AP94 has several sources and I check u-boot.bin original from package, all of
them don't work
even recompile also, network still failure
I'm really confused where is the problem???
Vizio GPL
http://store.vizio.com/xwr100-routercodes
WRT400N GPL
http://sourceforge.net/projects/officialli
Hi,
From what I remember when working with imx6d, the ecspi controller had
a special behavior that it
insisted on toggling the CS line for each 8-bit transfer. U-Boot has a
workaround for this: using
additional pin as "bit-banged CS". Here's how it worked on a project of
mine:
static iomux_v
On Fri, 2014-04-11 at 17:09 +0200, Alexander Graf wrote:
> In QEMU we implement a PV machine type called "ppce500". That board is able
> to run any e500+ FSL cores (e500v2, e500mc, e5500, e6500).
>
> It is heavily inspired by the MPC8544DS SoC and board combination, but
> implements only the bare
Works like a charm now. Thanks for the update. U-Boot is awesome!
On Fri, Apr 11, 2014 at 6:39 AM, Fabio Estevam wrote:
> From: Fabio Estevam
>
> mx6slevk has a m25p32 SPI NOR flash connected to ESCSPI port.
>
> Add support for it.
>
> Signed-off-by: Fabio Estevam
> ---
> arch/arm/include/
Compilation has some warning below
In file included from
/home/dony71/Project/VIZIO_1.01.02/boot/u-boot-1.1.4/include/common.h:102,
from bzlib.c:2:
/home/dony71/Project/VIZIO_1.01.02/boot/u-boot-1.1.4/include/image.h:129:1:
warning: "CONFIG_LZMA" redefined
:5:1: warning: this is t
On Fri, 2014-04-04 at 17:31 +0900, Masahiro Yamada wrote:
> So my question is, what should we do to improve the performance?
> Is it a bad idea to use DMA?
>
>
> The sequence of page_read in this patch is like this:
> (1) Cache flush of DMA buffer area
> (2) DMA transfer from NAND device to DMA b
On Thursday, April 10, 2014 at 09:18:05 PM, Rob Herring wrote:
> From: Sebastian Siewior
>
> This patch adds support for the Android boot-image format. The header
> file is from the Android project and got slightly alterted so the struct +
> its defines are not generic but have something like a n
On Thursday, April 10, 2014 at 09:18:04 PM, Rob Herring wrote:
> From: Rob Herring
>
> Allow a NULL table to be passed to usb_gadget_get_string for cases
> when a string table may not be populated.
>
> Signed-off-by: Rob Herring
Acked-by: Marek Vasut
Best regards,
Marek Vasut
___
On Thursday, April 10, 2014 at 09:18:06 PM, Rob Herring wrote:
> From: Sebastian Siewior
[...]
> +++ b/doc/README.android-fastboot
> @@ -0,0 +1,86 @@
> +Android Fastboot
> +
> +
> +Overview
> +
> +The protocol that is used over USB is described in
> +README.android-fastboo
On Friday, April 11, 2014 at 02:55:31 PM, Rob Herring wrote:
> On Fri, Apr 11, 2014 at 2:14 AM, Bo Shen wrote:
> > Hi Rob Herring,
> >
> > I am just do a function testing on Atmel sama5d3xek board. And a small
> >
> > comment as following.
> >
> > Btw, do you test to transfer big size file.
Hi Jean-Luc,
On 1 April 2014 06:05, Jean-Luc BLANC wrote:
> This driver add support to STMicroelectronics ST33ZP24 I2C TPM.
>
See my comments on the SPI driver, some of which apply here.
>
> Signed-off-by: Jean-Luc BLANC
> ---
> README |7 +
> drivers/tpm/tpm_i2c_
Hi Jean-Luc,
On 1 April 2014 06:05, Jean-Luc BLANC wrote:
> Add the support of direct hash function in locality 4. hash_loc4()
> command added in TPM command set.
>
> Signed-off-by: Jean-Luc BLANC
>
A nit below, but otherwise:
Acked-by: Simon Glass
> ---
> README |
Hi Jean-Luc,
On 1 April 2014 05:48, Jean-Luc BLANC wrote:
> In order to support 2 SPI TPMs on same platform, add spi_select()
> to tpm command set. Selection is done at driver level to keep compatibility
> with standard tpm commands.
> ---
> README | 13
>
From: Fabio Estevam
ECSPI chipselect (MX6_PAD_EIM_D19__GPIO3_IO19) is used with GPIO functionality,
so it does not make sense to set its pad as SPI pin.
Signed-off-by: Fabio Estevam
---
Eric,
This is untested.
board/boundary/nitrogen6x/nitrogen6x.c | 2 +-
1 file changed, 1 insertion(+), 1 d
On Thu, Apr 10, 2014 at 12:52:49PM +0200, Andreas Bießmann wrote:
> These fixups are required for tricorder board to run with 2014.04.
>
> One big change is a different ecc layout which came in by Pekon Gupta's
> changes to the omap_gpmc driver. Another point was changed behaviour of
> omap_gpio
On Wed, Apr 09, 2014 at 08:10:43PM +0900, Masahiro Yamada wrote:
> In some use cases, SPL linker script was not updated even when
> it should be.
>
> For instance,
>
> $ make tricoder_config all
> [ build complete ]
> ... modify include/configs/tricoder.h
> $ make
>
> spl/u-boot-spl.l
On Wed, Apr 09, 2014 at 03:09:44PM +0200, Łukasz Majewski wrote:
> During switch to device tree, commit 1ecab0f has removed this code.
>
> INFORM4 and INFORM5 registers are used by TRATS2 first stage bootloader for
> providing recovery. For normal operation, those two must be cleared out.
>
> Th
Hi Jean-Luc,
On 1 April 2014 05:48, Jean-Luc BLANC wrote:
> This driver add support to STMicroelectronics ST33ZP24 SPI TPM.
>
> Signed-off-by: Jean-Luc BLANC
> ---
> README | 12 +
> drivers/tpm/Makefile |1 +
> drivers/tpm/tpm_spi_stm_st33.c | 671
> +++
On Fri, 2014-04-11 at 15:48 +0800, Xie Xiaobo wrote:
> Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before,
> but used "if (phydev->supported & SUPPORTED_Autoneg)" now.
> So assign "phydev->supported" to "phydev->drv->features" for ar8035
> to enable autonegotiation. Then r
From: Rob Herring
Enable CONFIG_SYS_GENERIC_BOARD on highbank.
Signed-off-by: Rob Herring
---
I meant to include this with the other config changes:
http://patchwork.ozlabs.org/patch/338286/
http://patchwork.ozlabs.org/patch/338285/
include/configs/highbank.h | 1 +
1 file changed, 1 insertio
mii is working, maybe some configuration missing
i'm not familiar with the code, so really needs some help from somebody
any hint?
--
View this message in context:
http://u-boot.10912.n7.nabble.com/AP94-u-boot-network-failure-tp177671p177857.html
Sent from the U-Boot mailing list archive at Na
Greetings,
On 04/11/2014 09:23 AM, Tran, Dang wrote:
Hi,
I'm running a PowerPC board that uses U-Boot and I get into this loop (see
terminal output below).
It doesn't matter how I get into this loop. What I really care about is how to
break out of it without manually resetting the board.
Is t
Hi,
I'm running a PowerPC board that uses U-Boot and I get into this loop (see
terminal output below).
It doesn't matter how I get into this loop. What I really care about is how to
break out of it without manually resetting the board.
Is there a way to break out of this loop and reset the syste
Hi Pantos, hi Tom,
I sent this a couple of months ago to the mailing list, never really received a
response. We are testing 2014.04-rc3 right now and the issue is still there.
Would you still consider bringing this fix in for the upcoming release?
This is for an eMMC chip with an initial memo
There is no need to set IVORs to anything but their default values,
so let's leave them where they are.
Suggested-by: Scott Wood
Signed-off-by: Alexander Graf
---
arch/powerpc/cpu/mpc85xx/cpu_init.c |4 --
arch/powerpc/cpu/mpc85xx/fixed_ivor.S| 63
We want to be able to directly execute the ELF binary without going
through the u-boot.bin one.
To know where we have to start executing this ELF binary we have to
tell the linker where our entry point is.
Signed-off-by: Alexander Graf
---
arch/powerpc/cpu/mpc85xx/u-boot.lds |1 +
1 file c
We already have a nice helper to give us a property cell value with default
fall back from a path. Split that into two helpers - one for the old path
based lookup and one to give us a value based on a node offset.
Signed-off-by: Alexander Graf
---
common/fdt_support.c | 38 +++
In QEMU we implement a PV machine type called "ppce500". That board is able
to run any e500+ FSL cores (e500v2, e500mc, e5500, e6500).
It is heavily inspired by the MPC8544DS SoC and board combination, but
implements only the bare minimum to make Linux happy enough to drive a
virtual machine.
Thi
This patch adds a helper function that can be used to interpret most
"ranges" properties in the device tree.
It reads the n'th range out of a "ranges" array and returns the node's
virtual address of the range, the physical address that range starts at
and the size of the range.
Signed-off-by: Ale
For KVM we have a special PV machine type called "ppce500". This machine
is inspired by the MPC8544DS board, but implements a lot less features
than that one.
It also provides more PCI slots and is supposed to be enumerated by
device tree only.
This patch adds support for the generic ppce500 mach
The DDR mapping function really is just a generic virtual -> physical
mapping function. Generalize it so it can support any virtual starting
offset and IO maps just the same.
Signed-off-by: Alexander Graf
---
v3 -> v4:
- change tlb_map to return unmapped size and get ram/io as enum rather
On 19.03.14 19:49, York Sun wrote:
On 02/20/2014 07:59 AM, Scott Wood wrote:
On Thu, 2014-02-20 at 13:52 +0100, Alexander Graf wrote:
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 3e99b07..51f2085 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/power
On Thu, Apr 10, 2014 at 02:18:07PM -0500, Rob Herring wrote:
> From: Rob Herring
>
> Enable Android Fastboot support on omap3_beagle board.
>
> Signed-off-by: Rob Herring
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digital signature
___
On Thu, Apr 10, 2014 at 02:18:06PM -0500, Rob Herring wrote:
> From: Sebastian Siewior
>
> This patch contains an implementation of the fastboot protocol on the
> device side and a little of documentation.
> The gadget expects the new-style gadget framework.
> The gadget implements the getvar, r
On Thu, Apr 10, 2014 at 02:18:05PM -0500, Rob Herring wrote:
> From: Sebastian Siewior
>
> This patch adds support for the Android boot-image format. The header
> file is from the Android project and got slightly alterted so the struct +
> its defines are not generic but have something like a na
On Thu, Apr 10, 2014 at 02:18:03PM -0500, Rob Herring wrote:
> From: Rob Herring
>
> Various commands that load images have no checks that a loaded image
> does not exceed the available RAM space and will happily continue
> overwriting u-boot or other RAM that should not be touched. Also,
> some
On Thu, Apr 10, 2014 at 02:18:04PM -0500, Rob Herring wrote:
> From: Rob Herring
>
> Allow a NULL table to be passed to usb_gadget_get_string for cases
> when a string table may not be populated.
>
> Signed-off-by: Rob Herring
Reviewed-by: Tom Rini
--
Tom
signature.asc
Description: Digit
On Thu, Apr 10, 2014 at 02:18:02PM -0500, Rob Herring wrote:
> From: Rob Herring
>
> I'm reviving the Android Fastboot support after 2+ years since the last
> posting[1]. The previous postings had some questions about licensing and
> source of some code. I believe I've traced the history suffi
On Fri, Apr 11, 2014 at 09:04:36AM +0200, Sebastian Andrzej Siewior wrote:
> On 04/10/2014 09:18 PM, Rob Herring wrote:
> > From: Rob Herring
> >
> > I'm reviving the Android Fastboot support after 2+ years since the last
> > posting[1]. The previous postings had some questions about licensing a
On 03/31/14 06:05, Masahiro Yamada wrote:
> Signed-off-by: Masahiro Yamada
> Cc: Mateusz Zalega
> Cc: Minkyu Kang
> ---
> board/samsung/goni/mem_setup.S | 249
> -
> board/samsung/smdkc100/mem_setup.S | 181 ---
> 2 files changed,
On Fri, Apr 11, 2014 at 2:14 AM, Bo Shen wrote:
> Hi Rob Herring,
> I am just do a function testing on Atmel sama5d3xek board. And a small
> comment as following.
>
> Btw, do you test to transfer big size file. I try a file bigger than
> 100MiB, it will hang. However use DFU or RNDIS don't mee
This sub-command adds support for the RPMB partition of an eMMC:
* mmc rpmb key
Programs the authentication key in the eMMC This key can not
be overwritten.
* mmc rpmb read <#count> [address of key]
Reads <#count> blocks of 256 bytes in the RPMB partition
beginning at block number . If t
This patch adds functions for read, write and authentication
key programming for the Replay Protected Memory Block partition
in the eMMC.
Signed-off-by: Pierre Aubert
CC: Pantelis Antoniou
---
drivers/mmc/Makefile |1 +
drivers/mmc/rpmb.c | 317 +++
This serie of patches adds some functions and a sub-command of 'mmc' for
programming the authentication key and for reading and writing the RPMB
partition of an eMMC according to the JEDEC standard No. 64-A441
The sub-command rpmb is enabled by the flag CONFIG_SUPPORT_EMMC_RPMB defined
in the
On Friday, April 11, 2014 at 01:39:43 PM, Fabio Estevam wrote:
> From: Fabio Estevam
>
> mx6slevk has a m25p32 SPI NOR flash connected to ESCSPI port.
>
> Add support for it.
>
> Signed-off-by: Fabio Estevam
Acked-by: Marek Vasut
Best regards,
Marek Vasut
___
On Fri, Apr 11, 2014 at 8:58 AM, Marek Vasut wrote:
> On Friday, April 11, 2014 at 01:39:43 PM, Fabio Estevam wrote:
>> From: Fabio Estevam
>>
>> mx6slevk has a m25p32 SPI NOR flash connected to ESCSPI port.
>>
>> Add support for it.
>
> So now the SPI works or is it still broken?
Works fine now
On Fri, Apr 11, 2014 at 10:05:35AM +, Alexey Brodkin wrote:
> Hi Tom,
>
> Now I have my own tree ("u-boot-arc") and I may commit there changes for
> ARC architecture.
>
> But I'm wondering if I may commit changes to boards I maintain in the
> same "u-boot-arc" repo as well?
> Currently these
On Friday, April 11, 2014 at 01:43:47 PM, Mateusz Zalega wrote:
> On 04/03/14 10:52, Marek Vasut wrote:
> Acked-by: Lukasz Majewski
> >>>
> >>> I suggest this goes for -next. Do you agree?
> >>
> >> I'm fine with this code going to -next. Thanks in advance.
> >
> > Hm, actually, I see we h
On Friday, April 11, 2014 at 01:39:43 PM, Fabio Estevam wrote:
> From: Fabio Estevam
>
> mx6slevk has a m25p32 SPI NOR flash connected to ESCSPI port.
>
> Add support for it.
So now the SPI works or is it still broken?
Best regards,
Marek Vasut
___
U
On 04/03/14 10:52, Marek Vasut wrote:
Acked-by: Lukasz Majewski
>>>
>>> I suggest this goes for -next. Do you agree?
>>
>> I'm fine with this code going to -next. Thanks in advance.
>
> Hm, actually, I see we have open issues with the 04/13 V2 patch (why don't
> you
> have default __weak u
From: Fabio Estevam
mx6slevk has a m25p32 SPI NOR flash connected to ESCSPI port.
Add support for it.
Signed-off-by: Fabio Estevam
---
arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 4
board/freescale/mx6slevk/mx6slevk.c| 20
include/configs/mx6slevk.h
On Thu, Apr 10, 2014 at 12:20 PM, Fabio Estevam wrote:
> On Thu, Apr 10, 2014 at 12:05 PM, Sam Catch wrote:
>> I hope this email is now in the right format.
>>
>> Hi All,
>>
>> I am trying to add support for the SPI NOR device on the Freescale
>> MCIMX6SLEVK Board. I have created a patch that s
Dear Matthias,
In message <5347bbbc.9000...@arcor.de> you wrote:
>
> we are currently trying to get an out-of-tree board based on 2013.01
> back in sync with current master and observing a strange behavior which
> we think is located in the CFI flash system. If we load an image via
> tftp, cop
Hello Shaveta Leekha,
Am 11.04.2014 10:41, schrieb Shaveta Leekha:
Most of the I2C slaves support accesses in the typical style
that is : read/write series of bytes at particular address offset.
These transactions look like:"
(1) START:Address:Tx:Offset:RESTART:Address[0..4]:Tx/Rx:data[0..n]:STO
Hi Tom,
Now I have my own tree ("u-boot-arc") and I may commit there changes for
ARC architecture.
But I'm wondering if I may commit changes to boards I maintain in the
same "u-boot-arc" repo as well?
Currently these are all in "board/synopsys" folder.
Or I need to send patches for my boards to
Hi
we are currently trying to get an out-of-tree board based on 2013.01
back in sync with current master and observing a strange behavior which
we think is located in the CFI flash system. If we load an image via
tftp, copy it to flash and then try to run the image via bootm we see an
error w
As some PHYs have non-standard PHY ID registers, PHY Id can't
be read correctly by current get_phy_id function, so we enable
get_phy_id redefinable to permit specific PHY driver having own
specific get_phy_id function.
Signed-off-by: Shengzhou Liu
---
v4: no change
v3: no change.
v2: use weak sty
Add support for Cortina CS4315/CS4340 10G PHY.
- This driver loads CS43xx firmware to initialize Cortina PHY.
- To define macro CONFIG_PHY_CORTINA will enable this driver.
- Cortina PHY has non-standard offset of PHY ID registers, so
define own get_phy_id().
Signed-off-by: Shengzhou Liu
---
v4:
Function "genphy_parse_link()" used "if (mii_reg & BMSR_ANEGCAPABLE)" before,
but used "if (phydev->supported & SUPPORTED_Autoneg)" now.
So assign "phydev->supported" to "phydev->drv->features" for ar8035
to enable autonegotiation. Then removed the genphy_config_aneg() function.
Signed-off-by: Xie
The fuse status register provides the values from on-chip
voltage ID efuses programmed at the factory.
These values define the voltage requirements for
the chip. u-boot reads FUSESR and translates the values
into the appropriate commands to set the voltage output
value of an external voltage regula
Adds Support for PowerOne ZM7300 voltage regulator.
This device is available on some Freescale Boards like B4860QDS
and has to be programmed to adjust the voltage on the board.
The device is accessible via I2C interface.
Signed-off-by: Shaveta Leekha
Signed-off-by: Poonam Aggrwal
---
board/fre
Most of the I2C slaves support accesses in the typical style
that is : read/write series of bytes at particular address offset.
These transactions look like:"
(1) START:Address:Tx:Offset:RESTART:Address[0..4]:Tx/Rx:data[0..n]:STOP"
However there are certain devices which support accesses in
terms
- update readme.
- add CONFIG_SYS_CORTINA_FW_IN_* for loading Cortina PHY CS4315
ucode from NOR/NAND/SPI/SD/REMOTE.
- update cpld vbank with SW3[5:7]=000 as default vbank0 instead of
previous SW3[5:7]=111 as default vbank.
Signed-off-by: Shengzhou Liu
---
board/freescale/t208xrdb/README
Add support of 2-stage NAND/SPI/SD boot loader using SPL framework.
PBL initializes the internal CPC-SRAM and copy SPL(96K) to it,
SPL further initializes DDR using SPD and environment and copy
u-boot from SPI/SD/NAND to DDR, finally SPL transfers control
to u-boot.
Signed-off-by: Shengzhou Liu
-
Add support of 2-stage NAND/SPI/SD boot loader using SPL framework.
PBL initializes the internal CPC-SRAM and copy SPL(96K) to it,
SPL further initializes DDR using SPD and environment and copy u-boot
from SPI/SD/NAND to DDR, finally SPL transfers control to u-boot.
Signed-off-by: Shengzhou Liu
-
On Friday, April 11, 2014 at 07:59:47 AM, Heiko Schocher wrote:
> add a possibility to add a medium specific polltimeout
> function. So it is possible to define different
> poll timeouts.
>
> Used on nand medium, for setting the DFU_MANIFEST_POLL_TIMEOUT
> only on nand ubi partitions, which is cur
On 11.04.2014 09:25, Pekon Gupta wrote:
This patch
omap-elm.c: replaces -ve integer value returned during errorneous condition,
with proper error-codes.
omap-gpmc.c: updates omap-gpmc driver to pass error-codes returned from
omap-elm driver to upper layers
Signed-
On 11.04.2014 09:25, Pekon Gupta wrote:
This patch tries to avoid some local pointer dereferences, by using common
local variables in omap_correct_data_bch()
Signed-off-by: Pekon Gupta
Reviewed-by: Stefan Roese
Thanks,
Stefan
___
U-Boot mailing l
On 11.04.2014 09:25, Pekon Gupta wrote:
This patch prepares to refactor 'struct nand_bch_priv' -> 'struct
omap_nand_info'
And thus performs following clean-ups:
- remove nand_bch_priv.type: use nand_bch_priv.ecc_scheme instead
- remove nand_bch_priv.mode:
Signed-off-by: Pekon Gupta
Revi
On 04/10/2014 09:18 PM, Rob Herring wrote:
> From: Rob Herring
>
> I'm reviving the Android Fastboot support after 2+ years since the last
> posting[1]. The previous postings had some questions about licensing and
> source of some code. I believe I've traced the history sufficiently that
> the
Hi Rob Herring,
I am just do a function testing on Atmel sama5d3xek board. And a
small comment as following.
Btw, do you test to transfer big size file. I try a file bigger than
100MiB, it will hang. However use DFU or RNDIS don't meet this issue.
On 04/11/2014 03:18 AM, Rob Herring wrot
Hi Rob,
Thanks for the patch. I've just glimpsed to them. I will provide a
thorough review in a near future (next week probably).
> This patch contains an implementation of the fastboot protocol on the
> device side and a little of documentation.
> The gadget expects the new-style gadget framewor
This patch renames 'struct nand_bch_priv' which currently holds private data
only
for BCH ECC schemes, into 'struct omap_nand_info' so that same can be used for
all ECC schemes
Signed-off-by: Pekon Gupta
Reviewed-by: Stefan Roese
---
drivers/mtd/nand/omap_gpmc.c | 58 --
This patch
omap-elm.c: replaces -ve integer value returned during errorneous condition,
with proper error-codes.
omap-gpmc.c: updates omap-gpmc driver to pass error-codes returned from
omap-elm driver to upper layers
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/oma
This patch tries to avoid some local pointer dereferences, by using common
local variables in omap_correct_data_bch()
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_gpmc.c | 10 +-
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/
This patch prepares to refactor 'struct nand_bch_priv' -> 'struct
omap_nand_info'
And thus performs following clean-ups:
- remove nand_bch_priv.type: use nand_bch_priv.ecc_scheme instead
- remove nand_bch_priv.mode:
Signed-off-by: Pekon Gupta
---
drivers/mtd/nand/omap_gpmc.c | 23 ++-
ELM hardware engine support ECC error detection for multiple ECC strengths like
+--++
|Type | ECC syndrome length|
+--++
|BCH4 | 6.5 bytes = 13 nibbles |
|BCH8 | 13 byte = 26 nibbles |
|BCH16 | 26 bytes = 52 nibbles |
+--+
This patch adds macros for following parameters of ELM Hardware engine
- ELM_MAX_CHANNELS: ELM can process 8 data streams simultaneously
- ELM_MAX_ERRORS: ELM can detect upto 16 ECC error when using BCH16 scheme
Signed-off-by: Pekon Gupta
Reviewed-by: Stefan Roese
---
include/linux/mtd/omap_e
*changes v1->v2*
[PATCH 2/7] fix for BCH4 and BCH16 ECC scheme
[PATCH 7/7]
- white space-clean up
*original v1*
This patch series
- removes un-wanted & redundant code in omap_elm and omap_gpmc drivers
- refactors some private struct in omap_gpmc to make them generic across
ecc-schemes
- min
There is no dependency of omap_elm.c on omap_gpmc.h
Signed-off-by: Pekon Gupta
Reviewed-by: Stefan Roese
---
drivers/mtd/nand/omap_elm.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
index 47b1f1b..4c65f3b 100644
--- a/drivers/mtd/n
Hi Heiko,
> Hello Lukasz,
>
> Am 10.04.2014 16:31, schrieb Lukasz Majewski:
> > Hi Heiko,
> >
> >> Hello Lukasz,
> >>
> >> Am 10.04.2014 12:08, schrieb Lukasz Majewski:
> >>> Hi Pantelis,
> >>>
> Hi Marek,
>
> On Apr 10, 2014, at 10:54 AM, Marek Vasut wrote:
>
> > On Thurs
81 matches
Mail list logo
