On Tue, 31 Oct 2023 at 19:52, Caleb Connolly wrote:
>
> Move the Qualcomm pinctrl drivers out of mach-snapdragon and over to the
> rest of the pinctrl drivers, adjust the drivers so that support for each
> platform can be enabled/disabled individually and introduce platform
> specific configuratio
Hi,
> -Original Message-
> From: U-Boot On Behalf Of Jaehoon Chung
> Sent: Friday, November 3, 2023 10:07 AM
> To: 'Mattijs Korpershoek'
> Cc: lu...@denx.de; u-boot@lists.denx.de
> Subject: RE: [PATCH] dfu: add CONFIG_DFU_NAME_MAX_SIZE configuration
>
> Hi Mathtjjs,
>
> > -Original
Due to the sequence of merges, it looks like many of k3 documentation
used code-blocks while the rest of the docs migrated to ::prompt.
Sync all to a common style.
based off:
master 07fe79c93c5c Merge tag 'i2cfixes-for-v2024-01-rc2' of
https://source.denx.de/u-boot/custodians/u-boot-i2c
Changes
Use prompt instead of code-block to have copy-paste friendly command
documentation.
Signed-off-by: Nishanth Menon
---
Changes since v1:
minor fixup for whitespace indentation.
V1: https://lore.kernel.org/r/20231103000915.2413501-4...@ti.com
doc/board/ti/am62x_beagleplay.rst | 46 ++---
The sphinx-prompt documentation[0] provides examples on how we can use
prompt as a parameter to simplify the description. Use the same.
While at it, ensure to make all relevant prompts clarified such as gdb
prompts.
[0] http://sbrunner.github.io/sphinx-prompt/
Signed-off-by: Nishanth Menon
---
Hi Simon:
I found that the EFI complained that the disk install path is not updated for
the second disk.
The install path is “EFI: installed device path
'/VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/Scsi(0,0)'”
when first disk is added.
But the path is same when the second or later disks are add
On 19:09-20231102, Nishanth Menon wrote:
> Due to the sequence of merges, it looks like many of k3 documentation
> used code-blocks while the rest of the docs migrated to ::prompt.
>
> Sync all to a common style.
>
> based off:
> master 07fe79c93c5c Merge tag 'i2c
Hi Mathtjjs,
> -Original Message-
> From: Mattijs Korpershoek
> Sent: Thursday, November 2, 2023 6:15 PM
> To: Jaehoon Chung
> Cc: lu...@denx.de; u-boot@lists.denx.de
> Subject: Re: [PATCH] dfu: add CONFIG_DFU_NAME_MAX_SIZE configuration
>
> Hi Jaehoon,
>
> On mar., oct. 31, 2023 at 15
From: Robert Nelson
BeagleBoard.org BeagleBone AI-64 is an open source hardware single
board computer based on the Texas Instruments TDA4VM SoC featuring
dual-core 2.0GHz Arm Cortex-A72 processor, C7x+MMA and 2 C66x
floating-point VLIW DSPs, 3x dual ARM Cortex-R5 co-processors,
2x 6-core Programm
From: Benjamin Szőke
Technexion PICO-IMX7 SoM is supporting USDHC3 (eMMC or micro SD on SoM)
and USDHC1 (SD on carrier board) to use on any carrier board like
PICO-NYMPH. Based on the U-Boot version from Technexion it adds
baseboard SD card boot detect to able to boot from selected USDHC1
or USDH
Drop headers that are no longer necessary for build
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 8
1 file changed, 8 deletions(-)
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index 75d51a0552c4..8f0996c32ee6 100644
--- a/board/ti/j721e/evm.c
+++ b/board/ti/j721
Allow the reuse of k3-j721e-binman for other platforms such as
BeagleBone-AI64. Provide a couple of macros to indicate the correct
dtb to be able to re-use soc binman dtsi file
Signed-off-by: Nishanth Menon
---
arch/arm/dts/k3-j721e-binman.dtsi | 12
1 file changed, 12 insertions(+)
Switch to using IS_ENABLED() for inline function usage.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 83 ++--
1 file changed, 42 insertions(+), 41 deletions(-)
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index 8f0996c32ee6..17640a
Allow the reuse of k3-j721e-binman for other platforms such as
BeagleBone-AI64. We don't need to build SK device tree blobs in-order
to be able to build dtbs for single configuration platforms.
Signed-off-by: Nishanth Menon
---
arch/arm/dts/k3-j721e-binman.dtsi | 21 +
Move code out of evm.c that is based on evm specific checks for board
variants and initialization sequences there of.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/Makefile| 1 +
board/ti/j721e/{evm.c => board-variants.c} | 172 +
board/ti/j721e/evm.c
When config is enabled, the esm dt probe makes sense. Simplify by
dropping board specific checks.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 10 ++
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index d4f7c1d9f938..
Commit 5019170970ad ("arch: arm: mach-k3: j721e: add support for UDA
FS") introduced basic UDA FS support, however, we can Take approach
similar to commit 0f1c1e8b368b ("arm: mach-k3: am625: Add support for
UDA FS"). While boot partition support with EMMC boot is useful, it is
constrained by the si
Add base documentation for BeagleBone AI-64.
Signed-off-by: Nishanth Menon
---
doc/board/ti/j721e_beagleboneai64.rst | 327 ++
doc/board/ti/k3.rst | 1 +
2 files changed, 328 insertions(+)
create mode 100644 doc/board/ti/j721e_beagleboneai64.rst
diff
Kernel commit 1b77265626a4 ("arm64: dts: ti: k3-j7200-mcu-wakeup: Add
HyperBus node") was merged to kernel without its dependent patch [1].
Similar fix is needed in U-Boot, and hbmc currently breaks boot. Till
this gets fixed in U-Boot, disable the config by default so that the
hbmc probe that happ
Cleanups for J721e/J7200 and add support for BeagleBone AI-64
Based off:
master 07fe79c93c5c Merge tag 'i2cfixes-for-v2024-01-rc2' of
https://source.denx.de/u-boot/custodians/u-boot-i2c
Boot Logs:
J721e-SK: https://gist.github.com/nmenon/c144e64f1da9fd49997ef5794b056bb0
J721e-EVM: https://gist.g
Serdes initialization should be compile flag based instead of being
eeprom based.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 10 ++
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index 17640ae79665..d49993fffe39 100
Add defconfig fragments for J721E based BeagleBone AI-64 and
corresponding customized environment.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/beagleboneai64.env| 19
board/ti/j721e/beagleboneai64_a72.config | 55
board/ti/j721e/beagleboneai64_r5.co
Add explicit boot_targets to indicate the specific boot sequence to
follow.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/j721e.env | 1 +
1 file changed, 1 insertion(+)
diff --git a/board/ti/j721e/j721e.env b/board/ti/j721e/j721e.env
index 8cc8232fc131..cb27bf5e2b24 100644
--- a/board/ti/j7
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmd and instead depend entirely on bootflow method of
starting the system up.
Signed-off-by: Nishanth Menon
---
configs/j721e_evm_a72_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/c
Use IS_ENABLED to replace the #ifdeffery.
Signed-off-by: Nishanth Menon
---
board/ti/j721e/evm.c | 25 +++--
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index d49993fffe39..0fc141776818 100644
--- a/board/ti/j721
Hi Simon,
Simon Glass writes:
> On Thu, 12 Oct 2023 at 20:06, Maxim Cournoyer
> wrote:
>>
>> A Change-Id can be useful for traceability purposes, and some projects
>> may wish to have them preserved. This change makes it configurable
>> via a new 'keep_change_id' setting.
>>
>> Signed-off-by:
On Thu, Nov 02, 2023 at 11:02:51PM +0100, Marek Vasut wrote:
> The following changes since commit a803f87202aa48974bdff4d8100464a8288931e4:
>
> Merge https://source.denx.de/u-boot/custodians/u-boot-mmc (2023-11-01
> 09:44:33 -0400)
>
> are available in the Git repository at:
>
> https://so
Provide more friendlier documentation with prompt (gdb) option
Signed-off-by: Nishanth Menon
---
doc/board/ti/k3.rst | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/doc/board/ti/k3.rst b/doc/board/ti/k3.rst
index e9bbe7c09794..c20e33d00412 100644
--- a/doc/board/ti
Due to the sequence of merges, it looks like many of k3 documentation
used code-blocks while the rest of the docs migrated to ::prompt.
Sync all to a common style.
based off:
master 07fe79c93c5c Merge tag 'i2cfixes-for-v2024-01-rc2' of
https://source.denx.de/u-boot/custodians/u-boot-i2c
Nishant
The sphinx-prompt documentation[0] provides examples on how we can use
prompt as a parameter to simplify the description. Use the same.
[0] http://sbrunner.github.io/sphinx-prompt/
Signed-off-by: Nishanth Menon
---
doc/board/ti/am335x_evm.rst | 39 +
doc/boar
Use prompt instead of code-block to have copy-paste friendly command
documentation.
Signed-off-by: Nishanth Menon
---
doc/board/ti/am62x_beagleplay.rst | 46 -
doc/board/ti/am62x_sk.rst | 18 +++
doc/board/ti/am64x_evm.rst| 20 +++
doc/board/ti/am65x_evm.r
Hi
On 10/3/23 16:22, Kuan Lim Lee wrote:
> From: Kuan Lim Lee
>
> Cadence SDMMC v6 controller has a lot of changes on initialize
> compared to v4 controller. PHY is needed by v6 controller.
>
> Signed-off-by: Kuan Lim Lee
> Reviewed-by: Alex Soo
> Reviewed-by: Wei Liang Lim
I didn't see the
Hi Tom,
Just various bugfixes, apart from the TI one
https://source.denx.de/u-boot/custodians/u-boot-dm/-/commit/3227baad05481e37d75aeae7c7c1467fd6903f7d
https://dev.azure.com/simon0972/u-boot/_build/results?buildId=54&view=results
(not finished yet)
The following changes since commit 07fe79c
On Thu, 12 Oct 2023 at 20:06, Maxim Cournoyer wrote:
>
> A Change-Id can be useful for traceability purposes, and some projects
> may wish to have them preserved. This change makes it configurable
> via a new 'keep_change_id' setting.
>
> Signed-off-by: Maxim Cournoyer
> ---
>
> Changes in v2:
>
Hi Simon
On 15/10/23 02:10, Simon Glass wrote:
> For tests which fake bintools being missing, we need to reset the list
> afterwards, to ensure that future tests do not also see the bintools as
> missing.
>
> Reset the list when processing is complete.
>
> Signed-off-by: Simon Glass
> ---
>
> t
Hi Simon
On 15/10/23 02:10, Simon Glass wrote:
> cbfsutil changed to skip adding a compression attribute if there is no
> compression. Adjust the binman implementation to do the same.
>
> This mirrors commit 105cdf5625 in coreboot.
>
> Signed-off-by: Simon Glass
> ---
>
> tools/binman/cbfs_util
cbfsutil changed to write zero bytes instead of 0xff when a small
padding must be added. Adjust the binman implementation to do the same.
Drop the code which looks for an unused attribute tag, since it is not
used. A future patch moves the attributes to the end of the header in
any case, so no dat
cbfsutil changed to 4-byte alignment for filenames instead of 16.
Adjust the binman implementation to do the same.
This mirrors commit 5779ca718c in coreboot.
Signed-off-by: Simon Glass
---
tools/binman/cbfs_util.py | 10 +-
tools/binman/cbfs_util_test.py | 19 ++-
In preparation for changing how stages are stored, rename the existing
stage tag.
Signed-off-by: Simon Glass
---
cmd/cbfs.c | 2 +-
include/cbfs.h | 2 +-
tools/binman/cbfs_util.py | 12 ++--
tools/binman/cbfs_util_test.py | 3 ++-
4 files cha
cbfsutil completely changed the way that stages are formatted in CBFS.
Adjust the binman implementation to do the same.
This mirrors commit 81dc20e744 in coreboot.
Signed-off-by: Simon Glass
---
tools/binman/cbfs_util.py | 64 +-
tools/binman/cbfs_util_test
on Peach-pi console every key press is echoed with message
'cros_ec_command: Returned status 1'
this is not proper fix, just hack to disable this message
Signed-off-by: Milan P. Stanić
Reviewed-by: Simon Glass
---
changed patch to use log_debug and added forgoten Signed-off-by and
and Reviewed-
On Mon, Oct 23, 2023 at 12:52:43AM -0700, Simon Glass wrote:
> When symbols switch between the inited data section and the read-only
> data section their visbility changes, at present, with the -B option.
>
> This is confusing, since adding 'const' to a variable declaration can
> make it look like
On Mon, 23 Oct 2023 at 01:01, Neha Malcom Francis wrote:
>
> According to the TRMs of K3 platform of devices, the ROM boot image
> format specifies a "Core Options Field" that provides the capability to
> set the boot core in lockstep when set to 0 or to split mode when set
> to 2. Add support for
On Tue, Oct 24, 2023 at 08:30:47AM +0200, Heinrich Schuchardt wrote:
> The sandbox should closely mimic other architectures.
>
> Place each function or data in a separate section and let the linker
> eliminate unused ones. This will reduce the binary size.
>
> In the linker script mark that u_boot
It isn't clear why we need to have two different paths for closing down
the pipe. Unify them and use the Python to avoid this warning:
subprocess.py:1127: ResourceWarning: subprocess 83531 is still running
Note that this code appears to originally have come from [1] and was
committed into the C
Hi Devarsh,
On Tue, 31 Oct 2023 at 13:12, Devarsh Thakkar wrote:
>
> Start reservations needed for init sequence only after catching
> bloblists from previous stage.
>
> This is to avoid catching bloblists in the middle causing
> gaps while u-boot is reserving.
>
> Adjust the relocaddr as per vid
Hi Devarsh,
On Tue, 31 Oct 2023 at 13:12, Devarsh Thakkar wrote:
>
> Fill video handoff fields in video_post_probe
> as at this point we have full framebuffer related
framebuffer-related
> information.
>
> Also fill all the fields available in video hand-off
> struct as those were missing earli
On Tue, 31 Oct 2023 at 13:12, Devarsh Thakkar wrote:
>
> Skip framebufer reservation if it was already reserved
> from previous stage and whose information was passed
> using a bloblist.
>
> Signed-off-by: Devarsh Thakkar
> Reviewed-by: Simon Glass
> ---
> V2:
> - Add debug prints
> - Fix commen
Hi Alexey,
On Thu, 2 Nov 2023 at 12:57, Alexey Romanov wrote:
>
> Add dm_rng_read_default() function, which obtain a series
> of random bytes. In some cases, such function would be
> useful because it allows the caller to abstract away from
> RNG device.
It should not do that. It should create a
On Tue, 31 Oct 2023 at 05:18, Samuel Holland wrote:
>
> Now that 32-bit SoCs can load U-Boot proper (and possibly other
> firmware) from a FIT, use this method by default. SPL_FIT_IMAGE_TINY is
> required to stay within the 24 or 32 KiB SPL size limit on early SoCs;
> for consistency, enable it ev
On Tue, 31 Oct 2023 at 05:18, Samuel Holland wrote:
>
> Some 32-bit SoCs can use SCP firmware to implement additional PSCI
> functionality, such as system suspend. In order to load this firmware
> from SPL, we need to generate and use a FIT instead of a legacy image.
>
> Adjust the binman FIT defi
Hi Devarsh,
On Tue, 31 Oct 2023 at 13:12, Devarsh Thakkar wrote:
>
> Add function spl_reserve_video which is a wrapper
> around video_reserve to setup video memory and update
> the relocation address pointer.
>
> Setup video memory before page table reservation so that
> framebuffer memory gets r
Hi Alexey,
On Thu, 2 Nov 2023 at 12:58, Alexey Romanov wrote:
>
> The correct declaration place for platform_get_rng_device()
> function is here. Also, this function is re-implemented to provide
> the first successfully probed RNG device.
>
> Signed-off-by: Alexey Romanov
> ---
> drivers/rng/rn
On Tue, Sep 12, 2023 at 02:35:03PM -0700, seanedm...@linux.microsoft.com wrote:
> From: Sean Edmond
>
> There is a preference to use the "ofnode" API for FDT fixups
> moving forward. The FDT fixup will usually be for the kernel FDT. To
> fixup the kernel FDT with the ofnode API, it's required
The following changes since commit a803f87202aa48974bdff4d8100464a8288931e4:
Merge https://source.denx.de/u-boot/custodians/u-boot-mmc (2023-11-01
09:44:33 -0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-sh.git master_common_h_cleanup
for you
On 11/2/23 11:16, Alexey Romanov wrote:
The correct declaration place for platform_get_rng_device()
function is here. Also, this function is re-implemented to provide
the first successfully probed RNG device.
Signed-off-by: Alexey Romanov
---
drivers/rng/rng-uclass.c | 16
i
During bootstd scanning for bootdevs, if bootdev_hunt_drv() encounters
a device not found error (e.g. ENOENT), let it return a successful status
so that bootstd will continue scanning the next devices, not stopping
prematurely.
Background:
During scanning for bootflows, it's possible for bootstd
On 12:05-20231101, Andrew Davis wrote:
> Add am62x_beagleplay_r5_defconfig for R5 SPL and
> am62x_beagleplay_a53_defconfig for A53 SPL and U-Boot support.
>
> These defconfigs are composite defconfigs built from the config fragment
> board/ti/am62x/beagleplay_*.config applied onto the base
> am62x
On 12:05-20231101, Andrew Davis wrote:
> This allows us to use some of the normal preprocessor directives inside
> defconfig files. Such as #define and #include.
>
> Signed-off-by: Andrew Davis
> Reviewed-by: Simon Glass
Reviewed-by: Nishanth Menon
--
Regards,
Nishanth Menon
Key (0xDDB5849D
On 11/2/23 3:55 AM, Francesco Dolcini wrote:
Hello Andrew,
On Wed, Nov 01, 2023 at 03:35:28PM -0500, Andrew Davis wrote:
Currently each set of board targets from a vendor is selected inside
the board directory for that vendor. This has the problem of multiple
targets, one from each vendor, bein
On Wed, Oct 25, 2023 at 07:17:37AM +1300, Simon Glass wrote:
> This has a typo which makes the method inoperable. Correct it so that
> 'bootflow read' works correctly for ChromeOS.
>
> Signed-off-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signatu
Hello Andrew,
thanks for the patch.
On Wed, Nov 01, 2023 at 01:33:29PM -0500, Andrew Davis wrote:
> This file is common for all K3, move it out of board/ directory and
> into mach-k3. As we need to change the path in k3-binman.dtsi let's
> take this opportunity to switch to absolute paths which ma
On Mon, Aug 28, 2023 at 08:49:59PM +0200, Heinrich Schuchardt wrote:
> Compiling sandbox_defconfig with CONFIG_BOOTSTD=n fails:
>
> /usr/bin/ld: drivers/mtd/spi/sf_bootdev.o:
> in function `sf_get_bootflow':
> /drivers/mtd/spi/sf_bootdev.c:43:(.text+0x96):
> undefined reference to
On Sun, Sep 03, 2023 at 10:40:00PM +0200, Mark Kettenis wrote:
> Enable the bootflow based on this bootmeth if the BootOrder EFI
> variable is set.
>
> Signed-off-by: Mark Kettenis
> Reviewed-by: Simon Glass
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Thu, Nov 02, 2023 at 03:10:44PM +0100, Heiko Schocher wrote:
> Hello Tom,
>
> please pull from u-boot-i2c:
>
> The following changes since commit d9650a48234058c645d1a07951c3d2cf129427e6:
>
> Merge branch '2023-10-28-assorted-platform-updates' (2023-10-28 09:23:27
> -0400)
>
> are availa
On Wed, Oct 25, 2023 at 07:17:36AM +1300, Simon Glass wrote:
> Two bugs have appeared:
>
> - arguments can have an equals sign embedded in them, which must be
> considered part of the value
> - arguments must fully match the name; partial matches should be
> ignored
>
> Fix these and add a t
On Thu, Nov 02, 2023 at 06:49:56PM +0800, Leo Liang wrote:
> Hi Tom,
>
> The following changes since commit a803f87202aa48974bdff4d8100464a8288931e4:
>
> Merge https://source.denx.de/u-boot/custodians/u-boot-mmc (2023-11-01
> 09:44:33 -0400)
>
> are available in the Git repository at:
>
>
On Wed, Nov 01, 2023 at 05:03:29PM -0400, Sean Anderson wrote:
> The following changes since commit fb428b61819444b9337075f49c72f326f5d12085:
>
> Merge branch '2023-10-24-assorted-general-fixes-and-updates' (2023-10-24
> 19:12:21 -0400)
>
> are available in the Git repository at:
>
> https
On Thu, Nov 2, 2023 at 3:13 PM Sean Anderson wrote:
>
> On 11/2/23 10:08, Dario Binacchi wrote:
> > On Thu, Nov 2, 2023 at 3:06 PM Sean Anderson wrote:
> >>
> >> On 11/2/23 10:01, Dario Binacchi wrote:
> >>> Sean, All,
> >>>
> >>> On Sun, Oct 29, 2023 at 4:48 AM Sean Anderson wrote:
>
> >>>
Sean, All
On Thu, Nov 2, 2023 at 3:17 PM Sean Anderson wrote:
>
> On 11/2/23 05:53, Dario Binacchi wrote:
> > Sean, All
> >
> > On Sun, Oct 29, 2023 at 4:48 AM Sean Anderson wrote:
> >>
> >> Contrary to what the help message says, this is the number of pages per
> >> block. Calculate it automati
On 11/2/23 05:53, Dario Binacchi wrote:
Sean, All
On Sun, Oct 29, 2023 at 4:48 AM Sean Anderson wrote:
Contrary to what the help message says, this is the number of pages per
block. Calculate it automatically based on SYS_NAND_BLOCK_SIZE and
SYS_NAND_PAGE_SIZE.
Signed-off-by: Sean Anderson
Hello Heinrich,
On 13.10.23 15:09, Heinrich Schuchardt wrote:
> In SPL probing of the designware_i2c device on the StarFive VisionFive 2
> board fails with
>
> dw_i2c: mode 0, ic_clk 100, speed 10,
> period 10 rise 1 fall 1 tlow 5 thigh 4 spk 0
> dw_i2c: bad counts. hcnt = -4
On Thu, Nov 2, 2023 at 3:06 PM Sean Anderson wrote:
>
> On 11/2/23 10:01, Dario Binacchi wrote:
> > Sean, All,
> >
> > On Sun, Oct 29, 2023 at 4:48 AM Sean Anderson wrote:
> >>
> >> This series tests raw nand flash in sandbox and fixes various bugs
> >> discovered in
> >> the process. I've tried
Hello Philip,
On 31.10.23 08:38, Philip Richard Oberfichtner wrote:
> The legacy I2C bootcounter will hereby be removed and eventually
> be replaced by a driver model implementation in the follow-up commit.
>
> The legacy driver has the following drawbacks:
> - It's not adhering to the driv
On 11/2/23 10:08, Dario Binacchi wrote:
On Thu, Nov 2, 2023 at 3:06 PM Sean Anderson wrote:
On 11/2/23 10:01, Dario Binacchi wrote:
Sean, All,
On Sun, Oct 29, 2023 at 4:48 AM Sean Anderson wrote:
This series tests raw nand flash in sandbox and fixes various bugs discovered in
the process.
Hello Tom,
please pull from u-boot-i2c:
The following changes since commit d9650a48234058c645d1a07951c3d2cf129427e6:
Merge branch '2023-10-28-assorted-platform-updates' (2023-10-28 09:23:27
-0400)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-i2c.
Hello Philip,
On 31.10.23 08:38, Philip Richard Oberfichtner wrote:
> This new function enhances the i2c_get_chip*() toolbox by implementing a
> variant that does not require a chip_addr. Instead, the desired device
> is pointed to by a phandle.
>
> Signed-off-by: Philip Richard Oberfichtner
> -
Hello Philip,
On 31.10.23 08:38, Philip Richard Oberfichtner wrote:
> This adds a generic I2C bootcounter adhering to driver model to replace
> the previously removed legacy implementation.
>
> There is no change in functionality, it can be used on any I2C device.
> The device tree configuration
On 11/2/23 10:01, Dario Binacchi wrote:
Sean, All,
On Sun, Oct 29, 2023 at 4:48 AM Sean Anderson wrote:
This series tests raw nand flash in sandbox and fixes various bugs discovered in
the process. I've tried to do things in a contemporary manner, avoiding the
(numerous) variations present on
Hello Jim Liu,
On 04.10.23 03:35, Jim Liu wrote:
> first version is only support standard mode.
> remove this judgment to support standard/fast/fast plus mode.
>
> Signed-off-by: Jim Liu
>
> Changes for v2:
>- add commit message
> ---
> drivers/i2c/npcm_i2c.c | 5 -
> 1 file changed,
Sean, All,
On Sun, Oct 29, 2023 at 4:48 AM Sean Anderson wrote:
>
> This series tests raw nand flash in sandbox and fixes various bugs discovered
> in
> the process. I've tried to do things in a contemporary manner, avoiding the
> (numerous) variations present on only a few boards. The test is p
Hi there
We recently got our first batch of i.MX 8M Plus QuadLite based SoMs. While NXP
downstream works just fine on
them they just hang booting with latest upstream U-Boot (and TF-A). Replacing
TF-A with the downstream NXP one
made upstream U-Boot work as well. Further debugging TF-A showed
i
On 11/2/23 07:15, Dario Binacchi wrote:
Sean, All
On Sun, Oct 29, 2023 at 4:49 AM Sean Anderson wrote:
Add a sandbox NAND flash driver to facilitate testing. This driver supports
any number of devices, each using a single chip-select. The OOB data is
stored in-band, with the separation enforc
nc(USB_DFU, usbdfu, na) \
func(MMC, mmc, 0) \
BOOT_TARGET_DEVICES_USB(func) \
func(PXE, pxe, na) \
---
base-commit: a803f87202aa48974bdff4d8100464a8288931e4
change-id: 20231102-libretech-ac-fix-dfu-dbd8109d552d
Best regards,
--
Neil Armstrong
On 01/11/2023 15:04, Alexey Romanov wrote:
From: Dmitry Rokosov
One well-known sm child device that provides secure power control is the
Secure Power Controller. This device utilizes SMC calls to communicate
with power domains on the secure monitor side.
Signed-off-by: Dmitry Rokosov
Signed-o
On 01/11/2023 15:04, Alexey Romanov wrote:
Since we sync device tree with Linux, we have to add this
clock definition for USB stack.
Signed-off-by: Alexey Romanov
---
drivers/clk/meson/a1.c | 6 ++
1 file changed, 6 insertions(+)
diff --git a/drivers/clk/meson/a1.c b/drivers/clk/meson/a
On Thu, Nov 02, 2023 at 06:27:37PM +0800, Yong-Xuan Wang wrote:
> Hi Tom,
>
> On Tue, Oct 31, 2023 at 7:54 PM Tom Rini wrote:
> >
> > On Tue, Oct 31, 2023 at 03:56:45PM +0800, Yong-Xuan Wang wrote:
> >
> > > Hi Tom,
> > >
> > > 0x8020 comes from the result of the relocated_addr in booti_setup
The correct declaration place for platform_get_rng_device()
function is here. Also, this function is re-implemented to provide
the first successfully probed RNG device.
Signed-off-by: Alexey Romanov
---
drivers/rng/rng-uclass.c | 16
include/efi_rng.h| 2 --
include/rng
Add dm_rng_read_default() function, which obtain a series
of random bytes. In some cases, such function would be
useful because it allows the caller to abstract away from
RNG device.
Signed-off-by: Alexey Romanov
---
drivers/rng/rng-uclass.c | 18 ++
include/rng.h| 10
Hello!
This patchset adds dm_rng_read_default() helper function,
that selects the first rng device and uses it to obtain
random bytes.
V2:
- Move platform_get_rng_device() to rng-uclass.c.
- Re-implement it to get first successfully probed device.
- Use it in dm_rng_read_default().
Alexey Rom
Hi Caleb,
On Tue, 31 Oct 2023 at 03:53, Caleb Connolly wrote:
>
> This series begins making some headway towards cleaning up Qualcomm
> platform support in u-boot. The following is a rough overview of the
> changes:
>
> * Move the Qualcomm clock drivers out of mach-snapdragon and into clk/qcom
>
Switch to using new dump operation in clock provider drivers instead of
overriding soc_clk_dump.
Signed-off-by: Igor Prusov
Tested-by: Patrice Chotard
Reviewed-by: Sean Anderson
---
arch/mips/mach-pic32/cpu.c | 23 ---
drivers/clk/aspeed/clk_ast2600.c | 13 ---
After introducing dump to clk_ops there is no need to override or expose
this symbol anymore.
Signed-off-by: Igor Prusov
Reviewed-by: Patrice Chotard
Tested-by: Patrice Chotard
Reviewed-by: Sean Anderson
---
cmd/clk.c | 4 ++--
include/clk.h | 2 --
2 files changed, 2 insertions(+), 4 del
Add another loop to dump additional info from clock providers that
implement dump operation.
Signed-off-by: Igor Prusov
Reviewed-by: Patrice Chotard
Tested-by: Patrice Chotard
---
cmd/clk.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/cmd/clk.c b/cmd/clk.c
index c7c379d7a6..4b9
This adds dump function to struct clk_ops which should replace
soc_clk_dump. It allows clock drivers to provide custom dump
implementation without overriding generic CCF dump function.
Signed-off-by: Igor Prusov
Reviewed-by: Patrice Chotard
Tested-by: Patrice Chotard
---
include/clk-uclass.h |
Move clock dump function in preparation for switching to dump function
in clk_ops.
Signed-off-by: Igor Prusov
Acked-by: Michal Simek
---
arch/arm/mach-zynq/clk.c | 57 ---
drivers/clk/clk_zynq.c | 58
2 files changed
Move driver and ops structs to avoid forward declaration after switching
to dump in clk_ops.
Signed-off-by: Igor Prusov
Reviewed-by: Neil Armstrong
---
drivers/clk/meson/a1.c | 34 +-
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/clk/mes
Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.
Signed-off-by: Igor Prusov
Reviewed-by: Sean Anderson
---
drivers/clk/clk_k210.c | 92 +-
1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/drivers/clk
Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.
Signed-off-by: Igor Prusov
---
drivers/clk/aspeed/clk_ast2600.c | 70
1 file changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/clk/aspeed/clk_ast2600.c b/driv
Currently clock providers may override default implementation of
soc_clk_dump function to replace clk dump command output. This causes
confusing behaviour when u-boot is built with one of such drivers
enabled but still has clocks defined using CCF. For example, enabling
CMD_CLK and using clk dump o
1 - 100 of 145 matches
Mail list logo
