Migrate the users of CONFIG_SYS_BOOTCOUNT_ADDR to Kconfig. We can
provide a default for BOOTCOUNT_AM33XX as that's a specific part of the
RTC in use. We can also provide a default for ARCH_LS1043A and
ARCH_LS1021A as they had been previously calculated and their symbols
are in Kconfig. In the ca
On Sat, Feb 24, 2018 at 08:49:38PM +0100, Marek Vasut wrote:
> On 02/24/2018 08:15 PM, Tom Rini wrote:
> > On Sat, Feb 24, 2018 at 12:24:17PM +0100, Marek Vasut wrote:
> >
> >> From: Masaru Nagai
> >>
> >> The u-boot-elf.srec is needed for some platforms, conveniently generate
> >> this file.
>
From: Duncan Hare
Modified tftp.c can be used to verify integrity of wget download by
setting compile directive and performing a second file transfer with
tftp transfer.
1 waring from patman about maintainers. How should this be handled?
Signed-off-by: Duncan Hare
---
cmd/Kconfig | 6 +
cm
From: Duncan Hare
Passed through patman, which does not like packed headers. But, packed
headers are a requirement to meet protocol header standards.
Signed-off-by: Duncan Hare
---
net/Makefile | 3 +-
net/tcp.c| 723 +++
net/tcp.h
From: Duncan Hare
This code has passed through patman.
Signed-off-by: Duncan Hare
---
include/net.h | 32 ++
net/Kconfig | 5 +++
net/net.c | 102 +++---
net/ping.c| 9 ++
4 files changed, 115 insertions(+)
On 02/24/2018 08:16 PM, Tom Rini wrote:
> On Sat, Feb 24, 2018 at 12:24:18PM +0100, Marek Vasut wrote:
>
>> From: Masaru Nagai
>>
>> The u-boot-elf.srec is needed for the minimon update on Gen3 SoCs,
>> conveniently generate this file.
>>
>> Signed-off-by: Marek Vasut
>> Cc: Nobuhiro Iwamatsu
>
On 02/24/2018 08:15 PM, Tom Rini wrote:
> On Sat, Feb 24, 2018 at 12:24:17PM +0100, Marek Vasut wrote:
>
>> From: Masaru Nagai
>>
>> The u-boot-elf.srec is needed for some platforms, conveniently generate this
>> file.
>>
>> Signed-off-by: Masaru Nagai
>> Signed-off-by: Hiroyuki Yokoyama
>> Si
On Sat, Feb 24, 2018 at 09:58:45PM +0100, Wolfgang Denk wrote:
> Dear Tom,
>
> In message <20180220220328.GC4311@bill-the-cat> you wrote:
> >
> > > We need to make sure that the MMC sub-system is ready in even a non-MMC
> > > boot case.
> > >
> > > Therefore, initialize mmc before loading enviro
Dear Tom,
In message <20180220220328.GC4311@bill-the-cat> you wrote:
>
> > We need to make sure that the MMC sub-system is ready in even a non-MMC
> > boot case.
> >
> > Therefore, initialize mmc before loading environment from it.
> >
> > Signed-off-by: Faiz Abbas
>
> Applied to u-boot/master
Dear Lukasz,
In message <20180220105933.7d402043@jawa> you wrote:
>
> > That patch intent was to keep the current behaviour as is for all
> > users, so the fact that you now have the FAT environment enabled is an
> > unwanted side-effect.
>
> The same situation is on Beagle Bone Black. Even thoug
On Sat, Feb 24, 2018 at 01:39:45PM -0600, Derald Woods wrote:
> On Sat, Feb 24, 2018 at 02:12:32PM -0500, Tom Rini wrote:
> > On Sat, Feb 24, 2018 at 09:29:02AM -0600, Derald D. Woods wrote:
> > > On Sat, Feb 24, 2018 at 09:35:43AM -0500, Tom Rini wrote:
> > > > On Sat, Feb 24, 2018 at 08:09:39AM -
On Sat, Feb 24, 2018 at 02:12:32PM -0500, Tom Rini wrote:
> On Sat, Feb 24, 2018 at 09:29:02AM -0600, Derald D. Woods wrote:
> > On Sat, Feb 24, 2018 at 09:35:43AM -0500, Tom Rini wrote:
> > > On Sat, Feb 24, 2018 at 08:09:39AM -0600, Derald D. Woods wrote:
> > >
> > > > This short series is an att
On Sat, Feb 24, 2018 at 12:24:18PM +0100, Marek Vasut wrote:
> From: Masaru Nagai
>
> The u-boot-elf.srec is needed for the minimon update on Gen3 SoCs,
> conveniently generate this file.
>
> Signed-off-by: Marek Vasut
> Cc: Nobuhiro Iwamatsu
> ---
> include/configs/rcar-gen3-common.h | 1 +
On Sat, Feb 24, 2018 at 12:24:17PM +0100, Marek Vasut wrote:
> From: Masaru Nagai
>
> The u-boot-elf.srec is needed for some platforms, conveniently generate this
> file.
>
> Signed-off-by: Masaru Nagai
> Signed-off-by: Hiroyuki Yokoyama
> Signed-off-by: Marek Vasut
> Cc: Hiroyuki Yokoyama
On Sat, Feb 24, 2018 at 09:29:02AM -0600, Derald D. Woods wrote:
> On Sat, Feb 24, 2018 at 09:35:43AM -0500, Tom Rini wrote:
> > On Sat, Feb 24, 2018 at 08:09:39AM -0600, Derald D. Woods wrote:
> >
> > > This short series is an attempt to make this set of boards use the same
> > > default configur
On 24/02/2018 16:58, Stefano Babic wrote:
> Hi Tom,
>
> some fixes, please pull from u-boot-imx, thanks!
>
Two fixes (Jagan's and Fabio's) were missing, new PR includes them:
The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
Merge git://git.denx.de/u-boot-sh (2018-
On 24/02/2018 19:22, Tom Rini wrote:
> On Sat, Feb 24, 2018 at 02:46:23PM -0300, Breno Matheus Lima wrote:
>> 2018-02-15 12:41 GMT-02:00 Fabio Estevam :
>>> Commit d695d6627803 ("spl: eMMC/SD: Provide one __weak spl_boot_mode()
>>> function") breaks the boot on several i.MX6 boards,
>>> such as cub
On Sat, Feb 24, 2018 at 02:46:23PM -0300, Breno Matheus Lima wrote:
> 2018-02-15 12:41 GMT-02:00 Fabio Estevam :
> > Commit d695d6627803 ("spl: eMMC/SD: Provide one __weak spl_boot_mode()
> > function") breaks the boot on several i.MX6 boards,
> > such as cuboxi and wandboard:
> >
> > U-Boot SPL 20
2018-02-15 12:41 GMT-02:00 Fabio Estevam :
> Commit d695d6627803 ("spl: eMMC/SD: Provide one __weak spl_boot_mode()
> function") breaks the boot on several i.MX6 boards,
> such as cuboxi and wandboard:
>
> U-Boot SPL 2018.03-rc1-00212-g48914fc119 (Feb 10 2018 - 11:04:33 +1300)
> Trying to boot from
Hi Maxime,
On Thu, 22 Feb 2018 14:53:35 +0100, Maxime Ripard
wrote:
> On Thu, Feb 22, 2018 at 02:33:41PM +0100, Miquel Raynal wrote:
> > Ensure the NAND controller reset line is deasserted before use.
> >
> > Signed-off-by: Miquel Raynal
> > ---
> > board/sunxi/board.c | 1 +
> > 1 file chang
On 24/02/2018 17:15, Jagan Teki wrote:
> Stefano,
>
> On Wed, Feb 21, 2018 at 6:35 PM, Jagan Teki wrote:
>> usdhc4 has eMMC on icore-rqs boards, SPL is not detecting
>> it becuase of u-boot,dm-spl flag so add it to make eMMC working.
>>
>> Signed-off-by: Jagan Teki
>> ---
>> arch/arm/dts/imx6qd
Stefano,
On Wed, Feb 21, 2018 at 6:35 PM, Jagan Teki wrote:
> usdhc4 has eMMC on icore-rqs boards, SPL is not detecting
> it becuase of u-boot,dm-spl flag so add it to make eMMC working.
>
> Signed-off-by: Jagan Teki
> ---
> arch/arm/dts/imx6qdl-icore-rqs.dtsi | 2 ++
> 1 file changed, 2 insert
Hi Tom,
some fixes, please pull from u-boot-imx, thanks!
The following changes since commit 02b0895c215e252cff50d9edf53a972d2bbbfd30:
Merge git://git.denx.de/u-boot-sh (2018-02-17 16:06:59 -0500)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you t
On Sat, Feb 24, 2018 at 09:35:43AM -0500, Tom Rini wrote:
> On Sat, Feb 24, 2018 at 08:09:39AM -0600, Derald D. Woods wrote:
>
> > This short series is an attempt to make this set of boards use the same
> > default configuration items where possible. This was prompted by an
> > investigation into
On Sat, Feb 24, 2018 at 08:09:39AM -0600, Derald D. Woods wrote:
> This short series is an attempt to make this set of boards use the same
> default configuration items where possible. This was prompted by an
> investigation into enabling SERIAL_SEARCH_ALL on omap3_evm. This feature
> now works fo
This commit does the following for BeagleBoard{-xM}:
- Enable DM_SERIAL which also enables SPL_DM_SERIAL
- Misc. config updates in support of DM_SERIAL
- Use CONFIG_ENV_IS_IN_FAT because BeagleBoard-xM has no NAND
- Use updated NAND layout (BeagleBoard):
device nand0 , # parts = 6
BeagleBoard 'xM' does not really have NAND. CONFIG_MTDIDS_DEFAULT and
CONFIG_MTDPARTS_DEFAULT can/should be empty for 'xM'. This commit sets
the defined values if they exist.
Signed-off-by: Derald D. Woods
---
board/ti/beagle/beagle.c | 8
1 file changed, 8 insertions(+)
diff --git a/b
This commit does the following for OMAP3 EVM:
- Track omap3_beagle changes where possible
- Remove CONFIG_SYS_MPUCLK and CONFIG_MTD which are not needed for the
default board configuration to work.
- Remove CONFIG_SPL_SYS_MALLOC_SIMPLE and CONFIG_SYS_MALLOC_F_LEN from
default config. CONFIG_SY
This short series is an attempt to make this set of boards use the same
default configuration items where possible. This was prompted by an
investigation into enabling SERIAL_SEARCH_ALL on omap3_evm. This feature
now works for omap3_evm after this series.
The series changes the default NAND layout
On Sat, Feb 24, 2018 at 12:39:01AM +0100, Anatolij Gustschin wrote:
> Hi Tom,
>
> please pull this series, it fixes the regression (HDMI output) on the
> RK3399 with some boards moved to live tree.
>
> The following changes since commit f0f6917188ad660cf002c10095f46ecf748b8f58:
>
> Prepare v2
On Tue, Feb 06, 2018 at 07:49:32AM -0600, Adam Ford wrote:
> With the contents of config_distro_defaults.h migrated to Kconfig,
> we can remove this header file completely
>
> Signed-off-by: Adam Ford
With a few tweaks:
- Re-did the deletion with sed and cleaned up empty #ifndef/#endif
lines.
On Tue, Feb 06, 2018 at 07:58:59AM -0600, Adam Ford wrote:
> This converts the following to Kconfig:
>CONFIG_BOOTP_BOOTPATH
>CONFIG_BOOTP_DNS
>CONFIG_BOOTP_GATEWAY
>CONFIG_BOOTP_HOSTNAME
>CONFIG_BOOTP_PXE
>CONFIG_BOOTP_SUBNETMASK
>CONFIG_CMDLINE_EDITING
>CONFIG_AUTO
On 02/23/2018 09:59 PM, Simon Glass wrote:
Hi Heinrich,
On 22 February 2018 at 05:04, Heinrich Schuchardt wrote:
Correct support for arrow keys: use the standard xterm escape sequences.
Provide support for F1-F12, Insert, Delete, Home, End, Page Up, Page Down.
Signed-off-by: Heinrich Schucha
From: Masaru Nagai
The u-boot-elf.srec is needed for the minimon update on Gen3 SoCs,
conveniently generate this file.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
include/configs/rcar-gen3-common.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/rcar-gen3-common.h
From: Masaru Nagai
The u-boot-elf.srec is needed for some platforms, conveniently generate this
file.
Signed-off-by: Masaru Nagai
Signed-off-by: Hiroyuki Yokoyama
Signed-off-by: Marek Vasut
Cc: Hiroyuki Yokoyama
Cc: Nobuhiro Iwamatsu
---
Makefile | 7 ++-
1 file changed, 6 insertions(
From: Hiroyuki Yokoyama
This patch fixes the address information of fdt.
wrong case:
=> fdt addr 0x4800
=> fdt move 0x4800 0x4100 0xa000
=> fdt addr
The address of the fdt is 4800
Active address in this case is 0x4100.
Signed-off-by: Hiroyuki Yokoyama
Signed-off-by: Mar
36 matches
Mail list logo
