[PATCH] sunxi: board: Splitting CHIP defconfig for nand.

compagny script "chip-update-firmware.sh" Signed-off-by: Alexandre GRIVEAUX --- ...CHIP_defconfig => CHIP_Hynix_8G_defconfig} | 21 +--- configs/CHIP_Toshiba_4G_defconfig | 32 +++ 2 files changed, 49 insertions(+), 4 deletions(-) rename configs/{C

Re: Z-Turn board support on U-Boot 2020.10-rc2, got some errors.

On 24/08/2020 13:31, Michal Simek wrote : > Hi, > Hi > It looks like that manufacturer created different versions where they > are not compatible to each other. Please take a look at this thread. > https://www.spinics.net/lists/arm-kernel/msg800078.html > > I didn't accepted the patch because none

Z-Turn board support on U-Boot 2020.10-rc2, got some errors.

Hello, I've tried the u-boot 2020.10-rc2 and it's seem i've got some errors: U-Boot 2020.10-rc2-00204-gc84341f5ac (Aug 24 2020 - 09:49:25 +0200) CPU:   Zynq 7z020 Silicon: v3.1 Model: Zynq Z-Turn MYIR Board DRAM:  ECC disabled 1 GiB Flash: 0 Bytes NAND:  0 MiB MMC:   mmc@e010: 0 Loading En

Re: [U-Boot] Help/Clue to improve Z-turn board support

Le 2019-01-15 13:53, Alexandre GRIVEAUX a écrit : Hello, I tried to have mainline uboot for Z-turn board (patch sent in December, wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board) Even with the right ps7_init_gpl.c : the board doesn't boot. I tried to correct

[U-Boot] Help/Clue to improve Z-turn board support

Hello, I tried to have mainline uboot for Z-turn board (patch sent in December, wrong window: [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board) Even with the right ps7_init_gpl.c : the board doesn't boot. I tried to correct zynq-zturn.dts [0] because I don't find MYIR references in d

Re: [U-Boot] ZYNQ ZC706 Board

Hi, Have you make copy of boot.bin from SPL folder to your boot partition ? Thanks. Le 09/10/2018 à 09:29, Rama Chandra a écrit : > Hi sir, > i am using ZYNQ ZC706 Board and i have downloaded > u-boot(2016.7),uImage,root file system files from wiki.xilinx.com website > downloaded and properly