On Fri, Feb 3, 2012 at 10:24 AM, Albert ARIBAUD
wrote:
>>> On 2/1/12, Amit Virdi wrote:
I'm in the process of updating platform support for spear series of
SoC on the latest u-boot.
I picked u-boot v2011.12. I tried compiling for different spear boards
(spear 300, 310, 300 and
Compressing the logos with lzma rather than gzip saves ~9kb with the
Blackfin 24bit images and ~3kb with the 16bit images.
Add a new -l option to easylogo so people can pick lzma as their
decompression routine.
Signed-off-by: Mike Frysinger
---
tools/easylogo/easylogo.c | 85 +
This enables I2C on Seaboard.
Signed-off-by: Simon Glass
---
Changes in v3:
- Use CONFIG_TEGRA_I2C instead of CONFIG_TEGRA2_I2C
include/configs/seaboard.h |8
1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
inde
Change this name to fit with the current convention in the Tegra
header file.
Signed-off-by: Simon Glass
Acked-by: Stephen Warren
---
arch/arm/cpu/armv7/tegra2/ap20.c | 10 +-
arch/arm/cpu/armv7/tegra2/board.c |2 +-
arch/arm/include/asm/arch-tegra2/tegra2.h |
The Tegra 2x SOC has four ports, so define TEGRA_I2C_NUM_CONTROLLERS
in the shared config file.
Signed-off-by: Simon Glass
---
include/configs/tegra2-common.h |3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/include/configs/tegra2-common.h b/include/configs/tegra2-comm
Select the port ordering for I2C on Seaboard.
Signed-off-by: Simon Glass
---
Changes in v2:
- Disable port 2 as it is not used
Changes in v3:
- Move speed setting from tegra20.dtsi to board .dts file
board/nvidia/dts/tegra2-seaboard.dts | 21 +
1 files changed, 21 inserti
From: Yen Lin
Add basic i2c driver for Tegra2 with 8- and 16-bit address support.
The driver requires CONFIG_OF_CONTROL to obtain its configuration
from the device tree.
(Simon Glass: s...@chromium.org modified for upstream)
Signed-off-by: Simon Glass
---
Changes in v2:
- Adjust definitions to
This enables I2C on all Nvidia boards including Seaboard and
Harmony.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add build warning if CONFIG_SYS_I2C_INIT_BOARD is not defined
Changes in v3:
- Use CONFIG_TEGRA_I2C instead of CONFIG_TEGRA2_I2C
board/nvidia/common/board.c |7 +++
1 f
I2C ports have a 16-bit clock divisor. Add code to handle this special
case so that I2C speeds below 150KHz are supported.
Signed-off-by: Simon Glass
---
Changes in v3:
- Add new patch to support 16-bit clock divisors required by I2C
arch/arm/cpu/armv7/tegra2/clock.c | 63 +++
Some devices can deal with multiple compatible properties. The devices
need to know which nodes to bind to which features. For example an
I2C driver which supports two different controller types will want to
know which type it is dealing with in each case.
The new fdtdec_add_aliases_for_id() funct
Add U-Boot's peripheral clock information to the Tegra20 device tree file.
Signed-off-by: Simon Glass
---
Changes in v2:
- Adjust definitions to fit new peripheral clock bindings
- Change 'speed' to 'clock-frequency'
- Remove u-boot,pinmux binding (sadly)
Changes in v3:
- Move speed setting from
This series brings in an I2C driver for Tegra which can be
configured by a flat device tree.
It supports 8- and 16-bit addresses and both the normal I2C ports and
the DVC port (for controlling the power management unit (PMU)).
Recent Linux bindings are used, based on example .dts files found in
b
Hi Stephen,
On Fri, Feb 3, 2012 at 4:41 PM, Stephen Warren wrote:
> On 02/03/2012 05:36 PM, Simon Glass wrote:
>> Hi Stephen,
>>
>> On Fri, Feb 3, 2012 at 4:25 PM, Stephen Warren wrote:
>>> On 02/03/2012 05:19 PM, Simon Glass wrote:
Hi Stephen,
On Fri, Feb 3, 2012 at 4:14 PM, Step
On 02/03/2012 05:36 PM, Simon Glass wrote:
> Hi Stephen,
>
> On Fri, Feb 3, 2012 at 4:25 PM, Stephen Warren wrote:
>> On 02/03/2012 05:19 PM, Simon Glass wrote:
>>> Hi Stephen,
>>>
>>> On Fri, Feb 3, 2012 at 4:14 PM, Stephen Warren wrote:
On 02/03/2012 04:24 PM, Simon Glass wrote:
> Hi
Hi Stephen,
On Fri, Feb 3, 2012 at 4:25 PM, Stephen Warren wrote:
> On 02/03/2012 05:19 PM, Simon Glass wrote:
>> Hi Stephen,
>>
>> On Fri, Feb 3, 2012 at 4:14 PM, Stephen Warren wrote:
>>> On 02/03/2012 04:24 PM, Simon Glass wrote:
Hi Stephen,
On Thu, Jan 19, 2012 at 12:56 PM, St
On 02/03/2012 05:19 PM, Simon Glass wrote:
> Hi Stephen,
>
> On Fri, Feb 3, 2012 at 4:14 PM, Stephen Warren wrote:
>> On 02/03/2012 04:24 PM, Simon Glass wrote:
>>> Hi Stephen,
>>>
>>> On Thu, Jan 19, 2012 at 12:56 PM, Stephen Warren wrote:
On 01/12/2012 12:00 PM, Simon Glass wrote:
> S
Hi Stephen,
On Fri, Feb 3, 2012 at 4:14 PM, Stephen Warren wrote:
> On 02/03/2012 04:24 PM, Simon Glass wrote:
>> Hi Stephen,
>>
>> On Thu, Jan 19, 2012 at 12:56 PM, Stephen Warren wrote:
>>> On 01/12/2012 12:00 PM, Simon Glass wrote:
Select the port ordering for I2C on Seaboard.
On 02/03/2012 04:24 PM, Simon Glass wrote:
> Hi Stephen,
>
> On Thu, Jan 19, 2012 at 12:56 PM, Stephen Warren wrote:
>> On 01/12/2012 12:00 PM, Simon Glass wrote:
>>> Select the port ordering for I2C on Seaboard.
>>>
>>> Signed-off-by: Simon Glass
>>> Acked-by: Stephen Warren
>>
>> This isn't t
Hi Heiko,
On Jan 14, 2012 11:28 PM, "Heiko Schocher" wrote:
>
> Hello Simon,
>
> Simon Glass wrote:
> > Add tegra_i2c_get_dvc_bus_num() to obtain the I2C bus number of DVC bus.
> > This allows us to talk to the PMU.
> >
> > Signed-off-by: Simon Glass
> > ---
> > Changes in v2:
> > - Add patch to
Hi Stephen,
On Mon, Jan 23, 2012 at 10:25 AM, Stephen Warren wrote:
> On 01/22/2012 10:41 AM, Simon Glass wrote:
>> Hi Stephen,
>>
>> On Thu, Jan 19, 2012 at 12:51 PM, Stephen Warren wrote:
>>> On 01/12/2012 12:00 PM, Simon Glass wrote:
Add U-Boot's peripheral clock information to the Tegra
Hi Stephen,
On Thu, Jan 19, 2012 at 1:08 PM, Stephen Warren wrote:
> On 01/12/2012 12:00 PM, Simon Glass wrote:
>> From: Yen Lin
>>
>> Add basic i2c driver for Tegra2 with 8- and 16-bit address support.
>> The driver requires CONFIG_OF_CONTROL to obtain its configuration
>> from the device tree.
Hi Stephen,
On Thu, Jan 19, 2012 at 12:56 PM, Stephen Warren wrote:
> On 01/12/2012 12:00 PM, Simon Glass wrote:
>> Select the port ordering for I2C on Seaboard.
>>
>> Signed-off-by: Simon Glass
>> Acked-by: Stephen Warren
>
> This isn't the patch that I ack'd.
Sorry, I added the disable.
>
>
Hi Stephen,
On Thu, Jan 12, 2012 at 11:14 AM, Stephen Warren wrote:
> Simon Glass wrote ednesday, January 11, 2012 9:18 PM:
>> On Mon, Jan 9, 2012 at 2:07 PM, Stephen Warren wrote:
>> > On 12/26/2011 11:11 AM, Simon Glass wrote:
>> >> From: Yen Lin
>> >>
>> >> Add basic i2c driver for Tegra2 wi
Hi Simon,
Le 18/01/2012 20:31, Simon Glass a écrit :
[+TI maintainers, tx25 board maintainer]
Hi Albert,
For ARM, a new arch/arm/lib/proc.S file is created, which holds generic
ARM assembler code (things that cannot be written in C and are common
functions used by all ARM CPUs). This helps r
On Friday 03 February 2012 11:05:57 Chander Kashyap wrote:
> board/samsung/smdk5250/tools/mkexynos_image.c | 117
> create mode 100644 tools/mksmdk5250spl.c
something funky in your diffstat ... says you're creating tools/ but the
diffstat shows board/.../tools/. but the diff below looks correc
On Friday 03 February 2012 11:19:22 Stefano Babic wrote:
> On 03/02/2012 12:34, Mike Frysinger wrote:
> > On Thursday 26 January 2012 04:21:21 Stefano Babic wrote:
> >> On 26/01/2012 00:40, Joe Hershberger wrote:
> I have a basic question about your patchset. RFC3927 requires
> that addre
On Fri, Feb 3, 2012 at 1:17 PM, Albert ARIBAUD
wrote:
> Hi,
>
> I am slowly catching up on my e-mail, so...
>
> Le 11/01/2012 00:24, Tom Rini a écrit :
>>
>> A hawkboard conversion is pending Albert ack'ing/commenting on a
>> generic ARM fixup.
>
>
> Can you point me to this patch series? I'll loo
Hi Stephen,
On Fri, Feb 3, 2012 at 12:03 PM, Stephen Warren wrote:
> Simon Glass wrote at Friday, February 03, 2012 10:08 AM:
>> This adds clock references to the USB part of the device tree for U-Boot,
>> and marks USB1 as supporting legacy mode (which we disable in the driver).
>>
>> The USB ti
Hi vk,
Le 31/01/2012 10:27, vk a écrit :
Hi all,
Currently I am testing the Flash memory by using "Write and Read the
same pattern" method (Protecting the UBoot Flash Sectors).
Is it safer to test flash memory during bootup?what if power gets off during
process?
I want to know whether there
Le 01/02/2012 19:24, Michael Walle a écrit :
The decompressor expects the L2 cache to be disabled. This fixes booting
some kernels, which have CONFIG_ARM_PATCH_PHYS_VIRT enabled.
Signed-off-by: Michael Walle
Acked-by: Prafulla Wadaskar
Cc: Albert ARIBAUD
Cc: Prafulla Wadaskar
Cc: Wolfgang Denk
-
Hi Vladimir,
Le 12/01/2012 00:12, Vladimir Zapolskiy a écrit :
This change adds complete support for Starterkit SK-AT91SAM9/SIM508
board.
Signed-off-by: Vladimir Zapolskiy
Cc: Albert ARIBAUD
Cc: Wolfgang Denk
---
Changes from v1 to v2:
* make use of setbits_le32() and similar helpers
* phy addr
Sorry for the late answer, Jilin.
Le 13/01/2012 01:18, Jilin Zhou a écrit :
Hi Albert,
Thanks for the reply. My host environment is Mac. Our company has a cross
compiler toolchain for armv7.
The commands I run are as follows:
1. export CROSS_COMPILE=ntoarmv7-
2. make omap4_panda_config
3. ma
Hi,
I am slowly catching up on my e-mail, so...
Le 11/01/2012 00:24, Tom Rini a écrit :
A hawkboard conversion is pending Albert ack'ing/commenting on a
generic ARM fixup.
Can you point me to this patch series? I'll look it up as soon as possible.
Amicalement,
--
Albert.
Simon Glass wrote at Friday, February 03, 2012 10:08 AM:
> This adds clock references to the USB part of the device tree for U-Boot,
> and marks USB1 as supporting legacy mode (which we disable in the driver).
>
> The USB timing information may vary between boards sometimes, but for
> now we hard-
Simon Glass wrote at Friday, February 03, 2012 10:08 AM:
> We set up two USB ports, one of which can be host or device.
> For some reason the kernel version does enable both ports.
>
> Signed-off-by: Simon Glass
Acked-by: Stephen Warren
--
nvpublic
___
Hi Simon,
Le 03/02/2012 20:30, Simon Glass a écrit :
Hi Albert,
On Fri, Feb 3, 2012 at 11:00 AM, Albert ARIBAUD
wrote:
Hi Simon,
Le 15/01/2012 02:20, Simon Glass a écrit :
Hi,
Hmmm patman found a tag in this commit and tried to send it to Fred
Bloggs. I have added the line below - sorry
Hi David,
Le 09/01/2012 08:23, "David Müller (ELSOFT AG)" a écrit :
Hello
Any news?
Adding Minkyu.
Amicalement,
--
Albert.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Albert,
On Fri, Feb 3, 2012 at 11:00 AM, Albert ARIBAUD
wrote:
> Hi Simon,
>
> Le 15/01/2012 02:20, Simon Glass a écrit :
>
>> Hi,
>>
>> Hmmm patman found a tag in this commit and tried to send it to Fred
>> Bloggs. I have added the line below - sorry for the confusion.
>>
>> On Sat, Jan 14, 2
Hi Simon,
Le 15/01/2012 02:20, Simon Glass a écrit :
Hi,
Hmmm patman found a tag in this commit and tried to send it to Fred
Bloggs. I have added the line below - sorry for the confusion.
On Sat, Jan 14, 2012 at 5:12 PM, Simon Glass wrote:
What is this?
=
This tool is a Python s
Hi Tom,
Le 02/02/2012 19:10, Tom Rini a écrit :
Hello,
The following changes since commit 78936e6d110bbcfe6db3406456c16a7a174ae031:
Tom Rini (1):
OMAP3: Correct get_sdr_cs_offset mask
are available in the git repository at:
git://git.denx.de/u-boot-ti.git master
Dechesne, Nico
Hi Amit,
Le 03/02/2012 07:57, Amit Virdi a écrit :
Adding Albert now...
... but the wrong (old) address though :)
On 2/3/12, Amit Virdi wrote:
Albert,
Any suggestions?
Thanks
Amit Virdi
On 2/1/12, Amit Virdi wrote:
Hi All,
I'm in the process of updating platform support for spear ser
We set up two USB ports, one of which can be host or device.
For some reason the kernel version does enable both ports.
Signed-off-by: Simon Glass
---
Changes in v2:
- Remove 0x from fdt aliases
- Use "okay" instead of "ok" for fdt node status
Changes in v3:
- Disable USB2 which is not used on S
This adds clock references to the USB part of the device tree for U-Boot,
and marks USB1 as supporting legacy mode (which we disable in the driver).
The USB timing information may vary between boards sometimes, but for
now we hard-code it in C. This is because all current T2x boards use
the same v
Hi Stephen,
On Thu, Feb 2, 2012 at 2:17 PM, Stephen Warren wrote:
> On 01/24/2012 04:21 PM, Simon Glass wrote:
>> This switches Seaboard over to use FDT for run-time config instead of
>> CONFIG options. USB is the only user at present.
>>
>> Signed-off-by: Simon Glass
>
> Aside from the issues I
Hi Stephen,
On Thu, Feb 2, 2012 at 2:07 PM, Stephen Warren wrote:
> On 01/24/2012 04:21 PM, Simon Glass wrote:
>> This adds clock references to the USB part of the device tree for U-Boot.
>>
>> The USB timing information may vary between boards sometimes, but for
>> now we hard-code it in C. This
Hi Stephen,
On Thu, Feb 2, 2012 at 1:55 PM, Stephen Warren wrote:
> On 01/24/2012 04:21 PM, Simon Glass wrote:
>> This adds a property to indicate a port which can switch between host and
>> device
>> mode.
> ...
>> diff --git a/doc/device-tree-bindings/usb/tegra-usb.txt
>> b/doc/device-tree-bi
On 03/02/2012 12:34, Mike Frysinger wrote:
> On Thursday 26 January 2012 04:21:21 Stefano Babic wrote:
>> On 26/01/2012 00:40, Joe Hershberger wrote:
I have a basic question about your patchset. RFC3927 requires
that addresses are continuosly checked to avoid conflicts -
this is a st
SMDK5250 board is based on Samsungs EXYNOS5250 SoC.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- This patch is bifurcated into borad support and SoC support
- Fixed typo: s/EEYNOS/EXYNOS
- Squashed patch "SMDK5250: enable device tree support" in this.
Changes for v
This patch adds support for MMC SPL booting.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
Changes for v6:
- None
Changes for v7:
- None
Changes for v8:
- Moved
Samsung's ARM Cortex-A15 based SoCs are known as Exynos5 series of
SoCs. This patch adds the support for Exynos5.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- This patch was part of "EXYNOS: Add SMDK5250 board support"
- Now it is seprated as SoC support.
Changes for v3:
CONFIG_SYS_CLK_FREQ_C210 macro giving notion of S5PC2XX (Exynos4)
architecture. Replace CONFIG_SYS_CLK_FREQ_C210 with CONFIG_SYS_CLK_FREQ
to make it generic for exynos architecture.
Signed-off-by: Chander Kashyap
---
Changes for v2:
- None
Changes for v3:
- None
Changes for V4:
This patchset add support for Samsung's SMDK5250 board based on
EXYNOS5250 based SoC. It also adds support for MMC SPL booting.
The porting is done by Samsung engineers at HQ in System LSI Team.
I am contributing in upstreaming the code for the board.
Based upon discussions following patches are
Dear "Hadli, Manjunath",
In message you
wrote:
>
> > NAK. This has been discussed a thousand times before, so please look it
> up in the archives.
> >
> > The environment always has precedence. If there are several places to sto
> re tha MAC address, and the values don;t match, a warning must
On Fri, Feb 3, 2012 at 6:38 AM, Govindraj.R wrote:
> From: "Govindraj.R"
>
> Clean up ehci-omap added and make it generic to extend support for omap4 socs.
> Adds omap-ulpi-viewport for ulpi access from ehci-omap.
> Adds ehci support for omap4-panda.
>
> Based on latest denx master branch commit:
On Thursday 02 February 2012 08:42:17 Manjunath Hadli wrote:
> --- a/board/davinci/da8xxevm/da850evm.c
> +++ b/board/davinci/da8xxevm/da850evm.c
>
> int misc_init_r(void)
> {
> dspwake();
> +
> +#ifdef CONFIG_MAC_ADDR_IN_SPIFLASH
> + uchar buff[8];
> + int ret;
> +
> + if (!eth_
> On 03.02.2012 14:22, Marek Vasut wrote:
> >> This patch fixes booting i.MX28 CPUs via USB download.
> >> In this mode the CPU's bootrom implements a USB HID device that
> >> accepts a bootstream.
> >>
> >> When downloading the bootstream via USB, first the SPL code is
> >> received and executed.
> > Make it an array?
>
> If that works for you, it works for me. Thanks!
>
> #define __mx28_reg_8(name) \
> uint8_t name##[4]; \
> uint8_t name##[4]_set; \
> uint8_t name##[4]_clr; \
> uint8_t name##[4]_tog;
Might be
__
On 03.02.2012 14:22, Marek Vasut wrote:
>> This patch fixes booting i.MX28 CPUs via USB download.
>> In this mode the CPU's bootrom implements a USB HID device that
>> accepts a bootstream.
>>
>> When downloading the bootstream via USB, first the SPL code is
>> received and executed. Then the u-boo
> Make it an array?
If that works for you, it works for me. Thanks!
#define __mx28_reg_8(name) \
uint8_t name##[4]; \
uint8_t name##[4]_set; \
uint8_t name##[4]_clr; \
uint8_t name##[4]_tog;
__
> > Awesome. So after reading your replies, let's just rename mx28_reg to
> > mx28_reg_32 and introduce mx28_reg_8 for this particular problem.
>
> You were probably already foreseeing this when you made your
> suggestion to use accessors, but now I'm working it I see introducing
> mx28_reg_8 may
> Awesome. So after reading your replies, let's just rename mx28_reg to
> mx28_reg_32 and introduce mx28_reg_8 for this particular problem.
You were probably already foreseeing this when you made your
suggestion to use accessors, but now I'm working it I see introducing
mx28_reg_8 may get too mess
From: Ilya Yanok
Taken from Beagle code. Tested on mcx board (AM3517-based).
Signed-off-by: Ilya Yanok
---
board/ti/beagle/beagle.c | 101 --
drivers/usb/host/Makefile |1 +
drivers/usb/host/ehci-omap.c | 156
From: "Govindraj.R"
Adding ehci clock enabling mechanism part of clock framework.
When essential clocks are enabled during init phase usb host
clocks can also be enabled from clock framework.
Signed-off-by: Govindraj.R
---
arch/arm/cpu/armv7/omap3/board.c|4
arch/arm/cpu/a
From: "Govindraj.R"
usb dpll configuration is done only part of non-essential
dppl configuration however if CONFIG_USB_EHCI_OMAP is defined
we may have to configure usb dpll's for proper functioning
of usb modules. So move the usb dppl configuration to a new func.
and utilise the same during esse
From: "Govindraj.R"
For beagle and panda enable and use the ehci-omap.c generic
api's added to configure usb host ports based on data passed
from board file to configure in modes as specified from board data.
For panda initialise the mux pins for ehci usage.
Signed-off-by: Govindraj.R
---
boar
From: "Govindraj.R"
Clean up ehci-omap added and make it generic to extend support for omap4 socs.
Adds omap-ulpi-viewport for ulpi access from ehci-omap.
Adds ehci support for omap4-panda.
Based on latest denx master branch commit:
137703b811502dfea364650fb3e17f20b4c21333
Changes from
From: "Govindraj.R"
Based on discussion from this thread [1].
Adding omap-view port that helps us in using the generic ulpi
framework for any ulpi phy ops using the INSNREG05_ULPI viewport
reg available on omap platform.
Currently ehci ports are available on omap3/4 platforms so enable the same
From: "Govindraj.R"
Clean up added ehci-omap.c and make it generic for re-use across
omap-soc having same ehci ip block. Also pass the modes to be configured
from board file and configure the ports accordingly. All usb layers
are not cache aligned, till then keep cache off for usb ops as ehci wil
From: "Govindraj.R"
Extend the existing ulpi viewport framework
to pass the port number information for any ulpi
ops. Fix the usage of ulpi api's accordingly.
Tested-by: Stefano Babic
Signed-off-by: Govindraj.R
---
board/efikamx/efikamx-usb.c | 24 ++--
drivers/usb/ulpi/ulp
Wolfgang,
On Fri, Feb 03, 2012 at 03:47:47, Wolfgang Denk wrote:
> Dear Manjunath Hadli,
>
> In message <1328190138-5276-3-git-send-email-manjunath.ha...@ti.com> you
> wrote:
> > add support to read mac address for AM18x EVM manufactured from
> > Spectrum digital which have mac address stored i
> This patch fixes booting i.MX28 CPUs via USB download.
> In this mode the CPU's bootrom implements a USB HID device that
> accepts a bootstream.
>
> When downloading the bootstream via USB, first the SPL code is
> received and executed. Then the u-boot image is received and
> called.
>
> The US
On 02/03/12 14:50, Govindraj wrote:
[...]
>>>
>>> COBJS := $(COBJS-y)
>>> SRCS := $(COBJS:.o=.c)
>>> diff --git a/drivers/usb/ulpi/omap-ulpi-viewport.c
>>> b/drivers/usb/ulpi/omap-ulpi-viewport.c
>>> new file mode 100644
>>> index 000..1718788
>>> --- /dev/null
>>> +++ b/drivers/usb/ulpi/o
pata_bfin.c: In function 'bfin_ata_identify':
pata_bfin.c:887:2: warning: format '%x' expects type 'unsigned int',
but argument 2 has type 'lbaint_t'
Signed-off-by: Mike Frysinger
---
drivers/block/pata_bfin.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/driv
musb_hcd.c: In function 'musb_submit_rh_msg':
musb_hcd.c:827:2: warning: format '%d' expects type 'int',
but argument 3 has type 'long unsigned int'
Signed-off-by: Mike Frysinger
---
drivers/usb/musb/musb_hcd.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/dri
Tom,
On Thu, Feb 02, 2012 at 22:18:09, Tom Rini wrote:
> On Thu, Feb 2, 2012 at 6:53 AM, Manjunath Hadli
> wrote:
> > Add 'clocks' command to print various frequencies such as ARM
> > frequency, DSP core frequency and DDR frequency. Remove
> > print_cpuinfo() function as it is no longer require
On Sun, Jan 29, 2012 at 5:12 PM, Stefano Babic wrote:
> On 29/01/2012 10:42, Igor Grinberg wrote:
>> Hi Govindraj,
>>
>
> Hi all,
>
>> Put Remy on Cc.
>
> Remy resigned as USB maintainer - but Tom is aware about these patches...
>
>>
>> Note: my new mail client for some reason, messes with white s
This patch fixes booting i.MX28 CPUs via USB download.
In this mode the CPU's bootrom implements a USB HID device that
accepts a bootstream.
When downloading the bootstream via USB, first the SPL code is
received and executed. Then the u-boot image is received and
called.
The USB bootmode is inte
Fixed! Patch follows.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hi Igor,
Sorry for late reply, Was really busy with some other tasks.
On Sun, Jan 29, 2012 at 3:12 PM, Igor Grinberg wrote:
> Hi Govindraj,
>
> Put Remy on Cc.
>
Yes Sure,
> Note: my new mail client for some reason, messes with white spaces...
> (Thunderbird (9) just gets better and better...
On Thursday 19 January 2012 19:53:31 Joe Hershberger wrote:
> --- a/drivers/net/netconsole.c
> +++ b/drivers/net/netconsole.c
>
> +#define DEBUG_DEV_PKT 0
wouldn't be better to move these to net.h by default rather than copying &
pasting to all the source files ?
-mike
signature.asc
Descriptio
On Thursday 19 January 2012 19:53:30 Joe Hershberger wrote:
> Cisco's arp-proxy feature fails to ignore the link-local address range
> This means that a link-local device on a network with this Cisco
>equipment will reply to ARP requests for our device (in addition
>to our reply)
> ...
> --
On Thursday 19 January 2012 19:53:29 Joe Hershberger wrote:
> --- a/README
> +++ b/README
>
> - CONFIG_CMD_PCMCIA * PCMCIA support
> + CONFIG_CMD_PCMCIA * PCMCIA support
please omit unrelated whitespace changes
> --- a/common/cmd_net.c
> +++ b/common/cm
On Thursday 19 January 2012 19:53:28 Joe Hershberger wrote:
> --- a/README
> +++ b/README
>
> + CONFIG_BOOTP_CAN_FAIL - If the DHCP server is not found
> + after the configured retry count, the call will fail
> + instead of starting over. This can be used to fai
On Thursday 19 January 2012 19:53:25 Joe Hershberger wrote:
> --- a/include/net.h
> +++ b/include/net.h
>
> -extern int NetLoop(enum proto_t);
> +extern int NetLoop(enum proto_t protocol);
explicit variable names are unnecessary when the type is self explanatory
> --- a/net/net.c
> +++ b/net/n
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
> Hi,
>
> > you're only writing data to the register, not clearing them. So maybe
> > some bits remain set?
>
> The assignment will work here. There're only 8 bits, of which 6 are the
> fractional divider, one is de read-only stable indicator (unaffected by
> writes) and the last one is the gatin
On Thursday 19 January 2012 19:53:22 Joe Hershberger wrote:
> --- a/common/cmd_net.c
> +++ b/common/cmd_net.c
>
> +#if !defined(CONFIG_BOOTP_SERVERIP)
> if (NetServerIP) {
> ip_to_string (NetServerIP, tmp);
> setenv ("serverip", tmp);
> }
> +#endif
please ad
On Thursday 19 January 2012 19:53:21 Joe Hershberger wrote:
> --- a/net/net.c
> +++ b/net/net.c
>
> +int
> +NetUpdateEther(struct Ethernet_t *et, uchar *addr, uint prot)
> +{
> + ushort protlen;
> +
> + memcpy(et->et_dest, addr, 6);
> + memcpy(et->et_src, NetOurEther, 6);
> + protl
Hi Mike,
On 3 February 2012 02:51, Mike Frysinger wrote:
> On Thursday 02 February 2012 04:11:27 Chander Kashyap wrote:
>> --- /dev/null
>> +++ b/board/samsung/smdk5250/tools/mkexynos_image.c
>
> tools should be in tools/. there are already plenty of examples in there (see
> tools/msxboot.c as t
On Thursday 19 January 2012 19:53:20 Joe Hershberger wrote:
> Only call the handlers if one was registered... don't require
>protocols to register a handler (eliminating dummies)
> NetConsole now uses the ARP handler when waiting on arp (instead of
>needing a #define hack in arp.c)
> Clear
> Hi,
>
> > this is how the imx-bootlets does it though. It's likely that FSL wants
> > the PLL0 to run from XTAL when doing power configuration?
>
> I was using the FLS bootlets as a reference too, but I have noticed a
> number of 'mistakes' in that code. For example:
> - Busy-indicators aren't
On Thursday 19 January 2012 19:53:19 Joe Hershberger wrote:
> Changes to NetState now go through an accessor function called
> NetSetState()
i'm not sure i see the value here. all i see is overhead being added. if you
really want this to be an improvement, there's two minor tweaks to make.
> -
On Thursday 19 January 2012 19:53:18 Joe Hershberger wrote:
> Use this entry-point consistently across the net/ code
i like this, but i'd like it even more if NetSendPacket() was a static inline
in the header. all this func does is jump straight to eth_send():
01fa2054 <_NetSendPacket>:
1fa205
On Tuesday 24 January 2012 02:15:41 Joe Hershberger wrote:
> On Tue, Jan 24, 2012 at 1:05 AM, Simon Glass wrote:
> > On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger wrote:
> >> - debug("Transmitting DHCPREQUEST packet: len = %d\n", pktlen);
> >> #ifdef CONFIG_BOOTP_DHCP_REQUEST_DELAY
> >>
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
On Tuesday 24 January 2012 01:19:14 Simon Glass wrote:
> On Thu, Jan 19, 2012 at 4:53 PM, Joe Hershberger wrote:
> > Rename parameter len to payload_len in NetSendUDPPacket: this name
> > more explicitly claims that it does not include the header size
> > Rename CDPHandler to CDPReceive: this is
On Thursday 19 January 2012 19:53:13 Joe Hershberger wrote:
> --- a/include/net.h
> +++ b/include/net.h
>
> -#define E802_HDR_SIZE22 /* 802 ethernet header size
> */
> + /* 802.2 + SNAP + ethernet header size */
> +#define E802_HDR_SIZE
Acked-by: Mike Frysinger
-mike
signature.asc
Description: This is a digitally signed message part.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
1 - 100 of 130 matches
Mail list logo
