> -Original Message-
> From: Jagan Teki
> Sent: Tuesday, July 16, 2019 5:25 PM
> To: Ashish Kumar
> Cc: U-Boot-Denx
> Subject: [EXT] Re: [PATCH] drivers: mtd :spi: Enable 4B opcodes for SPANSION
> s25fl512s
>
> Caution: EXT Email
>
> On Thu, Jun 27, 2019 at 5:10 PM Ashish Kumar
> wr
s25fs512s and s25fl512s which has same JEDEC ID but only varies
in operating volatge so s25fs512s shares same command set as
mentioned below:
– Serial Command subset and footprint compatible with
S25FL-A, S25FL-K, S25FL-P, and S25FL-S SPI families
– Multi I/O Command subset and footprint compatible
mt35xu512g and mt35xu02g suports Single I/O and OCTAL I/O
also enable use of SPI_NOR_4B_OPCODES.
These flashes are tested on LX2160ARDB and LS1028ARDB respectively
Signed-off-by: Kuldeep Singh
Signed-off-by: Ashish Kumar
---
v3:
1. Add version info, rebase to top
v2:
1. Adding more description
mt25qu512a is rebranded after its spinoff from STM, so it is
different only in term of extended jedec ID, initial JEDEC id
is same as that of n25q512a.In order to avoid any confussion
with respect to name new entry is added.
This flash is tested for Single I/O mode on LS1046FRWY although
it also s
On Thu, Jul 4, 2019 at 1:46 AM Joshua Watt wrote:
>
> Converts qemu x86 machines to boot using distro_config. The intent is to
> allow u-boot in qemu to be maximally compatible with many boot methods
> without having to change the config. Previously, u-boot would only boot
> in a very limited set
Hi Jun,
Le mar. 16 juil. 2019 à 09:48, Jun Nie a écrit :
> Support distro boot for pico imx7d in FIT image case.
>
> Signed-off-by: Jun Nie
> ---
> include/configs/pico-imx7d.h | 37 +++--
> 1 file changed, 11 insertions(+), 26 deletions(-)
>
> diff --git a/incl
On Wed, Jul 17, 2019 at 10:46 AM Jagan Teki wrote:
>
> On Wed, Jul 17, 2019 at 10:00 AM Anup Patel wrote:
> >
> > On Wed, Jul 17, 2019 at 9:38 AM Jagan Teki
> > wrote:
> > >
> > > On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
> > > >
> > > > This patchset adds:
> > > > 1. SiFive SPI driver
On Wed, Jul 17, 2019 at 9:40 AM Jagan Teki wrote:
>
> Hi Peng,
>
> On Wed, Jul 17, 2019 at 9:34 AM Jagan Teki wrote:
> >
> > On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
> > >
> > > Most DM based SPI host controller drivers use SPI_XFER_BEGIN and
> > > SPI_XFER_END flags to enable/disable s
On Wed, Jul 17, 2019 at 9:53 AM Anup Patel wrote:
>
> From: Bhargav Shah
>
> This patch adds SiFive SPI driver. The driver is 100% DM driver
> and it determines input clock using clk framework.
>
> The SiFive SPI block is found on SiFive FU540 SOC and is used to
> access flash and MMC devices on
On Wed, Jul 17, 2019 at 10:00 AM Anup Patel wrote:
>
> On Wed, Jul 17, 2019 at 9:38 AM Jagan Teki wrote:
> >
> > On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
> > >
> > > This patchset adds:
> > > 1. SiFive SPI driver
> > > 2. New MMC SPI driver based on DM_MMC and DM_SPI
> > > 3. Enables Si
Hi Heinrich,
On Wed, Jul 17, 2019 at 2:03 AM Heinrich Schuchardt wrote:
>
> On 7/16/19 6:42 PM, Bin Meng wrote:
> > This extracts Intel Crown Bay board specific information from
> > README.x86, converts plain text documentation to reST format and
> > adds it to Sphinx TOC tree. No essential conte
recently added gpio hog patch was "in discussion"
state with Simon Glass. This patch now adds most
of comments from Simon Glass.
Signed-off-by: Heiko Schocher
---
clean travis build, see result:
https://travis-ci.org/hsdenx/u-boot-test/builds/558774593
Based on mainline:
6070ef409c - Merge bran
Slim Bootloader provides TSC clock information in its performance
info hob. For now, TSC clock information is only used for timer driver
from the performance info hob.
- Get TSC frequency from performance info hob
- Set tsc_base and clock_rate for timer driver
Signed-off-by: Aiden Park
Reviewed-b
Add a new device tree which has very minimum nodes
- x86 reset
- x86 tsc_timer
- x86 pci
- Slim Bootloader serial
Signed-off-by: Aiden Park
Reviewed-by: Bin Meng
---
Changes in v3:
* Move slimbootloader.dtb before baytrail_som-db5800-som-6867.dtb
arch/x86/dts/Makefile | 1 +
arch
The setting up MTRRs have already been done in previous
Slim Bootloader stages.
Signed-off-by: Aiden Park
Reviewed-by: Bin Meng
---
arch/x86/lib/init_helpers.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c
index 0
Add slimbootloader board to run U-boot as a Slim Bootloader payload
- Add new board/intel/slimbootloader directory with minimum codes
- Add slimbootloader configuration files
- Add README in board/intel/slimbootloader
Signed-off-by: Aiden Park
Reviewed-by: Bin Meng
---
Changes in v5:
* Remove
Slim Bootloader provides memory map info thru its HOB list pointer.
Configure memory size and relocation memory from the HOB data, and
provide e820 entries as well.
- Get memory size from the memory map info hob
- Set ram top for U-Boot relocation lower than 4GB
- Provide e820 entries from the memo
Slim Bootloader provides serial port info thru its HOB list pointer.
All these HOBs are eligible for Slim Bootloader based board only.
- Get serial port information from the serial port info hob
- Leverage ns16550 driver with slimbootloader specific platform data
Signed-off-by: Aiden Park
Reviewe
This slimbootloader cpu type is to enable U-Boot as a payload which
runs on top of Slim Bootloader(https://github.com/slimbootloader).
The Slim Bootloader is designed with multi-stage architecture for
the execution from reset vector to OS booting, and supports qemu,
Apollolake, Whiskeylake and Coff
FSP(CONFIG_HAVE_FSP) and Slim Bootloader(CONFIG_SYS_SLIMBOOTLOADER)
consume HOB data from the each HOB list pointer.
Add a common hob library/header in lib/hob.c and include/asm/hob.h.
Signed-off-by: Aiden Park
Reviewed-by: Bin Meng
---
Changes in v3:
* Create a common HOB libary from fsp_hob
This patch is to enable U-Boot as a payload which runs on top of Slim
Bootloader(https://github.com/slimbootloader/slimbootloader) boot firmware for
x86 platforms.
The Slim Bootloader is designed with multi-stage architecture for the execution
from reset vector to OS hand-off, and supports qemu
On 17/07/19 12:59 AM, Simon Goldschmidt wrote:
> This adds separate kconfig options for drivers/sysreset and
> drivers/firmware.
>
> Up to now, CONFIG_SPL_DRIVERS_MISC_SUPPORT added drivers/misc to SPL
> build but also added drivers/firmware and drivers/sysreset at the same
> time.
>
> Since th
On Wed, Jul 17, 2019 at 9:38 AM Jagan Teki wrote:
>
> On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
> >
> > This patchset adds:
> > 1. SiFive SPI driver
> > 2. New MMC SPI driver based on DM_MMC and DM_SPI
> > 3. Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed board
> >
> >
From: Bhargav Shah
This patch enables SiFive SPI and MMC SPI drivers for the
SiFive Unleashed board.
Signed-off-by: Bhargav Shah
Signed-off-by: Anup Patel
Reviewed-by: Bin Meng
Tested-by: Bin Meng
Reviewed-by: Jagan Teki
---
board/sifive/fu540/Kconfig | 6 ++
1 file changed, 6 insertio
This patch removes SiFive SPI driver and MMC SPI drive from the TODO
list in SiFive FU540 README.
Signed-off-by: Anup Patel
Reviewed-by: Bin Meng
Tested-by: Bin Meng
Reviewed-by: Jagan Teki
---
doc/README.sifive-fu540 | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/doc/
From: Bhargav Shah
This patch adds SiFive SPI driver. The driver is 100% DM driver
and it determines input clock using clk framework.
The SiFive SPI block is found on SiFive FU540 SOC and is used to
access flash and MMC devices on SiFive Unleashed board.
This driver implementation is inspired f
Most DM based SPI host controller drivers use SPI_XFER_BEGIN and
SPI_XFER_END flags to enable/disable slave chip select.
This patch extends MMC SPI driver to pass SPI_XFER_BEGIN flag when
MMC command is send at start and pass SPI_XFER_END flag using a
dummy transfer (of bitlen = 0) at the end of M
This patchset adds:
1. SiFive SPI driver
2. New MMC SPI driver based on DM_MMC and DM_SPI
3. Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed board
With this patch series, we can now load files from SD card on SiFive
Unleashed board. Many thanks to Bhargav for porting SiFive SPI d
Hi Peng,
On Wed, Jul 17, 2019 at 9:34 AM Jagan Teki wrote:
>
> On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
> >
> > Most DM based SPI host controller drivers use SPI_XFER_BEGIN and
> > SPI_XFER_END flags to enable/disable slave chip select.
> >
> > This patch extends MMC SPI driver to pass
On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
>
> This patchset adds:
> 1. SiFive SPI driver
> 2. New MMC SPI driver based on DM_MMC and DM_SPI
> 3. Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed board
>
> With this patch series, we can now load files from SD card on SiFive
On Wed, Jul 17, 2019 at 9:31 AM Jagan Teki wrote:
>
> On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
> >
> > From: Bhargav Shah
> >
> > This patch adds SiFive SPI driver. The driver is 100% DM driver
> > and it determines input clock using clk framework.
> >
> > The SiFive SPI block is found
On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
>
> From: Bhargav Shah
>
> This patch enables SiFive SPI and MMC SPI drivers for the
> SiFive Unleashed board.
>
> Signed-off-by: Bhargav Shah
> Signed-off-by: Anup Patel
> Reviewed-by: Bin Meng
> Tested-by: Bin Meng
> ---
Reviewed-by: Jagan
On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
>
> Most DM based SPI host controller drivers use SPI_XFER_BEGIN and
> SPI_XFER_END flags to enable/disable slave chip select.
>
> This patch extends MMC SPI driver to pass SPI_XFER_BEGIN flag when
> MMC command is send at start and pass SPI_XFER_E
On Wed, Jul 17, 2019 at 9:20 AM Anup Patel wrote:
>
> From: Bhargav Shah
>
> This patch adds SiFive SPI driver. The driver is 100% DM driver
> and it determines input clock using clk framework.
>
> The SiFive SPI block is found on SiFive FU540 SOC and is used to
> access flash and MMC devices on
From: Bhargav Shah
This patch enables SiFive SPI and MMC SPI drivers for the
SiFive Unleashed board.
Signed-off-by: Bhargav Shah
Signed-off-by: Anup Patel
Reviewed-by: Bin Meng
Tested-by: Bin Meng
---
board/sifive/fu540/Kconfig | 6 ++
1 file changed, 6 insertions(+)
diff --git a/board
This patch removes SiFive SPI driver and MMC SPI drive from the TODO
list in SiFive FU540 README.
Signed-off-by: Anup Patel
Reviewed-by: Bin Meng
Tested-by: Bin Meng
---
doc/README.sifive-fu540 | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/doc/README.sifive-fu540 b/doc
From: Bhargav Shah
This patch adds SiFive SPI driver. The driver is 100% DM driver
and it determines input clock using clk framework.
The SiFive SPI block is found on SiFive FU540 SOC and is used to
access flash and MMC devices on SiFive Unleashed board.
This driver implementation is inspired f
This patchset adds:
1. SiFive SPI driver
2. New MMC SPI driver based on DM_MMC and DM_SPI
3. Enables SiFive SPI driver and MMC SPI driver for SiFive Unleashed board
With this patch series, we can now load files from SD card on SiFive
Unleashed board. Many thanks to Bhargav for porting SiFive SPI d
Most DM based SPI host controller drivers use SPI_XFER_BEGIN and
SPI_XFER_END flags to enable/disable slave chip select.
This patch extends MMC SPI driver to pass SPI_XFER_BEGIN flag when
MMC command is send at start and pass SPI_XFER_END flag using a
dummy transfer (of bitlen = 0) at the end of M
Hello,
On Thu, 4 Jul 2019 at 01:35, Joel Stanley wrote:
>
> Tom suggested I add support for booting the ASPEED EVB configuration in
> Qemu. This series fixes up a few things with the defconfig so buildman
> passes, and makes u-boot testable:
>
> https://travis-ci.com/shenki/u-boot/builds/1177728
On Sun, Jul 14, 2019 at 8:47 PM Heinrich Schuchardt wrote:
>
> Add more C files as sources to the Sphinx generated documentaton
> (make htmldocs).
>
> Signed-off-by: Heinrich Schuchardt
> ---
> doc/efi.rst | 87 +++--
> 1 file changed, 85 insertion
On Wed, Jul 17, 2019 at 7:36 AM Heinrich Schuchardt wrote:
>
> When testing qemu-riscv64_defconfig on Travis CI I got a QEMU erorr
> "Parameter 'id' is missing".
>
> A command launching qemu-riscv64_defconfig successfully on Debian is:
>
> qemu-system-riscv64 \
> -machine virt \
> -kernel u-boot \
Hi Heinrich,
On Wed, Jul 17, 2019 at 7:43 AM Heinrich Schuchardt wrote:
>
> On 7/16/19 8:03 PM, Heinrich Schuchardt wrote:
> > On 7/16/19 6:42 PM, Bin Meng wrote:
> >> Currently the Sphinx doc only contains API descriptions of several
> >> U-Boot subsystems. For future extension, group these exis
Hi Chris:
On 7/17/19 3:52 AM, Chris Webb wrote:
make_fit_aft.py depends on the non-standard library pyelftools to pull
out PT_LOAD segments from ELF files. However, this is as easy to do
manually, without imposing the extra dependency on users.
Structures in the ELF file are unpacked into varia
On 7/16/19 8:03 PM, Heinrich Schuchardt wrote:
On 7/16/19 6:42 PM, Bin Meng wrote:
Currently the Sphinx doc only contains API descriptions of several
U-Boot subsystems. For future extension, group these existing docs
into an API sub-directory.
Signed-off-by: Bin Meng
Reviewed-by: Heinrich Sc
When testing qemu-riscv64_defconfig on Travis CI I got a QEMU erorr
"Parameter 'id' is missing".
A command launching qemu-riscv64_defconfig successfully on Debian is:
qemu-system-riscv64 \
-machine virt \
-kernel u-boot \
-m 1G -nographic -netdev user,id=net0,tftp=$tftpdir \
-device virtio-net-de
When building with GCC 9.1 an error occurs:
disk/part_efi.c: In function ‘gpt_verify_partitions’:
disk/part_efi.c:737:49: error: taking address of packed member of
‘struct _gpt_entry’ may result in an unaligned pointer value
[-Werror=address-of-packed-member]
737 | gpt_convert_efi_name_to_char
This implements a stack usage check in SPL.
Many boards start up SPL to run code + data from one common, rather small
SRAM. To implement a sophisticated SPL binary size limit on such boards,
the stack size (as well as malloc size and global data size) must be
subtracted from this SRAM size.
Howev
make_fit_atf.py no longer requires pyelftools, and nothing else in the
rockchip build requires it either, so remove references to installing it
from the documentation.
Signed-off-by: Chris Webb
---
board/rockchip/evb_rk3399/README | 6 --
doc/README.rockchip | 4
2 files ch
make_fit_aft.py depends on the non-standard library pyelftools to pull
out PT_LOAD segments from ELF files. However, this is as easy to do
manually, without imposing the extra dependency on users.
Structures in the ELF file are unpacked into variables named to exactly
match the ELF spec to ensure
Building for rockchip, make_fit_atf.py depends on pyelftools, a non-bundled
python module that is not used elsewhere in building u-boot or the kernel.
We only use pyelftools to pull out PT_LOAD segments. ELF is very simple, so
doing this manually is easy and spares users the extra dependency. In f
This adds separate kconfig options for drivers/sysreset and
drivers/firmware.
Up to now, CONFIG_SPL_DRIVERS_MISC_SUPPORT added drivers/misc to SPL
build but also added drivers/firmware and drivers/sysreset at the same
time.
Since that is confusing, this patch uses CONFIG_SPL_SYSRESET for
drivers/
Hi Tom,
Can you please merge this patch
https://patchwork.ozlabs.org/patch/1132255/
which fixes the pcie_ep dm test that failed in travis ?
you can later re-enable the test of course.
Thanks and sorry for the mess..
Ramon.
___
U-Boot mailing list
U-Boot@
macb.h provides macros for reading/setting bitfields,
in macb registers and descriptors. use that instead
of redefining them in the source file.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 48
DMA configuration was heavily dependent on the HW
defaults, add function to properly set the required
fields, including the new dma_burst_length.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 28 +++
add support for clock rates higher than 2.4Mhz
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 6 +-
drivers/net/macb.h | 2 ++
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/ne
GEM support higher DMA burst writes/reads than the default (4).
add configuration structure with dma burst length so it could be
applied later to DMA configuration.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/
This patch adds support for the sgmii phy interface,
available only to DM users, dictated by current driver
design.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 7 +++
1 file changed, 7 insertions(
This patch adds support for the sgmii phy interface,
available only to DM users, dictated by current driver
design.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 7 +++
1 file changed, 7 insertions(
GEM support higher DMA burst writes/reads than the default (4).
add configuration structure with dma burst length so it could be
applied later to DMA configuration.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/
macb.h provides macros for reading/setting bitfields,
in macb registers and descriptors. use that instead
of redefining them in the source file.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 48
DMA configuration was heavily dependent on the HW
defaults, add function to properly set the required
fields, including the new dma_burst_length.
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 28 +++
add support for clock rates higher than 2.4Mhz
Signed-off-by: Ramon Fried
Reviewed-by: Anup Patel
Tested-by: Anup Patel
Acked-by: Joe Hershberger
---
v2: nothing.
drivers/net/macb.c | 6 +-
drivers/net/macb.h | 2 ++
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/ne
Few registers and bits were added by Cadence and
they were not updated in the headers.
Take the latest definitions as defined in Linux
header (5.1) that also includes some comments
about existing registers.
One register was improperly named (UR), fix that.
Signed-off-by: Ramon Fried
Reviewed-by:
Hi,
On 16 July 2019 15:17:46 BST, Matthias Brugger wrote:
>
>
>On 16/07/2019 15:37, and...@gherzan.ro wrote:
>> From: Andrei Gherzan
>>
>> This PR consolidates the work we've done to support the new Raspberry
>Pi
>
>I don't understand why you posted these while you asked me if I'll
>submit them
On Tue, Jul 16, 2019 at 9:42 PM Joe Hershberger wrote:
>
> On Tue, Jul 16, 2019 at 12:03 AM Ramon Fried wrote:
> >
> > On Mon, Jul 15, 2019 at 11:48 PM Joe Hershberger
> > wrote:
> > >
> > > On Mon, Jul 15, 2019 at 3:26 PM Ramon Fried wrote:
> > > >
> > > > On Mon, Jul 15, 2019 at 11:19 PM Ram
On Tue, Jul 16, 2019 at 12:03 AM Ramon Fried wrote:
>
> On Mon, Jul 15, 2019 at 11:48 PM Joe Hershberger
> wrote:
> >
> > On Mon, Jul 15, 2019 at 3:26 PM Ramon Fried wrote:
> > >
> > > On Mon, Jul 15, 2019 at 11:19 PM Ramon Fried wrote:
> > > >
> > > > On Mon, Jul 15, 2019 at 9:31 PM Joe Hersh
On 7/16/19 6:42 PM, Bin Meng wrote:
> At present there is Sphinx doc build system in U-Boot, however the
> contents are very limited, that only a few API descriptions for EFI,
> are included.
>
> This series proposes an initial Sphinx doc layout for future extension,
> by converting some of the pla
On 7/16/19 6:42 PM, Bin Meng wrote:
> Currently the Sphinx doc only contains API descriptions of several
> U-Boot subsystems. For future extension, group these existing docs
> into an API sub-directory.
>
> Signed-off-by: Bin Meng
Reviewed-by: Heinrich Schuchardt
On 7/16/19 6:42 PM, Bin Meng wrote:
> This extracts Intel Crown Bay board specific information from
> README.x86, converts plain text documentation to reST format and
> adds it to Sphinx TOC tree. No essential content change.
>
> Signed-off-by: Bin Meng
>
> ---
>
> doc/README.x86 |
On 7/16/19 6:42 PM, Bin Meng wrote:
> Add index.rst for board. More docs will be added later.
>
> Signed-off-by: Bin Meng
Reviewed-by: Heinrich Schuchardt
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On 7/16/19 6:42 PM, Bin Meng wrote:
> Convert plain text documentation to reStructuredText format and add
> it to Sphinx TOC tree. No essential content change.
>
> Signed-off-by: Bin Meng
Reviewed-by: Heinrich Schuchardt
___
U-Boot mailing list
U-Boot@
On 7/16/19 6:42 PM, Bin Meng wrote:
> Add index.rst for architecture specific info. More docs will be
> added later.
>
> Signed-off-by: Bin Meng
Reviewed-by: Heinrich Schuchardt
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinf
On 7/16/19 6:42 PM, Bin Meng wrote:
> Convert plain text documentation to reStructuredText format and add
> it to Sphinx TOC tree. No essential content change.
>
> Signed-off-by: Bin Meng
The conversion to RST is correct but we should rethink the values and
effect of the deadlines.
Reviewed-by:
On 7/16/19 6:42 PM, Bin Meng wrote:
> Convert plain text documentation to reStructuredText format and add
> it to Sphinx TOC tree. No essential content change.
>
> Signed-off-by: Bin Meng
> ---
I think these could be converted to level 3 sub-headings
1. Bind stage
2. Activation/probe
3. Running
On 7/16/19 6:42 PM, Bin Meng wrote:
> Add index.rst for driver model. More docs will be added later.
>
> Signed-off-by: Bin Meng
Reviewed-by: Heinrich Schuchardt
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
On 7/16/19 6:42 PM, Bin Meng wrote:
> This updates the index.rst to add top-level description about
> U-Boot documentation. Words are taken from Linux kernel docs
> and modified for U-Boot.
>
> Signed-off-by: Bin Meng
Reviewe-by: Heinrich Schuchardt
__
On 7/15/19 1:00 PM, Bryan O'Donoghue wrote:
> We currently have some inconsistent use of efi_add_memory_map()
> throughout the code. In particular the return value of efi_add_memory_map()
> is not interpreted the same way by various users in the codebase.
>
> This patch does the following:
>
> - Ch
This updates the index.rst to add top-level description about
U-Boot documentation. Words are taken from Linux kernel docs
and modified for U-Boot.
Signed-off-by: Bin Meng
---
doc/index.rst | 22 +++---
1 file changed, 19 insertions(+), 3 deletions(-)
diff --git a/doc/index.rst
This extracts Intel Crown Bay board specific information from
README.x86, converts plain text documentation to reST format and
adds it to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng
---
doc/README.x86 | 37 -
doc/board/ind
Add index.rst for board. More docs will be added later.
Signed-off-by: Bin Meng
---
doc/board/index.rst | 6 ++
doc/index.rst | 11 +++
2 files changed, 17 insertions(+)
create mode 100644 doc/board/index.rst
diff --git a/doc/board/index.rst b/doc/board/index.rst
new file m
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng
---
doc/arch/index.rst | 2 ++
doc/{README.mips => arch/mips.rst} | 14 --
2 files changed, 10 insertions(+), 6 deletions(
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng
---
doc/driver-model/{README.txt => design.rst} | 538 +++-
doc/driver-model/index.rst | 2 +
2 files change
Add index.rst for driver model. More docs will be added later.
Signed-off-by: Bin Meng
---
doc/driver-model/index.rst | 6 ++
doc/index.rst | 11 +++
2 files changed, 17 insertions(+)
create mode 100644 doc/driver-model/index.rst
diff --git a/doc/driver-model/index.r
Convert plain text documentation to reStructuredText format and add
it to Sphinx TOC tree. No essential content change.
Signed-off-by: Bin Meng
---
doc/driver-model/index.rst| 1 +
doc/driver-model/{MIGRATION.txt => migration.rst} | 42 ++-
2 files c
Add index.rst for architecture specific info. More docs will be
added later.
Signed-off-by: Bin Meng
---
doc/arch/index.rst | 6 ++
doc/index.rst | 11 +++
2 files changed, 17 insertions(+)
create mode 100644 doc/arch/index.rst
diff --git a/doc/arch/index.rst b/doc/arch/inde
Currently the Sphinx doc only contains API descriptions of several
U-Boot subsystems. For future extension, group these existing docs
into an API sub-directory.
Signed-off-by: Bin Meng
---
doc/{ => api}/efi.rst | 3 +++
doc/api/index.rst | 10 ++
doc/{ => api}/lin
At present there is Sphinx doc build system in U-Boot, however the
contents are very limited, that only a few API descriptions for EFI,
are included.
This series proposes an initial Sphinx doc layout for future extension,
by converting some of the plain text documentation to reStructuredText
forma
Now we have a logo for U-Boot, we can include it in the Sphinx
html doc.
Signed-off-by: Bin Meng
---
doc/conf.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/doc/conf.py b/doc/conf.py
index 168c313..0772fb6 100644
--- a/doc/conf.py
+++ b/doc/conf.py
@@ -170,7 +170,7 @@ ex
With Sphinx documentation moving from Documentation directory
to doc directory, we missed updating .gitignore for the Sphinx
build output directory.
Signed-off-by: Bin Meng
---
Documentation/.gitignore | 1 -
doc/.gitignore | 1 +
2 files changed, 1 insertion(+), 1 deletion(-)
create
From: Dalon Westergreen
Pin configuration of the FPGA devicetree block should be done
after core configuration in the arria10 fpga driver. This fix
corrects the check of status, and ensures that the fpga pin mux
is configured on correct configuration of the core fpga image.
Signed-off-by: Dalon
On 7/15/19 5:14 PM, Joel Stanley wrote:
This creates an empty flash image and places u-boot at the start of it.
It will be used by the ASPEED Qemu tests which boot u-boot from an
emaulated flash device.
diff --git a/bin/flash.create_image_32mb b/bin/flash.create_image_32mb
I can foresee a fu
On Tue, Jul 16, 2019 at 3:25 PM Matthias Brugger wrote:
>
>
>
> On 16/07/2019 15:37, and...@gherzan.ro wrote:
> > From: Andrei Gherzan
> >
> > Signed-off-by: Andrei Gherzan
> > ---
> > configs/rpi_4_32b_defconfig | 43 +
> > 1 file changed, 43 insertions(+)
>
On 7/16/19 5:09 AM, matthias@kernel.org wrote:
From: Fabian Vogt
Before we can send a message to the mailbox we have to check that there
is space to do so. Therefore we poll the status register. But up to now
the wrong status register, the one of mailbox 0, was checked. Fix this
by polling
Hi Tom,
Please pull this PR.
Summary:
- Beelink-x2 STB support (Marcus)
- H6 DDR3, LPDDR3 changes (Andre, Jernej)
- H6 pin controller, USB PHY (Andre)
thanks,
Jagan.
The following changes since commit 6070ef409c1018860e8dd1f077297546d9d80115:
Merge branch '2019-07-12-master-imports' (2019-07
On Mon, Jul 15, 2019 at 05:49:01PM -0500, Joe Hershberger wrote:
> Hi Tom,
>
> These patches passed travis [1] and are ready for master.
>
> Thanks,
> -Joe
>
> [1] - https://travis-ci.org/jhershbe/u-boot/builds/559064493
>
> The following changes since commit a9a3a37f92b072a56693ad665ab4c5cc73
On 16/07/2019 15:37, and...@gherzan.ro wrote:
> From: Matthias Brugger
>
> The bcm2711 has two emmc controller. The difference is the clocks
> they use. Add support for the second emmc contoller.
>
> Signed-off-by: Matthias Brugger
missing your signed-off-by.
> ---
> drivers/mmc/bcm2835_sd
On 16/07/2019 15:37, and...@gherzan.ro wrote:
> From: Andrei Gherzan
>
> Signed-off-by: Andrei Gherzan
Commit message missing.
> ---
> board/raspberrypi/rpi/rpi.c | 5 +
> 1 file changed, 5 insertions(+)
>
> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> index
On 16/07/2019 15:38, and...@gherzan.ro wrote:
> From: Andrei Gherzan
>
> Signed-off-by: Andrei Gherzan
Commit message.
You fix a file that you introduced in this series. Any reason why you don't just
send the file already fixed?
> ---
> arch/arm/dts/bcm2838-rpi-4-b.dts | 16 ++--
On 16/07/2019 15:37, and...@gherzan.ro wrote:
> From: Andrei Gherzan
>
> Signed-off-by: Andrei Gherzan
> ---
> configs/rpi_4_32b_defconfig | 43 +
> 1 file changed, 43 insertions(+)
> create mode 100644 configs/rpi_4_32b_defconfig
>
> diff --git a/configs
1 - 100 of 335 matches
Mail list logo
