rk3036 soc has limit internal sram, and not able to support spl
framework.
Signed-off-by: Kever Yang
---
common/spl/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index e7b84fc1fa6..9deee0fdbea 100644
--- a/common/spl/Kconfi
The CONFIG_SPL_STACK for rk3036 is removed in below patch, need to add
it back.
Fixes: f113d7d3034 ("Convert CONFIG_SPL_STACK to Kconfig")
Signed-off-by: Kever Yang
---
configs/evb-rk3036_defconfig | 1 +
configs/kylin-rk3036_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/con
Hi Tom,
On 2024/1/24 09:34, Tom Rini wrote:
On Wed, Jan 24, 2024 at 09:15:07AM +0800, Kever Yang wrote:
Hi Tom,
On 2024/1/24 01:58, Tom Rini wrote:
On Tue, Jan 23, 2024 at 11:53:18AM +0800, Kever Yang wrote:
Hi Tom,
rk3036 only has small size internal sram, so it can only use very
simple S
That's most probably a typo, because driver model design documents seem
to be from 2012 and there is no 2010.01 release.
Fixes: 282ed24fb3ca ("dm: MIGRATION: Add migration plan for CONFIG_DM")
Signed-off-by: Alexander Dahl
---
Notes:
This was still in an old local branch of my working copy,
On Mon, 22 Jan 2024 at 05:31, Tom Rini wrote:
>
> On Sun, Jan 21, 2024 at 10:41:51PM +, Caleb Connolly wrote:
> >
> >
> > On 21/01/2024 15:33, Marek Vasut wrote:
> [snip]
> > > Assume that there is some large breaking change in Linux 6.(n+1),
> > > something which would be problematic for spec
Add the information for the save_uenv command and refactor the
documentation to remove the eMMC information that was wrong.
Signed-off-by: Manorit Chawdhry
---
doc/board/ti/k3.rst | 24 ++--
1 file changed, 14 insertions(+), 10 deletions(-)
diff --git a/doc/board/ti/k3.rst b
This is to make easier development with uEnv.txt to update from the
board on the fly from u-boot to MMC boot media.
Signed-off-by: Manorit Chawdhry
---
include/env/ti/mmc.env | 3 +++
1 file changed, 3 insertions(+)
diff --git a/include/env/ti/mmc.env b/include/env/ti/mmc.env
index 0256a2d2aaca
Adding this command for easier development to update uEnv.txt from
u-boot on the u-boot prompt and track the variables being updated in
uEnv.txt as well.
Signed-off-by: Manorit Chawdhry
---
Manorit Chawdhry (2):
env: ti: mmc: add save_uenv command
doc: k3: update documentation for uEn
On 1/23/24 18:58, Tom Rini wrote:
On Tue, Jan 23, 2024 at 08:53:21AM +0100, Michal Simek wrote:
On 1/22/24 23:39, Tom Rini wrote:
Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
lack of board.h file, unset this on the xilinx_mbv platforms and remove
the otherwise e
Hi Nishanth,
Apologies for the delayed response as I was on a long weekend vacation.
On Fri, 19 Jan 2024 at 21:27, Nishanth Menon wrote:
>
> On 16:05-20240110, Sumit Garg wrote:
> [...]
> > Prerequisite
> >
> >
> > This patch series requires devicetree-rebasing git repo to be added
hi Ilias,
On Tue, 23 Jan 2024 at 21:53, Ilias Apalodimas
wrote:
>
> Hi Sughosh,
>
> On Tue, Nov 21, 2023 at 12:30:26PM +0530, Sughosh Ganu wrote:
> > The UEFI capsule can now be generate by specifying the capsule
> > parameters through a config file. Additionally, the capsules can be
> > generate
It adds the ATCWDT200 support for Andes AE350 platform.
It also enables wdt command support.
Signed-off-by: CL Wang
Signed-off-by: Randolph
Reviewed-by: Leo Yu-Chi Liang
---
configs/ae350_rv32_defconfig | 4
configs/ae350_rv32_spl_defconfig | 4
configs/ae350_rv32_spl_xip
This patch adds an implementation of the Andes watchdog ATCWDT200 driver.
Signed-off-by: CL Wang
Signed-off-by: Randolph
Reviewed-by: Leo Yu-Chi Liang
---
drivers/watchdog/Kconfig | 6 +
drivers/watchdog/Makefile| 1 +
drivers/watchdog/atcwdt200_wdt.c | 220
On 12/12/23 18:04, Alexander Dahl wrote:
> Hei hei,
>
> for some downstream boards with SAMA5D27 SiP SoCs with raw NAND flash I
> added the necessary nodes to sama5d2.dtsi with just one little
> guesswork: the clocks. Motivation was to fix reading from raw nand
> flash which failed on some of tho
On 12/19/23 18:39, Alexander Dahl wrote:
> Hello Eugen,
>
> Am Tue, Dec 19, 2023 at 04:32:07PM +0200 schrieb Eugen Hristev:
>> On 12/12/23 18:04, Alexander Dahl wrote:
>>> These removed definitions were specific to some sam9 SoCs, but not
>>> generic over all at91 SoCs. The correct SoC specific d
OPTEE gets loaded into a memory region overlapping with the ram disk.
Fix the ramdisk address so it doesn't overlap with the OPTEE memory
region.
Signed-off-by: Tim Lunn
---
(no changes since v1)
include/configs/rv1126_common.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --gi
rv1126 requires OPTEE as it provides pcsi support. Mainline Linux
kernel will fail to boot without this.
Select SPL_OPTEE_IMAGE when building FIT image. TEE must be provided
when building.
Signed-off-by: Tim Lunn
---
(no changes since v1)
arch/arm/mach-rockchip/Kconfig | 1 +
1 file changed,
Sonoff iHost is gateway device designed to provide a Smart Home Hub,
it is based on Rockchip RV1126. There is also a version with 2GB RAM
based off the RV1109 dual core SoC however this works with the same
config as the RV1126 for uboot purposes.
Features:
- Rockchip RV1126
- 4GB DDR4
- 8GB eMMC
-
RV1126 soc appears to have been missed with the conversion of
rockchip socs to standard boot.
Remove remnants of distro boot for rv1126 common and the one
existing board.
Signed-off-by: Tim Lunn
Link:
https://lore.kernel.org/all/20230407223645.v8.8.I4cf7708a1ba953b9abd81375d93af34665c7b251@chan
Add support for ddr4 on rv1126. Timing detection files are imported
from downstream Rockchip BSP u-boot. Allow selecting ddr4 ram with
define CONFIG_RAM_ROCKCHIP_DDR4.
Signed-off-by: Tim Lunn
---
(no changes since v1)
.../sdram-rv1126-ddr4-detect-1056.inc | 75 +++
.../
Sync linux dts files for rv1126 boards from linux v6.8-rc1 tag. Includes
the newly added dts for Sonoff iHost.
Signed-off-by: Tim Lunn
---
(no changes since v1)
arch/arm/dts/rv1126-edgeble-neu2-io.dts | 70
arch/arm/dts/rv1126-edgeble-neu2.dtsi | 27 +-
arch/arm/dts/rv1126-pinctrl.dts
Sonoff iHost is gateway device designed to provide a Smart Home Hub,
it is based on Rockchip RV1126. It features Wifi, BT and Zigbee radios
as required by many smart home devices.
Features:
- Rockchip RV1126
- 4GB DDR4
- 8GB eMMC
- microSD slot
- RMII Ethernet PHY
- 1x USB 2.0 Host
- 1x USB 2.0
Modify imx8m Flex SPI Configuration Block to work with imxrt.
Add more Flex SPI configuration options to Kconfig.
Signed-off-by: Jesse Taube
---
include/imximage.h | 42 +
tools/Kconfig | 21 +
tools/imx8mimage.c | 41
tools/imxim
Change reset method from generic to reset driver
Signed-off-by: Jim Liu
---
arch/arm/dts/nuvoton-common-npcm8xx.dtsi | 2 +
arch/arm/dts/nuvoton-npcm8xx-u-boot.dtsi | 71
2 files changed, 24 insertions(+), 49 deletions(-)
diff --git a/arch/arm/dts/nuvoton-common-npcm8x
Hi Fabio,
Thank you you review.
Sincerely,
Liu Wang
> On Jan 23, 2024, at 4:44 PM, Fabio Estevam wrote:
>
> [CAUTION: External Mail]
>
>> On Tue, Jan 23, 2024 at 4:20 PM Liu Wang wrote:
>>
>> Hi Fabio,
>>
>> Thank you for your help.
>>
>> Attached is the 'git status' and 'git log' in my
On Wed, Jan 24, 2024 at 09:15:07AM +0800, Kever Yang wrote:
> Hi Tom,
>
> On 2024/1/24 01:58, Tom Rini wrote:
> > On Tue, Jan 23, 2024 at 11:53:18AM +0800, Kever Yang wrote:
> >
> > > Hi Tom,
> > >
> > > rk3036 only has small size internal sram, so it can only use very
> > > simple SPL which onl
On Tue, Jan 23, 2024 at 03:48:10PM +0100, Lukas Funke wrote:
> Hi Tom,
>
> On 18.01.2024 21:22, Tom Rini wrote:
> > On Wed, Jan 10, 2024 at 10:10:33AM +0100, lukas.funke-...@weidmueller.com
> > wrote:
> >
> > > From: Lukas Funke
> > >
> > > The commit enables vsprintf() to handle the '%pbl' fo
Hi Tom,
On 2024/1/24 01:58, Tom Rini wrote:
On Tue, Jan 23, 2024 at 11:53:18AM +0800, Kever Yang wrote:
Hi Tom,
rk3036 only has small size internal sram, so it can only use very
simple SPL which only including dram init, and no SPL_FRAMEWORK
support.
In this convert, the CONFIG_SPL_STACK is l
On Tue, Jan 23, 2024 at 4:20 PM Liu Wang wrote:
>
> Hi Fabio,
>
> Thank you for your help.
>
> Attached is the 'git status' and 'git log' in my porting u-boot to my
> cse_ptjob_cb3_r102 control board by following README in u-boot and being
> blocked with the hurdle of "undefined reference to `r
On 15:49-20240122, Chintan Vankar wrote:
>
> On 12/01/24 18:00, Nishanth Menon wrote:
> > On 12:17-20240112, Siddharth Vadapalli wrote:
> > > From: Kishon Vijay Abraham I
> > >
> > > In order to support Ethernet boot on AM62x, probe AM65 CPSW NUSS driver
> > > in board_init_f().
> > Why? doesn't
On 20:28-20240123, Apurva Nandan wrote:
>
[...]
> > in j784s4-binman.dtsi:
> >
> >
> > &binman {
> > j784s4_tiboot3_hs_fs_template: template-9 {
> >
> > and then in sk.dtsi:
> sk.dtsi means sk-uboot.dtsi or sk-binman.dtsi?
On 20:21-20240123, Apurva Nandan wrote:
[...]
> > > +void k3_mem_init(void)
> > > +{
> > > + struct udevice *dev;
> > > + int ret, ctr = 1;
> > > +
> > > + if (IS_ENABLED(CONFIG_K3_J721E_DDRSS)) {
> > > + ret =
On 1/23/24 19:53, Bhumkar, Tejas Arvind wrote:
[AMD Official Use Only - General]
Hi Ilias & Heinrich,
-Original Message-
From: Heinrich Schuchardt
Sent: Tuesday, January 23, 2024 3:30 PM
To: Ilias Apalodimas ; Bhumkar, Tejas Arvind
Cc: u-boot@lists.denx.de; xypron.g...@gmx.de; tr...@
Hi Fabio,
Thank you for your help.
Attached is the 'git status' and 'git log' in my porting u-boot to my
cse_ptjob_cb3_r102 control board by following README in u-boot and being
blocked with the hurdle of "undefined reference to `reset_cpu'" in hope you
spot something familiar and shed a ligh
[AMD Official Use Only - General]
Hi Ilias & Heinrich,
> -Original Message-
> From: Heinrich Schuchardt
> Sent: Tuesday, January 23, 2024 3:30 PM
> To: Ilias Apalodimas ; Bhumkar, Tejas Arvind
>
> Cc: u-boot@lists.denx.de; xypron.g...@gmx.de; tr...@konsulko.com;
> s...@chromium.org; Sim
Hi Tom,
On 1/22/24 18:54, Tom Rini wrote:
On Mon, Jan 22, 2024 at 11:49:23AM +0100, Quentin Schulz wrote:
Hi Kever,
On 1/18/24 11:12, Kever Yang wrote:
Hi Quentin,
On 2024/1/18 01:22, Quentin Schulz wrote:
From: Quentin Schulz
BOOT_DEVICE_* is set by spl_node_to_boot_device() depending on
Hi all,
On 1/23/24 15:49, Quentin Schulz wrote:
From: Quentin Schulz
JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and
is targeting Autonomous Mobile Robots (AMR).
It features:
* LPDDR4X (up to 16GB)
* 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131)
* PCIe 3.
On Tue, Jan 23, 2024 at 11:27:57AM +, Conor Dooley wrote:
> On Mon, Jan 22, 2024 at 06:55:01PM +, Conor Dooley wrote:
> > On Mon, Jan 22, 2024 at 01:47:17PM -0500, Tom Rini wrote:
> > > On Mon, Jan 22, 2024 at 06:36:31PM +, Conor Dooley wrote:
> > > > Hey,
> > > >
> > > > On Tue, Jan 1
On Tue, Jan 23, 2024 at 08:53:21AM +0100, Michal Simek wrote:
>
>
> On 1/22/24 23:39, Tom Rini wrote:
> > Now that we support having CONFIG_SYS_CONFIG_NAME be unset to indicate a
> > lack of board.h file, unset this on the xilinx_mbv platforms and remove
> > the otherwise empty file.
> >
> > Sig
On Tue, Jan 23, 2024 at 11:53:18AM +0800, Kever Yang wrote:
> Hi Tom,
>
> rk3036 only has small size internal sram, so it can only use very
> simple SPL which only including dram init, and no SPL_FRAMEWORK
> support.
> In this convert, the CONFIG_SPL_STACK is lost for this SoC, any
> suggestions
7;:
---
base-commit: 15e7927b5a2d33666af19879577bf0c30ab088fe
change-id: 20240123-safeconfigparser-778a81ef8f47
Best regards,
--
Quentin Schulz
Shift all setup stages one step earlier to better fit the
existing uclass.
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/renesas-r61307.c | 93 +++---
drivers/video/renesas-r69328.c | 81 +++--
2 files changed, 95 insertions(+), 79 deletion
Shift all setup stages one step earlier to better fit the
existing uclass.
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/bridge/ssd2825.c | 82 +++---
1 file changed, 46 insertions(+), 36 deletions(-)
diff --git a/drivers/video/bridge/ssd2825.c b/drivers/video/br
Shift all setup stages one step earlier to better fit the
existing uclass.
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/endeavoru-panel.c | 128 +---
1 file changed, 68 insertions(+), 60 deletions(-)
diff --git a/drivers/video/endeavoru-panel.c b/drivers/video/e
From: Anton Bambura
LTL106HL02 is a color active matrix TFT (Thin Film Transistor)
liquid crystal display (LCD) that uses amorphous silicon TFT as
switching devices. This model is composed of a TFT LCD panel, a
driver circuit and a backlight unit. The resolution of a 10.6"
contains 1920 x 1080 pi
The LD070WX3 is a Color Active Matrix Liquid Crystal Display with
an integral Light Emitting Diode (LED) backlight system. The
matrix employs a-Si Thin Film Transistor as the active element. It
is a transmissive type display operating in the normally Black
mode. This TFT-LCD has 7.0 inches diagonal
The current patch set improves the logic of existing panels and
bridge used by Tegra 3 devices and brings support for additional
DSI panels used by Tegra 4 devices.
New and existing drivers are fully reusable, contain no device
specific parts, and are written according to existing datasheets.
Ant
From: Jonas Schwöbel
According to Thierry Reding's commit in the linux kernel
976cebc35bed0456a42bf96073a26f251d23b264
"drm/tegra: dsi: Make FIFO depths host parameters"
correct depth of the video FIFO is 1920 *words* no *bytes*
Tested-by: Ion Agorria # HTC One X
Tested-by: Svyatoslav Ryhel
From: Jonas Schwöbel
Shift the backlight set further to prevent visual glitches on
panel init.
Signed-off-by: Jonas Schwöbel
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dsi.c | 10 --
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/video/tegra
From: Jonas Schwöbel
Configuration for DC driver command mode is not required for
every panel. Removed.
Tested-by: Ion Agorria # HTC One X
Tested-by: Svyatoslav Ryhel # Nvidia Tegratab T114
Signed-off-by: Jonas Schwöbel
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dsi.c |
Implement reset use to discard any changes which could have been
applied to DSI before and can interfere with current configuration.
Tested-by: Ion Agorria # HTC One X
Tested-by: Svyatoslav Ryhel # Nvidia Tegratab T114
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dsi.c | 14
Existing Tegra DSI driver mostly fits T114 apart MIPI calibration
which on T114 has dedicated driver. To resolve this MIPI calibration
logic was split for pre-T114 and T114+ devices.
Tested-by: Ion Agorria # HTC One X
Tested-by: Svyatoslav Ryhel # Nvidia Tegratab T114
Signed-off-by: Svyatoslav R
Dedicated MIPI calibration driver is used on T114 and newer. Before
T114 MIPI calibration registers were part of VI and CSI.
Tested-by: Svyatoslav Ryhel # Nvidia Tegratab T114
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/Makefile | 2 +-
drivers/video/tegra20/tegra-mipi.c | 1
Based on Thierry Reding's Linux commit:
'commit 1716b1891e1de05e2c20ccafa9f58550f3539717
("drm/tegra: rgb: Parameterize V- and H-sync polarities")'
Signed-off-by: Svyatoslav Ryhel
---
arch/arm/include/asm/arch-tegra/dc.h | 5 +
drivers/video/tegra20/tegra-dc.c | 22
From: Jonas Schwöbel
Fill the framebuffer memory with zeros to avoid visual glitches.
Signed-off-by: Jonas Schwöbel
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dc.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/drivers/video/tegra20/tegra-dc.c b/drivers/video/te
From: Jonas Schwöbel
The goal of panel_set_backlight() is to enable backlight. Hence,
it should be called at the probe end.
Signed-off-by: Jonas Schwöbel
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dc.c | 8 +---
1 file changed, 1 insertion(+), 7 deletions(-)
diff --g
From: Jonas Schwöbel
Framebuffer address should not be a pointer.
Signed-off-by: Jonas Schwöbel
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/tegra20/tegra-dc.c b/drivers/video/tegra20/teg
If DISP1 is a PLLD/D2 child, it cannot go over 370MHz. The cause
of this is not quite clear. This can be overcomed by further
halving the PLLD/D2 if the target parent rate is over 800MHz.
This way DISP1 and DSI clocks will have the same frequency. The
shift divider in this case has to be calculated
Implement reset use to discard any changes which could have been
applied to DC before and can interfere with current configuration.
Tested-by: Agneli # Toshiba AC100 T20
Tested-by: Robert Eckelmann # ASUS TF101
Tested-by: Andreas Westman Dorcsak # ASUS Grouper E1565
Tested-by: Ion Agorria # HT
Add powergate use on T114 to complete resetting of DC.
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dc.c | 27 +++
1 file changed, 27 insertions(+)
diff --git a/drivers/video/tegra20/tegra-dc.c b/drivers/video/tegra20/tegra-dc.c
index 35abb6fe46..9a18e
T30+ SOC have second PLLD - PLLD2 which can be actively used by
DC and act as main DISP1/2 clock parent.
Tested-by: Agneli # Toshiba AC100 T20
Tested-by: Robert Eckelmann # ASUS TF101
Tested-by: Andreas Westman Dorcsak # ASUS Grouper E1565
Tested-by: Ion Agorria # HTC One X
Tested-by: Svyatosl
Tegra SoC has 2 independent display controllers called DC_A and
DC_B, they are handled differently by internal video devices like
DSI and HDMI controllers so it is important for last to know
which display controller is used to properly set up registers.
To achieve this, a pipe field was added to pd
Consolidate HD headers and place the result into video/tegra20
since it is used only by devices from this directory.
Tested-by: Agneli # Toshiba AC100 T20
Tested-by: Robert Eckelmann # ASUS TF101
Tested-by: Andreas Westman Dorcsak # ASUS Grouper E1565
Tested-by: Ion Agorria # HTC One X
Tested-
Diverge DC driver setup to better fit each of supported generations
of Tegra SOC.
Tested-by: Agneli # Toshiba AC100 T20
Tested-by: Robert Eckelmann # ASUS TF101
Tested-by: Andreas Westman Dorcsak # ASUS Grouper E1565
Tested-by: Ion Agorria # HTC One X
Tested-by: Svyatoslav Ryhel # Nvidia Tegr
Subtracting 1 from x and y fixes image shifting on rotated
panels.
Tested-by: Robert Eckelmann # ASUS Grouper E1565
Signed-off-by: Svyatoslav Ryhel
---
drivers/video/tegra20/tegra-dc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/tegra20/tegra-dc.c b/dri
T114 is not that different from T30 and all T30 drivers will work
on T114 as well with some adjustments.
Patches propose general improvements for existing Tegra DC and DSI
drivers as well Tegra 114 video support (experimentl).
Commits pass buildman for tegra.
---
Changes from v5:
- backlight en
On Mon, Jan 22, 2024 at 6:59 PM Andre Przywara wrote:
>
> On Mon, 22 Jan 2024 11:49:59 -0500
> Tom Rini wrote:
>
> Hi Tom,
>
> > On Mon, Jan 22, 2024 at 11:45:15AM +, Andre Przywara wrote:
> > > On Wed, 10 Jan 2024 16:05:36 +0530
> > > Sumit Garg wrote:
> > >
> > > Hi,
> > >
> > > I certainl
On 1/23/24 17:18, Heinrich Schuchardt wrote:
> U-Boot does not support building kernel modules.
>
> Fixes: 3c0dbed232bd ("mmc: arm_pl180_mmci: adapt driver to DM usage")
> Fixes: 36645f45a048 ("drivers: mmc: Add sdhci driver for Broadcom iProc
> platform")
> Fixes: dadd43c14368 ("mmc: synquace
Hi Sughosh,
On Tue, Nov 21, 2023 at 12:30:26PM +0530, Sughosh Ganu wrote:
> The UEFI capsule can now be generate by specifying the capsule
> parameters through a config file. Additionally, the capsules can be
> generated as part of u-boot build, through binman. Highlight these
> changes in the doc
U-Boot does not support building kernel modules.
Fixes: 3c0dbed232bd ("mmc: arm_pl180_mmci: adapt driver to DM usage")
Fixes: 36645f45a048 ("drivers: mmc: Add sdhci driver for Broadcom iProc
platform")
Fixes: dadd43c14368 ("mmc: synquacer: Add SynQuacer F_SDH30 SDHCI driver")
Fixes: b312c590bcd8
On 1/23/24 8:39 AM, Apurva Nandan wrote:
Hi Andrew,
On 20/01/24 00:43, Andrew Davis wrote:
On 1/19/24 11:50 AM, Apurva Nandan wrote:
From: Dasnavis Sabiya
Add config fragments for am69_sk A72 and R5 configuration.
This applies on to:
j784s4_evm_a72_defconfig -> am69_sk_a72.config
j784s4_evm
On 20/01/24 00:47, Nishanth Menon wrote:
On 23:20-20240119, Apurva Nandan wrote:
[...]
diff --git a/arch/arm/dts/k3-j784s4-binman.dtsi
b/arch/arm/dts/k3-j784s4-binman.dtsi
new file mode 100644
index 00..d0d49b5bbe
--- /dev/null
+++ b/arch/arm/dts/k3-j784s4-binman.dtsi
@@ -0,0 +1,345
On 22/01/24 18:17, Roger Quadros wrote:
On 19/01/2024 19:50, Apurva Nandan wrote:
Add support for DMA in J784S4 SoC.
Signed-off-by: Jayesh Choudhary
Signed-off-by: Hari Nagalla
Signed-off-by: Apurva Nandan
Reviewed-by: Nishanth Menon
---
drivers/dma/ti/Makefile | 1 +
On 20/01/24 01:04, Nishanth Menon wrote:
On 23:20-20240119, Apurva Nandan wrote:
[...]
+void k3_spl_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ /*
+* Cannot delay this further as there is a chance that
+* K3_BOOT_PARAM_TABLE_INDEX can be over written
From: Quentin Schulz
JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and
is targeting Autonomous Mobile Robots (AMR).
It features:
* LPDDR4X (up to 16GB)
* 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131)
* PCIe 3.0 4-lane on M.2 M-key connector
* PCIe 2.1 1-lane on
From: Quentin Schulz
It's one thing to have the register mapped via a well-defined struct but
it's another to be able to make use of it. For that to happen, one needs
to cast the physical address memory of the beginning of the register
address space with the struct. Since this cannot change, let'
From: Quentin Schulz
The different macros use writel which is defined in asm/io.h, so let's
include the header so users of hardware.h do not need to include
asm/io.h as well.
While at it, remove asm/io.h includes wherever
asm/arch-rockchip/hardware.h is included already.
Cc: Quentin Schulz
Sig
From: Quentin Schulz
Since commit 9e644284ab81 ("dm: core: Report bootph-pre-ram/sram node as
pre-reloc after relocation"), bootph-pre-ram doesn't make U-Boot proper
bind the device before relocation.
While this is usually not much of an issue, it is when there's a lookup
for devices by code run
From: Quentin Schulz
Nothing of the hardware.h is used in include/configs, therefore, let's
move that include to the files that actually require this include.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
arch/arm/mach-rockchip/rk3066/rk3066.c | 1 +
drivers/ram/rockchip/dmc-rk3368.c
From: Quentin Schulz
Rockchip SoCs have some jtag/sdmmc autoswitching that simply doesn't
work really well.[00] The Linux kernel disables it for all SoCs[01], so
U-Boot needs to do the same in order to fix issues related to SD card on
RK3588. This autoswitching is enabled (by default) via the for
From: Quentin Schulz
There's only one user of rockchip_capsule_update_board_setup, which is
in board.c, and only one board defines it, so instead of having a header
only for one function symbol, let's just use a weak symbol instead.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
arch/ar
From: Quentin Schulz
Only setup_iodomain() and setup_boottargets differ from the original
misc_init_r from Rockchip mach code, so let's use
rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_r from Rockchip.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
board/theo
From: Quentin Schulz
The functions aren't used anywhere else than in board.c, therefore,
let's not expose them anymore at all.
This merges misc.c and board.c together and removes the functions from
the misc.h header file.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
arch/arm/include/
From: Quentin Schulz
Only setup_boottargets differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
.../theobroma-systems/ringneck
From: Quentin Schulz
Only setup_iodomain() differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
board/pine64/rockpro64_rk3399/r
From: Quentin Schulz
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_
From: Quentin Schulz
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_
From: Quentin Schulz
Only setup_iodomain() differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
---
board/google/gru/gru.c | 20 ++-
From: Quentin Schulz
Most Rockchip boards who override misc_init_r do it only to call another
function and keep the rest unchanged. Therefore to allow for less
duplication, let's just add a weak function symbol that is called inside
misc_init_r.
Cc: Quentin Schulz
Signed-off-by: Quentin Schulz
From: Quentin Schulz
The expected length of the cpuid, as passed with cpuid_length,
determines the size of cpuid_str string. Therefore, care should be taken
to make sure nothing is accessing data out-of-bounds.
Instead of using hardcoded values, derive them from cpuid_length.
Cc: Quentin Schulz
From: Heiko Stuebner
This brings the real host2_xhci node as well as the pmu1grf node and
spi0 to spi4 aliases from the next-20240110 Linux kernel. So also
adapt/remove the nodes and aliases in rk3588s-u-boot.dtsi
Signed-off-by: Heiko Stuebner
[sync with v6.8-rc1]
[remove spi0 to spi4 aliases f
From: Heiko Stuebner
The compatible for the pmugrf in the mainline kernel is dfferent from the
one currently used in u-boot. Adapt the -u-boot.dtsi and syscon driver
to use the correct compatible.
Signed-off-by: Heiko Stuebner
Signed-off-by: Quentin Schulz
---
arch/arm/dts/rk3588s-u-boot.dtsi
etions(-)
---
base-commit: 15e7927b5a2d33666af19879577bf0c30ab088fe
change-id: 20240123-jaguar-efd00e57f56c
Best regards,
--
Quentin Schulz
Hi Tom,
On 18.01.2024 21:22, Tom Rini wrote:
On Wed, Jan 10, 2024 at 10:10:33AM +0100, lukas.funke-...@weidmueller.com wrote:
From: Lukas Funke
The commit enables vsprintf() to handle the '%pbl' format specifier
in order to print bitmaps and its derivatives such as cpumask and
nodemask [1].
On 20/01/24 00:55, Nishanth Menon wrote:
On 23:20-20240119, Apurva Nandan wrote:
[...]
diff --git a/arch/arm/dts/k3-am69-sk.dts b/arch/arm/dts/k3-am69-sk.dts
index 9868c7049b..29884097b9 100644
--- a/arch/arm/dts/k3-am69-sk.dts
+++ b/arch/arm/dts/k3-am69-sk.dts
I think you mis-interpreted
ht
Hi Nishanth
On 20/01/24 01:09, Nishanth Menon wrote:
On 23:20-20240119, Apurva Nandan wrote:
Add board files for J784S4 EVM.
SYS_DISABLE_DCACHE_OPS is selected in the Kconfig because
J784S4/AM69 are a coherent architecture at A72 level by
MSMC support.
Signed-off-by: Hari Nagalla
[ add env a
On 22/01/24 18:28, Roger Quadros wrote:
On 19/01/2024 19:50, Apurva Nandan wrote:
From: Dasnavis Sabiya
Introduce the base dts files needed for u-boot or to augment the linux
dtbs for use in the u-boot-spl and u-boot binaries.
Signed-off-by: Dasnavis Sabiya
Signed-off-by: Apurva Nandan
-
Hi Andrew,
On 20/01/24 00:43, Andrew Davis wrote:
On 1/19/24 11:50 AM, Apurva Nandan wrote:
From: Dasnavis Sabiya
Add config fragments for am69_sk A72 and R5 configuration.
This applies on to:
j784s4_evm_a72_defconfig -> am69_sk_a72.config
j784s4_evm_r5_defconfig -> am69_sk_r5.config
The us
Hi!
I am integrating tbot with uboot test/py framework, and some tests hangs the
testing, after I investigated what does this hanging, I found that if the
fixture of the test
occur and configured in menuconfig it won't pass.
I am not sure what I am doing wrong here.
can someone guide me please
Hi,
as requested [1]:
Tested-by: Jens Maus mailto:m...@jens-maus.de>>
best regards,
jens
[1] https://lists.denx.de/pipermail/u-boot/2024-January/544243.html
> Am 23.01.2024 um 09:07 schrieb Ivan T. Ivanov :
>
> This is new round of patches posted earlier here[1]. They are adding basic
> suppo
1 - 100 of 120 matches
Mail list logo
