Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> These are mostly specific to a particular SoC. Add the definitions for
> Apollo Lake.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - apollolake -> Apollo Lake
>
> Changes in v3:
> - Add VBT signa
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Adds a driver for the Apollo Lake Primary-to-sideband bus. This supports
> various child devices. It supposed both device tree and of-platdata.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - Detect zero mmi
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add basic plumbing to allow Apollo Lake support to be used.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5:
> - Enable SMP
>
> Changes in v4:
> - Enable HAVE_X86_FIT
> - Enable INTEL_GPIO
> - Switch over to use pinctrl for
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add code to init the system both in TPL and SPL. Each phase has its own
> procedure.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - Switch over to use pinctrl for pad init/config
>
> Changes in v
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add a bare-bones CPU driver so that CPUs can be probed.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5:
> - Add L2 cache flush function
> - Drop SAFETY_MARGIN
>
> Changes in v4:
> - Change apollolake to apl
> - Tidy up hea
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add loaders for SPL and TPL so that the next stage can be loaded from
> memory-mapped SPI or, failing that, the Fast SPI driver.
>
> Signed-off-by: Simon Glass
>
> ---
>
> Changes in v5:
> - Add L2 cache flush functoin
> - Drop SA
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add a driver for the Apollo Lake Platform Controller Hub. It does not have
> any functionality and is just a placeholder for now.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - Tidy up header guards
> - Upd
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add a driver for the Apollo Lake P-unit (power unit). It is modelled as a
> syscon driver since it only needs to be probed.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - Name this P-Unit instead
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> This driver the LPC and provides a few functions to set up LPC features.
driver models?
> These should probably use ioctls() or perhaps, better, have specific
> uclass methods.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in
>-Original Message-
>From: Alex Marginean
>Sent: Thursday, November 14, 2019 7:10 PM
>To: u-boot@lists.denx.de
>Cc: Priyanka Jain ; Sudhanshu Gupta
>; Harninder Rai ;
>Rajesh Bhagat ; Claudiu Manoil
>; Madalin Bucur ;
>Alexandru Marginean
>Subject: [PATCH] configs: ls1028a: enable OF_LI
>-Original Message-
>From: U-Boot On Behalf Of Wen He
>Sent: Thursday, November 14, 2019 12:38 PM
>To: u-boot@lists.denx.de
>Subject: [U-Boot] [v2] armv8: ls1043aqds: modify the qspi_bootcmd definition
>
>Fix the kernel offset of qspi_bootcmd scripts, followed the
>qoriq_memory_layout de
>-Original Message-
>From: Biwen Li
>Sent: Friday, November 15, 2019 12:40 PM
>To: Shengzhou Liu ; Priyanka Jain
>; Alison Wang ; Jagdish
>Gediya ; s...@denx.de; Prabhakar X
>; Rajesh Bhagat
>Cc: Jiafei Pan ; Xiaobo Xie ; u-
>b...@lists.denx.de; Biwen Li
>Subject: [v3] include/configs:
>-Original Message-
>From: Pankaj Bansal
>Sent: Wednesday, November 20, 2019 2:43 PM
>To: Priyanka Jain ; Xiaowei Bao
>; Z.q. Hou
>Cc: u-boot@lists.denx.de; Pankaj Bansal
>Subject: [PATCH] board: fsl: lx2160a: Fix the typo in board_fix_fdt
>
>Fix a typo that caused incorrect reg-name f
>-Original Message-
>From: Alex Marginean
>Sent: Friday, November 22, 2019 3:28 PM
>To: u-boot@lists.denx.de
>Cc: Priyanka Jain
>Subject: [PATCH v2] configs: ls1028a: enable CMD_DM
>
>Since at least some of the drivers relevant to LS1028A are now following DM,
>it's
>useful to have dm
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> This driver models the hostbridge as a northbridge. It simply sets up the
> graphics BAR. It supports of-platdata.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - Avoid needing to know internals o
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> This driver handles communication with the systemagent which needs to be
> told when U-Boot has completed its init.
>
> Signed-off-by: Simon Glass
>
> ---
>
> Changes in v5: None
> Changes in v4:
> - Add a comment for enable_bios_
>-Original Message-
>From: Yuantian Tang
>Sent: Monday, November 4, 2019 12:41 PM
>To: Priyanka Jain
>Cc: u-boot@lists.denx.de; Andy Tang
>Subject: [PATCH v3] armv8: ls1028a: Add environment variables to facilitate the
>boot
>
>Add some environment variables to facilitate the auto boot
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> This driver models some sort of interrupt thingy but there are so many
> abreviations that I cannot find out what it stands for. Possibly something
> to do with interrupts.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Chang
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> For Apollo Lake we need to take the I2C bus controller out of reset before
> using this. Add this functionality to the driver.
>
> Signed-off-by: Simon Glass
> Reviewed-by: Heiko Schocher
> ---
>
> Changes in v5: None
> Changes i
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add a driver for the Apollo Lake pinctrl. This mostly makes use of the
> common Intel pinctrl support.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - Allow pinctrl nodes to have subnodes (i.e. GP
Hello Simon,
Am 30.11.2019 um 05:23 schrieb Simon Glass:
Hi Tom,
I have been meaning to have a crack at setting up a little hardware
lab for a while.
I made some progress recently and hooked up a rpi_3 with sdwire for
USB/SD, ykush for power and a little computer to control it. It builds
U-Boo
Dear Tom,
Please find my pull-request for u-boot-fsl-qoriq/master
https://travis-ci.org/p-priyanka-jain/u-boot/builds/618451045
Summary
fsl-qoriq : Minor bug fixes and updates on lx2160a, ls1028a, ls1012a,
ls1043aqds platforms
priyankajain
---
The
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add a driver for the Apollo Lake UART. It uses the standard ns16550 device
> but also sets up the input clock with LPSS and supports configuration via
> of-platdata.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> C
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add a driver for the Apollo Lake SoC. It supports the basic operations and
> can use device tree or of-platdata.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes in v4:
> - Fix Makefile copyright message
> -
This reverts commit 856b9cdb53f0e6c8d98f81cf71ef363c16b0aa0e.
Commit 856b9cdb53f0 ("powerpc: mpc85xx: delete FSL_SATA for T2080QDS
board.") is to fit support sata DM mode, Now the driver will be reverted,
So revert it.
Signed-off-by: Peng Ma
---
Changed for v2:
- Add detailed explanation
This reverts commit 1ee494291880fd51ef0c5f7342e072bdb069d7ff.
Commit 1ee494291880 ("ata: fsl_ahci: Add sata DM support for Freescale
powerpc socs") introduced SCSI layer to call AHCI private API in order
to support sata operations, In DM mode, This is not necessary for
non-AHCI sata. So revert it
The sata of our powerpc platforms are updated. These changes is to
fit the driver probe.
Signed-off-by: Peng Ma
---
Changed for v2
- Update title.
arch/powerpc/dts/t2080.dtsi | 15 ---
1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/arch/powerpc/dts/t2080.dtsi
The variable(dma_flag) will be used by both fsl_ahci.c and fsl_sata.c,
Now we support the fsl_sata.c to DM mode and revert fsl_ahci.c(This
variable declare here). So we should Add this change.
Signed-off-by: Peng Ma
---
Changed for v2:
- No change.
drivers/ata/fsl_sata.h | 1 +
1 file c
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> This function is specific to qemu so it seems best to keep it separate
> from the generic code.
>
> Move it out to a new file and update the condition to use if() instead of
something is missing after "instead of" :)
>
> Signed-o
This reverts commit 02dc1599ba0b16eb21ba0c206e5b6f38fe7b67a7
Commit 02dc1599ba0b ("configs: enable sata, eSDHC, USB device module in
T2080QDS") has some sata defconfig changes to fit support DM mode, Now
the driver will be reverted, So revert it.
Signed-off-by: Peng Ma
---
Changed for v2:
Hi Simon,
On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
>
> Add a GPIO driver which uses the pinctrl driver to access the pad
> information. This driver relies on the GPIO nodes being subnodes to the
> pinctrl device.
>
> Signed-off-by: Simon Glass
> ---
>
> Changes in v5: None
> Changes i
Hi Jagon
> From: Jagan Teki [mailto:ja...@amarulasolutions.com]
> Sent: Monday, November 18, 2019 7:30 PM
> To: Rick Jian-Zhi Chen(陳建志)
> Cc: u-boot@lists.denx.de; Jagan Teki
> Subject: [PATCH v4 2/2] sifive: fu540: Enable OF_SEPARATE
>
> Use dts support from U-Boot via OF_SEPARATE instead of depe
Hi Huge Cole-Baker,
On 2019/12/1 下午10:12, Hugh Cole-Baker wrote:
Hi Vasily,
On 29 Nov 2019, at 01:06, Vasily Khoruzhick wrote:
On Thu, Nov 28, 2019 at 4:59 PM Kever Yang wrote:
Hi Vasily,
On 2019/11/28 下午11:51, Vasily Khoruzhick wrote:
On Thu, Nov 28, 2019 at 1:23 AM Kever Yang wrote:
HI BIn,
On Sun, 1 Dec 2019 at 18:47, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Nov 25, 2019 at 9:52 PM Bin Meng wrote:
> >
> > With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"),
> > SiFive Unleashed board does not boot any more. This was due to
> > the U-Boot local changes commit 77
Buildman doesn't store this file in the same directory as a normal build.
Update the conftest code to handle both cases.
Signed-off-by: Simon Glass
---
test/py/conftest.py | 39 +++
1 file changed, 27 insertions(+), 12 deletions(-)
diff --git a/test/py/conft
At present the pinctrl nodes are not enabled in pre-relocation U-Boot so
the UARTs do not correctly select the pinconfig to enable the UART pins.
Fix this so that the U-Boot banner is printed.
Signed-off-by: Simon Glass
Fixes: 9821636b64 (bcm2835_pinctrl: Probe pre-reloc)
---
arch/arm/dts/bcm28
Hi Simon,
On Mon, Nov 25, 2019 at 9:52 PM Bin Meng wrote:
>
> With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"),
> SiFive Unleashed board does not boot any more. This was due to
> the U-Boot local changes commit 77d7fff8cec2 ("fdt: Fix handling
> of paths with options in them") to li
Hi Joe,
On Wed, Nov 20, 2019 at 5:54 AM Joe Hershberger wrote:
>
> On Sat, Nov 16, 2019 at 12:20 AM Bin Meng wrote:
> >
> > During testing of qemu-riscv32 with a 2GiB memory configuration,
> > tftp always fails with a error message:
> >
> > Load address: 0x8400
> > Loading: #
> > TFTP
On Thu, Nov 28, 2019 at 04:49:50PM +0200, Ilias Apalodimas wrote:
> On Thu, Nov 28, 2019 at 04:21:01PM +0200, Ilias Apalodimas wrote:
> > Akashi-san,
> >
> > On Tue, Nov 26, 2019 at 09:51:08AM +0900, AKASHI Takahiro wrote:
> > > efi_signature_parse_sigdb() is a helper function will be used to pars
Hi Bin,
On Thu, 28 Nov 2019 at 22:49, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> >
> > This subsystem is present on various Intel SoCs.
> >
> > Add very basic support for taking an lpss device out of reset.
> >
> > Signed-off-by: Simon Glass
> >
> >
Hi Bin,
On Fri, 29 Nov 2019 at 00:17, Bin Meng wrote:
>
> Hi Simon,
>
> On Mon, Nov 25, 2019 at 12:12 PM Simon Glass wrote:
> >
> > Recent Intel SoCs share a pinctrl mechanism with many common elements. Add
> > an implementation of this core functionality, allowing SoC-specific
> > drivers to av
On 12/1/19 10:13 PM, Lukasz Majewski wrote:
> Hi Marek,
Hi,
>> On 11/30/19 12:25 AM, Lukasz Majewski wrote:
>>> Dear Marek,
>>
>> Hi,
>>
>>> The following changes since commit
>>> dbcbdad92caf4b42a6279da6e65180532bc45620:
>>>
>>> sandbox: enable USB_KEYBOARD_FN_KEYS (2019-11-25 13:28:53 +0100
Hi Marek,
> On 11/30/19 12:25 AM, Lukasz Majewski wrote:
> > Dear Marek,
>
> Hi,
>
> > The following changes since commit
> > dbcbdad92caf4b42a6279da6e65180532bc45620:
> >
> > sandbox: enable USB_KEYBOARD_FN_KEYS (2019-11-25 13:28:53 +0100)
> >
> > are available in the Git repository at:
>
jérémy alcim schrieb am Fr., 29. Nov. 2019, 08:32:
> Hi, i think i have find the problem, but i think i doesn't have the
> experience for modifie that.
> on the file : drivers/fpga/ socfpga_gen5.c : line 161 : function
> :
>
>1. we wait fot the return of the fonction with the
>value or
PCI devices may be disabled in the device tree. Devices which are probed
by the device tree handle the "status" property and are skipped if
disabled. Devices which are probed by the PCI enumeration don't check
that property. Fix it.
Signed-off-by: Michael Walle
---
drivers/pci/pci-uclass.c | 5 +
Am 2019-12-01 01:55, schrieb Alexandru Marginean:
Hi Michael,
On 10/22/2019 1:03 AM, Michael Walle wrote:
device_probe() may fail in which case the seq_id will be -1. Don't
display these devices during startup. While this is only a cosmetic
change, the return value of eth_initialize() will also
Hi Vasily,
> On 29 Nov 2019, at 01:06, Vasily Khoruzhick wrote:
>
> On Thu, Nov 28, 2019 at 4:59 PM Kever Yang wrote:
>>
>> Hi Vasily,
>>
>> On 2019/11/28 下午11:51, Vasily Khoruzhick wrote:
>>> On Thu, Nov 28, 2019 at 1:23 AM Kever Yang
>>> wrote:
Hi Vasily,
I think this
On 2019/11/26 上午9:39, David Wu wrote:
Add the glue code to allow the rk3308 variant of the Rockchip gmac
to provide network functionality.
Signed-off-by: David Wu
Reviewed-by: Kever Yang
Thanks,
- Kever
---
drivers/net/gmac_rockchip.c | 65 +
1 file c
On 2019/11/26 下午9:15, Andy Yan wrote:
We need load some parts of ATF to sram, but rockchip
dwmmc controllers can't do dma to non-ddr addresses
space, so set the mmc controller into fifo mode in spl.
Signed-off-by: Andy Yan
Reviewed-by: Kever Yang
Thanks,
- Kever
---
arch/arm/dts/rk3368-
On 2019/11/26 下午9:15, Andy Yan wrote:
PX5 evb has no ETH port, so disable it.
Signed-off-by: Andy Yan
Reviewed-by: Kever Yang
Thanks,
- Kever
---
configs/evb-px5_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configs/evb-px5_defconfig b/configs/evb-px5_de
On 2019/11/26 下午9:15, Andy Yan wrote:
After commit d8765e2422cd ("Enable building of u-boot.itb
on Rockchip platform"), u-boot.itb will automatically
generated by "make all" command, manually command
"make u-boot.itb" is no longer needed.
Signed-off-by: Andy Yan
Reviewed-by: Kever Yang
Than
On 2019/11/26 下午9:15, Andy Yan wrote:
We need load some parts of ATF to sram, but rockchip
dwmmc controllers can't do dma to non-ddr addresses
space, so set the mmc controller into fifo mode in spl.
And show my best respect to Heiko's work for this solution.
Signed-off-by: Andy Yan
Reviewed-
On 2019/11/28 下午2:14, Vasily Khoruzhick wrote:
Rockpro64 doesn't boot reliably after soft reset, so let's force power on
reset by asserting sysreset pin if we detected soft reset.
Signed-off-by: Vasily Khoruzhick
Reviewed-by: Kever Yang
Thanks,
- Kever
---
arch/arm/dts/rk3399-rockpro64-u
On 2019/11/29 下午11:40, Heiko Stuebner wrote:
From: Heiko Stuebner
serial# is one of the vendor properties and thus protected from being
overwritten if already set. If env_set is called anyway this result in
some nasty warnings, so check for presence before trying that.
In the same direction c
On 2019/11/28 下午10:27, Paul Kocialkowski wrote:
UART3 also has two sets of pins that can be selected.
Rename the config option to a common name, to allow it to be used for both
UART2 and UART3.
Signed-off-by: Paul Kocialkowski
Reviewed-by: Kever Yang
Thanks,
- Kever
---
arch/arm/mach-ro
On 2019/11/29 下午11:40, Heiko Stuebner wrote:
From: Heiko Stuebner
rockchip_setup_macaddr() runs from an initcall, so returning an error
code will make that initcall fail thus breaking the boot process.
And if an ethernet address is already set this is definitly not a
cause for that, so just r
add support for i2c eeprom and add parsing "Rescue"
or "DefEnv" at offset 0x1ff0.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 64 ++-
1 file changed, 63 insertions(+), 1 deletion(-)
diff --git a/board/aristainetos/aristainetos.c
b/board/ar
sync defaut Envoronment with customer changes.
Unfortunately they are not changeable, as already
board is in production mode.
Get rid of the big bootcommand and set bootcommand
through Kconfig option.
Signed-off-by: Heiko Schocher
---
configs/aristainetos2_defconfig | 2 +
include/configs/ar
enable config symbols:
CONFIG_SYSRESET
CONFIG_SYSRESET_WATCHDOG
Signed-off-by: Heiko Schocher
---
configs/aristainetos2_defconfig | 2 ++
1 file changed, 2 insertions(+)
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index 82fe512098..be5cec96fa 100644
--- a/con
Add device trees from Linux in preparation for driver model
conversions.
device tree files taken from Linux:
71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest"
and added SPDX license identifier.
Signed-off-by: Heiko Schoche
add stop autobooting via SHA256 encrypted password.
Signed-off-by: Heiko Schocher
---
configs/aristainetos2_defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index c7416a936a..11b9f2ab1d 100644
--- a/configs/arista
add support for revision C boards. This board has
no longer a NAND.
Signed-off-by: Heiko Schocher
---
arch/arm/dts/Makefile | 2 +
.../dts/imx6dl-aristainetos2c_4-u-boot.dtsi | 13 +
arch/arm/dts/imx6dl-aristainetos2c_4.dts | 50
.../dts/imx6dl-aristainet
enable IMX_HAB on aristianetos board
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos2.cfg | 3 ++
configs/aristainetos2_defconfig | 4 +++
include/configs/aristainetos2.h | 51
3 files changed, 58 insertions(+)
diff --git a/board/arist
remove aristainetos-v2.c file, as we now want to
switch to DM/DTS support and have all board specific
code in one file. Goal is to setup differences
through DT.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos-v2.c | 686 --
board/aristainetos/aristaine
enable DM_I2C in defconfig and remove i2c specific
board code.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 73 ---
configs/aristainetos2_defconfig | 6 ++-
include/configs/aristainetos2.h | 11 -
3 files changed, 5 insertions(+), 85
on the aristainetos there are some jumpers for
changing behaviour setting up Environment. Clean
this up.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 43 +--
1 file changed, 30 insertions(+), 13 deletions(-)
diff --git a/board/aristainetos/a
gigabit support does not work on the aristainetos
board, so disable it.
Signed-off-by: Heiko Schocher
---
include/configs/aristainetos-common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/aristainetos-common.h
b/include/configs/aristainetos-common.h
index ab14a1a392..9a
add aristainetso board version CSL.
Signed-off-by: Heiko Schocher
---
arch/arm/dts/Makefile | 2 +
.../imx6dl-aristainetos2b_csl_4-u-boot.dtsi | 13 +
arch/arm/dts/imx6dl-aristainetos2b_csl_4.dts | 50
.../imx6dl-aristainetos2b_csl_7-u-boot.dtsi | 19 ++
a
readd aristainetos 2b board.
Signed-off-by: Heiko Schocher
---
arch/arm/dts/Makefile | 2 +
.../dts/imx6dl-aristainetos2b_4-u-boot.dtsi | 13 +
arch/arm/dts/imx6dl-aristainetos2b_4.dts | 50
.../dts/imx6dl-aristainetos2b_7-u-boot.dtsi | 19 ++
arch/arm
add VERSION_VARIABLE
Signed-off-by: Heiko Schocher
---
configs/aristainetos2_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index 11b9f2ab1d..82fe512098 100644
--- a/configs/aristainetos2_defconfig
+++ b/configs/ar
use DM_PWM and DM_BLACKLIGHT support and remove
board code.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 10 --
configs/aristainetos2_defconfig | 1 +
2 files changed, 1 insertion(+), 10 deletions(-)
diff --git a/board/aristainetos/aristainetos.c
b/board/ar
CONFIG_BOARDNAME is not longer needed, as we use
the model information from DTS.
Signed-off-by: Heiko Schocher
---
board/aristainetos/Kconfig| 3 ---
board/aristainetos/aristainetos.c | 6 --
board/aristainetos/common/Kconfig | 5 -
3 files changed, 14 deletions(-)
diff --git a
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB
in defconfig.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 35 ---
configs/aristainetos2_defconfig | 4
include/configs/aristainetos2.h | 3 ---
3 files changed, 4 insertions(+
add DM_SERIAL support for the aristainetos board, and
remove not used code from board code.
remove CONSOLE_OVERWRITE_ROUTINE.
Signed-off-by: Heiko Schocher
---
arch/arm/mach-imx/mx6/Kconfig | 2 ++
board/aristainetos/aristainetos.c | 60 ---
configs/aristaineto
Enable DM_GPIO, GPIO_HOG, LED and LED_GPIO as gpio
and LEDs are now defined in DTS. Enable also here
the pinctrl driver, so pinmux setup is also done.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 134 --
configs/aristainetos2_defconfig |
enable DM_ETH and remove unneeded board code.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 35 +--
configs/aristainetos2_defconfig | 2 ++
2 files changed, 3 insertions(+), 34 deletions(-)
diff --git a/board/aristainetos/aristainetos.c
b
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH
and get rid of build removal warnings.
define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer
needed, so remove it from config_whitelist.txt
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 97 ---
configs
as we switch to support DM and DTS, rework the existing
DTS trees. Change also Linux specific Device trees, goal
is to push this changes to linux.
Collect U-Boot specific changes in separate "*u-boot*" dts
files.
Signed-off-by: Heiko Schocher
---
.../dts/imx6dl-aristainetos2_4-u-boot.dtsi|
remove 2b version of aristainetos board, as it
is easier to make the DM / DTS port and introduce
the 2b board version again (also some more board
version).
Signed-off-by: Heiko Schocher
---
arch/arm/mach-imx/mx6/Kconfig | 8
board/aristainetos/Kconfig| 18 -
board/aris
add DM_VIDEO support and remove now unneeded board
code. As we show a bmp logo on boot, call now
bmp_display() from board code and do not use
cfb_console anymore.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 111 --
configs/aristainetos2_defc
Enable DM_MMC support.
Signed-off-by: Heiko Schocher
---
board/aristainetos/aristainetos.c | 53 ---
configs/aristainetos2_defconfig | 1 +
include/configs/aristainetos2.h | 2 +-
3 files changed, 2 insertions(+), 54 deletions(-)
diff --git a/board/aristaineto
move defines, which are already moved to Kconfig
out of board config.
Signed-off-by: Heiko Schocher
---
arch/arm/mach-imx/mx6/Kconfig | 9 +++
board/aristainetos/Kconfig| 15 ++-
board/aristainetos/common/Kconfig | 38 +++
configs/ari
add thumb build to aristainetos build to save
binary space.
Signed-off-by: Heiko Schocher
---
configs/aristainetos2_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/aristainetos2_defconfig b/configs/aristainetos2_defconfig
index 48e58e5be2..4434d92e74 100644
--- a/configs/a
convert this driver to support DM.
Signed-off-by: Heiko Schocher
---
drivers/video/lg4573.c | 175 +---
include/configs/aristainetos2.h | 2 -
scripts/config_whitelist.txt| 2 -
3 files changed, 136 insertions(+), 43 deletions(-)
diff --git a/driver
remove not anymore used aristainetos board.
Signed-off-by: Heiko Schocher
---
arch/arm/mach-imx/mx6/Kconfig| 3 -
board/aristainetos/Kconfig | 10 -
board/aristainetos/MAINTAINERS | 2 -
board/aristainetos/aristainetos-v1.c | 278 ---
board/
This series converts the aristainetos to DM / DTS support and get
rid of the compile warnings:
= WARNING ==
This board does not use CONFIG_DM. CONFIG_DM will be
compulsory starting with the v2020.01 release.
Failure to update may result in board removal.
See
86 matches
Mail list logo
