On Tue, Jul 26, 2016 at 8:58 AM, Simon Glass wrote:
> Generally the microcode is combined into a single block only (and removed
> from the device tree) when there are multiple blocks. But this is not a
> requirement.
>
> Adjust the ivybridge code to avoid assuming this.
>
> Signed-off-by: Simon Gl
On Tue, Jul 26, 2016 at 8:58 AM, Simon Glass wrote:
> Add a debug() at this point to help figure out what is wrong.
>
> Signed-off-by: Simon Glass
> ---
>
> arch/x86/cpu/ivybridge/cpu.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng
_
On Tue, Jul 26, 2016 at 8:58 AM, Simon Glass wrote:
> Add a debug() at this point to help figure out what is wrong.
>
> Signed-off-by: Simon Glass
> ---
>
> arch/x86/cpu/intel_common/cpu.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
Reviewed-by: Bin Meng
__
Hi Jaehoon,
> -Original Message-
> From: Jaehoon Chung [mailto:jh80.ch...@samsung.com]
> Sent: Thursday, July 28, 2016 1:01 PM
> To: Yangbo Lu; york sun; u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum
> A009620
>
> Hi Yangbo,
>
> On 07/28/2
Single 64KB get_contents_vfatname_block global variable would be used for
all FAT implementation instead of allocating additional two global variables
which are get_denfromdir_block and do_fat_read_at_block. This implementation
can help in saving up 128KB memory space.
Signed-off-by: Tien Fong Che
fill_dir_slot use get_contents_vfatname_block as a temporary buffer for
constructing a list of dir_slot entries. To save the memory and providing
correct type of memory for above usage, a local buffer with accurate size
declaration is introduced.
The local array size 640 is used because for long f
Hi Jaehoon,
> -Original Message-
> From: Jaehoon Chung [mailto:jh80.ch...@samsung.com]
> Sent: Wednesday, July 27, 2016 7:21 PM
> To: Yangbo Lu; york sun; u-boot@lists.denx.de
> Subject: Re: [U-Boot] [PATCH 4/4] mmc: add workaround for eSDHC erratum
> A009620
>
> On 07/27/2016 04:10 PM,
On Thu, Jul 28, 2016 at 6:01 AM, George McCollister
wrote:
> Pad configuration for SERIRQ is not set to enable the SERIRQ function
> on soft reset though strangely, it is on initial boot.
>
What does "soft reset" mean?
> Signed-off-by: George McCollister
> ---
> arch/x86/dts/baytrail_som-db580
Hi All,
On 07/26/2016 07:03 PM, Jaehoon Chung wrote:
> This "commit 429790026021d522d51617217d4b86218cca5750" is wrong.
> SDHCI_QUIRK_NO_HISPD_BIT is for skipping to set CTRL_HISPD bit.
>
> For example, Exynos didn't have CTRL_HISPD. But Highspeed mode
> is supported.
> (This quirks doesn't mean
Hi Jaehoon,
On 2016年07月28日 13:26, Jaehoon Chung wrote:
According to DesignWare TRM, FIFO_COUNT is bit[29:17].
If get the correct fifo_count value, it has to use the FIFO_MASK
as 0x1FFF, not 0x1FF.
Ah, I have no doubt the fifo_count defined. The fifo depth of Rockchip
SoCs is 256, the former wo
On Tuesday 26 July 2016 11:53 AM, Heiko Schocher wrote:
> Hello Vignesh,
>
> Am 25.07.2016 um 12:56 schrieb Vignesh R:
>> As I2C can be used before DRAM initialization for reading EEPROM,
>> avoid using static variables stored in BSS, since BSS is in DRAM, which
>> may not have been initialised
According to DesignWare TRM, FIFO_COUNT is bit[29:17].
If get the correct fifo_count value, it has to use the FIFO_MASK
as 0x1FFF, not 0x1FF.
Signed-off-by: Jaehoon Chung
---
include/dwmmc.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/dwmmc.h b/include/dwmmc.h
in
Hi Ziyuan and Jaehoon,
> -Original Message-
> From: Ziyuan Xu [mailto:xzy...@rock-chips.com]
> Sent: Wednesday, July 27, 2016 9:37 PM
> To: Jaehoon Chung; Yangbo Lu; u-boot@lists.denx.de; Tom Rini
> Cc: Pantelis Antoniou
> Subject: Re: [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some
Hi Yangbo,
On 07/28/2016 12:20 PM, Yangbo Lu wrote:
> Hi Jaehoon,
>
>
>> -Original Message-
>> From: Jaehoon Chung [mailto:jh80.ch...@samsung.com]
>> Sent: Wednesday, July 27, 2016 7:21 PM
>> To: Yangbo Lu; york sun; u-boot@lists.denx.de
>> Subject: Re: [U-Boot] [PATCH 4/4] mmc: add work
Hi Heiko,
On 22 July 2016 at 15:51, Heiko Stuebner wrote:
> Second version. Simon already applied the cleanup patches from my
> first version. I've tried to address Simons comments and hopefully
> haven't overlooked any.
>
> SPL is still missing, so following Simons comment from earlier
> it cann
On Wed, Jul 27, 2016 at 08:33:03PM -0600, Simon Glass wrote:
> The function comment should say 'buildman'. Fix it.
>
> Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-
Enable fastboot feature on rk3036, please refer to doc/README.rockchip
for more detailed usage.
Signed-off-by: Ziyuan Xu
---
arch/arm/dts/rk3036-sdk.dts| 2 --
board/rockchip/evb_rk3036/evb_rk3036.c | 46 ++
board/rockchip/kylin_rk3036/kylin_rk30
Miniarm is a rockchip rk3288 based development board, which has lots of
interface such as HDMI, USB, micro-SD card, Audio etc.
Signed-off-by: Ziyuan Xu
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/rk3288-miniarm.dts| 61 +++
arch/arm/dts/rk3288-minia
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> The 'evb-rk3288' is not a vendor name, change it to 'rockchip' which is
> the real vendor name.
>
> Signed-off-by: Ziyuan Xu
> Acked-by: Simon Glass
> ---
>
> Changes in v2: None
>
> arch/arm/mach-rockchip/rk3288/Kconfig |
On 27 July 2016 at 21:11, Simon Glass wrote:
> On 24 July 2016 at 21:45, Kever Yang wrote:
>> RK3399 needs reserve 0x20 at the beginning of DRAM, for ATF bl31.
>>
>> Signed-off-by: Kever Yang
>> ---
>>
>> Changes in v2:
>> - correct some typo on commit message and comment
>>
>> board/rockch
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> Boot Rom wouldn't initialize sdmmc while booting from eMMC. We need to
> setup sdmmc gpio, otherwise we will hit an error below:
>
> =>mmc info
> blk_get_device: if_type=6, devnum=0: dw...@ff0c.blk, 6, 0
> uclass_find_device_by_seq: 0 -1
> uclass_fi
On Wed, Jul 27, 2016 at 08:33:05PM -0600, Simon Glass wrote:
> The current code for setting up the toolchain config always writes the new
> paths to an item called 'toolchain'. This means that it will overwrite any
> existing toolchain item with the same name. In practice, this means that:
>
>
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> CONFIG_SYS_LOAD_ADDR is absolutely safe to store image for
> fastboot.
>
> Signed-off-by: Ziyuan Xu
> Acked-by: Simon Glass
> ---
>
> Changes in v2: None
>
> include/configs/rk3288_common.h | 4 +---
> 1 file changed, 1 insertion(+), 3 deletions(-)
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> Add an extra byte so that this data is not byteswapped.
>
> Signed-off-by: Ziyuan Xu
> Acked-by: Simon Glass
> Signed-off-by: Ziyuan Xu
> ---
>
> Changes in v2: None
>
> arch/arm/dts/rk3288-evb.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 delet
On 27 July 2016 at 21:11, Simon Glass wrote:
> On 26 July 2016 at 04:28, Ziyuan Xu wrote:
>> Fennec is a RK3288-based development board with 2 USB ports, HDMI,
>> micro-SD card, audio and WiFi and Gigabit Ethernet. It also includes
>> on-board 8GB eMMC and 2GB of SDRAM. Expansion connectors provi
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> Revise config to CONFIG_ROCKCHIP_RK3288_PINCTRL.
>
> Signed-off-by: Ziyuan Xu
> Acked-by: Simon Glass
> Signed-off-by: Ziyuan Xu
> ---
>
> Changes in v2: None
>
> configs/evb-rk3288_defconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
On 25 July 2016 at 03:16, Kever Yang wrote:
> Hi John,
>
>
> On 07/25/2016 05:02 PM, John Keeping wrote:
>>
>> Bank 0 is the "PMU GPIO" bank which is controlled by the PMU registers
>> rather than the GRF registers. In the GRF the top half of the register
>> is used as a mask so that some bits ca
On 27 July 2016 at 21:11, Simon Glass wrote:
> On 26 July 2016 at 04:28, Ziyuan Xu wrote:
>> Reduce compilation time for SPL.
>>
>> Signed-off-by: Ziyuan Xu
>> ---
>>
>> Changes in v2: None
>>
>> include/configs/rk3288_common.h | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> Acked-
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> CONFIG_DOS_PARTITION and CONFIG_EFI_PARTITION are already included in
> config_distro_defaults.h, and we don't need them in SPL stage.
>
> Signed-off-by: Ziyuan Xu
> Acked-by: Simon Glass
> ---
>
> Changes in v2: None
>
> include/configs/kylin_rk3036
On 27 July 2016 at 21:11, Simon Glass wrote:
> On 26 July 2016 at 04:28, Ziyuan Xu wrote:
>> PopMetal is a rockchip rk3288 based board made by ChipSpark, which has
>> many interface such as HDMI, VGA, USB, micro-SD card, WiFi, Audio and
>> Gigabit Ethernet.
>>
>> Signed-off-by: Ziyuan Xu
>> ---
Hi Tom.
On 27 July 2016 at 21:28, Tom Rini wrote:
> On Wed, Jul 27, 2016 at 08:32:57PM -0600, Simon Glass wrote:
>
>> This makes a few minor improvements to buildman to make it work more easiler
>> for first-time users:
>>
>> - Improve progress and warning messages when fetching toolchains
>> - F
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> Update MAINTAINER files for kylin_rk3036, evb_rk3036.
>
> Signed-off-by: Ziyuan Xu
> Acked-by: Simon Glass
> ---
>
> Changes in v2: None
>
> board/rockchip/evb_rk3036/MAINTAINERS | 4 ++--
> board/rockchip/kylin_rk3036/MAINTAINERS | 4 ++--
> 2 fil
On 24 July 2016 at 23:11, Jaehoon Chung wrote:
> On 07/23/2016 11:08 AM, Simon Glass wrote:
>> On 22 July 2016 at 03:22, Kever Yang wrote:
>>> Not like the mmc-legacy which the devnum starts from 1, it starts from 0
>>> in mmc-uclass, so the device number should be (devnum + 1) in get_mmc_num().
Tom
> On 27-Jul-2016, at 8:55 PM, Tom Rini wrote:
>
>> On Wed, Jul 27, 2016 at 02:04:24PM +, B, Ravi wrote:
>> Hi Tom
>>
>> Missed this thread to reply.
>>
index ef12f9f..ed3e295 100644
--- a/Kconfig
+++ b/Kconfig
@@ -336,6 +336,33 @@ config SPL_FIT_IMAGE_POST_PROCESS
>
On Wed, Jul 27, 2016 at 08:32:59PM -0600, Simon Glass wrote:
> If there is no ~/.buildman file, buildman currently complains and exists. To
> make things a little more friendly, create an empty one automatically. This
> will not allow things to be built, but --fetch-arch can be used to handle
> th
On Wed, Jul 27, 2016 at 08:32:57PM -0600, Simon Glass wrote:
> This makes a few minor improvements to buildman to make it work more easiler
> for first-time users:
>
> - Improve progress and warning messages when fetching toolchains
> - Fix a bug where toolchain paths can be overwritten when fetc
Hi,
On Thu, Jul 28, 2016 at 3:14 AM, Siarhei Siamashka
wrote:
> Hello Hans,
>
> On Wed, 27 Jul 2016 18:10:34 +0200
> Hans de Goede wrote:
>
>> It seems that bytes 13-14 of the SID / bytes 1-2 from word 3 of the SID
>> are always 0 on H3 making it a poor candidate to use as source for the
>> seri
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> PopMetal is a rockchip rk3288 based board made by ChipSpark, which has
> many interface such as HDMI, VGA, USB, micro-SD card, WiFi, Audio and
> Gigabit Ethernet.
>
> Signed-off-by: Ziyuan Xu
> ---
>
> Changes in v2: None
>
> arch/arm/dts/Makefile
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> Reduce compilation time for SPL.
>
> Signed-off-by: Ziyuan Xu
> ---
>
> Changes in v2: None
>
> include/configs/rk3288_common.h | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Acked-by: Simon Glass
___
On 26 July 2016 at 04:28, Ziyuan Xu wrote:
> Fennec is a RK3288-based development board with 2 USB ports, HDMI,
> micro-SD card, audio and WiFi and Gigabit Ethernet. It also includes
> on-board 8GB eMMC and 2GB of SDRAM. Expansion connectors provides access
> to display pins, I2C, SPI, UART and GP
On 24 July 2016 at 21:45, Kever Yang wrote:
> RK3399 needs reserve 0x20 at the beginning of DRAM, for ATF bl31.
>
> Signed-off-by: Kever Yang
> ---
>
> Changes in v2:
> - correct some typo on commit message and comment
>
> board/rockchip/evb_rk3399/evb-rk3399.c | 3 ++-
> 1 file changed, 2 i
On 24 July 2016 at 22:50, Kever Yang wrote:
> Signed-off-by: Kever Yang
> ---
>
> drivers/mmc/rockchip_sdhci.c| 10 +-
> include/configs/rk3399_common.h | 2 +-
> 2 files changed, 10 insertions(+), 2 deletions(-)
Reviewed-by: Simon Glass
___
Hi Kever,
On 24 July 2016 at 22:50, Kever Yang wrote:
> This patch add driver for:
> - clock driver including set_rate for cpu, mmc, vop, I2C.
> - sysreset driver
> - grf syscon driver
>
> Signed-off-by: Kever Yang
> ---
>
> arch/arm/include/asm/arch-rockchip/cru_rk3399.h | 93 +++
> arch/arm/
> -Original Message-
> From: york sun
> Sent: Thursday, July 28, 2016 1:35 AM
> To: Qianyu Gong ; u-boot@lists.denx.de; Prabhakar
> Kushwaha ; Mingkai Hu
> Cc: Shaohui Xie ; Zhiqiang Hou ;
> Wenbin Song
> Subject: Re: [PATCH 1/2] net: fm: fix spi flash probe for using driver model
>
>
Buildman has been around for 3 years now. It has had a lot of use and
testing. Perhaps it is time to remove MAKEALL.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v2: None
MAKEALL | 850
1 file changed, 850 del
It doesn't make sense to complain about missing toolchains when the
--fetch-arch option is being used. The user is presumably aware that there
is a toolchain problem and is actively correcting it by running with this
option.
Refactor the code to avoid printing this confusing message.
Signed-off-b
For those who just want to build a board, it is useful to see a quick hint
right at the start of the documentation. Add a few commands showing how to
download toolchains and build a board.
Signed-off-by: Simon Glass
---
Changes in v2:
- Update to suggest fetching just the 'arm' tool chain
tool
When there are no toolchains a warning is printed. But in some cases this is
confusing, such as when the user is fetching new toolchains.
Adjust the function to supress the warning in this case.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add code to actually suppress the warning
tools/bu
Use colour to make it easier to see what is going on. Also print a message
before downloading a new toolchain. Mention --fetch-arch in the message that
is shown when there are no available toolchains, since this is the quickest
way to resolve the problem.
Signed-off-by: Simon Glass
Reviewed-by: T
The current code for setting up the toolchain config always writes the new
paths to an item called 'toolchain'. This means that it will overwrite any
existing toolchain item with the same name. In practice, this means that:
buildman --fetch-arch all
will fetch all toolchains, but only the path
It is confusing to mention MAKEALL when it is not the normal way of building
U-Boot anymore. Update the documentation to suit.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v2: None
README | 35 ++-
board/Barix/ipam
The function comment should say 'buildman'. Fix it.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/buildman/toolchain.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/buildman/toolchain.py b/tools/buildman/toolchain.py
index 38876c2..02fbeb5 100644
--- a/t
If there is no ~/.buildman file, buildman currently complains and exists. To
make things a little more friendly, create an empty one automatically. This
will not allow things to be built, but --fetch-arch can be used to handle
that.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add a message a
Tidy up some problems found by a recent review.
Signed-off-by: Simon Glass
Reviewed-by: Tom Rini
---
Changes in v2: None
tools/buildman/README | 53 +--
1 file changed, 30 insertions(+), 23 deletions(-)
diff --git a/tools/buildman/README b/tool
This makes a few minor improvements to buildman to make it work more easiler
for first-time users:
- Improve progress and warning messages when fetching toolchains
- Fix a bug where toolchain paths can be overwritten when fetching
- Note at the top of the help how to get started
Also this series
When buildman is run via a symlink, this test fails. Fix it to work the same
way as buildman itself.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/buildman/func_test.py | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/buildman/func_test.py b/tools/buildman/f
In the case of omap3 we have a number of platforms that are close to
exceeding SRAM limits, depending on compiler. Move to USE_TINY_PRINTF
to give them more room. OMAP4 will soon enough be in a similar place,
so enable that now.
Signed-off-by: Tom Rini
---
arch/arm/Kconfig | 2 ++
1 file chang
These config targets were added well before the Kconfig migration began
as a way to demonstrate how to make these platforms work with cut down
features. At this point in time they no longer serve a good purpose so
remove them.
Signed-off-by: Tom Rini
---
arch/arm/cpu/armv7/omap3/Kconfig |
In reality all omap3 platforms support SPL so move the select for this
up a level.
Signed-off-by: Tom Rini
---
arch/arm/Kconfig | 1 +
arch/arm/cpu/armv7/omap3/Kconfig | 19 ---
2 files changed, 1 insertion(+), 19 deletions(-)
diff --git a/arch/arm/Kconfig b/arc
This patch fixes data starvation by host timeout(HTO) error interrupt
which occurred under FIFO mode transfer on rk3036 board.
The former implement, the actual bytes were transmitted may be less than
should be. The size will still subtract value of len in case of there is
no receive/transmit FIFO
The former implement, dw_mmc will push and pop the redundant data to
FIFO, we should transfer it according to the real size.
Signed-off-by: Ziyuan Xu
---
drivers/mmc/dw_mmc.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
index 2cf7bae..38d4a64
Hi Michal,
On 24 July 2016 at 20:07, Simon Glass wrote:
> On 15 July 2016 at 01:35, Michal Simek wrote:
>> Add new Kconfig option to disable arch_fixup_fdt() calls for cases where
>> U-Boot shouldn't update memory setup in DTB file.
>> One example of usage of this option is to boot OS with diffe
Hi Tom,
Here is a new power domain uclass, the rest of the MMC conversion
(moving over zynq and socfpga) and a few other dm improvements.
The following changes since commit 0b6699ad8ea95803d7ce40d1dc1caea902a6d22c:
Merge branch 'master' of http://git.denx.de/u-boot-sunxi (2016-07-26
18:33:04 -
Hi Stephen,
On 07/28/2016 06:24 AM, Stephen Warren wrote:
> From: Stephen Warren
>
> Tegra186 supports the new standard clock and reset APIs. Older Tegra SoCs
> still use custom APIs. Enhance the Tegra MMC driver so that it can operate
> with either set of APIs.
>
> Signed-off-by: Stephen Warre
print_bi_dram outputs start address and size for each DRAM bank.
Signed-off-by: Max Filippov
---
Changes v1->v2:
- fix build for architectures w/o CONFIG_NR_DRAM_BANKS and bi_dram in
bd_t.
cmd/bdinfo.c | 60 +++-
1 file changed, 19 inser
print_std_bdinfo outputs typical set of board information entries:
boot params location, memory and flash addresses and sizes, network
interfaces information and configured serial baud rate.
Signed-off-by: Max Filippov
---
cmd/bdinfo.c | 32
1 file changed, 12 in
print_bi_boot_params outputs boot parameters structure location.
Signed-off-by: Max Filippov
---
cmd/bdinfo.c | 20 +---
1 file changed, 13 insertions(+), 7 deletions(-)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index f2435ab..60aaafb 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
print_bi_flash outputs flashstart, flashsize and flashoffset lines.
Signed-off-by: Max Filippov
---
cmd/bdinfo.c | 54 +++---
1 file changed, 27 insertions(+), 27 deletions(-)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index c8a0511..0bef930 100644
print_baudrate outputs serial baud rate.
Signed-off-by: Max Filippov
---
cmd/bdinfo.c | 39 +--
1 file changed, 25 insertions(+), 14 deletions(-)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 4ffb757..403ed3e 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bdinfo.c
@@ -
print_eth_ip_addr outputs eth configurations for up to 6 interfaces and
configured IP address.
Signed-off-by: Max Filippov
---
cmd/bdinfo.c | 113 +++
1 file changed, 36 insertions(+), 77 deletions(-)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo
print_bi_mem outputs memstart and memsize lines.
Signed-off-by: Max Filippov
---
cmd/bdinfo.c | 42 ++
1 file changed, 26 insertions(+), 16 deletions(-)
diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c
index 60aaafb..df68b58 100644
--- a/cmd/bdinfo.c
+++ b/cmd/bd
Hi,
this series extracts common parts of cmd/bdinfo.c used by various
architectures into reusable functions.
Changes v1->v2:
- fix build for architectures w/o CONFIG_NR_DRAM_BANKS and bi_dram in
bd_t.
Please review.
Max Filippov (7):
cmd/bdinfo: extract print_bi_boot_params
cmd/bdinfo: ex
On Wed, Jul 27, 2016 at 09:17:28PM +0200, Anatolij Gustschin wrote:
> Hi Tom,
>
> On Mon, 25 Jul 2016 17:46:31 -0400
> Tom Rini tr...@konsulko.com wrote:
> ...
> > Hey, good catch. Anatolij, please fix and re-submit, thanks!
>
> sandbox build fixed now, here is updated pull request:
>
> The fo
Pad configuration for SERIRQ is not set to enable the SERIRQ function
on soft reset though strangely, it is on initial boot.
Signed-off-by: George McCollister
---
arch/x86/dts/baytrail_som-db5800-som-6867.dts | 6 ++
1 file changed, 6 insertions(+)
diff --git a/arch/x86/dts/baytrail_som-db5
From: Bryan Wu
Tegra186 has 8 I2C controllers including BPMP I2C. This patch adds the
other 7 generic controllers to Tegra186's DT.
Signed-off-by: Bryan Wu
(swarren, fixed DT node sort order, tweak patch description)
Signed-off-by: Stephen Warren
---
arch/arm/dts/tegra186.dtsi | 104 +
From: Bryan Wu
clk/reset API was tested on T186 platform and previous chip like
T210/T124 will still use the old APIs.
Signed-off-by: Bryan Wu
(swarren, simplified some ifdefs, removed indent level inside an ifdef)
Signed-off-by: Stephen Warren
Cc: Heiko Schocher
---
drivers/i2c/tegra_i2c.c
From: Bryan Wu
Enable I2C devices in DT and enable building tegra_i2c.c driver.
Signed-off-by: Bryan Wu
(swarren, commit msg rework, fixed DT node sort order)
Signed-off-by: Stephen Warren
---
arch/arm/dts/tegra186-p2771-.dtsi | 35 +++
include/configs/p277
From: Stephen Warren
The Tegra186 PCIe DT content is almost identical to previous chips, except
that the:
- There are 3 ports instead of 2.
- Some physical addresses have moved.
- PHY programming is handled by firmware, so CCPLEX DTs don't need to
reference any PHY.
- The power domain is expli
From: Stephen Warren
Tegra186 supports the new standard clock, reset, and power domain APIs.
Older Tegra SoCs still use custom APIs. Enhance the Tegra PCIe driver so
that it can operate with either set of APIs.
On Tegra186, the BPMP handles all aspects of PCIe PHY (UPHY) programming.
Consequentl
From: Stephen Warren
Introduce tegra_board_init() and call it from board_init(). Tegra wil use
tegra_board_init() for board-specific initialization, and board_init() for
SoC-specific initialization.
Signed-off-by: Stephen Warren
---
arch/arm/mach-tegra/board186.c | 7 ++-
1 file changed, 6
From: Stephen Warren
Tegra186 supports the new standard clock and reset APIs. Older Tegra SoCs
still use custom APIs. Enhance the Tegra MMC driver so that it can operate
with either set of APIs.
Signed-off-by: Stephen Warren
Cc: Pantelis Antoniou
---
arch/arm/include/asm/arch-tegra/tegra_mmc.
From: Stephen Warren
In Tegra186, on-SoC reset signals are manipulated using IPC requests to
the BPMP (Boot and Power Management Processor). This change implements a
driver that does that. It is unconditionally selected by CONFIG_TEGRA186
since virtually any Tegra186 build of U-Boot will need the
From: Stephen Warren
In Tegra186, SoC power domains are manipulated using IPC requests to
the BPMP (Boot and Power Management Processor). This change implements a
driver that does that.
Signed-off-by: Stephen Warren
---
drivers/power/domain/Kconfig | 7 +++
drivers/power/domai
From: Stephen Warren
The Tegra BPMP (Boot and Power Management Processor) is a separate
auxiliary CPU embedded into Tegra to perform power management work, and
controls related features such as clocks, resets, power domains, PMIC I2C
bus, etc. This driver provides the core low-level communication
From: Stephen Warren
The DT binding for the Tegra186 HSP module apparently wasn't quite final
when I posted initial U-Boot support for it. Add the final DT binding doc
and adapt all code and DT files to match it.
Signed-off-by: Stephen Warren
---
arch/arm/dts/tegra186.dtsi
From: Stephen Warren
This adds the DT content that's needed to allow board DTs to enable use
of BPMP, clocks, resets, GPIOs, eMMC, and SD cards.
Signed-off-by: Stephen Warren
---
arch/arm/dts/tegra186.dtsi | 55 --
1 file changed, 53 insertions(+), 2
From: Stephen Warren
The Tegra BPMP (Boot and Power Management Processor) is a separate
auxiliary CPU embedded into Tegra to perform power management work, and
controls related features such as clocks, resets, power domains, PMIC I2C
bus, etc. These bindings dictate how to represent the BPMP in d
From: Stephen Warren
In Tegra186, on-SoC clocks are manipulated using IPC requests to the BPMP
(Boot and Power Management Processor). This change implements a driver
that does that. A tegra/ sub-directory is created to follow the existing
pattern. It is unconditionally selected by CONFIG_TEGRA186
On 07/21/2016 04:45 AM, Marek Vasut wrote:
> On 07/21/2016 10:02 AM, Rajesh Bhagat wrote:
>> Hi All,
>>
>> Any Comments?
>
> York, please check this.
Passed compiling tests on powerpc and arm platforms.
York
>
>>> -Original Message-
>>> From: Rajesh Bhagat [mailto:rajesh.bha...@nxp.com]
Am 27.07.2016 um 16:26 schrieb Paul Burton:
> This patch introduces support for building U-Boot to run on the MIPS
> Boston development board. This is a board built around an FPGA & an
> Intel EG20T Platform Controller Hub, used largely as part of the
> development of new CPUs and their software
On Wed, Jul 27, 2016 at 08:10:08PM +0200, Maxime Ripard wrote:
> On Wed, Jul 27, 2016 at 09:31:25PM +0530, Jagan Teki wrote:
> > >> >> FWIW, if anyone is interested in taking over, I'm can help with the
> > >> >> load if needed.
> > >> >
> > >> > I would also be quite happy to see a joint custodian
Hi Tom,
On Mon, 25 Jul 2016 17:46:31 -0400
Tom Rini tr...@konsulko.com wrote:
...
> Hey, good catch. Anatolij, please fix and re-submit, thanks!
sandbox build fixed now, here is updated pull request:
The following changes since commit 19ce924ff914f315dc2fdf79f357825c513aed6e:
Prepare v2016.0
On 07/20/2016 03:51 AM, Gong Qianyu wrote:
> The current code would always use the speed and mode set by
> CONFIG_ENV_SPI_MAX_HZ and CONFIG_ENV_SPI_MODE. But if using
> SPI driver model it should get the values from DT.
>
> Signed-off-by: Gong Qianyu
> ---
> drivers/net/fm/fm.c | 10 ++
>
Hello Hans,
On Wed, 27 Jul 2016 18:10:34 +0200
Hans de Goede wrote:
> It seems that bytes 13-14 of the SID / bytes 1-2 from word 3 of the SID
> are always 0 on H3 making it a poor candidate to use as source for the
> serialnr / mac-address, switch to word1 which seems to be more random.
>
> Cc:
On Wed, 2016-07-27 at 18:10 +0200, Hans de Goede wrote:
> It seems that bytes 13-14 of the SID / bytes 1-2 from word 3 of the
> SID
> are always 0 on H3 making it a poor candidate to use as source for
> the
> serialnr / mac-address, switch to word1 which seems to be more
> random.
>
> Cc: Chen-Yu
On Wed, 2016-07-27 at 18:10 +0200, Hans de Goede wrote:
> With the recent bug fixes for the sun8i_emac driver all known issues
> are resolved, so we can re-enable the driver.
>
> While at it, also enable the emac on the Orange Pi One.
>
> Cc: Chen-Yu Tsai
> Cc: Corentin LABBE
> Cc: Amit Singh T
On Wed, 2016-07-27 at 18:10 +0200, Hans de Goede wrote:
> On 2 of my H3 boards bytes 13-15 of the SID are all 0 leading to
> the NIC specific bytes of the mac all being 0, which leads to the
> boards not getting an ipv6 address from the dhcp server.
>
> This commits adds a check to ensure this doe
On Wed, 2016-07-27 at 18:10 +0200, Hans de Goede wrote:
> This fixes the following CACHE warnings when using sun8i_emac:
>
> => dhcp
> BOOTP broadcast 1
> BOOTP broadcast 2
> CACHE: Misaligned operation at range [7bf594a8, 7bf59628]
> BOOTP broadcast 3
> CACHE: Misaligned operation at range [7bf59
On Wed, Jul 27, 2016 at 09:31:25PM +0530, Jagan Teki wrote:
> >> >> FWIW, if anyone is interested in taking over, I'm can help with the
> >> >> load if needed.
> >> >
> >> > I would also be quite happy to see a joint custodian setup similar to
> >> > how some of the Linux Kernel trees are handled,
On Tue, 26 Jul 2016 08:52:52 +0200
Anatolij Gustschin ag...@denx.de wrote:
> From: Alexey Brodkin
>
> This change introduces default_splash_locations which
> simplifies splash recovery from the first partition of
> USB/MMC/SATA drive.
>
> Given usual mapping of the first partition of external m
1 - 100 of 181 matches
Mail list logo
