Hi Sean,
Just tried again with -i and it works fine now!
Thanks,
Tony
On Fri, Dec 17, 2021 at 8:02 PM Sean Anderson wrote:
>
> On 12/17/21 10:59 PM, Tony Dinh wrote:
> > Hi Simon,
> >
> > I tried to send in patches to add support for a new board. patman
> > seems to hit a problem with "Bad divi
Add board maintainer for Pogoplug V4 board
Signed-off-by: Tony Dinh
---
board/cloudengines/pogo_v4/MAINTAINERS | 6 ++
1 file changed, 6 insertions(+)
create mode 100644 board/cloudengines/pogo_v4/MAINTAINERS
diff --git a/board/cloudengines/pogo_v4/MAINTAINERS
b/board/cloudengines/pogo_v
Add board implementation for Pogoplug V4
Note: currently the fdt_get_phy_addr function in this file is
duplicate in this board and many other Kirkwood boards
(eg. Sheevaplug, GoFlex Home, etc.). This function is being
factored out into common area by another patch. And because it
was written for f
Add board implementation header and Makefile for Pogoplug V4
Signed-off-by: Tony Dinh
---
board/cloudengines/pogo_v4/Makefile | 10
board/cloudengines/pogo_v4/pogo_v4.h | 36
2 files changed, 46 insertions(+)
create mode 100644 board/cloudengines/pogo_v4/
Add board kwbimage file for Pogoplug V4 board
Signed-off-by: Tony Dinh
---
board/cloudengines/pogo_v4/kwbimage.cfg | 148
1 file changed, 148 insertions(+)
create mode 100644 board/cloudengines/pogo_v4/kwbimage.cfg
diff --git a/board/cloudengines/pogo_v4/kwbimage.cfg
Add include configs file for Pogoplug V4 board
Signed-off-by: Tony Dinh
---
include/configs/pogo_v4.h | 94 +++
1 file changed, 94 insertions(+)
create mode 100644 include/configs/pogo_v4.h
diff --git a/include/configs/pogo_v4.h b/include/configs/pogo_v4.h
Add Kconfig files for Pogoplug V4 board
Signed-off-by: Tony Dinh
---
arch/arm/mach-kirkwood/Kconfig | 4
board/cloudengines/pogo_v4/Kconfig | 16
2 files changed, 20 insertions(+)
create mode 100644 board/cloudengines/pogo_v4/Kconfig
diff --git a/arch/arm/mach-kirkw
Add board defconfig file for Pogoplug V4 board
Signed-off-by: Tony Dinh
---
configs/pogo_v4_defconfig | 97 +++
1 file changed, 97 insertions(+)
create mode 100644 configs/pogo_v4_defconfig
diff --git a/configs/pogo_v4_defconfig b/configs/pogo_v4_defconfig
Add DTS files for Pogoplug V4 board
Signed-off-by: Tony Dinh
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/kirkwood-pogoplug_v4.dts | 145 ++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm/dts/kirkwood-pogoplug_v4.dts
diff --git a/arch
Pogoplug V4 specifications:
Kirkwood 88F6192 SoC
800 MHz CPU
1Gbs Ethernet
128 MB RAM
128 MB NAND
1x USB 2.0
2x USB 3.0 (on PCIe bus)
1 SDHC slot
1x External SATA port (USM enclosure form factor slot)
Tony Dinh (8):
arm: kirkwood: Pogoplug-V4 : Add DTS files
arm: kirkwood: Pogoplug V4 : Ad
On 12/17/21 10:59 PM, Tony Dinh wrote:
Hi Simon,
I tried to send in patches to add support for a new board. patman
seems to hit a problem with "Bad divisor in main" error and refuses to
send the patches. The warnings are not really important, are they? In
some instances, we need camel cases beca
Hi Simon,
I tried to send in patches to add support for a new board. patman
seems to hit a problem with "Bad divisor in main" error and refuses to
send the patches. The warnings are not really important, are they? In
some instances, we need camel cases because that is what the
convention in the sp
On Fri, Dec 17, 2021 at 5:00 AM Simon Glass wrote:
> Sync these file, obtained from Linux v5.15.
>
> Add a note for the maintainer, and SPDX lines where they are missing.
> The added lines are:
>
>SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>
> Note, this matches the text in those files,
On Fri, Dec 17, 2021 at 12:43:24PM -0700, Simon Glass wrote:
> Hi Tom,
>
> This is for the -next branch.
>
> https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/10299
>
> The following changes since commit b9c9ce8a4064c8d88f714604db856cf1cd2b40b5:
>
> Merge tag 'u-boot-at91-2022.0
On 12/17/21 6:12 PM, Simon Glass wrote:
Some boards still use the old timer mechanism. Set a deadline for them to
update to driver model. Point to some examples as well.
This needs a bit of a strange rule to avoid an error on some boards.
Signed-off-by: Simon Glass
---
Changes in v3:
- Pus
Hi Matthias,
On 12/16/21 5:26 AM, Matthias Schiffer wrote:
Having U-Boot look up the passed partition name even though an alias
exists is unexpected, leading to warning messages (when the alias name
doesn't exist as a real partition name) or the use of the wrong
partition.
Change part_get_info_
Hi Alexey,
On Sat, 10 Jul 2021 at 16:03, Alexey Brodkin
wrote:
>
> Hi Tom and Simon,
>
> So there're a couple of things involved indeed.
>
> As Tom correctly mentioned we used to use SNSP pre-built tools for ARC in
> TravisCI previously. And frankly the reason was we needed something GCC 8.x
>
Some boards still use the old timer mechanism. Set a deadline for them to
update to driver model. Point to some examples as well.
This needs a bit of a strange rule to avoid an error on some boards.
Signed-off-by: Simon Glass
---
Changes in v3:
- Push out the deadline
Makefile
Hi Angus,
On 12/17/21 10:41 AM, Angus Ainslie wrote:
uuu uses the blocksize to determine the upload size
Can you please elaborate on this more?
Signed-off-by: Angus Ainslie
---
drivers/fastboot/fb_getvar.c | 27 +++
1 file changed, 27 insertions(+)
diff --git a/
There are a number of symbols that are never defined, only referenced in
code imported from the Linux kernel or similar. Drop them from the list.
Signed-off-by: Tom Rini
---
scripts/config_whitelist.txt | 897 ---
1 file changed, 897 deletions(-)
diff --git a/sc
This converts the following to Kconfig:
CONFIG_88F5182
CONFIG_BOARD_IS_OPENRD_BASE
CONFIG_BOARD_IS_OPENRD_CLIENT
CONFIG_BOARD_IS_OPENRD_ULTIMATE
CONFIG_D2NET_V2
CONFIG_FEROCEON
CONFIG_FEROCEON_88FR131
CONFIG_INETSPACE_V2
CONFIG_KW88F6192
CONFIG_KW88F6281
CONFIG_KW88
This converts the following to Kconfig:
CONFIG_SYS_KWD_CONFIG
Signed-off-by: Tom Rini
---
arch/arm/Kconfig | 8
arch/arm/mach-kirkwood/include/mach/config.h | 9 -
arch/arm/mach-mvebu/include/mach/config.h| 9 -
configs/SBx81LIFKW_de
This converts the following to Kconfig:
CONFIG_JFFS2_DEV
CONFIG_JFFS2_LZO
CONFIG_JFFS2_NAND
CONFIG_JFFS2_PART_OFFSET
CONFIG_JFFS2_PART_SIZE
Signed-off-by: Tom Rini
---
README | 3 ---
cmd/Kconfig| 21 +
cmd/j
This converts the following to Kconfig:
CONFIG_KIRKWOOD_GPIO
Signed-off-by: Tom Rini
---
configs/SBx81LIFKW_defconfig | 1 +
configs/SBx81LIFXCAT_defconfig | 1 +
configs/d2net_v2_defconfig | 1 +
configs/dns325_defconfig | 1 +
configs/inetspace_v2_defconf
The only place we use CONFIG_CPU_ARMV8 was in the arm_dcc serial driver.
Switch this to CONFIG_ARM64 today, and if in the future we need finer
granularity tuning here, a new CONFIG_SERIAL option needs to be
introduced.
Signed-off-by: Tom Rini
---
drivers/serial/arm_dcc.c| 2 +-
include/c
This converts the following to Kconfig:
CONFIG_CPU_FREQ_HZ
Cc: Michal Simek
Signed-off-by: Tom Rini
---
arch/arm/mach-zynqmp-r5/Kconfig| 6 ++
configs/xilinx_zynqmp_r5_defconfig | 1 +
include/configs/xilinx_zynqmp_r5.h | 3 ---
include/configs/zynq-common.h | 5 -
4 files c
This converts the following to Kconfig:
CONFIG_CPU_PXA27X
Signed-off-by: Tom Rini
---
arch/arm/Kconfig | 6 +-
include/configs/colibri_pxa270.h | 1 -
scripts/config_whitelist.txt | 1 -
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/Kconfig b/
This converts the following to Kconfig:
CONFIG_SYS_I2C_EEPROM_ADDR_LEN
Signed-off-by: Tom Rini
---
include/configs/km/km-mpc832x.h | 3 ---
1 file changed, 3 deletions(-)
diff --git a/include/configs/km/km-mpc832x.h b/include/configs/km/km-mpc832x.h
index aac1e999e40a..888bb2981f7b 100644
--
This converts the following to Kconfig:
CONFIG_CPU_SH7751
Signed-off-by: Tom Rini
---
arch/sh/Kconfig | 6 +-
include/configs/r2dplus.h| 1 -
scripts/config_whitelist.txt | 1 -
3 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconf
This converts the following to Kconfig:
CONFIG_83XX_PCICLK
Signed-off-by: Tom Rini
---
arch/powerpc/cpu/mpc83xx/Kconfig | 7 +++
configs/kmcoge5ne_defconfig | 1 +
configs/kmopti2_defconfig| 1 +
configs/kmsupx5_defconfig| 1 +
configs/kmtegr1_defconfig| 1 +
Neither of these symbols are referenced anywhere else, so remove them.
Signed-off-by: Tom Rini
---
arch/powerpc/cpu/mpc83xx/start.S | 2 --
include/configs/km/km-mpc832x.h | 5 -
2 files changed, 7 deletions(-)
diff --git a/arch/powerpc/cpu/mpc83xx/start.S b/arch/powerpc/cpu/mpc83xx/start.
On 12/17/21 10:42 AM, Angus Ainslie wrote:
NXP mfgtool uses all to specify the entire partition
Signed-off-by: Angus Ainslie
---
drivers/fastboot/fb_mmc.c | 7 +++
1 file changed, 7 insertions(+)
diff --git a/drivers/fastboot/fb_mmc.c b/drivers/fastboot/fb_mmc.c
index 2738dc836e..9eb
Let the board specific dts files live in the board directory.
Signed-off-by: Troy Kisky
---
dts/Makefile | 11 +--
scripts/Makefile.lib | 1 +
2 files changed, 10 insertions(+), 2 deletions(-)
diff --git a/dts/Makefile b/dts/Makefile
index cb311138295..09b46f9fcfd 100644
--- a/
The adds boards whose defconfigs are in the board's directory.
Signed-off-by: Troy Kisky
---
tools/genboardscfg.py | 37 -
1 file changed, 36 insertions(+), 1 deletion(-)
diff --git a/tools/genboardscfg.py b/tools/genboardscfg.py
index 4ee7aa1f891..60e2fe5cf3
This makes it clearer which board uses a file.
Signed-off-by: Troy Kisky
---
arch/arm/dts/Makefile | 3 ---
board/boundary/nitrogen6x/MAINTAINERS | 13 -
board/boundary/nitrogen6x/Makefile | 13 +
.../boundary/
Let the board specific include file live in the board directory.
Signed-off-by: Troy Kisky
---
scripts/Makefile.autoconf | 9 +++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf
index 8a3efdb2db0..6a725a3e2ff 100644
--- a/
This will reduce the size of the configs directory, and
make it more clear which board directory uses the defconfig
file.
Signed-off-by: Troy Kisky
---
scripts/kconfig/Makefile | 9 -
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/
This series intends to let board specific files live in the boards
directory. The last patch moves files for nitrogen6x.
I have tested it with buildman
./tools/buildman/buildman boundary -b denx_master
But it is likely the more scripts then just tools/genboardscfg.py would
need to be updated.
Tr
Hi,
I've sent a patch to set a deadline for migration to CONFIG_TIMER,
i.e. using driver model for timers. This catches quite a lot of
boards, so please take a look.
Regards,
Simon
From: Rayagonda Kokatanur
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v11:
- fix condition for readl_poll_timeout in bspi_read_via_raf
Changes in
Show the revision of this table as it can be important.
Also update the 'efi table' entry to show the actual address of the EFI
table rather than our table that points to it. This saves a step and the
intermediate table has nothing else in it.
Signed-off-by: Simon Glass
---
Changes in v6:
- Fix
Instead of a custom cpu_reset function, use the sysreset_psci
instead to reduce redundant code clutter.
Signed-off-by: Adam Ford
diff --git a/board/beacon/beacon-rzg2m/beacon-rzg2m.c
b/board/beacon/beacon-rzg2m/beacon-rzg2m.c
index df6044a429..4b41c6fdaa 100644
--- a/board/beacon/beacon-rzg2m/b
Hi Tom,
This is for the -next branch.
https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/10299
The following changes since commit b9c9ce8a4064c8d88f714604db856cf1cd2b40b5:
Merge tag 'u-boot-at91-2022.04-a' of
https://source.denx.de/u-boot/custodians/u-boot-at91 into next (2021-12-
Make sure the linker lists are in the right place and drop the eh_frame
section, which is not needed.
Signed-off-by: Simon Glass
---
(no changes since v5)
Changes in v5:
- Add new patch to round out the link script for 64-bit EFI
arch/x86/lib/elf_x86_64_efi.lds | 5 -
1 file changed, 4 in
Add an empty CPU init function to avoid fiddling with low-level CPU
features in the app. Set up the C runtime correctly for 64-bit use
and avoid clearing BSS, since this is done by EFI when U-Boot is loaded.
Signed-off-by: Simon Glass
---
(no changes since v5)
Changes in v5:
- Add new patch to
At present some 32-bit settings are used with the 64-bit app. Fix this by
separating out the two cases.
Be careful not to break the 64-bit payload, which needs to build a 64-bit
EFI stub with a 32-bit U-Boot.
Signed-off-by: Simon Glass
---
(no changes since v5)
Changes in v5:
- Add new patch t
Now that the linker crash is resolved, build the 64-bit EFI app, including
all the required code.
Signed-off-by: Simon Glass
---
(no changes since v5)
Changes in v5:
- Add new patch to build the 64-bit app properly
- Add various patches to fix up the 64-bit app so that it boots
Changes in v2:
That script is not intended for use with EFI, so update the logic to avoid
using it.
Signed-off-by: Simon Glass
---
(no changes since v5)
Changes in v5:
- Add new patch to avoid using the 64-bit link script for the EFI app
arch/x86/cpu/config.mk | 2 +-
1 file changed, 1 insertion(+), 1 delet
At present the 'efi' command only works in the EFI payload. Update it to
work in the app too, so the memory map can be examined.
Signed-off-by: Simon Glass
---
(no changes since v1)
cmd/Makefile | 2 +-
cmd/efi.c | 48 ---
include/efi.h
Since EFI does not relocate and uses the same global_data pointer
throughout the board-init process, drop this unnecessary setup, to avoid
a hang.
Signed-off-by: Simon Glass
---
(no changes since v5)
Changes in v5:
- Add new patch to avoid setting up global_data again with EFI
common/board_r.
At present this function requires a pointer to struct efi_entry_memmap
but the only field used in there is the desc_size. We want to be able
to use it from the app, so update it to use desc_size directly.
Signed-off-by: Simon Glass
---
(no changes since v1)
arch/x86/cpu/efi/payload.c | 8
Add a message here so that both paths of memory allocation are reported.
Signed-off-by: Simon Glass
---
(no changes since v2)
Changes in v2:
- Use log_info() instead of printf()
lib/efi/efi_app.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/lib/efi/efi_app.c b/lib/efi
Add info about how to select vidconsole or serial.
Also set up a demo boot command.
Signed-off-by: Simon Glass
---
(no changes since v2)
Changes in v2:
- Add a better boot command too
include/configs/efi-x86_app.h | 25 +
1 file changed, 25 insertions(+)
diff --git a
At present this code is inline in the app and stub. But they do the same
thing. The difference is that the stub does it immediately and the app
doesn't want to do it until the end (when it boots a kernel) or not at
all, if returning to UEFI.
Move it into a function so it can be called as needed.
At present each of these has its own static variable and helper functions.
Move them into a shared file.
Signed-off-by: Simon Glass
---
(no changes since v1)
include/efi.h | 21 +
lib/efi/efi.c | 29 +
lib/efi/efi_app.c | 21 ++
The stub checks for failure with efi_init(). Add this for the app as well.
It is unlikely that anything can be done, but we may as well stop.
Signed-off-by: Simon Glass
---
Changes in v6:
- Use 'U-Boot' instead of 'ARP' typo
lib/efi/efi_app.c | 7 +--
1 file changed, 5 insertions(+), 2 del
This provides access to EFI tables after U-Boot has exited boot services.
It is not needed in the app since boot services remain alive and we can
just call them whenever needed.
Add a comment to explain this.
Signed-off-by: Simon Glass
---
Changes in v6:
- Fix 'stuff' typo in comment
- Update t
Comment some functions that need more information.
Signed-off-by: Simon Glass
---
Changes in v6:
- Fix comment style in setup_info_table()
lib/efi/efi_stub.c | 22 ++
1 file changed, 22 insertions(+)
diff --git a/lib/efi/efi_stub.c b/lib/efi/efi_stub.c
index b3393e47fae..e
This is not used anywhere drop it.
Signed-off-by: Simon Glass
---
(no changes since v3)
Changes in v3:
- Move device_path path change to its own patch
include/efi.h | 1 -
1 file changed, 1 deletion(-)
diff --git a/include/efi.h b/include/efi.h
index 908c5dc6ebd..77e599c256e 100644
--- a/inc
This should return false when the EFI app is running, since UEFI has done
the required low-level init. Fix it.
Signed-off-by: Simon Glass
---
(no changes since v1)
include/init.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/init.h b/include/init.h
index f2cd46dea
This structure is uncommented. Fix it.
Signed-off-by: Simon Glass
---
(no changes since v3)
Changes in v3:
- Drop comments that confuse sphinx
- Move device_path path change to its own patch
include/efi.h | 23 +++
1 file changed, 23 insertions(+)
diff --git a/include/efi
When starting the app, locate all block devices and make them available
to U-Boot. This allows listing partitions and accessing files in
filesystems.
EFI also has the concept of 'disks', meaning boot media. For now, this
is not obviously useful in U-Boot, but add code to at least locate these.
Thi
At present only 4KB of spare space is left in the DTB when building the
EFI app. Increase this to 32KB so there is plenty of space to insert the
binman definition. This cannot be expanded later (as with OF_SEPARATE)
because the ELF image has already been built.
Signed-off-by: Simon Glass
---
(no
At present this is disabled, but it should work so long as the kernel does
not need EFI services. Enable it and add a note about remaining work.
Signed-off-by: Simon Glass
---
(no changes since v2)
Changes in v2:
- Update documentation
arch/x86/lib/bootm.c | 11 +++
doc/
At present only the backspace key is supported in U-Boot, when running as
an EFI app. Add support for arrows, home and end as well, to make the CLI
more friendly.
Signed-off-by: Simon Glass
---
(no changes since v1)
drivers/serial/serial_efi.c | 11 +--
1 file changed, 9 insertions(+),
If the 'bootm' command is not enabled then this code is not available and
this causes a link error. Fix it.
Note that for the EFI app, there is no indication of missing code. It just
hangs!
Signed-off-by: Simon Glass
---
(no changes since v1)
arch/x86/lib/zimage.c | 13 -
1 file c
Add a block driver which handles read/write for EFI block devices. This
driver actually already exists ('efi_block') but is not really suitable
for use as a real U-Boot driver:
- The operations do not provide a udevice
- The code is designed for running as part of EFI loader, so uses
EFI_PRINT
At present UCLASS_EFI_LOADER is used to represent an EFI filesystem among
other things. The only driver that uses this uclass is in fact not a real
U-Boot driver, since its operations do not include a struct udevice.
Rather than mess with this, create a new UCLASS_EFI_MEDIA uclass to handle
EFI me
These names are better used for access to devices provided by an EFI
layer. Use EFI_LOADER instead here, since these are only available in
U-Boot's EFI_LOADER layer.
Signed-off-by: Simon Glass
Reviewed-by: Heinrich Schuchardt
---
Changes in v6:
- Update comment to UCLASS_EFI_LOADER
Changes in
At present U-Boot can be built as an EFI app, but it is really just for
testing, with very few features. Instead, the payload build is used for
booting on top of UEFI, where U-Boot takes over the machine immediately
and supplies its own drivers.
But the app could be made more useful.
This series
I have an RZ/G2 family of boards which has a USB 2.0 controller
connected to a hub with 4 ports on it.
I'm trying to run some hardware tests on the USB and when I issue the command:
usb test 0 1 P
I get a strange error and subsequently a message that looks like it's
executing successfully, ho
On 12/17/21 13:55, Jose Marinho wrote:
Signed-off-by: Jose Marinho
---
cmd/efidebug.c | 41 +
include/efi_loader.h | 2 ++
2 files changed, 43 insertions(+)
diff --git a/cmd/efidebug.c b/cmd/efidebug.c
index a53a5029fa..c3246e1820 100644
--- a/
On 12/17/21 13:55, Jose Marinho wrote:
The Conformance Profiles Table (ECPT) table will be included in the UEFI
specification 2.9+.
The change suggested in
https://bugzilla.tianocore.org/show_bug.cgi?id=3591
is a not well designed: How could the missing of a table ever be taken
as a sign of com
On Fri, Dec 17, 2021 at 2:03 PM Adam Ford wrote:
> I didn't think Driver model was a requirement for SPL.
That's my understanding as well.
> > I had problems getting the dwc3 to initialize properly when using the
> > device model in the SPL. I'm currently just using this in the SPL and
> > the
Hi Heinrich,
On Fri, 17 Dec 2021 at 10:14, Heinrich Schuchardt wrote:
>
> On 12/17/21 17:37, Simon Glass wrote:
> > Hi Heinrich,
> >
> > On Thu, 9 Dec 2021 at 12:44, Heinrich Schuchardt wrote:
> >>
> >> On 12/4/21 07:56, Simon Glass wrote:
> >>> At present only the backspace key is supported in
Hi,
On 09/10/2021 03:41, Tom Rini wrote:
> On Sat, Sep 25, 2021 at 07:43:38PM -0600, Simon Glass wrote:
>
>> Use boolean variables to deal with the strange #ifdef logic of this
>> function, so we can remove the #ifdefs.
>>
>> Signed-off-by: Simon Glass
>
> Applied to u-boot/master, thanks!
>
Hello! Could you look and review at this patch series?
On Friday 26 November 2021 11:42:40 Pali Rohár wrote:
> This patch series add new U-Boot macros for composing Config Address for
> PCI Configuration Mechanism #1 as defined in PCI Local Bus Specification,
> including extended variant (which do
There is no point to hide/disable fatal errors via debug() macro.
Print fatal errors loudly.
Signed-off-by: Pali Rohár
---
arch/arm/mach-mvebu/spl.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 29a8adc9d79c..6
IPROC qspi driver supports both BSPI and MSPI modes.
Signed-off-by: Rayagonda Kokatanur
Signed-off-by: Bharat Gooty
Acked-by: Rayagonda Kokatanur
Signed-off-by: Roman Bacik
---
Changes in v10:
- remove binding document
- use defined values for delays and timeouts
- replace timer-based logic w
Include file debug_uart.h already contains documentation how to use it.
Signed-off-by: Pali Rohár
---
arch/arm/mach-mvebu/spl.c | 13 -
1 file changed, 13 deletions(-)
diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 6a9e1d860cf7..29a8adc9d79c 100644
--- a/ar
On 12/17/21 13:55, Jose Marinho wrote:
Display the EBBRv2.0 conformance in the ECPT table.
The EBBRv2.0 conformance profile is set in the ECPT if
CONFIG_EFI_EBBR_2_0_CONFORMANCE=y.
The config defaults to 'n'.
Signed-off-by: Jose Marinho
---
include/efi_api.h| 4
lib/ef
On 12/17/21 13:55, Jose Marinho wrote:
The ECPT table will be included in the UEFI specification 2.9+.
The ECPT table was introduced in UEFI following the code-first path. The
acceptance ticket can be viewed at:
https://bugzilla.tianocore.org/show_bug.cgi?id=3591
The Conformance Profiles
On 12/17/21 17:37, Simon Glass wrote:
Hi Heinrich,
On Thu, 9 Dec 2021 at 12:44, Heinrich Schuchardt wrote:
On 12/4/21 07:56, Simon Glass wrote:
At present only the backspace key is supported in U-Boot, when running as
an EFI app. Add support for arrows, home and end as well, to make the CLI
On Fri, Dec 17, 2021 at 10:35 AM Angus Ainslie wrote:
>
> Hi Fabio,
>
> On 2021-12-17 08:28, Fabio Estevam wrote:
> > Hi Angus,
> >
> > On Fri, Dec 17, 2021 at 12:21 PM Angus Ainslie wrote:
> >>
> >> Add the USB regs for SDP mode
> >>
> >> Signed-off-by: Angus Ainslie
> >> ---
> >> arch/arm/inc
In strange cases it is possible for fdtgrep to find nothing to output.
Typically this means that the resulting SPL device tree is not going to
allow anything to boot, but at present the tree is actually invalid,
since it only has an END tag in the struct region.
The FDT spec requires at least a ro
When outputting a devicetree we should not align the struct section to a
16-byte boundary. The normal position is fine, which is 8-byte aligned.
This avoids leaving adding 8 extra zero bytes in the output tree in the
case where the reserved section is empty (i.e has 16 zero bytes).
Signed-off-by:
Hi Heinrich,
On Thu, 9 Dec 2021 at 13:34, Heinrich Schuchardt wrote:
>
> On 12/4/21 07:56, Simon Glass wrote:
> > Show the revision of this table as it can be important.
> >
> > Alo update the 'efi table' entry to show the actual address of the EFI
>
> %s/Alo/Also/
>
> > table rather than our tab
Hi Heinrich,
On Thu, 9 Dec 2021 at 13:27, Heinrich Schuchardt wrote:
>
> On 12/4/21 07:56, Simon Glass wrote:
> > At present the 'efi' command only works in the EFI payload. Update it to
> > work in the app too, so the memory map can be examined.
>
> cmd/efi.c seems to be duplicating function do_
Hi Heinrich,
On Sat, 4 Dec 2021 at 12:13, Heinrich Schuchardt wrote:
>
> On 12/4/21 16:56, Simon Glass wrote:
> > At present this code is inline in the app and stub. But they do the same
> > thing. The difference is that the stub does it immediately and the app
> > doesn't want to do it until the
Hi Heinrich,
On Thu, 9 Dec 2021 at 12:55, Heinrich Schuchardt wrote:
>
> On 12/4/21 07:56, Simon Glass wrote:
> > Add a message here so that both paths of memory allocation are reported.
> >
> > Signed-off-by: Simon Glass
> > ---
> >
> > (no changes since v2)
> >
> > Changes in v2:
> > - Use log
Hi Heinrich,
On Thu, 9 Dec 2021 at 12:44, Heinrich Schuchardt wrote:
>
> On 12/4/21 07:56, Simon Glass wrote:
> > At present only the backspace key is supported in U-Boot, when running as
> > an EFI app. Add support for arrows, home and end as well, to make the CLI
> > more friendly.
> >
> > Sign
Hi Heinrich,
On Thu, 9 Dec 2021 at 12:23, Heinrich Schuchardt wrote:
>
> On 12/4/21 10:43, Heinrich Schuchardt wrote:
> > On 12/4/21 16:56, Simon Glass wrote:
> >> When starting the app, locate all block devices and make them available
> >> to U-Boot. This allows listing partitions and accessing
On Tue, 14 Dec 2021 at 10:55, Andre Przywara wrote:
>
> The Juno Arm development board is an open, vendor-neutral, Armv8-A
> development platform.
> Add documentation that briefly outlines the hardware, and describes
> building and installation of U-Boot.
>
> Signed-off-by: Andre Przywara
> ---
>
Hi Andre,
On Tue, 14 Dec 2021 at 10:55, Andre Przywara wrote:
>
> From: Peter Hoyes
>
> Create a new documentation section for Arm Ltd boards with a sub-page
> for the FVP VExpress64 system.
>
> Signed-off-by: Peter Hoyes
> [Andre: remove Juno stub]
> Signed-off-by: Andre Przywara
> ---
> doc
Hi Andre,
On Tue, 14 Dec 2021 at 10:47, Andre Przywara wrote:
>
> The Calxeda servers are using U-Boot as the primary bootloader, which
> was shipped as part of a firmware upgrade package.
> Even though the machines are considered legacy at this point, the port
> still works, so deserves some doc
Hi Andre,
On Sun, 12 Dec 2021 at 18:03, Andre Przywara wrote:
>
> Add some long overdue instructions for building and installing U-Boot on
> Allwinner SoC based boards.
> This describes the building process, including TF-A and crust, plus
> installation to SD card, eMMC and SPI flash, both from L
Hi Michal,
On Wed, 15 Dec 2021 at 02:58, Michal Simek wrote:
>
> Add PSGTR driver for Xilinx ZynqMP.
> The most of configurations are taken from Linux kernel psgtr driver.
>
> USB3.0 and SGMII configurations are tested on SOM. In SGMII case also
> IOU_SLCR reg is updated to get proper clock setup
Hi Sean,
On Wed, 15 Dec 2021 at 08:53, Sean Anderson wrote:
>
>
> Hi all,
>
> I'm reviewing a clock driver [1], and the submitter has deviated from
> the defines used by Linux. For example, where Linux might have
>
> #define CLOCK_FOOBAR 5
>
> his driver might have
>
> #define CLK
Hi Fabio,
On 2021-12-17 08:28, Fabio Estevam wrote:
Hi Angus,
On Fri, Dec 17, 2021 at 12:21 PM Angus Ainslie wrote:
Add the USB regs for SDP mode
Signed-off-by: Angus Ainslie
---
arch/arm/include/asm/arch-imx8m/imx-regs.h | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/i
Hi Angus,
On Fri, Dec 17, 2021 at 12:21 PM Angus Ainslie wrote:
>
> Add the USB regs for SDP mode
>
> Signed-off-by: Angus Ainslie
> ---
> arch/arm/include/asm/arch-imx8m/imx-regs.h | 5 +
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h
> b/arc
1 - 100 of 125 matches
Mail list logo
