Hi,
On 13-01-15 20:59, Ian Campbell wrote:
On Sun, 2015-01-11 at 20:34 +0100, Hans de Goede wrote:
Hookup OTG USB controller support and enable the otg controller + USB-keyb
on various tablets.
This allows tablet owners to interact with u-boot without needing to solder
a serial console onto th
Hi Alexey,
On Wed, 14 Jan 2015 06:23:55 +
Alexey Brodkin wrote:
> Hi Masahiro-san,
>
> On Wed, 2015-01-14 at 13:12 +0900, Masahiro Yamada wrote:
> > On Fri, 9 Jan 2015 21:21:20 +
> > Alexey Brodkin wrote:
> > I think this change is harmless, but
> >
> > #define CONFIG_CMD_BDI 1
>
Hi Akshay,
Thanks for fast posting. I look at this patch briefly.
On 01/13/2015 09:03 PM, Akshay Saraswat wrote:
> Apparently, members of clk_bit_info array do not map correctly
> to the members of enum periph_id. This mapping got broken after
> we changed periph_id(s) to reflect interrupt number
Hi Masahiro-san,
On Wed, 2015-01-14 at 13:12 +0900, Masahiro Yamada wrote:
> On Fri, 9 Jan 2015 21:21:20 +
> Alexey Brodkin wrote:
> I think this change is harmless, but
>
> #define CONFIG_CMD_BDI 1
>
> is simpler than
>
> #ifndef CONFIG_CMD_BDI
> #define CONFIG_CMD_BDI
> #endif
>
>
>
Hi York,
> -Original Message-
> From: Sun York-R58495
> Sent: Tuesday, January 13, 2015 10:01 PM
> On 01/13/2015 05:19 AM, Bhupesh Sharma wrote:
> > This patch adds basic constructs in the ARMv8 u-boot code to handle
> > and apply Cortex-A57 specific erratas.
> >
> > As and example, the f
Hi,
On 12 January 2015 at 21:58, Jaehoon Chung wrote:
> Hi.
>
> On 01/13/2015 02:40 PM, Akshay Saraswat wrote:
>> Hi,
>>
>>> Hi,
>>>
>>>
>>> On 01/13/2015 11:56 AM, Simon Glass wrote:
Hi,
On 12 January 2015 at 18:51, Joonyoung Shim
wrote:
> Hi,
>
> On 01/13/2015
HI Masahiro,
On 13 January 2015 at 20:05, Masahiro Yamada wrote:
> Hi Alexey,
>
>
> On Fri, 9 Jan 2015 20:09:22 +
> Alexey Brodkin wrote:
>
>> Hi Masahiro-san,
>>
>> On Tue, 2015-01-06 at 00:34 +0900, Masahiro YAMADA wrote:
>> > Hi Alexey,
>> >
>> > 2015-01-03 22:20 GMT+09:00 Alexey Brodkin
On Fri, 9 Jan 2015 21:21:20 +
Alexey Brodkin wrote:
> Hi all,
>
> On Sat, 2015-01-03 at 16:20 +0300, Alexey Brodkin wrote:
> > Now with switch to Kconfig it's possible to select commands via
> > menuconfig or defconfigs.
> >
> > Moreover some commands are enabled by default in both
> > "co
Hi Alexey,
On Fri, 9 Jan 2015 20:09:22 +
Alexey Brodkin wrote:
> Hi Masahiro-san,
>
> On Tue, 2015-01-06 at 00:34 +0900, Masahiro YAMADA wrote:
> > Hi Alexey,
> >
> > 2015-01-03 22:20 GMT+09:00 Alexey Brodkin :
> > > Now when we may select commands via menuconfig let's adjust default
> > >
Hi Tom,
Here are all the buildman enhancements and bug fixes so far. I have a
few more to work on but no patches yet.
Note these are in branch 'buildman'.
The following changes since commit 5f88ed5cde04612e5b4520327b82d81a3f5493a0:
Merge git://git.denx.de/u-boot-x86 (2015-01-13 13:39:25 -050
We are removing bunch of non-generic boards these days.
Updating doc/README.scrapyard is a really tedious task, but it can
be automated. I hope this tool will make our life easier.
Signed-off-by: Masahiro Yamada
Reviewed-by: Simon Glass
---
Changes in v2:
- Remove unnecessary lines
script
This commit was generated by the following command:
scripts/fill_scrapyard.py
The commit-ID of CPCIISER4 removal has been fixed by hand because
the board was removed by commit 370572601027 (ppc4xx: remove CPCIISER4
board), but it was added to README.scrapyard by commit 9a4018e09a2f
(ppc4xx: r
Changes in v2:
- Remove unnecessary lines
- Rebased on commit 5f88ed5cde
Masahiro Yamada (2):
scripts: add a utility to fill blank fields of doc/README.scrapyard
README.scrapyard: fill commit and date fields
doc/README.scrapyard | 136 ++---
scripts
Hi Tom,
Do you think we can apply the ARM SPL patch early in this merge
window? There is your series for TI, then mine which sits on top. It
is possible that something may break, but if we do it now then there
is plenty of time to fix it.
I would really like to bring in the driver model SPL suppo
Hi Waldemar,
On 14.01.15 00:23, Waldemar Brodkorb wrote:
> Hi Andreas,
> Andreas Bießmann wrote,
>
> Yes, fileaddr and filesize seemed to be set correctly.
> Uboot> printenv
> baudrate=115200
> ethaddr=00:04:25:1C:5A:AC
> eth1addr=00:04:25:1C:5A:AD
> bootcmd=fsload;bootm
> bootdelay=3
> bootargs
Hi Andreas,
Andreas Bießmann wrote,
> Hi Waldemar,
>
> On 13.01.15 23:59, Waldemar Brodkorb wrote:
> > Hi Andreas,
> > Andreas Bießmann wrote,
> >
> >> Hi Waldemar,
> >>
> >> On 13.01.15 22:31, Waldemar Brodkorb wrote:
> >>> Hi U-Boot Hackers,
> >>>
> >>> I have some problem regarding DHCP on my
Hi Waldemar,
On 13.01.15 23:59, Waldemar Brodkorb wrote:
> Hi Andreas,
> Andreas Bießmann wrote,
>
>> Hi Waldemar,
>>
>> On 13.01.15 22:31, Waldemar Brodkorb wrote:
>>> Hi U-Boot Hackers,
>>>
>>> I have some problem regarding DHCP on my Atmel NGW100 board, when
>>> using dnsmasq on the server sid
Hi Andreas,
Andreas Bießmann wrote,
> Hi Waldemar,
>
> On 13.01.15 22:31, Waldemar Brodkorb wrote:
> > Hi U-Boot Hackers,
> >
> > I have some problem regarding DHCP on my Atmel NGW100 board, when
> > using dnsmasq on the server side. I want to use the device for some
> > kind of automatic test s
Hi Waldemar,
On 13.01.15 22:31, Waldemar Brodkorb wrote:
> Hi U-Boot Hackers,
>
> I have some problem regarding DHCP on my Atmel NGW100 board, when
> using dnsmasq on the server side. I want to use the device for some
> kind of automatic test suite runs.
>
> Does the support for this device is k
Just talkin' to myself here,
The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368:
Prepare v2015.01 (2015-01-12 09:39:08 -0500)
are available in the git repository at:
git://git.denx.de/u-boot-ti master
for you to fetch changes up to fa58b102cd8f5345cbc28657600c3a28a
On Fri, Jan 02, 2015 at 12:35:43AM +0100, Anthoine Bourgeois wrote:
> Signed-off-by: Anthoine Bourgeois
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lis
On Fri, Jan 02, 2015 at 12:35:42AM +0100, Anthoine Bourgeois wrote:
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Mon, Dec 22, 2014 at 04:26:15PM -0600, Felipe Balbi wrote:
> Make sure that all OPPs are checked on
> scale_vcores(). While at that also fix 600MHz
> VDD_MPU voltage according to AM437x Data Manual
> available at [1].
>
> Table 5-3 on that document, lists all valid
> voltages per frequency.
>
On Mon, Dec 22, 2014 at 04:26:11PM -0600, Felipe Balbi wrote:
> From: James Doublesin
>
> Switch to using hardware leveling for certain parameters on the EMIF
> rather than using precalculated values. Doing this also means we have a
> common place now between am437x and am335x for setting
> emi
On Sat, Dec 27, 2014 at 10:10:44PM +0300, matwey.korni...@gmail.com wrote:
> This patch adds boot script support to pcm051
>
> Signed-off-by: Matwey V. Kornilov
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital signature
_
On Mon, Dec 22, 2014 at 04:26:17PM -0600, Felipe Balbi wrote:
> AM43xx Industrial Development Kit is a new board
> based on AM437x line of SoCs. Targetted at Industrial
> Automation applications, it comes with EtherCAT, motor
> control and other goodies.
>
> Thanks to James Doublesin for all the
On Mon, Dec 22, 2014 at 04:26:13PM -0600, Felipe Balbi wrote:
> A switch statement fits better in this case,
> specially considering we have a few extra
> frequencies to use.
>
> Signed-off-by: Felipe Balbi
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Description: Digital signa
On Mon, Dec 22, 2014 at 04:26:14PM -0600, Felipe Balbi wrote:
> DCDC1 is used as VDD_MPU in all known boards,
> let's define all other valid voltages for that
> rail so it can be used by our boards.
>
> Signed-off-by: Felipe Balbi
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
De
On Mon, Dec 22, 2014 at 04:26:10PM -0600, Felipe Balbi wrote:
> From: James Doublesin
>
> Need to provide PLL values for all possible input frequencies (19.2, 24,
> 25, 26MHz). Values provide are also optimized for jitter (needed
> especially for PER PLL and DDR PLL).
>
> Signed-off-by: James D
On Mon, Dec 22, 2014 at 04:26:12PM -0600, Felipe Balbi wrote:
> From: James Doublesin
>
> The frequencies for 25MHz in dpll_per were out of spec for 25MHz,
> correct.
>
> Signed-off-by: James Doublesin
> Signed-off-by: Felipe Balbi
Applied to u-boot-ti/master, thanks!
--
Tom
signature.as
On Thu, Dec 04, 2014 at 11:27:05AM -0600, Cooper Jr., Franklin wrote:
> * Add netargs and netboot option.
> * This enables tftp and nfs booting
> * This puts omap5 devices inline with other devices such as am335x and am437x
>
> Signed-off-by: Franklin S Cooper Jr
Applied to u-boot-ti/master, th
On Tue, Jan 06, 2015 at 09:14:36AM -0600, Felipe Balbi wrote:
> This regulator is used with AM437x IDK to feed
> VDD_MPU, without means to scale VDD_MPU we can't
> support higher frequencies.
>
> Signed-off-by: Felipe Balbi
Applied to u-boot-ti/master, thanks!
--
Tom
signature.asc
Descripti
On Wed, Jun 25, 2014 at 02:43:32PM +0200, Daniel Mack wrote:
> Enable GPMC's prefetch feature for NAND access. This speeds up NAND read
> access a lot by pre-fetching contents in the background and reading them
> through the FIFO address.
>
> The current implementation has two limitations:
>
>
On Mon, Dec 22, 2014 at 04:26:10PM -0600, Felipe Balbi wrote:
> From: James Doublesin
>
> Need to provide PLL values for all possible input frequencies (19.2, 24,
> 25, 26MHz). Values provide are also optimized for jitter (needed
> especially for PER PLL and DDR PLL).
>
> Signed-off-by: James D
On Tue, Jan 13, 2015 at 10:21:06AM -0800, Simon Glass wrote:
> Hi Tom,
>
> I'm not sure of the process for a failed pull request. I have fixed up
> the offending patch (fdt: Add several apis to decode pci device node)
> and pushed to to x86/master.
>
>
> The following changes since commit 92fa7
Signed-off-by: Tom Rini
---
include/configs/am335x_evm.h |1 +
1 file changed, 1 insertion(+)
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 0004750..d5e84ab 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -239,6 +239,7 @@
#def
Hi Masahiro,
On 13 January 2015 at 11:13, Masahiro Yamada wrote:
> We are removing bunch of non-generic boards these days.
>
> Updating doc/README.scrapyard is a really tedious task, but it can
> be automated. I hope this tool will make our life easier.
>
> Signed-off-by: Masahiro Yamada
> ---
Hi U-Boot Hackers,
I have some problem regarding DHCP on my Atmel NGW100 board, when
using dnsmasq on the server side. I want to use the device for some
kind of automatic test suite runs.
Does the support for this device is known to work in 2015.01?
Can I update the old existing U-Boot boot loade
Hi Siarhei,
On 13 January 2015 at 04:30, Siarhei Siamashka
wrote:
> It is possible to enable pre-console buffer in SPL and later extract
> log messages from it when updating stdio consoles in u-boot.
>
> Signed-off-by: Siarhei Siamashka
> ---
> common/console.c | 65
> +
On 01/13/2015 01:40 AM, Sjoerd Simons wrote:
On Mon, 2015-01-12 at 12:44 -0600, Dennis Gilmore wrote:
On Mon, 12 Jan 2015 10:42:27 -0700
Stephen Warren wrote:
On 01/10/2015 11:27 AM, Dennis Gilmore wrote:
On Tue, 06 Jan 2015 17:43:19 -0700
Stephen Warren wrote:
(CCing Dennis so he can com
On Wed, Jan 14, 2015 at 04:13:24AM +0900, Masahiro Yamada wrote:
> Masahiro Yamada (2):
> scripts: add a utility to fill blank fields of doc/README.scrapyard
> README.scrapyard: fill commit and date fields
Yay, thanks!
--
Tom
signature.asc
Description: Digital signature
__
On Sun, 2015-01-11 at 20:34 +0100, Hans de Goede wrote:
> Hookup OTG USB controller support and enable the otg controller + USB-keyb
> on various tablets.
>
> This allows tablet owners to interact with u-boot without needing to solder
> a serial console onto their tablet PCB.
Looks good, except I
I will need mc_security_cfg0/1 in a future patch and I added the rest while
debugging, so thought I might as well commit them.
Signed-off-by: Ian Campbell
---
arch/arm/include/asm/arch-tegra124/mc.h | 35 +++--
1 file changed, 33 insertions(+), 2 deletions(-)
diff --
The secure world code is relocated to the MB just below the top of 4G, we
reserve it in the FDT (by setting CONFIG_ARMV7_SECURE_RESERVE_SIZE) but it is
not protected in h/w. See next patch.
Signed-off-by: Ian Campbell
---
(This was originally commit ed48864fb69d352291ed75d50a215d60864b021b in
htt
In this case the secure code lives in RAM, and hence needs to be reserved, but
it has been relocated, so the reservation of __secure_start does not apply.
Add support for setting CONFIG_ARMV7_SECURE_RESERVE_SIZE to reserve such a
region.
This will be used in a subsequent patch for Jetson-TK1
Sig
These registers can be used to prevent non-secure world from accessing a
megabyte aligned region of RAM, use them to protect the u-boot secure monitor
code.
At first I tried to do this from s_init(), however this inexplicably causes
u-boot's networking (e.g. DHCP) to fail, while networking under L
Hi Thierry,
I needed to boot my Jetson in NS mode (in order to boot Xen) and was
investigating the possibility of PSCI support when I discovered that you
had already started on it[0]. Hurrah!
I cherry-picked the relevant commit onto u-boot-tegra#master and added a
few more patches and now it boot
This commit was generated by the following command:
scripts/fill_scrapyard.py
Signed-off-by: Masahiro Yamada
---
I notice lots of ppc4xx boards are being removed.
I will send v2 later.
doc/README.scrapyard | 96 ++--
1 file changed, 48 ins
We are removing bunch of non-generic boards these days.
Updating doc/README.scrapyard is a really tedious task, but it can
be automated. I hope this tool will make our life easier.
Signed-off-by: Masahiro Yamada
---
scripts/fill_scrapyard.py | 168 +
Masahiro Yamada (2):
scripts: add a utility to fill blank fields of doc/README.scrapyard
README.scrapyard: fill commit and date fields
doc/README.scrapyard | 96 +-
scripts/fill_scrapyard.py | 168 ++
2 files changed
On Sun, 2015-01-11 at 20:34 +0100, Hans de Goede wrote:
> The axp221 / axp223's N_VBUSEN pin can be configured as an output rather
> then an input, and this is used on some boards to control usb-vbus0, add
> support for this.
>
> Signed-off-by: Hans de Goede
I wonder if we should expose this as
On Sun, 2015-01-11 at 20:34 +0100, Hans de Goede wrote:
> Signed-off-by: Hans de Goede
Acked-by: Ian Campbell
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Sun, 2015-01-11 at 20:34 +0100, Hans de Goede wrote:
> Most of the usb-controller init code found in ehci-sunxi.c also is necessary
> to init the otg usb controller, so move it to a common place.
>
> While at it also update various #ifdefs / defines for sun8i support.
>
> Signed-off-by: Hans d
On Sun, 2015-01-11 at 20:34 +0100, Hans de Goede wrote:
Acked-by: Ian Campbell
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Sun, 2015-01-11 at 20:34 +0100, Hans de Goede wrote:
> The voltage setting code knows it needs to call axp221_init before calling
> the various voltage setting functions.
>
> But users of axp utility functions like axp221_get_sid() do not know this,
> so the utility functions always call axp221
On Mon, Jan 12, 2015 at 10:47:29PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:27PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:33PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Tue, Jan 13, 2015 at 12:30:17PM +0200, Georgi Botev wrote:
> Signed-off-by: Georgi Botev
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mail
On Tue, Jan 13, 2015 at 12:15:55PM +0200, Georgi Botev wrote:
> Signed-off-by: Georgi Botev
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mail
On Tue, Jan 13, 2015 at 12:07:21PM +0200, Georgi Botev wrote:
> Signed-off-by: Georgi Botev
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mail
On Mon, Jan 12, 2015 at 10:47:35PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:32PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:28PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:34PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:30PM +0100, Matthias Fuchs wrote:
> only keep CPCI4052
>
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.
On Mon, Jan 12, 2015 at 10:47:31PM +0100, Matthias Fuchs wrote:
> - remove some obsolete code
> - switch to generic board
>
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U
On Mon, Jan 12, 2015 at 10:47:26PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:21PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:24PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:25PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:22PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:19PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:23PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:20PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:17PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:14PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:18PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:47:15PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
On Mon, Jan 12, 2015 at 10:33:38PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
> Acked-by: Stefan Roese
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.den
On Mon, Jan 12, 2015 at 10:47:16PM +0100, Matthias Fuchs wrote:
> Signed-off-by: Matthias Fuchs
Applied to u-boot/master, thanks!
--
Tom
signature.asc
Description: Digital signature
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/
Hi Tom,
I'm not sure of the process for a failed pull request. I have fixed up
the offending patch (fdt: Add several apis to decode pci device node)
and pushed to to x86/master.
The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368:
Prepare v2015.01 (2015-01-12 09:39:08
On Fri, Dec 19, 2014 at 05:34:31PM +0200, Lubomir Popov wrote:
> On the DRA72x (J6Eco) EVM one PMIC SMPS is powering three SoC
> core rails. This concept of using one SMPS to supply multiple
> core domains (in various, although limited combinations, per
> primary device use case) has now become co
On 01/13/2015 05:19 AM, Bhupesh Sharma wrote:
> This patch adds basic constructs in the ARMv8 u-boot code
> to handle and apply Cortex-A57 specific erratas.
>
> As and example, the framework showcases how erratas 826974 and
> 828024 can be handled and applied.
>
> Later on this framework can be e
On Fri, Jan 9, 2015 at 1:32 PM, Ian Molton wrote:
> Hi folks,
>
> I'm currently bringing up a new i.MX6q based board.
>
> I've got u-boot working, but its clear that a lot of the iMX stuff is still
> using the old configuration system.
Not sure which version you are using, but if you use 2015.01
On Tue, Jan 13, 2015 at 06:49:01PM +0300, Alexey Brodkin wrote:
> It makes sense to specify CONFIG_SYS_CLK_FREQ in "configs/xx_defconfig"
> instead of "include/configs/xxx.h" because then header will be reusable
> across boards with different CPU clocks.
>
> Also this nice to have an ability for
It makes sense to specify CONFIG_SYS_CLK_FREQ in "configs/xx_defconfig"
instead of "include/configs/xxx.h" because then header will be reusable
across boards with different CPU clocks.
Also this nice to have an ability for end user to tune this value
himself via "menuconfig".
For now I'm only app
Hi Tom,
On 13 January 2015 at 06:37, Tom Rini wrote:
> On Mon, Jan 12, 2015 at 05:06:19PM -0800, Simon Glass wrote:
>
>> Hi Tom,
>>
>> The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368:
>>
>> Prepare v2015.01 (2015-01-12 09:39:08 -0500)
>>
>> are available in the git r
On Tue, Jan 13, 2015 at 05:10:24PM +0300, Alexey Brodkin wrote:
> If for some reason DMA module fails to reset user oserves only this:
> --->---
> # dhcp
> Trying dwmac.e0018000
> FAIL
> --->---
>
> This message makes not much sense.
> With proposed change error message will be more helpful:
> --
This patch adds support for handling 828024 and 826974 erratas
for Cortex-A57 cores present on LS2085A SoC.
Signed-off-by: Bhupesh Sharma
---
include/configs/ls2085a_common.h |4
1 file changed, 4 insertions(+)
diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_com
On 12 January 2015 at 19:44, Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada
> Acked-by: Simon Glass
> ---
>
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> include/configs/uniphier.h | 3 +++
> 1 file changed, 3 insertio
On 12 January 2015 at 19:44, Masahiro Yamada wrote:
> This commit adds on-chip I2C driver used on newer SoCs of Panasonic
> UniPhier platform.
>
> Signed-off-by: Masahiro Yamada
> Reviewed-by: Simon Glass
> Acked-by: Simon Glass
> Acked-by: Heiko Schocher
Applied to u-boot-dm, thanks!
> ---
On 12 January 2015 at 19:44, Masahiro Yamada wrote:
> This commit adds on-chip I2C driver used on some old Panasonic
> UniPhier SoCs.
>
> Signed-off-by: Masahiro Yamada
> Reviewed-by: Simon Glass
> Acked-by: Simon Glass
> Acked-by: Heiko Schocher
> ---
>
> Changes in v6:
> - Pass (struct uni
On 12 January 2015 at 19:44, Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada
> Acked-by: Simon Glass
> ---
>
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> Changes in v2: None
>
> configs/ph1_ld4_defconfig | 2 ++
> configs/ph1_pro4_defconfig
On 12 January 2015 at 19:44, Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada
> Reviewed-by: Simon Glass
> Acked-by: Simon Glass
> Acked-by: Heiko Schocher
Applied to u-boot-dm, thanks!
> ---
>
> Changes in v6: None
> Changes in v5: None
> Changes in v4: None
> Changes in v3: None
> C
On 10 January 2015 at 10:06, Simon Glass wrote:
> Hi Nobuhiro,
>
> On 21 December 2014 at 21:22, Nobuhiro Iwamatsu
> wrote:
>> This adds driver model support with this driver. This was tested by Koelsch
>> board and Gose board.
>>
>> Signed-off-by: Nobuhiro Iwamatsu
>> Acked-by: Simon Glass
>>
Hi Masahiro,
On 27 November 2014 at 10:14, Simon Glass wrote:
> Hi Masahiro,
>
> On 27 November 2014 at 10:03, Masahiro Yamada
> wrote:
>> The common/board_r.c has show_model_r() to display the model name
>> if the DTB has a "model" property. It sounds useful to have a similar
>> function in c
On Mon, Jan 12, 2015 at 05:06:19PM -0800, Simon Glass wrote:
> Hi Tom,
>
> The following changes since commit 92fa7f53f1f3f03296f8ffb14bdf1baefab83368:
>
> Prepare v2015.01 (2015-01-12 09:39:08 -0500)
>
> are available in the git repository at:
>
> git://git.denx.de/u-boot-x86.git
>
> for
If for some reason DMA module fails to reset user oserves only this:
--->---
# dhcp
Trying dwmac.e0018000
FAIL
--->---
This message makes not much sense.
With proposed change error message will be more helpful:
--->---
# dhcp
Trying dwmac.e0018000
DMA reset timeout
FAIL
--->---
For example user m
This patch adds basic constructs in the ARMv8 u-boot code
to handle and apply Cortex-A57 specific erratas.
As and example, the framework showcases how erratas 826974 and
828024 can be handled and applied.
Later on this framework can be extended to include other
erratas.
Signed-off-by: Bhupesh Sh
1 - 100 of 118 matches
Mail list logo
