On Tue, Aug 08, 2023 at 08:39:57PM +0800, Shengyu Qu wrote:
> Add Kconfig item for Starfive JH7110 to select SPL_ZERO_MEM_BEFORE_USE.
>
> Signed-off-by: Bo Gan
> Signed-off-by: Shengyu Qu
> ---
> arch/riscv/cpu/jh7110/Kconfig | 1 +
> 1 file changed, 1 insertion(+)
Reviewed-by: Leo Yu-Chi Lian
Hi Shengyu,
On Tue, Aug 08, 2023 at 08:39:56PM +0800, Shengyu Qu wrote:
> Add the actual support code for SPL_ZERO_MEM_BEFORE_USE and remove
> existing Starfive JH7110's L2 LIM clean code, since existing code has
> following issues:
> 1. Each hart (in the middle of a function call) overwriting it
On Tue, Aug 08, 2023 at 08:39:55PM +0800, Shengyu Qu wrote:
> Add a Kconfig item to allow SPL to clear stack/GD/malloc area before
> using them.
>
> Signed-off-by: Bo Gan
> Signed-off-by: Shengyu Qu
> ---
> arch/riscv/Kconfig | 8
> 1 file changed, 8 insertions(+)
Reviewed-by: Leo Yu-
On 03.08.23 16:54, Andrew Davis wrote:
> All K3 boards now are secure by default, instead of setting this in each
> defconfig, make it implied by the ARCH config.
>
> The only exception is IOT2050, which I do not believe will have any
> problems with being a TI_SECURE_DEVICE, but for now turn it o
9 серпня 2023 р. 05:03:41 GMT+03:00, Simon Glass
написав(-ла):
>Hi Svyatoslav,
>
>On Mon, 31 Jul 2023 at 12:07, Svyatoslav Ryhel wrote:
>>
>>
>>
>> 31 липня 2023 р. 20:08:06 GMT+03:00, Simon Glass
>> написав(-ла):
>> >Hi Svyatoslav,
>> >
>> >On Sun, 30 Jul 2023 at 01:23, Svyatoslav Ryhel w
On 8/7/2023 9:42 PM, Fabio Estevam wrote:
From: Fabio Estevam
To make it consistent with the instructions from other NXP imx8m boards,
such as imx8mm-evk and imx8mn-evk, use U-Boot in-tree build in the
examples.
Signed-off-by: Fabio Estevam
Reviewed-by: Peng Fan
On 8/7/2023 9:42 PM, Fabio Estevam wrote:
From: Fabio Estevam
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has
been used to generate the flash.bin, it is no longer needed to do
such manual export.
The ATF address is now passed via binman in imx8mp-u-boot.dtsi:
Hi,
On Tue, 25 Jul 2023 at 03:47, Minda Chen wrote:
>
> As the Designware_i2c_pci.c uses ACPI APIs, If some SoCs (StarFive
> JH7110) contain Designware i2c and PCI but do not use ACPI,
> This file will be can't be compiled. So add a new Kconfig for
> designware_i2c_pci.c, which depends on ACPIGEN
On Tue, 8 Aug 2023 at 16:53, Sean Anderson wrote:
>
> With CONFIG_IS_ENABLED we can eliminate some ifdefs.
>
> Signed-off-by: Sean Anderson
> Reviewed-by: Heinrich Schuchardt
> ---
>
> (no changes since v1)
>
> common/dlmalloc.c | 9 ++---
> 1 file changed, 2 insertions(+), 7 deletions(-)
>
On Tue, 8 Aug 2023 at 14:36, Tom Rini wrote:
>
> To help guide developers down the right path, begin a document that
> lists some best practices to follow when creating a new board port.
>
> Signed-off-by: Tom Rini
> ---
> Cc: Heinrich Schuchardt
> Changes in v2:
> - Apply feedback from Heinrich
Hi,
On Tue, 8 Aug 2023 at 15:42, Tom Rini wrote:
>
> On Wed, Jul 26, 2023 at 10:01:21AM +0300, Dan Carpenter wrote:
>
> > This code has a & vs && typo so it only preserves odd value error
> > codes and not even value error codes.
> >
> > Signed-off-by: Dan Carpenter
> > Reviewed-by: Simon Glass
On Tue, 8 Aug 2023 at 16:53, Sean Anderson wrote:
>
> On boards with size restrictions, 1-2k can be a significant fraction of
> the binary size. Add a new SPL version of SYS_MALLOC_RUNTIME_INIT and
> enable it by default.
>
> Signed-off-by: Sean Anderson
> ---
>
> (no changes since v1)
>
> Kconf
Hi Frieder,
On Mon, 7 Aug 2023 at 06:19, Frieder Schrempf
wrote:
>
> Hi Simon, hi Stefano,
>
> On 04.08.23 15:39, Stefano Babic wrote:
> > Hi Simon,
> >
> > On 04.08.23 05:42, Simon Glass wrote:
> >> Hi,
> >>
> >> On Thu, 3 Aug 2023 at 07:21, Stefano Babic wrote:
> >>>
> >>> Hi Frieder,
> >>>
>
Hi Robert,
On Fri, 28 Jul 2023 at 07:39, Robert Wenisch wrote:
>
> Hi Simon,
>
> meanwhile I've tried booting from an FIT image. I.e. I wrote an ist file and
> baked an itb for booting.
> However, that gave me errors along the lines of "Wrong image format for bootm
> command".
I wonder whethe
Hi Alper,
On Tue, 8 Aug 2023 at 13:19, Alper Nebi Yasak wrote:
>
> Commit 716161663ec49 ("riscv: qemu: Enable Bochs video support") enables
> a video console for QEMU RISC-V virtual machines using an emulated Bochs
> VGA card. Similarly, enable it for ARM virtual machines as well.
>
> Signed-off-
On Tue, 8 Aug 2023 at 16:53, Sean Anderson wrote:
>
> Instead of marking malloc as initialized as soon as relocation is done,
> defer it until after we call mem_malloc_init. This ensures that malloc
> initialization is done before we switch away from simple_malloc, and
> matches the SPL behavior.
Hi,
On Tue, 8 Aug 2023 at 13:25, Tom Rini wrote:
>
> On Fri, Aug 04, 2023 at 02:33:36PM +0100, Abdellatif El Khlifi wrote:
>
> > Adding support for Arm FF-A v1.0 (Arm Firmware Framework for Armv8-A) [A].
> >
> > FF-A specifies interfaces that enable a pair of software execution
> > environments
On Mon, 31 Jul 2023 at 23:24, Heinrich Schuchardt wrote:
>
> On 8/1/23 00:33, Sean Anderson wrote:
> > With CONFIG_IS_ENABLED we can eliminate some ifdefs.
> >
> > Signed-off-by: Sean Anderson
>
> Reviewed-by: Heinrich Schuchardt
>
Reviewed-by: Simon Glass
Hi Alvaro,
On Fri, 4 Aug 2023 at 06:42, Alvaro Fernando García
wrote:
>
> Hello Simon,
>
> El vie, 4 ago 2023 a la(s) 00:02, Simon Glass (s...@google.com) escribió:
>>
>> Hi,
>>
>> On Thu, 3 Aug 2023 at 18:37, Alvaro Fernando García
>> wrote:
>> >
>> > 533ad9dc avoided an overflow but causes co
Hi,
On Fri, 4 Aug 2023 at 17:34, wrote:
>
> From: Dhananjay Phadke
>
> fdt_fixup_kaslr_seed() will update given FDT with random seed value.
> Source for random seed can be TPM or RNG driver in u-boot or sec
> firmware (ARM).
>
> Signed-off-by: Dhananjay Phadke
> ---
> arch/arm/cpu/armv8/sec_fi
Hi Jonas,
On Sat, 5 Aug 2023 at 07:32, Jonas Karlman wrote:
>
> Devices for nodes with e.g. bootph-pre-ram are initialized three times.
> 1. At SPL stage (always bind and probe only if used)
> 2. At U-Boot proper pre-reloc (always bind and probe)
> 3. At U-Boot proper normal (always bind and prob
On Tue, 8 Aug 2023 at 16:53, Sean Anderson wrote:
>
> When we enable malloc_init, there is no need to statically initialize
> av_, since we are going to do it manually. This lets us move av_ to
> .bss, saving around 1-2k of data (depending on the pointer size).
>
> cALLOc must be adjusted to not a
Hi,
On Fri, 4 Aug 2023 at 17:34, wrote:
>
> From: Dhananjay Phadke
>
> Add support for KASLR seed from TPM device. Invokes tpm_get_random()
> API to read 8-bytes of random bytes for KASLR.
>
> Signed-off-by: Dhananjay Phadke
> Signed-off-by: Drew Kluemke
> Signed-off-by: Sean Edmond
> ---
>
Hi Luis,
On Tue, 8 Aug 2023 at 17:09, Luis Alfredo da Silva
wrote:
>
> I compiled u-boot version 2023-07 and boot it on a RPi CM4 using a PCIe M.2
> NVMe drive, but it doesn't appear to be working.
>
> Once u-boot has started and boot successfully it recognizes the PCIe device
> giving me the nex
Hi Svyatoslav,
On Mon, 31 Jul 2023 at 12:07, Svyatoslav Ryhel wrote:
>
>
>
> 31 липня 2023 р. 20:08:06 GMT+03:00, Simon Glass
> написав(-ла):
> >Hi Svyatoslav,
> >
> >On Sun, 30 Jul 2023 at 01:23, Svyatoslav Ryhel wrote:
> >>
> >>
> >>
> >> 24 липня 2023 р. 05:28:24 GMT+03:00, Simon Glass
>
Hi,
On Tue, 8 Aug 2023 at 14:41, Mr Academia Euforia
wrote:
>
> Hi there,
>
> I'm working on certain feature to be added to ONIE that is running on
> Broadcom's Helix4 -based network switch. Part of the task is to add FIT
> signature signing to U-boot versions supported by ONIE. ONIE as part of t
On Tue, 8 Aug 2023 at 13:19, Alper Nebi Yasak wrote:
>
> Commit 02be57caf730 ("riscv: qemu: Enable usb keyboard as an input
> device") adds PCI xHCI support to QEMU RISC-V virtual machines and
> enables using a USB keyboard as one of the input devices. Similarly,
> enable those for ARM virtual mac
On Tue, 8 Aug 2023 at 13:19, Alper Nebi Yasak wrote:
>
> Commit 608b80b5b855 ("riscv: qemu: Enable PRE_CONSOLE_BUFFER") enables
> buffering console messages for QEMU RISC-V virtual machines so those
> printed before the video console is available will still show up on the
> display. Similarly, ena
On Wed, Jun 07, 2023 at 04:37:10PM -0700, William Zhang wrote:
> Add entry for Broadcom Broadband SoC HS SPI drivers
>
> Signed-off-by: William Zhang
Can you please rebase this rest of this series on top of current next
and fix the compiler warnings that show up, thanks.
--
Tom
signature.as
On Tue, 25 Jul 2023 17:08:44 -0400, Tom Rini wrote:
> Rather than invoking the script that will write to the mounted directory
> as a binary, source it as a script so that it has access to more than
> just two parameters. This will allow us to have the same flexibility in
> our writers that othe
On Thu, Aug 03, 2023 at 01:29:34PM +0300, Dan Carpenter wrote:
> The btrfs_decompress() function mostly (u32)-1 on error but it can
> also return -EPERM or other kernel error codes from zstd_decompress().
> The "ret" variable is an int, so we could just check for negatives.
>
> Signed-off-by: Dan
On Mon, Jul 31, 2023 at 05:08:41PM +0300, Dan Carpenter wrote:
> The x509_cert_parse() and pkcs7_parse_message() functions return error
> pointers. They don't return NULL. Update the checks accordingly.
>
> Signed-off-by: Dan Carpenter
> Reviewed-by: Simon Glass
Applied to u-boot/next, thank
On Mon, Jul 31, 2023 at 05:08:29PM +0300, Dan Carpenter wrote:
> This should be allocating the memory for "item" instead of "menu".
> The item struct is 48 bytes instead of 96 (assuming a 64bit system)
> so this saves a little memory.
>
> Signed-off-by: Dan Carpenter
> Reviewed-by: Simon Glass
On Mon, Jul 31, 2023 at 05:03:59PM +0300, Dan Carpenter wrote:
> Match the "=0x" instead of just "=0".
>
> Signed-off-by: Dan Carpenter
> Reviewed-by: Heinrich.Schuchardt
> Reviewed-by: Simon Glass
> Reviewed-by: Ilias Apalodimas
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Descr
On Thu, Jul 27, 2023 at 06:50:14PM +0200, Heinrich Schuchardt wrote:
> If an error message contains a function name, it should match the name of
> the function throwing the message.
>
> Fixes: 7739d93d8288 ("pci: Match region flags using a mask")
> Signed-off-by: Heinrich Schuchardt
> Reviewed-b
On Thu, Jul 27, 2023 at 10:16:03AM +0300, Dan Carpenter wrote:
> This line break is not done correctly. We don't want to have all those
> tabs in the printed output.
>
> Signed-off-by: Dan Carpenter
> Reviewed-by: Simon Glass
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Descriptio
On Thu, Jul 27, 2023 at 10:12:58AM +0300, Dan Carpenter wrote:
> The u16_strlcat() is in units of u16 not bytes. So the limit needs to
> be ARRAY_SIZE() instead of sizeof().
>
> Signed-off-by: Dan Carpenter
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Description: PGP signature
On Thu, Jul 27, 2023 at 10:12:39AM +0300, Dan Carpenter wrote:
> These lines are supposed to be indented one more tab. Otherwise it's
> confusing to read.
>
> Signed-off-by: Dan Carpenter
> Reviewed-by: Patrick Delaunay
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Description: PGP
On Wed, Jul 26, 2023 at 10:00:33AM +0300, Dan Carpenter wrote:
> We know that "pa" is non-NULL so it's nicer to just return zero instead
> of return !pa. This has no effect on runtime behavior.
>
> Signed-off-by: Dan Carpenter
> Reviewed-by: Simon Glass
Applied to u-boot/next, thanks!
--
To
On Wed, Jul 26, 2023 at 09:59:52AM +0300, Dan Carpenter wrote:
> The "oftree_count" is the number of entries which have been set in
> the oftree_list[] array. If all the entries have been initialized then
> this off by one would result in reading one element beyond the end
> of the array.
>
> Si
On Wed, Jul 26, 2023 at 09:59:04AM +0300, Dan Carpenter wrote:
> If btrfs_read_fs_root() fails with -ENOENT, then we go to the next
> entry. Fine. But if it fails for a different reason then we need
> to clean up and return an error code. In the current code it
> doesn't clean up but instead de
On Wed, Jul 26, 2023 at 09:58:34AM +0300, Dan Carpenter wrote:
> The ec_command_inptr() function returns negative error codes or
> the number of bytes that it was able to read. The cros_ec_get_sku_id()
> function should return negative error codes. Right now it returns
> positive error codes or
On Tue, Jul 25, 2023 at 09:50:26AM +0300, Dan Carpenter wrote:
> The parentheses are in the wrong place so this passes the number of
> bytes to write as "sizeof(index_0) != TPM_SUCCESS" when just
> "sizeof(index_0)" was intended. (1 byte vs 4 bytes).
>
> Signed-off-by: Dan Carpenter
Applied to
On Tue, Jul 25, 2023 at 09:50:08AM +0300, Dan Carpenter wrote:
> This returns the wrong variable. It ends up returning NULL when it was
> suppose to return an error pointer.
>
> Signed-off-by: Dan Carpenter
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sat, Jul 22, 2023 at 12:15:21AM +0800, Bin Meng wrote:
> Some coding convention fixes for print_resetinfo().
>
> Signed-off-by: Bin Meng
> Reviewed-by: Simon Glass
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Jul 14, 2023 at 05:39:32PM +0300, Ilya Lukin wrote:
> Fixes: 3db711085752 ("crc32: Use the crc.h header for crc functions")
> Signed-off-by: Ilya Lukin <4.sh...@gmail.com>
Applied to u-boot/next, thanks!
--
Tom
signature.asc
Description: PGP signature
On Fri, Jul 14, 2023 at 01:24:51PM +0200, Matthias Schiffer wrote:
> strlcat returns min(strlen(dest), count)+strlen(src). Make u16_strlcat's
> behaviour the same for consistency.
>
> Fixes: eca08ce94ceb ("lib/charset: add u16_strlcat() function")
> Signed-off-by: Matthias Schiffer
Applied to u
On Fri, Jul 14, 2023 at 01:24:50PM +0200, Matthias Schiffer wrote:
> Both the Linux kernel and libbsd agree that strlcpy() should always
> return strlen(src) and not include the NUL termination. The incorrect
> U-Boot implementation makes it impossible to check the return value for
> truncation, a
On Wed, Jul 26, 2023 at 09:54:08AM +0300, Dan Carpenter wrote:
> The VNBYTES() macro needs to have parentheses to prevent some (harmless)
> macro expansion bugs. The VNBYTES() macro is used like this:
>
> VID_TO_PIXEL(x) * VNBYTES(vid_priv->bpix)
>
> The * operation is done before the / o
On Tue, Aug 8, 2023 at 10:54 AM Simon Glass wrote:
>
> Hi Tim,
>
> On Mon, 7 Aug 2023 at 14:03, Tim Harvey wrote:
> >
> > On Sun, Jul 30, 2023 at 7:50 PM Simon Glass wrote:
> > >
> > > Hi Tim,
> > >
> > > On Sun, 30 Jul 2023 at 17:42, Tim Harvey wrote:
> > > >
> > > >
> > > > On Wed, Jul 26, 20
I compiled u-boot version 2023-07 and boot it on a RPi CM4 using a PCIe M.2
NVMe drive, but it doesn't appear to be working.
Once u-boot has started and boot successfully it recognizes the PCIe device
giving me the next output
U-Boot> pci
BusDevFun VendorId DeviceId Device Class Sub-Cl
In my efforts to get SPL to fit into flash after some changes I made, I
noticed that av_ is one of the largest variables in SPL. As it turns
out, we can generate it at runtime, and the code is already there. This
has the potential to save 1-2k across the board, for some (very) minor
boot time incre
When we enable malloc_init, there is no need to statically initialize
av_, since we are going to do it manually. This lets us move av_ to
.bss, saving around 1-2k of data (depending on the pointer size).
cALLOc must be adjusted to not access top before malloc_init.
While we're at it, rename/rewor
On boards with size restrictions, 1-2k can be a significant fraction of
the binary size. Add a new SPL version of SYS_MALLOC_RUNTIME_INIT and
enable it by default.
Signed-off-by: Sean Anderson
---
(no changes since v1)
Kconfig | 11 +++
1 file changed, 11 insertions(+)
diff --git a/Kc
With CONFIG_IS_ENABLED we can eliminate some ifdefs.
Signed-off-by: Sean Anderson
Reviewed-by: Heinrich Schuchardt
---
(no changes since v1)
common/dlmalloc.c | 9 ++---
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index 0f9b7262d51..
Instead of marking malloc as initialized as soon as relocation is done,
defer it until after we call mem_malloc_init. This ensures that malloc
initialization is done before we switch away from simple_malloc, and
matches the SPL behavior.
Fixes: c9356be3074 ("dm: Split the simple malloc() implement
On 8/8/23 23:40, Fabio Estevam wrote:
From: Fabio Estevam
SPDX-License tag is missing and checkpatch complains about it.
Add the SPDX-License tag using the same one from imx7d-sdb.dts.
Signed-off-by: Fabio Estevam
---
arch/arm/dts/imx7d-sdb-u-boot.dtsi | 2 ++
1 file changed, 2 insertions
On 8/8/23 23:40, Fabio Estevam wrote:
From: Fabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementin
On 8/8/23 23:40, Fabio Estevam wrote:
From: Fabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementin
Hi Elena,
On 08/08/2023 08:58, Elena Popa wrote:
If dram_init_banksize() is called from SPL, the rom_pointer, at that
point, is not correctly initialized. This causes wrong calculation of
DRAM start and size in dram_init_banksize(). The issue became apparent
only in Falcon Mode. Added an extra c
On Wed, Jul 26, 2023 at 10:01:21AM +0300, Dan Carpenter wrote:
> This code has a & vs && typo so it only preserves odd value error
> codes and not even value error codes.
>
> Signed-off-by: Dan Carpenter
> Reviewed-by: Simon Glass
> ---
> drivers/power/regulator/regulator-uclass.c | 2 +-
> 1
From: Fabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fa
From: Fabio Estevam
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.
Signed-off-by: Fa
From: Fabio Estevam
SPDX-License tag is missing and checkpatch complains about it.
Add the SPDX-License tag using the same one from imx7d-sdb.dts.
Signed-off-by: Fabio Estevam
---
arch/arm/dts/imx7d-sdb-u-boot.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/imx7d-sdb-u
Hi there,
I'm working on certain feature to be added to ONIE that is running on
Broadcom's Helix4 -based network switch. Part of the task is to add FIT
signature signing to U-boot versions supported by ONIE. ONIE as part of the
build process uses uboot snapshots, and applies platform patches on to
On 8/8/23 21:17, Fabio Estevam wrote:
Hi Marek,
On Mon, Jun 26, 2023 at 5:53 AM Marek Vasut wrote:
Add weak default reset_cpu() implementation needed by e.g. panic().
Signed-off-by: Marek Vasut
---
Cc: "NXP i.MX U-Boot Team"
Cc: Fabio Estevam
Cc: Stefano Babic
---
arch/arm/mach-imx/cpu
To help guide developers down the right path, begin a document that
lists some best practices to follow when creating a new board port.
Signed-off-by: Tom Rini
---
Cc: Heinrich Schuchardt
Changes in v2:
- Apply feedback from Heinrich
---
doc/develop/board_best_practices.rst | 26 +++
On 8/8/23 00:15, Tom Rini wrote:
To help guide developers down the right path, begin a document that
lists some best practices to follow when creating a new board port.
Signed-off-by: Tom Rini
---
doc/develop/board_best_practices.rst | 26 ++
doc/develop/index.rst
On Fri, Aug 04, 2023 at 02:33:36PM +0100, Abdellatif El Khlifi wrote:
> Adding support for Arm FF-A v1.0 (Arm Firmware Framework for Armv8-A) [A].
>
> FF-A specifies interfaces that enable a pair of software execution
> environments aka partitions to
> communicate with each other. A partition co
Commit 02be57caf730 ("riscv: qemu: Enable usb keyboard as an input
device") adds PCI xHCI support to QEMU RISC-V virtual machines and
enables using a USB keyboard as one of the input devices. Similarly,
enable those for ARM virtual machines as well.
Signed-off-by: Alper Nebi Yasak
---
arch/arm/
Commit 608b80b5b855 ("riscv: qemu: Enable PRE_CONSOLE_BUFFER") enables
buffering console messages for QEMU RISC-V virtual machines so those
printed before the video console is available will still show up on the
display. Similarly, enable it for ARM virtual machines as well.
Signed-off-by: Alper N
Commit 716161663ec49 ("riscv: qemu: Enable Bochs video support") enables
a video console for QEMU RISC-V virtual machines using an emulated Bochs
VGA card. Similarly, enable it for ARM virtual machines as well.
Signed-off-by: Alper Nebi Yasak
---
arch/arm/Kconfig | 4
Now that the driver for the Bochs VGA card emulated by QEMU is no longer
limited to x86 architectures [1], this series enables it on arm and
arm64 virtual machines to provide a graphical interface. In line with
that series this also enables console buffering and USB keyboard.
Tested with the Debia
Hi Marek,
On Mon, Jun 26, 2023 at 5:53 AM Marek Vasut wrote:
>
> Add weak default reset_cpu() implementation needed by e.g. panic().
>
> Signed-off-by: Marek Vasut
> ---
> Cc: "NXP i.MX U-Boot Team"
> Cc: Fabio Estevam
> Cc: Stefano Babic
> ---
> arch/arm/mach-imx/cpu.c | 4
> 1 file ch
Hi Maxim
[...]
> > > +static int lwip_empty_tmo(void) { return 0; };
> > > +int (*ulwip_tmo)(void) = lwip_empty_tmo;
> > > +void ulwip_set_tmo(int (*tmo)(void))
> > > +{
> > > + ulwip_tmo = tmo;
> > > +}
> > > +
> > > +static void ulwip_clear_tmo(void)
> > > +{
> > > + ulwip_tmo = lwip_em
Hi Tim,
On Mon, 7 Aug 2023 at 14:03, Tim Harvey wrote:
>
> On Sun, Jul 30, 2023 at 7:50 PM Simon Glass wrote:
> >
> > Hi Tim,
> >
> > On Sun, 30 Jul 2023 at 17:42, Tim Harvey wrote:
> > >
> > >
> > > On Wed, Jul 26, 2023, 5:55 PM Simon Glass wrote:
> > >>
> > >> Hi Tim,
> > >>
> > >> On Mon, 2
Hi Maxim,
On Tue, 8 Aug 2023 at 04:07, Maxim Uvarov wrote:
>
>
>
>
> On Thu, 3 Aug 2023 at 22:21, Maxim Uvarov wrote:
>>
>>
>>
>> On Thu, 3 Aug 2023 at 03:32, Simon Glass wrote:
>>>
>>> Hi Maxim,
>>>
>>> On Wed, 2 Aug 2023 at 08:11, Maxim Uvarov wrote:
>>> >
>>>
>>> subject: U-Boot
>>>
>>> com
Hi Chanho,
On Tue, 8 Aug 2023 at 01:35, Chanho Park wrote:
>
> Since the Patch 55171aedda88, VisionFive2 booting has been broken [1].
> VisionFive2 board requires to enable CONFIG_TIMER_EARLY but booting went
> to panic from initr_dm_devices due to lack of a timer device.
>
> - Error logs
> initc
Hi Maxim,
On Tue, 8 Aug 2023 at 08:06, Maxim Uvarov wrote:
>
>
>
> On Thu, 3 Aug 2023 at 03:32, Simon Glass wrote:
>>
>> Hi Maxim,
>>
>> On Wed, 2 Aug 2023 at 08:11, Maxim Uvarov wrote:
>> >
>> > Replace original commands: ping, tftp, dhcp and wget.
>> >
>> > Signed-off-by: Maxim Uvarov
>> > -
On Mon, 7 Aug 2023 at 15:08, Tom Rini wrote:
>
> In order to reduce the number of people that are cc'd on a patch for
> simply touching arch/arm/dts/Makefile (which is a big common file) add
> an entry specifically to MAINTAINERS under the ARM entry.
>
> Signed-off-by: Tom Rini
> ---
> MAINTAINE
From: Yang Xiwen
So that it can be used by others.
Signed-off-by: Yang Xiwen
---
drivers/clk/clk-uclass.c | 5 -
include/linux/clk-provider.h | 5 +
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/clk-uclass.c b/drivers/clk/clk-uclass.c
index dc3e9d6a26..
From: Yang Xiwen
Calling into CCF framework will cause a clock being enabled twice
instead of once (clk->enable_count becomes 2 rather than 1), thus making
it hard to disable (needs to call clk_disable() twice).
Fix that by calling clock provided ops directly.
Signed-off-by: Yang Xiwen
---
dri
From: Yang Xiwen
it's a very common case to register a clock without a parent, such as
clk_register_fixed_rate(). Replace log_error() with log_debug() to avoid
useless console log if not debugging.
Signed-off-by: Yang Xiwen
---
drivers/clk/clk.c | 4 ++--
1 file changed, 2 insertions(+), 2 del
From: Yang Xiwen
If the device does not specify any clocks in device tree, these
functions will return PTR_ERR(-ENOENT). This is not the intended
behavior and does not comply with linux kernel CCF. Fix that by
returning NULL under such circumstances instead.
Signed-off-by: Yang Xiwen
---
inclu
They are found during my development for HiSilicon clock driver. Details
are in commit logs.
Signed-off-by: Yang Xiwen
---
Yang Xiwen (5):
clk: export clk_register_mux_table()
clk: call log_debug() instead to avoid console log printing
clk: also handle ENOENT in *_optional funct
From: Yang Xiwen
It's already implemented in clk-mux.c, export it in the header file.
Signed-off-by: Yang Xiwen
---
include/linux/clk-provider.h | 6 ++
1 file changed, 6 insertions(+)
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index b8acacd49e..801404480b 10
Marvell LinkStreet switches support Clause 45 MDIO on the internal bus.
C45 read or writes require the register address to be written first to
the SMI PHY Data register, and then a special C45 Write Address Register
OP is used on the SMI PHY Register before making a C45 Read Data Register
OP and b
Driver is currently defining the mask and bit shifting itself,
there is no need for that as U-Boot has generic bitfield macros that help
us achieve the same result but in a cleaner way.
Signed-off-by: Robert Marko
---
drivers/net/mv88e6xxx.c | 25 +
1 file changed, 13 ins
When Falcon Mode is enabled, spl_start_uboot() function must be defined. If
this function returns 0 then SPL should start the kernel, if it returns 1 then
U-Boot must be started.
When spl_start_uboot() returns 1, then U-Boot must be loaded, and as far as I
can tell spl_image->os should be set
Hello Michael,
Am Tue, Aug 08, 2023 at 03:49:45PM +0200 schrieb Michael Nazzareno Trimarchi:
> Hi
>
> On Tue, Aug 8, 2023 at 3:03 PM Alexander Dahl wrote:
> >
> > Adapt behaviour to Linux kernel driver.
> >
> > The return value of gpio_request_by_name_nodev() was not checked before,
> > and thus
Hello Mihai,
Am Tue, Aug 08, 2023 at 01:40:26PM + schrieb mihai.s...@microchip.com:
> Hi Alex,
>
> Please find bellow my answer:
>
> --
>
> Added Mihai who tested this a lot at some point in time
>
> Eugen
>
> On 8/8/23 16:02, Alexander Dahl wrote:
> > Hello ev
On 8/8/23 16:31, Peter Robinson wrote:
On Tue, Aug 8, 2023 at 3:27 PM Detlev Casanova
wrote:
On Tuesday, August 8, 2023 10:21:11 A.M. EDT Peter Robinson wrote:
On Thu, Jul 20, 2023 at 3:50 PM Detlev Casanova
wrote:
The command can be used to show various information that can be used to
ide
On Tue, Aug 8, 2023 at 3:27 PM Detlev Casanova
wrote:
>
> On Tuesday, August 8, 2023 10:21:11 A.M. EDT Peter Robinson wrote:
> > On Thu, Jul 20, 2023 at 3:50 PM Detlev Casanova
> >
> > wrote:
> > > The command can be used to show various information that can be used to
> > > identify the running
On Tuesday, August 8, 2023 10:21:11 A.M. EDT Peter Robinson wrote:
> On Thu, Jul 20, 2023 at 3:50 PM Detlev Casanova
>
> wrote:
> > The command can be used to show various information that can be used to
> > identify the running system.
> >
> > Currently supported subcommands are:
> > * model: A
Hi Jonas,
On Sun, 2023-07-23 at 15:04 +, Jonas Karlman wrote:
> On 2023-07-23 16:55, Jonas Karlman wrote:
> > The Pine64 Quartz64 Model A is a single-board computer based on the
> > Rockchip RK3566 SoC. The board features USB3, SATA, PCIe, HDMI, USB2.0,
> > CSI, DSI, eDP, eMMC, SD, and an e-pa
On Thu, Jul 20, 2023 at 3:50 PM Detlev Casanova
wrote:
>
> The command can be used to show various information that can be used to
> identify the running system.
>
> Currently supported subcommands are:
> * model: A string representing the model
> * id: The id of the board
> * revision: The revisi
On Thu, 3 Aug 2023 at 03:32, Simon Glass wrote:
> Hi Maxim,
>
> On Wed, 2 Aug 2023 at 08:11, Maxim Uvarov wrote:
> >
> > Replace original commands: ping, tftp, dhcp and wget.
> >
> > Signed-off-by: Maxim Uvarov
> > ---
> > boot/bootmeth_efi.c | 2 +-
> > boot/bootmeth_pxe.c | 2 +-
> > cmd/n
On Tue, Aug 08, 2023 at 04:42:15PM +0300, Elena Popa wrote:
> When Falcon Mode is enabled, SPL needs to check the value of
> CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Unfortunately, it was using the
> CONFIG_VAL(SYS_MMCSD_RAW_MODE_ARGS_SECTOR) which converts it into
> CONFIG_SPL_SYS_MMCSD_RAW_MODE_AR
When Falcon Mode is enabled, SPL needs to check the value of
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Unfortunately, it was using the
CONFIG_VAL(SYS_MMCSD_RAW_MODE_ARGS_SECTOR) which converts it into
CONFIG_SPL_SYS_MMCSD_RAW_MODE_ARGS_SECTOR when CONFIG_SPL_BUILD is
enabled. CONFIG_SPL_SYS_MMCSD_RAW_
Hi
On Tue, Aug 8, 2023 at 3:03 PM Alexander Dahl wrote:
>
> Adapt behaviour to Linux kernel driver.
>
> The return value of gpio_request_by_name_nodev() was not checked before,
> and thus in case 'rb-gpios' was missing in DT, rb.type was set to
> ATMEL_NAND_GPIO_RB nevertheless, leading to output
1 - 100 of 128 matches
Mail list logo
