Hi all,
We are testing EFI support on u-boot for our (Traverse) NXP LS1043
boards, as being able to only maintain one bootloader codebase (u-boot)
is very appealing to us.
So far it has worked well, but I have had trouble getting it to work
under v2017.11-rc*. It works fine on v2017.09.
I'
We need to update gd in assamble code after relocate,
this is a fix to:
adc421e arm: move gd handling outside of C code
Signed-off-by: Kever Yang
---
arch/arm/lib/crt0_64.S | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/lib/crt0_64.S b/arch/arm/lib/crt0_64.S
index 62fad45..2008b
Update m68k documentation to reflect the current ColdFire
architecture support status.
Signed-off-by: Angelo Dureghello
---
doc/README.m54418twr | 2 +
doc/README.m68k | 216 ---
2 files changed, 102 insertions(+), 116 deletions(-)
diff --g
From: Stephen Warren
This is required in the case where U-Boot is typically loaded and run at
a particular address, but for some reason the RAM at that location is not
available, e.g. due to memory fragmentation loading other boot binaries or
firmware, splitting an SMP complex between various dif
On Sun, Oct 22, 2017 at 11:08:43PM +0300, Artturi Alm wrote:
> Hi,
>
> this has been 'blocking' my attempts to revive the A10-boards i have
> since early june, or so.
>
> now i found this commit abc3e4df59f54cf3dda42a35a75d617fe861f5fe, which
> left the drivers/net/Makefile untouched, essentially
On 10/24/2017 01:54 AM, Jaehoon Chung wrote:
On 10/24/2017 12:22 AM, Stephen Warren wrote:
On 10/22/2017 08:53 PM, Jaehoon Chung wrote:
Dear Stephen,
On 10/21/2017 12:47 AM, Stephen Warren wrote:
With the latest content of u-boot-mmc/master, 41dc35a149b3 "drivers: mmc: Avoid
memory leak in c
Signed-off-by: Angelo Dureghello
---
configs/stmark2_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/stmark2_defconfig b/configs/stmark2_defconfig
index 3639aaa9e3..d34ffda260 100644
--- a/configs/stmark2_defconfig
+++ b/configs/stmark2_defconfig
@@ -18,6 +18,7 @@ CONFIG_CMD
cc108 board is wiring uart via PL which is good platform for SPL fpga
support.
Signed-off-by: Michal Simek
---
arch/arm/dts/Makefile| 1 +
arch/arm/dts/zynq-cc108.dts | 116 +++
configs/zynq_cc108_defconfig | 54
3 files c
Enable debug console.
Signed-off-by: Michal Simek
---
configs/zynq_zc770_xm010_defconfig | 4
1 file changed, 4 insertions(+)
diff --git a/configs/zynq_zc770_xm010_defconfig
b/configs/zynq_zc770_xm010_defconfig
index c70ac6bec230..49083e82814e 100644
--- a/configs/zynq_zc770_xm010_defcon
Enable MACRONIX flash for boards with QSPI enabled.
Signed-off-by: Michal Simek
---
configs/zynq_zc702_defconfig | 1 +
configs/zynq_zc706_defconfig | 1 +
configs/zynq_zc770_xm010_defconfig | 1 +
3 files changed, 3 insertions(+)
diff --git a/configs/zynq_zc702_defconfig b/configs
Enable qspi driver and flashes for this board.
Signed-off-by: Michal Simek
---
configs/zynq_zc770_xm013_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/zynq_zc770_xm013_defconfig
b/configs/zynq_zc770_xm013_defconfig
index d51256b124a3..39f6199c47f9 100644
--- a/confi
This is trival change which only ensures the same location with Linux
kernel.
Signed-off-by: Michal Simek
---
arch/arm/dts/zynq-7000.dtsi | 2 +-
arch/arm/dts/zynq-zybo.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-70
bootz command is valid way how to boot Linux kernel. Enable it by
default.
Signed-off-by: Michal Simek
---
configs/zynq_zc702_defconfig | 1 +
configs/zynq_zc706_defconfig | 1 +
configs/zynq_zc770_xm010_defconfig | 1 +
configs/zynq_zc770_xm011_defconfig | 1 +
configs/zynq_zc770_x
All these configs were moved to Kconfig that's why this empty ifdef
structure is not needed anymore.
Signed-off-by: Michal Simek
---
include/configs/zynq-common.h | 6 --
1 file changed, 6 deletions(-)
diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index b9599c7
From: Sai Pavan Boddu
Mention device-type = "ethernet-phy", as qemu will need this in absence
of compatible.
Signed-off-by: Sai Pavan Boddu
Signed-off-by: Michal Simek
---
arch/arm/dts/zynq-zc702.dts | 1 +
arch/arm/dts/zynq-zc706.dts | 1 +
arch/arm/dts/zynq-zc770-xm010.dts | 1
From: Chirag Parekh
Wire i2c pinmuxing gpio recovery for zc702.
Signed-off-by: Chirag Parekh
Signed-off-by: Michal Simek
---
arch/arm/dts/zynq-zc702.dts | 18 +-
1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc70
2017-08-25 16:46 GMT+09:00 Wolfgang Denk :
> Dear Tom,
>
> In message <20170825012557.GK2827@bill-the-cat> you wrote:
>>
>> Actual code we have to take care with anyhow, but it's still up to the
>> person that has to handle the syncing.
>
> Really? Should we not rather implement a common, consiste
Hi Michal,
>Patch looks good but only this prefix needs to be added to the Linux
>kernel. It should be present in this file. Please send the patch and
>when it is added to linux-next I will add your patch
It looks like our vendor prefix has been accepted into linux-next.
https://git.kernel.org/p
On 11/02/2017 03:53 PM, Michal Simek wrote:
The patch:
"dm: ahci: Unwind the confusing init code"
(sha1: 7cf1afce7fa3fe64189020fe14b93f7326dd0758)
introduce bug for ceva sata because port didn't start.
On the other hand the dwc_ahci.c was fixed correctly.
Do the same change for ceva too.
Signed-
Am Donnerstag, 19. Oktober 2017, 16:04:18 CET schrieb Maxime Ripard:
> The U-boot binary may trip over its actual allocated size in the storage.
> In such a case, the environment will not be readable anymore (because
> corrupted when the new image was flashed), and any attempt at using saveenv
> to
On 11/01/2017 04:19 AM, Shengzhou Liu wrote:
>
> York,
> please drop this version, I will update it and send next new version to add
> distro secureboot together.
>
Shengzhou,
Do not mark the patch as "superseded" if you haven't sent a new version.
You can mark it as "Not Applicable" instead
On 11/01/2017 09:20 PM, Ashish Kumar wrote:
> Signed-off-by: Ashish Kumar
> Signed-off-by: Amrita Kumari
> ---
> v2: Rebase to top
> v3: Consolidate defines in common file
> v4: Protect define using CONFIG_SCSI
>
Andy,
Does this set represent the latest change you and Ashish agreed on?
Please
On 11/01/2017 09:21 PM, Ashish Kumar wrote:
> Signed-off-by: Prabhakar Kushwaha
> Signed-off-by: Ashish Kumar
> Signed-off-by: Raghav Dogra
> ---
>
> v5:
> Rewording and incorporation of review comments in README
> Move define to defconfig
>
> arch/arm/Kconfig
On 11/01/2017 10:48 PM, Ashish Kumar wrote:
> Disto boot support give flexibility to run distro RFS like ubuntu's
s/Disto/Distro
s/give/gives
S/ubuntu/Ubuntu
> being deployed from SD card or USB stick. If it fails
> to detect external storage, fall back to qspi/sd boot.
>
> Signed-off-by: Ashish
On 11/01/2017 10:48 PM, Ashish Kumar wrote:
> Signed-off-by: Ashish Kumar
> ---
> configs/ls1088ardb_qspi_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/configs/ls1088ardb_qspi_defconfig
> b/configs/ls1088ardb_qspi_defconfig
> index db15d31..6ec949c 100644
> --- a/configs/ls
s/achi_/ahci_/g
Signed-off-by: Michal Simek
---
drivers/ata/ahci.c | 4 ++--
drivers/ata/dwc_ahci.c | 2 +-
drivers/ata/sata_ceva.c | 4 ++--
include/ahci.h | 8
4 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index
The patch:
"dm: ahci: Unwind the confusing init code"
(sha1: 7cf1afce7fa3fe64189020fe14b93f7326dd0758)
introduce bug for ceva sata because port didn't start.
On the other hand the dwc_ahci.c was fixed correctly.
Do the same change for ceva too.
Signed-off-by: Michal Simek
---
drivers/ata/sata_c
Add option to set spi controller clock frequency via device tree
using standard clock bindings.
Old way of setting spi controller clock frequency (via implementation
of 'cm_get_spi_controller_clk_hz' function in platform specific code)
remains supported for backward compatibility with targets which
On Monday 30 October 2017 07:37 PM, Faiz Abbas wrote:
> Hi,
>
> The variable *initialized* in mmc_initialize() is declared as static and
> initialised to 0 in the following commit. This makes the compiler put it
> in the .bss section of the image.
>
> commit 1b26bab12e85e8b0d382d6775e40d1444524
Fixes emmc initialization regression on the db410c platform.
Clearing this register while SDHCI_PRESENT_STATE reports
SDHCI_CMD_INHIBIT leads to undefined behaviour on the db410c.
When commit 7dde50 was merged (mmc: sdhci: Wait for SDHCI_INT_DATA_END
when transferring), SDHCI transfers transition
On Thu, Nov 02, 2017 at 11:36:52AM +0800, Icenowy Zheng wrote:
> The BSP of Nano Pi NEO2 provided by FriendlyARM uses 504MHz DRAM
> frequency, which is much lower than the current 672MHz used in
> mainline.
>
> Switch to use the BSP-provided frequency 504MHz for DRAM.
>
> Thanks to Thomas Kaiser,
On Wed, Nov 01, 2017 at 08:31:46AM +0800, Icenowy Zheng wrote:
> 在 2017-10-31 21:54，Maxime Ripard 写道：
> > On Tue, Oct 31, 2017 at 04:05:36PM +0800, icen...@aosc.io wrote:
> > > 在 2017-10-31 15:57，Jagan Teki 写道：
> > > > On Tue, Oct 31, 2017 at 5:06 AM, Icenowy Zheng wrote:
> > > > > Some H5 boards
On Thu, Nov 2, 2017 at 1:57 PM, Icenowy Zheng wrote:
> 在 2017-11-02 16:25，Jagan Teki 写道：
>>
>> On Thu, Nov 2, 2017 at 9:06 AM, Icenowy Zheng wrote:
>>>
>>> The BSP of Nano Pi NEO2 provided by FriendlyARM uses 504MHz DRAM
>>> frequency, which is much lower than the current 672MHz used in
>>> mainl
Hello Sir,
I want networking support in u-boot , In beaglebone black I easily got that.
But if i want the same in AM3354BZCZD80 processor I am unable to get that
.while booting from SD-card it is working but i am unable to boot from
network.can you tell me where and all i have to do the modifica
On Wed, Nov 01, 2017 at 10:18:07PM +0800, Icenowy Zheng wrote:
> Add support for setting up SimpleFB for LCD display output in DE2
> SimpleFB setup code.
>
> Signed-off-by: Icenowy Zheng
Acked-by: Maxime Ripard
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
htt
On Wed, Nov 01, 2017 at 10:18:06PM +0800, Icenowy Zheng wrote:
> When HDMI is not initialized (e.g. no monitor is plugged), the current
> SimpleFB code will still create a broken SimpleFB node.
>
> Detect whether HDMI is initialized when creating SimpleFB node.
>
> Fixes: be5b96f0e411 ("sunxi: se
> -Original Message-
> From: Jagan Teki [mailto:jagannadh.t...@gmail.com]
> Sent: Tuesday, October 31, 2017 1:32 PM
> To: Rajat Srivastava
> Cc: u-boot@lists.denx.de; York Sun ; Suresh Gupta
>
> Subject: Re: [PATCH 0/2] Disable hybrid mode for SPANSION S25FS-S family
>
> On Mon, Oct 30
From: Shawn Guo
The check in part_get_info_extended() for a successful partition
searching misses a condition for extended partition. In case of
(ext_part_sector == 0), we should anyway mark the partition as found,
even if it's an extended partition, i.e. (is_extended(pt->sys_ind) == 0).
Otherwis
Hi Bin,
> -Original Message-
> From: Bin Meng [mailto:bmeng...@gmail.com]
> Sent: Thursday, November 02, 2017 4:37 PM
> To: Ran Wang
> Cc: Marek Vasut ; Marek Vasut
> ; open list
> Subject: Re: [U-Boot] About the way to fix platform specific issue in source
> file xhci.c (U-Boot)
>
> Hi
Hi Ran,
On Thu, Nov 2, 2017 at 10:29 AM, Ran Wang wrote:
> Hi Bin,
>
>> -Original Message-
>> From: Bin Meng [mailto:bmeng...@gmail.com]
>> Sent: Wednesday, November 01, 2017 6:08 PM
>> To: Marek Vasut
>> Cc: Ran Wang ; Marek Vasut
>> ; open list
>> Subject: Re: [U-Boot] About the way t
在 2017-11-02 16:25，Jagan Teki 写道：
On Thu, Nov 2, 2017 at 9:06 AM, Icenowy Zheng wrote:
The BSP of Nano Pi NEO2 provided by FriendlyARM uses 504MHz DRAM
frequency, which is much lower than the current 672MHz used in
mainline.
Switch to use the BSP-provided frequency 504MHz for DRAM.
Thanks to
On Thu, Nov 2, 2017 at 9:06 AM, Icenowy Zheng wrote:
> The BSP of Nano Pi NEO2 provided by FriendlyARM uses 504MHz DRAM
> frequency, which is much lower than the current 672MHz used in
> mainline.
>
> Switch to use the BSP-provided frequency 504MHz for DRAM.
>
> Thanks to Thomas Kaiser, who pointe
On Rab, 2017-11-01 at 10:26 +0100, Marek Vasut wrote:
> On 11/01/2017 10:18 AM, tien.fong.c...@intel.com wrote:
> >
> > From: Tien Fong Chee
> >
> > Generic firmware loader framework contains some common
> > functionality
> > which is factored out from splash loader. It is reusable by any
> > sp
Hi Stefano,
On i.MX6 SoCs without VPU(MCIMX6Q4AVT10AD) the HDMI is not working.
That's because hdmi_isfr's parent clock, video_27m, is not correctly
ungated.
The video_27m clock is gated by CCM_CCGR3[CG8] - mipi_core_cfg_clk_enable.
On i.MX6 SoCs with VPU, the HDMI is working thanks to the
CCM_C
On Thu, Nov 2, 2017 at 12:46 PM, Kever Yang wrote:
> Rockchip use a 'loader2' partition for U-Boot, so u-boot.bin or
> u-boot.itb load by SPL need to locate at0x4000. Detail here:
> http://opensource.rock-chips.com/wiki_Boot_option
Sorry, I'm not clear is this because of arm64 itb? and we should
Use default value 0x4000 for SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR instead
of define a new one.
Signed-off-by: Kever Yang
---
configs/evb-rk3399_defconfig | 1 -
configs/firefly-rk3399_defconfig | 1 -
2 files changed, 2 deletions(-)
diff --git a/configs/evb-rk3399_defconfig b/configs/evb-rk339
Update rockchip U-Boot location to 0x4000/16384.
Signed-off-by: Kever Yang
---
doc/README.rockchip | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 4b7be0b..9d5af3d 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchi
Rockchip use a 'loader2' partition for U-Boot, so u-boot.bin or
u-boot.itb load by SPL need to locate at0x4000. Detail here:
http://opensource.rock-chips.com/wiki_Boot_option
Signed-off-by: Kever Yang
---
common/spl/Kconfig | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/c
48 matches
Mail list logo
