On Thu, 21 Sept 2023 at 10:02, Simon Glass wrote:
>
> Hi Masahisa,
>
> On Fri, 15 Sept 2023 at 04:17, Masahisa Kojima
> wrote:
> >
> > Current wget takes the target uri in this format:
> > ":" e.g.) 192.168.1.1:/bar
> > The http server ip address must be resolved before
> > calling wget.
> >
>
Hello,
Thank you for your patch,
On 9/21/23 18:37, Artur Rojek wrote:
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer.
Co-developed-by: Jakub Klama
Signed-off-by: Jakub Klama
Co-developed-by: Marcin Jabrzyk
Signed-off-by: Marcin Jabrzyk
Signed-off-by: Artur Rojek
---
On 9/14/2023 6:21 PM, Heinrich Schuchardt wrote:
> On 9/14/23 09:42, Wu, Fei wrote:
>> On 9/14/2023 3:20 PM, Heinrich Schuchardt wrote:
>>> On 9/14/23 08:48, Wu, Fei wrote:
On 9/14/2023 2:05 PM, Heinrich Schuchardt wrote:
>
>
> Am 14. September 2023 07:30:55 MESZ schrieb Fei Wu
>>>
Hi Masahiro
On 21/09/23 21:06, Masahiro Yamada wrote:
Hi.
Since the TI platform migrated to binman,
u-boot.img is built twice.
It is created by "mkimage -E",
then overwritten by binman.
So, the data are embedded in the FIT structure
instead of being appended.
Is this intentional?
To me, it
MDC clock change needs to be done when the driver probe function
is called as mdio is enabled at probe and not when the ethernet starts.
Setup the MDC clock at the probe itself.
Signed-off-by: Venkatesh Yadav Abbarapu
---
drivers/net/zynq_gem.c | 73 +++---
1
+Simon
Hi Eric,
On Fri, Sep 22, 2023 at 6:10 AM Eric Schikschneit
wrote:
>
> I have begun working on adding support for the Intel Graphics Management bus
> to U-Boot. Currently the x86 bring up process (as explored on the Baytrail
> series of Atom SOCs) relys on the Intel Video BIOS to do all
On 2023/9/21 22:47, Eugen Hristev wrote:
On 8/1/23 10:28, Eugen Hristev wrote:
This series adds support for DFU in SPL for rockchip rk3588 on rock5b
board.
Namely, when SPL is loaded via rockusb (thus via USB), having the
`same-as-spl` boot order item, after having detected that it was loaded
As part of reviewing a new platform, Daniel Schwierzeck noted that we
can have an empty Makefile in the board directory and don't need an
empty board.c file as well. Further with further cleanup in the
Makefile we can now omit the Makefile entirely. Remove a number of now
unnecessary board.c and M
- None of the callers perform error checking and based on the non-empty
versions of this function, there's no checking to be done, so make
this a void.
- Add a default weak version of the function.
- Remove the empty versions of exynos_init now that we have a weak
version.
Signed-off-by: Tom
It is entirely possible at this point to have platforms in U-Boot that
do not have board-specific C code (just Kconfig or environment) and so
make it optional to have to descend in to and then build in the board
directory.
Signed-off-by: Tom Rini
---
Makefile | 2 +-
scripts/Makefile
On Thu, Sep 21, 2023 at 9:37 PM Simon Glass wrote:
>
> This is very annoying as it is quite slow on many machines. Also, U-Boot
> has an existing 'preboot' mechanism to enable this feature if desired.
>
> Drop this code so that it is possible to choose whether to init USB or
> not.
>
> Use the exi
On Thu, Sep 21, 2023 at 9:37 PM Simon Glass wrote:
>
> Move this control into the common area of the main Makefile, so it
> applies to non-build rules as well. This allows 'make mrproper' to handle
> python files as it should.
>
> This should be squashed into:
>
>65a33eba10d Allow Python packa
On Thu, Sep 21, 2023 at 3:42 PM Daniel Schwierzeck
wrote:
> I played around a bit and following simplified code compiles on various
> MIPS32 and MIPS64 boards. (E.g. "echo CONFIG_FS_SQUASHFS=y >>
> configs/malta[|64|el|64el]_defconfig && make malta[|64|el|64el]_defconfig")
>
>
>
> /* SPDX-License
On Thu, 2023-09-07 at 13:21, Heinrich Schuchardt wrote:
> Multiple revisions of the StarFive VisionFive 2 board exist. They can be
> identified by reading their EEPROM.
>
> Linux uses two differently named device-tree files. To load the correct
> device-tree we need to set $fdtfile to the device-t
On Thu, Sep 21, 2023 at 09:36:01AM +0800, Leo Liang wrote:
> Hi Tom,
>
> The following changes since commit b9b83a86f0e84e837191db120c279a9cc0e3434b:
>
> Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sh
> (2023-09-17 09:25:42 -0400)
>
> are available in the Git rep
On Thu, Sep 21, 2023 at 02:56:59PM +0200, Michal Simek wrote:
> Hi Tom,
>
> please pull these patches to your next branch.
> I am sending it as v2 in spite of v1 didn't really went through. I created
> tag but CI failed because of sandbox CI trace failure. After fixing it and
> reviewing by Simon
On Thu, Sep 21, 2023 at 09:28:46AM +0800, Leo Liang wrote:
> Hi Tom,
>
> The following changes since commit c58ee1c9946a1550b1f6fee2b25da9ecc89baf71:
>
> Merge branch '2023-09-19-tidy-up-some-kconfig-options' into next
> (2023-09-19 17:44:18 -0400)
>
> are available in the Git repository at:
Binman[1] is a tool for creating firmware images. It allows you to
combine various binaries and place them in an output file.
Binman uses a DT schema to describe an image, in enough detail that
it can be automatically built from component parts, disassembled,
replaced, listed, etc.
Images are typ
The current imx8mp-dhcom-som.dtsi describes production rev.200 SoM,
add DT overlay which reinstates rev.100 SoM description to permit
prototype rev.100 SoMs to be used until they get phased out.
Signed-off-by: Marek Vasut
---
Cc: "NXP i.MX U-Boot Team"
Cc: Algapally Santosh Sagar
Cc: Fabio Este
In case the i.MX8MP DHCOM rev.100 has been populated on the PDK3
carrier board, the on-SoM PHY PHYAD1 signal has been pulled high
by the carrier board and changed the PHY MDIO address from 5 to 7.
This has been fixed on production rev.200 SoM by additional buffer
on the SoM PHYAD/LED signals, remov
The current imx8mp-dhcom-som.dtsi describes prototype rev.100 SoM,
update the DT to describe production rev.200 SoM which brings the
following changes:
- Fast SoC GPIOs exposed on the SoM edge connector
- Slow GPIOs like component resets moved to I2C GPIO expander
- ADC upgraded from TLA2024 to ADS
Add DT overlays to support additional DH i.MX8MP DHCOM SoM 660-100
population options with 1x or 2x RMII PHY mounted on PDK2 or PDK3
carrier boards.
Use SPL DTO support to apply matching SoM specific DTO to cater
for the SoM differences. Remove ad-hoc patching of control DT from
fdtdec_board_setup
Add board-specific function used to indicate whether a DTO from fitImage
configuration node 'fdt' property DT and DTO list should be applied onto
the base DT or not applied.
This is useful in case of DTOs which implement e.g. different board revision
details, where such DTO should be applied on on
Hi Rob,
On Thu, 21 Sept 2023 at 07:59, Rob Herring wrote:
>
> On Tue, Sep 19, 2023 at 3:26 PM Simon Glass wrote:
> >
> > Hi Rob,
> >
> > On Mon, 18 Sept 2023 at 11:00, Rob Herring wrote:
> > >
> > > On Thu, Sep 14, 2023 at 5:42 PM Simon Glass wrote:
> > > >
> > > > Hi Rob,
> > > >
> > > > On W
On Thu, Sep 21, 2023 at 04:00:24PM +0200, Daniel Schwierzeck wrote:
[snip]
> I just tested it, you can simply add an empty board/inteno/xg6846/Makefile and
> remove board/inteno/xg6846/xg6846.c. But you can also remove the Makefile.
> Just the Kconfig and MAINTAINERS file are needed.
An empty Mak
The EEPROM memory on this board is microchip 24aa025e48 which is compatible with
at24c02 with a page size of 16. Fix the compatible accordingly.
Fixes: a79714f268 ("ARM: dts: Add device tree files for sam9x60_curiosity")
Signed-off-by: Durai Manickam KR
---
arch/arm/dts/at91-sam9x60_curiosity.dt
Enable the EBI and NAND flash controller. Define the pinctrl and
partition table.
Signed-off-by: Durai Manickam KR
---
arch/arm/dts/at91-sam9x60_curiosity.dts | 104
1 file changed, 104 insertions(+)
diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts
b/arch/arm/dts/a
Add boot from NAND flash support for sam9x60_curiosity.
Signed-off-by: Durai Manickam KR
---
board/atmel/sam9x60_curiosity/MAINTAINERS | 1 +
configs/sam9x60_curiosity_nandflash_defconfig | 92 +++
2 files changed, 93 insertions(+)
create mode 100644 configs/sam9x60_curiosi
- Enable Device model supported NAND driver configs in SDMMC defconfig.
- Enable SYSRESET for Atmel/Microchip's platforms.
Signed-off-by: Durai Manickam KR
---
configs/sam9x60_curiosity_mmc_defconfig | 14 ++
1 file changed, 14 insertions(+)
diff --git a/configs/sam9x60_curiosity_mm
This patch series adds boot from NAND support, configs update and
fixes. The changes has been done on top of u-boot version 2023.07.
Durai Manickam KR (4):
configs: at91: sam9x60_curiosity: update
sam9x60_curiosity_mmc_defconfig
configs: at91: sam9x60_curiosity: Add
sam9x60_curiosity_
AVS driver needs to be notified before or after clock change,
depending upon new rate is greater or less than current clock rate.
Fixes: 1e0aa873bc7cd ("clk: clk-ti-sci: Notify AVS driver upon setting clock
rate")
Cc: Keerthy
Signed-off-by: Udit Kumar
---
Boot logs
https://gist.github.com/udit
On 9/21/23 5:49 AM, Manorit Chawdhry wrote:
After the refactor with conf- nodes in fitImage, overlaystring wasn't
didn't handle the new conf- nodes in FIT Booting. Fix get_overlaystring
to handle conf- nodes.
Fixes: 837833a724b7 ("environment: ti: Add get_fit_config command to get FIT config
st
AVS is enabled at R5 SPL stage, on few platforms like J721E
and J7200 clk-k3 is used instead if clk-sci driver.
Add support in clk-k3 driver as well to notify AVS driver
on setting clock rate so that voltage is changed accordingly.
Cc: Keerthy
Signed-off-by: Udit Kumar
---
Boot logs with v4:
ht
Hi Rob,
On Thu, 21 Sept 2023 at 09:20, Rob Herring wrote:
>
> On Thu, Sep 21, 2023 at 9:38 AM Simon Glass wrote:
> >
> > Hi Rob,
> >
> > On Thu, 21 Sept 2023 at 08:25, Rob Herring wrote:
> > >
> > > On Thu, Sep 7, 2023 at 4:40 PM Simon Glass wrote:
> > > >
> > > > It is common to split firmwar
El Mon, Jun 19, 2023 at 01:47:52PM +0300, Eugen Hristev deia:
> The second parameter for clk_release_all is used as an unsigned
> (which makes sense) but the function prototype declares it as an int.
> This causes warnings/error like such below:
>
> include/clk.h:422:48: error: conversion to ‘int’
Hi,
On Wed, 13 Sept 2023 at 07:35, Maxim Uvarov wrote:
>
>
>
> On Wed, 13 Sept 2023 at 19:14, Tom Rini wrote:
>>
>> On Wed, Sep 13, 2023 at 11:06:13AM +0100, Peter Robinson wrote:
>> > > >> Then if for development you need to pull he history of lwip, you can
>> > > >> do it with:
>> > > >> git
Hi Artur,
On Thu, 21 Sept 2023 at 09:44, Artur Rojek wrote:
>
> Provide function prototype for populate_serial_number().
> This is useful for boards that wish to read their serial number from
> EEPROM at init.
>
> Signed-off-by: Artur Rojek
> ---
> include/init.h | 1 +
> 1 file changed, 1 inse
On Fri, Sep 22, 2023 at 12:03 AM Masahiro Yamada wrote:
>
> Hi.
>
> I am seeing a boot failure on AM64-SK.
>
>
> I got the following error in SPL of the main core.
> Do you have any clue?
As a side-topic, I downloaded a prebuilt image
from https://www.ti.com/tool/SK-AM64
It failed too (but in
On Thu, Sep 21, 2023 at 04:00:24PM +0200, Daniel Schwierzeck wrote:
>
>
> On 9/20/23 20:55, Tom Rini wrote:
> > On Wed, Sep 20, 2023 at 08:51:07PM +0200, Linus Walleij wrote:
> > > On Wed, Sep 20, 2023 at 4:22 PM Tom Rini wrote:
> > >
> > > > > + * This is a diet version of the device tree from
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer.
Co-developed-by: Jakub Klama
Signed-off-by: Jakub Klama
Co-developed-by: Marcin Jabrzyk
Signed-off-by: Marcin Jabrzyk
Signed-off-by: Artur Rojek
---
arch/arm/dts/Makefile | 3 +
arch/arm/dts/at91-
Provide function prototype for populate_serial_number().
This is useful for boards that wish to read their serial number from
EEPROM at init.
Signed-off-by: Artur Rojek
---
include/init.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/init.h b/include/init.h
index 3bf30476a2e0..e0b7
Hi all,
this series adds support for Conclusive KSTR-SAMA5D27, a Microchip
SAMA5D27 SoC based Single Board Computer by Conclusive Engineering.
Patch [1/2] adds a missing prototype for populate_serial_number(), which
is used by KSTR-SAMA5D27 in order to read its serial number embedded in
EEPROM TL
Calculate the maximum length of the buffer when writing
accross the page boundary. If the buffer length exceeds
the page boundary, split it. Use this length instead of
comparing the length with the pagesize, because the write
start address can be somewhere in the middle of a page.
Signed-off-by: A
On Thu, Sep 21, 2023 at 05:03:37PM +0530, mchit...@ventanamicro.com wrote:
> On Thu, 2023-09-14 at 12:29 -0400, Tom Rini wrote:
> > On Thu, Sep 14, 2023 at 03:38:21PM +0530, Mayuresh Chitale wrote:
> >
> > > Some platforms as described by EBBR specification may store images
> > > in
> > > the FIRM
On Wed, Sep 20, 2023 at 07:03:07PM -0600, Simon Glass wrote:
> Hi Maxim,
>
> On Thu, 14 Sept 2023 at 10:20, Maxim Uvarov wrote:
> >
> > add external lwIP library as a git submodule.
>
> Oh dear...what is the motivation for using a submodule?
That we don't have a better alternative. Using "git
Hi.
Since the TI platform migrated to binman,
u-boot.img is built twice.
It is created by "mkimage -E",
then overwritten by binman.
So, the data are embedded in the FIT structure
instead of being appended.
Is this intentional?
To me, it looks weird.
To confirm it, apply the following hack
On Wed, Sep 20, 2023 at 07:03:34PM -0600, Simon Glass wrote:
> Hi Tom,
>
> On Wed, 30 Aug 2023 at 15:39, Tom Rini wrote:
> >
> > On Wed, Aug 30, 2023 at 12:04:40PM -0600, Simon Glass wrote:
> > > Use an accessor in the header file to avoid this.
> > >
> > > Signed-off-by: Simon Glass
> > > ---
>
On Wed, Sep 20, 2023 at 07:03:25PM -0600, Simon Glass wrote:
> Hi Tom,
>
> On Fri, 15 Sept 2023 at 15:54, Tom Rini wrote:
> >
> > On Fri, Sep 15, 2023 at 02:01:33PM -0600, Simon Glass wrote:
> > > Hi Tom,
> > >
> > > On Fri, 15 Sept 2023 at 13:48, Tom Rini wrote:
> > > >
> > > > On Thu, Sep 14,
On Thu, Sep 21, 2023 at 9:38 AM Simon Glass wrote:
>
> Hi Rob,
>
> On Thu, 21 Sept 2023 at 08:25, Rob Herring wrote:
> >
> > On Thu, Sep 7, 2023 at 4:40 PM Simon Glass wrote:
> > >
> > > It is common to split firmware into 'Platform Init', which does the
> > > initial hardware setup and a "Paylo
On 9/21/23 13:14, Michal Simek wrote:
On 9/19/23 14:47, Polak, Leszek wrote:
Add missing SelectMAP bootmode for proper identification during boot.
The SelectMAP configuration interface provides an 8-bit, 16-bit or
32-bit bidirectional data bus interface to the Versal FPGA
configuration logic
Hi.
I am seeing a boot failure on AM64-SK.
I got the following error in SPL of the main core.
Do you have any clue?
Error reading cluster
fit read sector 0, sectors=985528, dst=, count=18446744073709551615,
size=0xf09b8
The resulting count looks crazy, but I imagine it was just
that the nega
On 6/19/23 13:33, Eugen Hristev wrote:
From: Ziyuan Xu
Per dw_mmc databook, it's recommended to reset the host controller if
some data-related error occurred.
Implement a reset mechanism.
Signed-off-by: Ziyuan Xu
Co-developed-by: Jason Zhu
Signed-off-by: Jason Zhu
[eugen.hris...@collabora.c
On 6/19/23 13:47, Eugen Hristev wrote:
The second parameter for clk_release_all is used as an unsigned
(which makes sense) but the function prototype declares it as an int.
This causes warnings/error like such below:
include/clk.h:422:48: error: conversion to ‘int’ from ‘unsigned int’ may change
On 8/1/23 10:28, Eugen Hristev wrote:
This series adds support for DFU in SPL for rockchip rk3588 on rock5b
board.
Namely, when SPL is loaded via rockusb (thus via USB), having the
`same-as-spl` boot order item, after having detected that it was loaded
from USB, it will lookup the gadget USB nod
Hi Rob,
On Thu, 21 Sept 2023 at 08:25, Rob Herring wrote:
>
> On Thu, Sep 7, 2023 at 4:40 PM Simon Glass wrote:
> >
> > It is common to split firmware into 'Platform Init', which does the
> > initial hardware setup and a "Payload" which selects the OS to be booted.
> > Thus an handover interface
On Thu, Sep 7, 2023 at 4:40 PM Simon Glass wrote:
>
> It is common to split firmware into 'Platform Init', which does the
> initial hardware setup and a "Payload" which selects the OS to be booted.
> Thus an handover interface is required between these two pieces.
>
> This aims to provide an small
On 9/20/23 09:42, Linus Walleij wrote:
This adds support for the Inteno XG6846 board based on the
Broadcom MIPS 6328 SoC.
The default boot will read a uImage from flash and boot it.
Cc: Daniel Schwierzeck
Signed-off-by: Linus Walleij
---
arch/mips/dts/Makefile | 1 +
arch/
On 9/20/23 20:55, Tom Rini wrote:
On Wed, Sep 20, 2023 at 08:51:07PM +0200, Linus Walleij wrote:
On Wed, Sep 20, 2023 at 4:22 PM Tom Rini wrote:
+ * This is a diet version of the device tree from Linux,
+ * suitable for U-Boot.
+ */
We shouldn't need a diet version of the tree. If it's
On Tue, Sep 19, 2023 at 3:26 PM Simon Glass wrote:
>
> Hi Rob,
>
> On Mon, 18 Sept 2023 at 11:00, Rob Herring wrote:
> >
> > On Thu, Sep 14, 2023 at 5:42 PM Simon Glass wrote:
> > >
> > > Hi Rob,
> > >
> > > On Wed, 13 Sept 2023 at 16:39, Rob Herring wrote:
> > > >
> > > > On Fri, Sep 8, 2023 a
Hi Linus,
On 9/18/23 08:11, Linus Walleij wrote:
Squashfs wasn't compiling because the lldiv() directives
turn into __udivdi3 and we are using private libgcc.
This is just copied from the Linux kernel v6.6-rc1
arch/mips/include/asm/div64.h and then adjusted for
U-Boot.
After this squashfs compi
Refresh the summary information so it is more up-to-date. Add links to
the coreboot and slimbootloader docs.
Signed-off-by: Simon Glass
Reviewed-by: Bin Meng
---
Changes in v7:
- Drop patches previously applied
- Rebase to x86/next
Changes in v2:
- Add new patch
- Add new patch
doc/arch/x86/
This is very annoying as it is quite slow on many machines. Also, U-Boot
has an existing 'preboot' mechanism to enable this feature if desired.
Drop this code so that it is possible to choose whether to init USB or
not.
Use the existing USE_PREBOOT mechanism instead.
Signed-off-by: Simon Glass
Move this control into the common area of the main Makefile, so it
applies to non-build rules as well. This allows 'make mrproper' to handle
python files as it should.
This should be squashed into:
65a33eba10d Allow Python packages to be dropped
Signed-off-by: Simon Glass
---
Changes in v7:
This little series fixes various bugs and annoyances in coreboot and
coreboot64.
With this both coreboot and coreboot64 start up and work reasonably well
on Brya (x86 Chromebook) and U-Boot can boot common Linux distros.
- Make coreboot64 debug UART start reliably
- Avoid the long USB-init delay
Hi Tom,
please pull these patches to your next branch.
I am sending it as v2 in spite of v1 didn't really went through. I created tag
but CI failed because of sandbox CI trace failure. After fixing it and reviewing
by Simon I am adding it to be able to extend ofnode functions for getting
funct
Hi Bin,
On Thu, 21 Sept 2023 at 00:31, Bin Meng wrote:
>
> Hi Simon,
>
> On Thu, Sep 21, 2023 at 1:27 PM Bin Meng wrote:
> >
> > Hi Simon,
> >
> > On Wed, Sep 20, 2023 at 11:00 AM Simon Glass wrote:
> > >
> > > This little series fixes various bugs and annoyances in coreboot and
> > > coreboot6
On Thu, 2023-09-14 at 12:39 -0400, Tom Rini wrote:
> On Thu, Sep 14, 2023 at 09:35:15PM +0530, Mayuresh Chitale wrote:
>
> > If FS_LOADER is enabled for the SPL then the build fails with the
> > error:
> >
> > fs/fs.o:(.data.rel.fstypes+0x128):
> > undefined reference to `smh_fs_set_blk_dev'
> >
On Thu, 2023-09-14 at 12:29 -0400, Tom Rini wrote:
> On Thu, Sep 14, 2023 at 03:38:20PM +0530, Mayuresh Chitale wrote:
> > If a disk has an EFI system partition (ESP) then it can be used to
> > locate the boot files. Add a function to find the ESP.
> >
> > Signed-off-by: Mayuresh Chitale
> > Revi
On Thu, 2023-09-14 at 12:29 -0400, Tom Rini wrote:
> On Thu, Sep 14, 2023 at 03:38:21PM +0530, Mayuresh Chitale wrote:
>
> > Some platforms as described by EBBR specification may store images
> > in
> > the FIRMWARE directory of the UEFI system partition(ESP). Add
> > support
> > to boot from the
From: Algapally Santosh Sagar
The baudrate configured in .config is taken by default by serial. If
change of baudrate is required then the .config needs to changed and
u-boot recompilation is required or the u-boot environment needs to be
updated.
To avoid this, support is added to fetch the bau
From: Algapally Santosh Sagar
Move the DEFAULT_ENV_IS_RW to Kconfig for easier configuration.
Hence, add the CONFIG_DEFAULT_ENV_IS_RW config to the defconfig files
to allow enabling them for armada boards.
Signed-off-by: Algapally Santosh Sagar
Signed-off-by: Venkatesh Yadav Abbarapu
Reviewed-
In this patch series
- Add support in Kconfig and convert for armada boards
- Fetch baudrate from the dtb and update
Changes in v8:
- Added test to cover fetch_baud_from_dtb.
- Changed this check_valid_baudrate() to static and removed
from serial.h
- Fixed the compilation error.
Changes in v7
From: Andrej Rosano
Use DM_I2C and DM_SERIAL as it is now mandatory.
Signed-off-by: Andrej Rosano
---
configs/usbarmory_defconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/configs/usbarmory_defconfig b/configs/usbarmory_defconfig
index 66c969f95e..277f055aef 100644
Now we have to use UCLASS_SM driver instead of
raw smc_call() function call.
Signed-off-by: Alexey Romanov
Reviewed-by: Simon Glass
---
arch/arm/mach-meson/Kconfig | 1 +
arch/arm/mach-meson/sm.c| 110 +++-
2 files changed, 58 insertions(+), 53 deletions(-)
The common.h header should always be first, followed
by other headers in order, then headers with directories,
then local files.
Signed-off-by: Alexey Romanov
Reviewed-by: Simon Glass
---
arch/arm/mach-meson/sm.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm
This patch adds an implementation of the Meson Secure Monitor
driver based on UCLASS_SM.
Signed-off-by: Alexey Romanov
Reviewed-by: Simon Glass
---
MAINTAINERS | 1 +
drivers/sm/Kconfig| 7 ++
drivers/sm/Makefile | 1 +
drivers/sm/meson-sm.c | 198 +
We use this option to test UCLASS_SM.
Signed-off-by: Alexey Romanov
Reviewed-by: Simon Glass
---
configs/sandbox_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index be46cae7aa..0745a4ecca 100644
--- a/configs/sandbox_defconfi
This patchs adds simple tests for Secure Monitor uclass.
Signed-off-by: Alexey Romanov
Reviewed-by: Simon Glass
---
test/dm/Makefile | 1 +
test/dm/sm.c | 65
2 files changed, 66 insertions(+)
create mode 100644 test/dm/sm.c
diff --git a/t
We need this to test UCLASS_SM.
Signed-off-by: Alexey Romanov
Reviewed-by: Simon Glass
---
arch/sandbox/dts/test.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index dffe10adbf..4475aa58a6 100644
--- a/arch/sandbox/dts/test.dts
This patch adds sandbox secure monitor driver.
Signed-off-by: Alexey Romanov
Reviewed-by: Simon Glass
---
drivers/sm/Makefile | 1 +
drivers/sm/sandbox-sm.c | 76 +
include/sandbox-sm.h| 18 ++
3 files changed, 95 insertions(+)
create mo
Hello!
At the moment, there is no single general approach to using
secure monitor in U-Boot, there is only the smc_call() function,
over which everyone builds their own add-ons. This patchset
is designed to solve this problem by adding a new uclass -
SM_UCLASS. This UCLASS export following generic
At the moment, we don't have a common API for working with
SM, only the smc_call() function. This approach is not generic
and difficult to configure and maintain.
This patch adds UCLASS_SM with the generic API:
- sm_call()
- sm_call_write()
- sm_call_read()
These functions operate with struct pt
From: Algapally Santosh Sagar
The baudrate configured in .config is taken by default by serial. If
change of baudrate is required then the .config needs to changed and
u-boot recompilation is required or the u-boot environment needs to be
updated.
To avoid this, support is added to fetch the bau
From: Algapally Santosh Sagar
Move the DEFAULT_ENV_IS_RW to Kconfig for easier configuration.
Hence, add the CONFIG_DEFAULT_ENV_IS_RW config to the defconfig files
to allow enabling them for armada boards.
Signed-off-by: Algapally Santosh Sagar
Signed-off-by: Venkatesh Yadav Abbarapu
Reviewed-
In this patch series
- Add support in Kconfig and convert for armada boards
- Fetch baudrate from the dtb and update
Changes in v7:
- Updated the commit message.
Changes in v6:
- Changed Kconfig OF_SERIAL_DT_BAUD to OF_SERIAL_BAUD.
- Added IS_ENABLED() in place of #ifdef CONFIG_OF_SERIAL_AUD
Cha
This series tidies up SPL a little and adds some core ofnode functions
needed to support Universal Payload. It also includes a few minor fix-ups
for sandbox.
For SPL the changes include CONFIG naming, removing various #ifdefs and
tidying up the FIT code.
One notable piece of the ofnode improvemen
On 9/19/23 14:47, Polak, Leszek wrote:
Add missing SelectMAP bootmode for proper identification during boot.
The SelectMAP configuration interface provides an 8-bit, 16-bit or
32-bit bidirectional data bus interface to the Versal FPGA
configuration logic that can be used for both configuratio
On 9/15/23 05:17, Venkatesh Yadav Abbarapu wrote:
Change flush cache to invalidate cache and also fix
cache related issues are seen with small sized data reads.
Due to this, proper data is not read. Also some times
sf probe fails randomly.
Ashok Reddy Soma (1):
spi: zynqmp_qspi: Change flu
On 9/15/23 06:50, Tejas Bhumkar wrote:
Current code expects bridge phy address at 0 which is not correct
expectation because bridge phy address is configurable.
That's why update the code to read reg property to figure it out
where bridge is and use it in phy creation code.
Signed-off-by: Mic
On 9/15/23 14:12, Michal Simek wrote:
Hi,
sandbox is getting bigger and bigger and I have reached the case that
adding some more functions ends up in CI loop failure. After some
investigation I found that flyrecord header have incorrect information
about data offset which is caused by incorre
On 9/20/23 04:54, Venkatesh Yadav Abbarapu wrote:
When flash erase is called with size parameter, code is checking
if sectors are locked or not. But for checking, the whole device
length minus offset is used instead of actual size which should
be erased. That's why when only some sectors are l
Update the MAINTAINERS file and propose a new MAINTAINER for j721s2 due
to the previous MAINTAINER not being associated with TI.
Reviewed-by: Nishanth Menon
Signed-off-by: Manorit Chawdhry
---
board/ti/j721s2/MAINTAINERS | 11 +--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --
Add the documentation for J721S2-EVM and SK-AM68
TRM for J721S2/AM68: https://www.ti.com/lit/pdf/spruj28
Product Page for J721S2: https://www.ti.com/tool/J721S2XSOMXEVM
Product Page for AM68: https://www.ti.com/tool/SK-AM68
Reviewed-by: Neha Malcom Francis
Reviewed-by: Nishanth Menon
Signed-off
The following commit syncs the device tree from Linux tag
v6.6-rc1 to U-boot and fixes the following to be compatible with
the future syncs -
- Include k3-am68-sk-base-board.dts file
Remove the duplicated pinmuxes from r5 and -u-boot.dtsi files and
include k3-am68-sk-base-board.dts for Li
The following commit syncs the device tree from Linux tag
v6.6-rc1 to U-boot and fixes the following to be compatible with
the future syncs -
- Include k3-j721s2-common-proc-board.dts file
Remove the duplicated pinmuxes from r5 and -u-boot.dtsi files and
include k3-j721s2-common-proc-boar
mcu_timer0 is used by u-boot as the tick-timer. Add it to the soc
devices lsit so it an be enabled via the k3 power controller.
Reviewed-by: Neha Malcom Francis
Reviewed-by: Nishanth Menon
Signed-off-by: Manorit Chawdhry
---
arch/arm/mach-k3/j721s2/dev-data.c | 1 +
1 file changed, 1 insertion
The update causes instability in am68-sk boards so revert the patch in
the meantime till fix is available.
This reverts commit f1edf4bb6aa19732574ac23ca90cb9a0ba395ec1.
Signed-off-by: Manorit Chawdhry
---
arch/arm/dts/k3-j721e-ddr-evm-lp4-4266.dtsi | 98 +++---
arch/arm/dts/k3-j721s2-ddr-evm-
From: Udit Kumar
The malloc capacity in DRAM at R5 SPL is set to 1MB which isn't
sufficient to load the new tispl.bin to
enable loading of tispl.bin the size is increased by 256KB to 1.25MB.
Cc: Nikhil M Jain
Signed-off-by: Udit Kumar
Reviewed-by: Nishanth Menon
Signed-off-by: Manorit Chawdhr
The sync tries to ensure that U-boot remains functional with the updated
Linux DTS and all the fixes from Linux move to U-boot during the sync.
The series tries to sync from Linux v6.6-rc1 along with addition of
the documentation for J721S2 that had been previously missing.
DMA fixes [0] are curr
After the refactor with conf- nodes in fitImage, overlaystring wasn't
didn't handle the new conf- nodes in FIT Booting. Fix get_overlaystring
to handle conf- nodes.
Fixes: 837833a724b7 ("environment: ti: Add get_fit_config command to get FIT
config string")
Reported-by: Aniket Limaye
Signed-off-
1 - 100 of 107 matches
Mail list logo
