Dear Adam Ford,
In message <20210927183030.506532-1-aford...@gmail.com> you wrote:
> The macro called MUX_VAL generates a writel instruction with
> semicolon at the end. This table was written to use semicolons,
> however one was missed:
>
>MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4))
Hello Tom,
please pull from u-boot-i2c next
The following changes since commit 1d1f98c8eed7bb4792300e655c2cb70136928f74:
Merge tag 'dm-pull-next-27sep21' of
https://source.denx.de/u-boot/custodians/u-boot-dm into next
(2021-09-27 11:09:23 -0400)
are available in the Git repository at:
htt
Hello Adam,
On 24.08.21 16:10, Adam Ford wrote:
> The Linux i2c driver supports i2c-scl-rising-time-ns,
> and i2c-scl-falling-time-ns, but U-Boot uses hard-coded values
> for these values.
>
> Update the calculation by fetching them from the device tree if
> present and use the previous values as
Hello Samuel,
On 21.09.21 06:43, Heiko Schocher wrote:
> Hello Samuel,
>
> On 12.09.21 17:21, Samuel Holland wrote:
>> The controller may need to have clocks/resets enabled for it to work.
>> Add support for this. Since the clocks/resets are optional on some
>> platforms (per the device tree bind
Hello Patrice,
On 13.09.21 16:25, Patrice Chotard wrote:
> nand_dt_init() is still using fdtdec_xx() interface.
> If OF_LIVE flag is enabled, dt property can't be get anymore.
> Updating all fdtdec_xx() interface to ofnode_xx() to solve this issue.
>
> For doing this, node parameter type must be
Wdt expire command makes the wdt to count least possible ticks(1)
and expires immediately. Add expire_now option to the xlnx_wwdt_ops
and implement it by calling xlnx_wwdt_start() with minimum possible
count(1).
Signed-off-by: Ashok Reddy Soma
---
drivers/watchdog/xilinx_wwdt.c | 6 ++
1 fi
Existing driver uses generic watchdog mode which generates a signal to
PLM firmware, but the signal cannot be used to reset the system.
Change driver to use window watchdog basic mode. This window watchdog mode
generates a signal to PLM firmware which decides what action to take upon
expiry of wat
In this patch series fixed below things.
- Window watchdog is using generic watchdog mode so far. Looks like
this signal cannot be used to trigger any reset inside PLM. So,
change it to basic window watchdog mode.
- Wdt has a expire command, this was not implemented earlier.
Implement it
From: T Karthik Reddy
Clocks should be enabled or disabled only if they are of GATE type
clocks. If they are not of GATE type clocks, don't touch them.
Signed-off-by: T Karthik Reddy
Signed-off-by: Ashok Reddy Soma
---
drivers/clk/clk_versal.c | 5 -
1 file changed, 4 insertions(+), 1 de
Hi Tim
> -Original Message-
> From: Tim Harvey
> Sent: Friday, September 24, 2021 4:32 AM
> To: Gaurav Jain ; Peng Fan
> Cc: u-boot ; Stefano Babic ; Fabio
> Estevam ; Simon Glass ; Priyanka
> Jain ; Ye Li ; Horia Geanta
> ; Ji Luo ; Franck Lenormand
> ; Silvano Di Ninno ;
> Sahil Malhot
Hello Tim
> -Original Message-
> From: Tim Harvey
> Sent: Friday, September 24, 2021 4:10 AM
> To: Gaurav Jain
> Cc: u-boot ; Stefano Babic ; Fabio
> Estevam ; Peng Fan ; Simon Glass
> ; Priyanka Jain ; Ye Li
> ; Horia Geanta ; Ji Luo
> ; Franck Lenormand ; Silvano Di
> Ninno ; Sahil Mal
Hi Mark,
On Sun, 26 Sept 2021 at 09:53, Simon Glass wrote:
>
> Hi Mark,
>
> On Sat, 25 Sept 2021 at 10:46, Mark Kettenis wrote:
> >
> > > From: Simon Glass
> > > Date: Sat, 25 Sep 2021 08:42:30 -0600
> > >
> > > Hi Mark,
> > >
> > > On Sat, 25 Sept 2021 at 07:52, Mark Kettenis
> > > wrote:
>
在 2021/9/27 21:22, Jon Lin 写道:
Consulting to "NVM Express® Base Specification, revision 2.0".
If more PRP List pages are required, then the last entry of
the PRP List contains the Page Base Address of the next PRP
List page. The next PRP List page shall be memory page aligned.
Yep, this is in
在 2021/9/27 21:22, Jon Lin 写道:
Most NVME devcies maintain data in internal cache for an uncertain
times, and u-boot has no method to force NVME to flush cache.
So this patch adds FUA to avoid data loss caused by power off after data
programming.
Signed-off-by: Jon Lin
Reviewed-by: Stefan Agner
The SJA1105 driver is largely reused from Linux. Its programming model
is that it is blank out of reset, and it waits for a static
configuration stream over SPI, which contains all runtime parameters (it
has no notion of "default values").
Keeping a binary array for the configuration stream would
The DS1307 driver was originally based on the DS1337 driver. However,
the functionality of the clock set/get functions has diverged. In the
original DS1337 driver, the set/get functions did the following:
1) Setting the clock ensured the oscillator was enabled.
2) Getting the clock checked and
Configure SPI flash devices into SPL. Add SPI boot option to spl.c.
Document how to format flash for booting.
Signed-off-by: Thomas Skibo
---
.../dts/hifive-unmatched-a00-u-boot.dtsi | 11 +++
board/sifive/unmatched/spl.c | 3 ++
configs/sifive_unmatched_defconfig
Enable saving environment to SPI flash memory on SiFive
Unmatched.
Signed-off-by: Thomas Skibo
---
arch/riscv/cpu/fu740/Kconfig | 13 +
board/sifive/unmatched/Kconfig | 1 +
2 files changed, 14 insertions(+)
diff --git a/arch/riscv/cpu/fu740/Kconfig b/arch/riscv/cpu/fu740/Kconfig
This patch set adds support for booting the SiFive Unmatched board
from SPI flash memory and saving the environment to flash.
Thomas Skibo (2):
riscv: Support booting SiFive Unmatched from SPI.
riscv: Enable SPI flash env for SiFive Unmatched.
arch/riscv/cpu/fu740/Kconfig |
Anatolij,
Since commit d37618d18d49 ("imx: convert gwventana board to DM_VIDEO")
video support for IMX6 based Ventana boards has been broken.
I find that while the bind function for fsl_imx6q_ipu is called the
probe never is (ipuv3_video_probe). Do you know why this is?
I see that with commit 57
The sja1105 is a 5-port switch that uses a DM_DSA driver. Its 5th (CPU)
port is connected internally to the eth2 port of the LS1021A SoC.
Signed-off-by: Vladimir Oltean
---
configs/ls1021atsn_qspi_defconfig | 2 ++
configs/ls1021atsn_sdcard_defconfig | 2 ++
2 files changed, 4 insertions(+)
d
Instead of trying to guess which operating modes need in-band
negotiation to be active and which ones don't, parse the available
information from the device tree. That will be correct in the cases we
can already guess, and more.
Signed-off-by: Vladimir Oltean
---
drivers/net/mscc_eswitch/felix_s
Don't fail when booting a board with an empty EEPROM for MAC addresses.
Signed-off-by: Vladimir Oltean
---
configs/ls1021atsn_qspi_defconfig | 1 +
configs/ls1021atsn_sdcard_defconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/configs/ls1021atsn_qspi_defconfig
b/configs/ls1021atsn_
Certain serial SERDES protocols like 1000base-x, 2500base-x, SGMII,
USXGMII can operate either in a mode where the PHY (be it on-board or
inside an SFP module) passes the link parameters (speed, duplex, pause)
to the MAC through in-band through control words standardized by IEEE
802.3 clause 37, or
In the current DSA switch driver API, only the udevice of the switch
(belonging to UCLASS_DSA) is exposed, as well as an "int port" argument.
So drivers do not have access to the udevice of individual ports
(belonging to UCLASS_ETH), one of the reasons being that not all ports
have an associated UC
The eth aliases are for correct probing order, so that each Ethernet
port will get a predictable MAC address from the environment.
Signed-off-by: Vladimir Oltean
---
arch/arm/dts/ls1021a-tsn.dts | 103 +++
1 file changed, 103 insertions(+)
diff --git a/arch/arm/d
This is needed for the VLAN header structure.
Signed-off-by: Vladimir Oltean
---
include/linux/if_vlan.h | 26 ++
1 file changed, 26 insertions(+)
create mode 100644 include/linux/if_vlan.h
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
new file mode 100
The Freescale TSEC can be a DSA master, and the ports of the attached
DSA switch can have different MAC addresses compared to the TSEC.
Nonetheless, the TSEC must receive the packets on behalf of those switch
ports. Therefore, implement the promiscuous mode method to allow DSA to
set this.
Note th
The NXP LS1021A-TSN board (and many others) contains an automotive
Ethernet switch. Some boards only have Ethernet ports routed through the
switch, and it is therefore desirable to have TFTP functional.
These patches add support for the SJA1105 and SJA1110 switch family
(tested on first-gen SJA110
CONFIG_FSL_ENETC is not explicitly enabled in the NXP LS1028A config
files, instead it is selected by CONFIG_MSCC_FELIX_SWITCH, a state of
matters which is fragile.
CONFIG_MSCC_FELIX_SWITCH depends on CONFIG_DM_DSA, which depends on
CONFIG_PHY_FIXED.
Not all LS1028A boards did enable CONFIG_PHY_F
The VSC8502 is a Microchip (formerly Microsemi, formerly Vitesse)
dual port, gigabit Ethernet copper PHY which supports the MII, GMII and
RGMII MAC-side interfaces.
Of these, I could only test RGMII, and my board needed RGMII delays to
be applied by software, so I am able to confirm that this patc
On Mon, Sep 27, 2021 at 05:58:08PM +0300, Oleksandr Suvorov wrote:
> Dear community,
>
> This weekend I tried to post (using patman) a patch set that should
> have been sent to 120 recipients (a lot of files were changed).
>
> I've got an error from the Gmail SMTP server:
> 4.5.3 Your message ha
During the migration to a single DTSI for the CP110-s specific pinctrl
compatibles were moved to the SoC DTSI as CP0 and CP1 have some specifics.
Namely, CP0 eMMC/SDIO support depends on the mvebu-pinctrl driver setting
the BIT(0) in eMMC PHY IO Control 0 Register to 0 in order for the connect
the
On Mon, Sep 27, 2021 at 08:58:17AM -0600, Simon Glass wrote:
> Hi Tom,
>
> This is for the -next branch.
>
> https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/9260
>
>
>
> The following changes since commit bb38d77ca779cc8bdad3d4ceb6cecc687f4987c2:
>
> vexpress_ca9x4: Add miss
Hi,
This is tomorrow. If you plan to join and want to add a topic, please
do so at [1].
Regards,
Simon
[1] https://bit.ly/3bFvwA1
or
https://docs.google.com/document/d/1YBOMsbM19uSFyoJWnt7-PsOLBaevzQUgV-hiR88a5-o/edit#heading=h.flytinyefvov
On Tue, Sep 21, 2021 at 04:19:30PM +0900, Masahisa Kojima wrote:
> This commit adds the UEFI GPT disk partition topology
> measurement required in TCG PC Client PFP Spec.
>
> Signed-off-by: Masahisa Kojima
> ---
>
> (no changes since v1)
>
> include/blk.h | 3 +
> include/efi
Hi Masahiro,
On Mon, 27 Sept 2021 at 10:51, Masahiro Yamada wrote:
>
> On Tue, Sep 28, 2021 at 1:11 AM Alex G. wrote:
> >
> >
> >
> > On 9/25/21 8:43 PM, Simon Glass wrote:
> > > At present we must separately test for the host build for many options,
> > > since we force them to be enabled. For
Hi Alex,
On Mon, 27 Sept 2021 at 10:11, Alex G. wrote:
>
>
>
> On 9/25/21 8:43 PM, Simon Glass wrote:
> > At present we must separately test for the host build for many options,
> > since we force them to be enabled. For example, CONFIG_FIT is always
> > enabled in the host tools, even if CONFIG_
Hi Alex,
On Mon, 27 Sept 2021 at 09:37, Alex G. wrote:
>
> On 9/23/21 9:49 PM, Simon Glass wrote:> On Thu, 16 Sept 2021 at 09:43,
> Alex G. wrote:
> >> On 7/29/21 8:08 PM, Chia-Wei Wang wrote:
>
> >>> +
> >>> +enum HASH_ALGO hash_algo_lookup_by_name(const char *name)
> >>
> >> string -> ha
Hi Ilias,
On Mon, 27 Sept 2021 at 02:52, Ilias Apalodimas
wrote:
>
> Hi Simon,
>
> [...]
>
> > > > > - remove unnecessary const qualifier from smbios_string()
> > > > > - create non-const version of next_header()
> > > > >
> > > > > include/efi_loader.h | 2 +
> > > > > include/efi_tc
On Mon, 27 Sept 2021 at 00:48, Ilias Apalodimas
wrote:
>
> The previous patches removed OF_PRIOR_STAGE from the last consumers of the
> Kconfig option. Cleanup any references to it in documentation, code and
> configuration options.
>
> Signed-off-by: Ilias Apalodimas
> ---
> dts/Kconfig
On Mon, 27 Sept 2021 at 00:48, Ilias Apalodimas
wrote:
>
> At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
> introduced, in order to support a DTB handed over by an earlier stage boo
> loader. However we have another option in the Kconfig (OF_BOARD) which has
> identica
On Mon, 27 Sept 2021 at 09:43, Wolfgang Denk wrote:
>
nit: commit message
> Signed-off-by: Wolfgang Denk
> ---
> Licenses/lgpl-2.0.txt | 2 +-
> Makefile | 4 ++--
> arch/arm/include/asm/arch-am33xx/cpu.h| 2 +-
> arch/arm
Hi Mark,
On Sun, 26 Sept 2021 at 14:53, Mark Kettenis wrote:
>
> > From: Simon Glass
> > Date: Mon, 20 Sep 2021 19:11:25 -0600
>
> Hi Simon,
>
> > [..]
> >
> > > > > +static int apple_dart_bind(struct udevice *dev)
> > > > > +{
> > > > > + void *base;
> > > > > + int sid, i;
> > > >
On Mon, 27 Sept 2021 at 00:48, Ilias Apalodimas
wrote:
>
> At some point back in 2018 prior_stage_fdt_address and OF_PRIOR_STAGE got
> introduced, in order to support a DTB handed over by an earlier stage boo
> loader. However we have another option in the Kconfig (OF_BOARD) which has
> identica
On Thursday 19 August 2021 13:13:06 Loic Poulain wrote:
> This command allows to start CDC ACM function and redirect console
> (stdin, stdout, stderr) to USB (acmconsole start). The console can
> then be accessed through the USB host for debugging purpose. The
> host can stop the session (acmconsol
On Thursday 19 August 2021 13:13:05 Loic Poulain wrote:
> +static void acm_notify_complete(struct usb_ep *ep, struct usb_request *req)
> +{
> + if (req->status)
> + printf("CDC ACM notify failed (%d)\n", req->status);
> +
> + /* nothing to do */
> +}
> +
> +static void acm_tx_co
The macro called MUX_VAL generates a writel instruction with
semicolon at the end. This table was written to use semicolons,
however one was missed:
MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4))/* GPIO_4 */
Since the extra semicolon is unnecessary with the use of the macro,
remove
On Tue, Sep 28, 2021 at 1:11 AM Alex G. wrote:
>
>
>
> On 9/25/21 8:43 PM, Simon Glass wrote:
> > At present we must separately test for the host build for many options,
> > since we force them to be enabled. For example, CONFIG_FIT is always
> > enabled in the host tools, even if CONFIG_FIT is no
Adds check for mclk_ps variable before calculating caslat_actual.
Verified changes on lx2160ardb board.
Signed-off-by: Maninder Singh
---
drivers/ddr/fsl/lc_common_dimm_params.c | 8 ++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/ddr/fsl/lc_common_dimm_params.c
On 9/27/21 11:06 AM, Simon Glass wrote:
Hi Alex,
On Mon, 27 Sept 2021 at 09:53, Alex G. wrote:
Hi Simon
On 9/25/21 8:43 PM, Simon Glass wrote:
At present when building host tools, we force CONFIG_SHAxxx to be enabled
regardless of the board Kconfig setting. This is done in the image.h
he
the words in this document :
https://wiki.riscv.org/plugins/servlet/mobile?contentId=13098230#content/view/13098230
make it very clear when changes are allowed or not and likely or not.
if you think the verbiage is somehow ambiguous please help us make it better.
Mark
sent from a mobi
On 9/25/21 8:43 PM, Simon Glass wrote:
At present we must separately test for the host build for many options,
since we force them to be enabled. For example, CONFIG_FIT is always
enabled in the host tools, even if CONFIG_FIT is not enabled by the
board itself.
It would be more convenient if
Hi Alex,
On Mon, 27 Sept 2021 at 09:53, Alex G. wrote:
>
> Hi Simon
>
> On 9/25/21 8:43 PM, Simon Glass wrote:
> > At present when building host tools, we force CONFIG_SHAxxx to be enabled
> > regardless of the board Kconfig setting. This is done in the image.h
> > header file.
> >
> > For SPL we
Hi Simon
On 9/25/21 8:43 PM, Simon Glass wrote:
At present when building host tools, we force CONFIG_SHAxxx to be enabled
regardless of the board Kconfig setting. This is done in the image.h
header file.
For SPL we currently just assume the algorithm is desired if U-Boot proper
enables it.
Cle
Dear Adam,
In message
you wrote:
> > >
> > > commit 25e4ff45b17 "ARM: omap3_logic: Enable OMAP EHCI support for
> > > SOM-LV Boards" added (among other things) these lines:
> > >
> > > ...
> > > 243 MUX_VAL(CP(MCSPI2_SOMI),(IEN | PTD | DIS | M0));
> > > /*HSUSB2_DATA5*/
>
On Tue, 21 Sep 2021 17:20:17 PDT (-0700), ati...@atishpatra.org wrote:
Hi All,
Please find the below email from Stephano about the freeze announcement for
various RISC-V specifications that will be part of privilege specification
v1.12.
All the review discussions are happening in the isa-dev mail
Signed-off-by: Wolfgang Denk
---
arch/arm/cpu/arm926ejs/cache.c| 1 -
arch/arm/cpu/armv7/psci-common.c | 1 -
arch/arm/cpu/armv8/hisilicon/pinmux.c | 2 --
arch/arm/cpu/armv8/xen/hypercall.S
Signed-off-by: Wolfgang Denk
---
Licenses/lgpl-2.0.txt | 2 +-
Makefile | 4 ++--
arch/arm/include/asm/arch-am33xx/cpu.h| 2 +-
arch/arm/lib/lib1funcs.S | 6 +++---
arch/xtensa/include/asm/arch-de212/cor
Signed-off-by: Wolfgang Denk
---
README| 1 -
arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c | 2 --
arch/xtensa/include/asm/arch-dc232b/core.h| 2 --
arch/xtensa/include/asm/arch-dc232b/tie-asm.h | 4
arch/xtensa/inc
The following is an attempt of a minimal-invasive white space
cleaup. It performs the following actions:
- Remove empty lines at the end of a file
- Remove white space at the end of lines
- Remove excessive empty lines: there is almost never a good reason
to have more than 2 consecutive empty l
On 9/23/21 9:49 PM, Simon Glass wrote:> On Thu, 16 Sept 2021 at 09:43,
Alex G. wrote:
On 7/29/21 8:08 PM, Chia-Wei Wang wrote:
+
+enum HASH_ALGO hash_algo_lookup_by_name(const char *name)
string -> hash_lookup_algo() -> ops struct
Is the current way to do things. hash_algo_lookup_by_
Move this over to the new rST format.
Signed-off-by: Simon Glass
---
(no changes since v1)
doc/{README.distro => develop/distro.rst} | 177 ++
doc/develop/index.rst | 1 +
2 files changed, 80 insertions(+), 98 deletions(-)
rename doc/{README.distro =>
It is pretty strange that the pxe code uses the 'filesize' environment
variable find the size of a file it has just read.
Partly this is because it uses the command-line interpreter to parse its
request to load the file.
As a first step towards unwinding this, return it directly from the
getfile(
The only difference between the three helpers is the filesystem type.
Factor this out and call the filesystem functions directly, instead of
through the command-line interpreter. This allows the file size to be
obtained directly, instead of via an environment variable.
We cannot do the same thing
Add an xtoa() function, similar to itoa() but for hex instead.
Signed-off-by: Simon Glass
---
(no changes since v1)
include/vsprintf.h | 16 ++--
lib/vsprintf.c | 20 ++--
test/print_ut.c| 24
3 files changed, 56 insertions(+), 4 del
Add test and a comment for this function.
Signed-off-by: Simon Glass
---
(no changes since v1)
include/vsprintf.h | 13 -
test/print_ut.c| 17 +
2 files changed, 29 insertions(+), 1 deletion(-)
diff --git a/include/vsprintf.h b/include/vsprintf.h
index 83d187e5
Both the syslinux and pxe commands use essentially the same code to parse
and run extlinux.conf files. Move this into a common function.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/pxe_utils.c| 20
cmd/pxe.c | 15 ---
cmd/sysboot.c
The 'bootfile' environment variable is read in the bowels of pxe_util to
provide a directory to which all loaded files are relative.
This is not obvious from the API to PXE and it is strange to make the
caller set an environment variable rather than pass this as a parameter.
The code is also conv
This function no longer makes sense, since it is pretty easy to prepend
the boot directory to the filename. Drop it and update its only caller.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/pxe_utils.c| 53 +
include/pxe_utils.h | 3
There are a few more blank lines than makes sense for readability. Also
free() handles a NULL pointer so drop the pointless checks.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/pxe_utils.c | 66 ++--
1 file changed, 13 insertions(+), 53
Refactor this code so that we can call the 'pxe get' command without going
through the command-line interpreter. This makes it easier to get the
information we need, without going through environment variables.
Signed-off-by: Simon Glass
---
Changes in v2:
- Rebase to -next
- Split out from the
Move the header file into the main include/ directory so we can use it
from the bootmethod code. Move the C file into boot/ since it relates to
booting.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/Makefile| 3 +++
{cmd => boot}/pxe_utils.c| 0
cmd/Makefile
At present the PXE functions pass around a pointer to command-table entry
which is very strange. It is only needed in a few places and it is odd to
pass around a data structure from another module in this way.
For bootmethod we will need to provide some context information when
reading files.
Cre
Allow the caller to provide some info which is passed back to the
readfile() method.
Signed-off-by: Simon Glass
---
(no changes since v1)
cmd/pxe.c | 4 ++--
cmd/pxe_utils.c | 3 ++-
cmd/pxe_utils.h | 6 +-
cmd/sysboot.c | 2 +-
4 files changed, 10 insertions(+), 5 deletions(-)
di
Some of these functions are a big vague in the comments. Tidy them up a
bit.
Signed-off-by: Simon Glass
---
(no changes since v1)
boot/pxe_utils.c | 189 ++-
1 file changed, 138 insertions(+), 51 deletions(-)
diff --git a/boot/pxe_utils.c b/boot/pxe
Put the function comments in the header file so that the full API can we
examined in one place.
Expand the comments to cover parameters and return values.
Signed-off-by: Simon Glass
---
(no changes since v1)
cmd/pxe_utils.c | 45 -
cmd/pxe_utils.h | 77
Rather than having a global variable, pass the function as part of the
context.
Signed-off-by: Simon Glass
---
(no changes since v1)
cmd/pxe.c | 10 --
cmd/pxe_utils.c | 9 -
cmd/pxe_utils.h | 20 +---
cmd/sysboot.c | 20 ++--
4 files ch
Move this into the context to avoid a global variable. Also rename it
since the current name does not explain what it actually affects.
Signed-off-by: Simon Glass
---
(no changes since v1)
cmd/pxe.c | 6 ++
cmd/pxe_utils.c | 13 +++--
cmd/pxe_utils.h | 8 +---
cmd/sysbo
Quite a lot of the code in common/relates to booting and images. Before
adding more it seems like a good time to move the code into its own
directory.
Most files with 'boot' or 'image' in them are moved, except:
- autoboot.c which relates to U-Boot automatically running a script
- bootstage.c whi
This collects together the patches previously sent relating to PXE.
Firstly, it moves the boot code out of common/ and into a new boot/
directory. This helps to collect these related files in one place, as
common/ is quite large.
Secondly, it provides patache so clean up the PXE code and refactor
On 9/27/21 2:42 PM, Stefan Agner wrote:
There are devices which cause a USB stall when trying to read strings.
Specifically Arduino Mega R3 stalls when trying to read the product
string.
The stall currently remains unhandled, and subsequent retries submit new
transfers on a stopped endpoint whic
On Mon, Sep 27, 2021 at 9:49 AM Tom Rini wrote:
>
> On Mon, Sep 27, 2021 at 04:45:01PM +0200, Wolfgang Denk wrote:
>
> > Dear Adam,
> >
> > commit 25e4ff45b17 "ARM: omap3_logic: Enable OMAP EHCI support for
> > SOM-LV Boards" added (among other things) these lines:
> >
> > ...
> > 243 MUX_
Hi Tom,
This is for the -next branch.
https://source.denx.de/u-boot/custodians/u-boot-dm/-/pipelines/9260
The following changes since commit bb38d77ca779cc8bdad3d4ceb6cecc687f4987c2:
vexpress_ca9x4: Add missing SYS_LOAD_ADDR (2021-09-24 22:12:35 -0400)
are available in the Git repository a
Dear community,
This weekend I tried to post (using patman) a patch set that should
have been sent to 120 recipients (a lot of files were changed).
I've got an error from the Gmail SMTP server:
4.5.3 Your message has too many recipients. For more information regarding
4.5.3 Google's sending limit
On Mon, Sep 27, 2021 at 09:43:01AM -0500, Suman Anna wrote:
> Hi Amjad,
>
> On 9/27/21 7:34 AM, Amjad Ouled-Ameur wrote:
> > This patchset enables the OPP_HIGH configuration for GPU, DSPEVE and IVA
> > voltage domains by default for various TI DRA7xx and AM57xx boards. This
> > is being done to me
On Mon, Sep 27, 2021 at 04:45:01PM +0200, Wolfgang Denk wrote:
> Dear Adam,
>
> commit 25e4ff45b17 "ARM: omap3_logic: Enable OMAP EHCI support for
> SOM-LV Boards" added (among other things) these lines:
>
> ...
> 243 MUX_VAL(CP(MCSPI2_SOMI),(IEN | PTD | DIS | M0));
> /*H
Dear Adam,
commit 25e4ff45b17 "ARM: omap3_logic: Enable OMAP EHCI support for
SOM-LV Boards" added (among other things) these lines:
...
243 MUX_VAL(CP(MCSPI2_SOMI),(IEN | PTD | DIS | M0));
/*HSUSB2_DATA5*/
244 MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0
Hi Amjad,
On 9/27/21 7:34 AM, Amjad Ouled-Ameur wrote:
> This patchset enables the OPP_HIGH configuration for GPU, DSPEVE and IVA
> voltage domains by default for various TI DRA7xx and AM57xx boards. This
> is being done to meet the performance needs of 1080p MultiMedia usecases
>
> Amjad Ouled-A
On Tue, 21 Sept 2021 at 10:17, Masahisa Kojima
wrote:
>
> This commit adds the DeployedMode and AuditMode variable
> measurement required in TCG PC Client PFP Spec.
>
> Signed-off-by: Masahisa Kojima
> ---
>
> (no changes since v1)
>
> lib/efi_loader/efi_tcg2.c | 47 +
Hey all,
It is release day and here is v2021.10-rc5. At this point we're a week
out from the release. I know of the series here:
https://patchwork.ozlabs.org/project/uboot/list/?series=263618&state=*
to restore mtd naming of nor%d to fix a regression within "mtd" for NOR
flashes. I think everyo
On Fri, Sep 24, 2021 at 05:36:31PM -0600, Simon Glass wrote:
> Hi Tom,
>
> On Fri, 24 Sept 2021 at 08:55, Tom Rini wrote:
> >
> > On Fri, Sep 24, 2021 at 08:38:49AM -0600, Simon Glass wrote:
> > > Hi Tom,
> > >
> > > On Fri, 24 Sept 2021 at 08:20, Tom Rini wrote:
> > > >
> > > > On Fri, Sep 24,
On 2021/9/27 20:28, Stefan Agner wrote:
On 2021-09-26 11:12, Jon Lin wrote:
Most NVME devcies maintain data in internal cache for an uncertain
times, and u-boot has no method to force NVME to flush cache.
So this patch adds FUA to avoid data loss caused by power off after data
programming.
Ma
Most NVME devcies maintain data in internal cache for an uncertain
times, and u-boot has no method to force NVME to flush cache.
So this patch adds FUA to avoid data loss caused by power off after data
programming.
Signed-off-by: Jon Lin
Reviewed-by: Stefan Agner
---
(no changes since v1)
dri
Consulting to "NVM Express® Base Specification, revision 2.0".
If more PRP List pages are required, then the last entry of
the PRP List contains the Page Base Address of the next PRP
List page. The next PRP List page shall be memory page aligned.
Signed-off-by: Jon Lin
---
(no changes since v1)
On Mon, Sep 27, 2021 at 12:58:43PM +0200, Stefan Roese wrote:
> Hi Tom,
>
> please pull these 2 Marvell MVEBU related fixes:
>
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: PGP signature
On Sun, Sep 26, 2021 at 07:55:27AM +0200, Heinrich Schuchardt wrote:
> The following changes since commit 8284d6f838684cfa6e3303a447deb38027c5d7f0:
>
> Merge branch '2021-09-24-assorted-minor-updates' (2021-09-24 14:28:54
> -0400)
>
> are available in the Git repository at:
>
> https://sour
There are devices which cause a USB stall when trying to read strings.
Specifically Arduino Mega R3 stalls when trying to read the product
string.
The stall currently remains unhandled, and subsequent retries submit new
transfers on a stopped endpoint which ultimately cause a crash in
abort_td():
Enable the OPP_HIGH configuration for GPU voltage domain
by default for various TI DRA7xx and AM57xx boards. This
is being done to meet the performance needs of 1080p
GFX/MultiMedia usecases. This domain does not support DVFS
and the kernel will continue to run at the boot OPP chosen
here.
Based o
Enable the OPP_HIGH configuration for DSPEVE and IVA voltage
domains by default for various TI DRA7xx and AM57xx boards. This
is being done to meet the performance needs of 1080p MultiMedia
usecases and other DSP usecases. These domains do not support
DVFS and the kernel will continue to run at the
1 - 100 of 137 matches
Mail list logo
