Re: [U-Boot] U-BOOT TFTP

sorry about my wrong post ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] U-BOOT TFTP

Hi Can u give a clear log about uboot version and what u getting after executing "tftp 100 /tftpboot/uImage". Regards Vignesh Rajendran ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Linux 2.6.34.6 ethernet setup

Dear simran gill, In message you wrote: Hello,I am running Linux 2.6.34.6 on p4080ds board. I am trying to get the interfaces running on the kernel but it does not seem to be ... Please post on a LInux related mailing list. You are totally off topic here. Best regards, Wolfgang Denk -- DEN

[U-Boot] [PATCH v3 01/02] cosmetic: arm: lib/board.c: Coding Style cleanup

Signed-off-by: Heiko Schocher Acked-by: Detlev Zundel cc: Albert Aribaud cc: cc: Wolfgang Denk --- changes for v2: Added Acked-by from Detlev Zundel Added comments from Albert Aribaud: - fixed some Codingstyle issues - changed subject title Added comment from macp...@gmail.com:

[U-Boot] HELLO

HELLO How are you today, Hope all is well with you and your family? My name is Miss Happiness However it really pleases me to write you for a lovely and sincere friendship even if we haven’t met or seen each other before. I will be so much appreciate to see your reply soon so that i can give you

[U-Boot] Best Learn in PHP-XML

All Courses for Free Blogger PHP XHTML CSS for Designers

[U-Boot] U-BOOT TFTP

Sorry about my last post. I am new and need some help. Hello,I am developing on freescale P4080DS BOARD. I am trying to put new kernel image onto the board but need a tftp connection. When I type "tftp 100 /tftpboot/uImage" nothing happens and the new prompt appears. I was able to tftp

[U-Boot] U-BOOT TFTP

Hello,I am running Linux 2.6.34.6 on p4080ds board. I am trying to get the interfaces running on the kernel but it does not seem to be working. So far I am able to set up the ipaddress etc for the interface "fm1-gb1" but still cannot ping the outside world. I edited the file /etc/rc.d/rc.conf w

[U-Boot] Linux 2.6.34.6 ethernet setup

Hello,I am running Linux 2.6.34.6 on p4080ds board. I am trying to get the interfaces running on the kernel but it does not seem to be working. So far I am able to set up the ipaddress etc for the interface "fm1-gb1" but still cannot ping the outside world. I edited the file /etc/rc.d/rc.conf w

Re: [U-Boot] [PATCH 2/3] board/tqm85xx: Clean up PPC_DDR_WIMGE define logic in config file

Dear Becky Bruce, In message <13107687401917-git-send-email-bec...@kernel.crashing.org> you wrote: > The way I wrote this in the first time was based on the original > code, but I used a karnaugh map to make it a bit easier to > read. There should be no functional change. Ummm... > #if def

[U-Boot] [PATCH 2/3] board/tqm85xx: Clean up PPC_DDR_WIMGE define logic in config file

The way I wrote this in the first time was based on the original code, but I used a karnaugh map to make it a bit easier to read. There should be no functional change. Signed-off-by: Becky Bruce --- include/configs/TQM85xx.h |7 ++- 1 files changed, 6 insertions(+), 1 deletions(-)

[U-Boot] [PATCH 1/3] powerpc/mpc85xx: Add clear_ddr_tlbs function

This is useful when we just want to wipe out the TLBs. There's currently a function that resets the ddr tlbs to a different value; it is changed to utilize this function. The new function can be used in conjunction with setup_ddr_tlbs() for a board to temporarily map/unmap the DDR address range a

[U-Boot] [PATCH 3/3] board/tqm85xx: Create and tear down TLB for get_ram_size()

We need a TLB entry to call get_ram_size(); the common code doesn't create one until *after* fixed_sdram() has determined the size. So we set up tlbs for the max possible size and tear them down once we're done with get_ram_size(); the common 85xx code will then set up a final set of tlb entries f

[U-Boot] [PATCH 0/3] powerpc/85xx: Fix TQM8560 DDR boot issue

Series to fix the TQM85xx issue reported by Wolfgang the problem turned out to be that those boards use get_ram_size(), which requires that a TLB entry be set up for the DDR region. My earlier patches changed the way this was done and broke this. I've created a new function, clear_ddr_tlbs(),

[U-Boot] [PATCH] powerpc/85xx: Fix detection of P1017E

Had a typo such that P1017E would be detected correctly. Signed-off-by: Kumar Gala --- arch/powerpc/cpu/mpc8xxx/cpu.c |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 85ebcc9..767bc52 100644 --- a/arch

[U-Boot] Get these great inspirational books and songs

Hi, “The determination to explore new ways of doing things, especially by reading important life changing books, easily brings about a sustainable progressive and successful life” --G.P.I. Among these great highly motivational and inspirational books are;- ‘WAYS OF ATTAINING BUSINESS SUCCE

Re: [U-Boot] [PATCH v1 (WIP) 00/16] [Timer]API Rewrite

On 7/15/2011 11:34 AM, Wolfgang Denk wrote: > Dear "J. William Campbell", > > In message<4e208227.6010...@comcast.net> you wrote: >> If the I2C protocol must be available before interrupts are >> available, then udelay must be used. In the above examples, there are >> some loops in i2c and

[U-Boot] uboot not responding to ping to ubuntu

Hi All, I am facing a very strange problem. I have a MINI2440 SBC which I am connecting to my laptop with Ubuntu11.04. I have downloaded the Uboot configured for mini2440 and its version is 1.3.2. I have successfully transferred the Uboot code on the SBC. But when I am trying to do a TFTP from the

Re: [U-Boot] [PATCH v1 (WIP) 00/16] [Timer]API Rewrite

Dear "J. William Campbell", In message <4e208227.6010...@comcast.net> you wrote: > >If the I2C protocol must be available before interrupts are > available, then udelay must be used. In the above examples, there are > some loops in i2c and spi that appear to be waiting a full second. I

Re: [U-Boot] [PATCH v1 (WIP) 00/16] [Timer]API Rewrite

On 7/15/2011 12:17 AM, Wolfgang Denk wrote: > Dear "J. William Campbell", > > In message<4e1f8127.8030...@comcast.net> you wrote: >> I am pretty sure that is long enough for someone to notice. . I would be >> interested in seeing an example of such code as you refer to. Could you >> point me to on

Re: [U-Boot] eldk5.0 generate illegal instruction for at91rm9200

Dear zzs, In message <20110715161531.ga5...@greatfirst.com> you wrote: > > Today I found the "wrong code" : Thanks again for the feedback. I have documented this issue in the ELDK FAQ section: http://www.denx.de/wiki/view/ELDK-5/QuestionsAndAnswers#GCC_generates_illegal_opcodes_fo Best regard

[U-Boot] My partners and I need a good partner some one we can trust

It is risk free and legal ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] eldk5.0 generate illegal instruction for at91rm9200

Dear zzs, In message <20110715161531.ga5...@greatfirst.com> you wrote: > > Today I found the "wrong code" : Very well - thanks. > and the __udivsi3 contain the "wrong code" : > > 20111cfc <__udivsi3>: > 20111cfc: e2512001subsr2, r1, #1 ; 0x1 > 20111d00: 012fff1e

[U-Boot] [PATCH] sf: winbond: Add support for the Winbond W25X40

The Winbond W25X40 is now being used in the IP02 (and possibly IP04). Tested and working on the actual device. --- drivers/mtd/spi/winbond.c |8 1 files changed, 8 insertions(+), 0 deletions(-) diff --git a/drivers/mtd/spi/winbond.c b/drivers/mtd/spi/winbond.c index e8d30ae..4ab197f

[U-Boot] eldk5.0 generate illegal instruction for at91rm9200

> > > So what compiler options should be use? I notice some u-boot compile > > commandline has option '-march=armv4'. Why with this option it is still > > generate wrong code > > Thi sis a strong statement, based on somewhat weak facts. Why are you > so sure that there is any "wrong code" being ge

[U-Boot] [RFC PATCH v2 2/9] spl: add initial support for a generic SPL framework

Signed-off-by: Aneesh V Signed-off-by: Daniel Schwierzeck --- Changes since RFC v1: added documentation for SPL README | 36 doc/README.SPL | 59 spl/.gitignore |4 ++ spl/Makefile | 101 ++

[U-Boot] [RFC PATCH v2 3/9] Extend build-system for SPL framework

Signed-off-by: Aneesh V Signed-off-by: Daniel Schwierzeck --- Changes since RFC v1: make garbage collect of unused sections unconditionally for SPL Makefile |3 ++- config.mk | 34 +- 2 files changed, 35 insertions(+), 2 deletions(-) diff --git a/Makefil

Re: [U-Boot] Ping command

Hi Wolfgang, Thanks , ping is working the problem was with routing of the Tx clock. Thanks & Reagrds, Smitha Please do not print this email unless it is absolutely necessary. The information contained in this electronic message and any attachments to this message are intended for the exclus

Re: [U-Boot] [PATCH v2] Let source cross-reference targets follow symbolic links

Hi Horst, > From: Horst Kronstorfer > > Without telling 'find' to follow symbolic links, files under include/asm > and arch/$(ARCH)/include/asm/arch are not added to the indexing file list. > > Signed-off-by: Horst Kronstorfer > > Changes for v2: > - Apply this change to all source cross-ref

Re: [U-Boot] [PATCH 4/4] cmd_mac: fix help for 'mac read'

Michael Jones writes: > In the only implementation of 'mac read', it doesn't display the > contents of the eeprom as the help indicated unless compiled with > DEBUG. It only re-reads the contents of the EEPROM into memory. > Displaying the contents of the EEPROM is done by passing no > arguments

Re: [U-Boot] [PATCH 3/4] cmd_mac: cleanup help

Michael Jones writes: > Signed-off-by: Michael Jones Acked-by: Detlev Zundel -- It's bad civic hygiene to build technologies that could someday be used to facilitate a police state. No matter what the eavesdroppers and censors say, these systems put us all at greater risk. Communications

Re: [U-Boot] [PATCH 2/4] altera: fix printf typo

Michael Jones writes: > Signed-off-by: Michael Jones Acked-by: Detlev Zundel -- Windows Vista? And what a vista! All you see as you look around your garden is a 60foot high brick wall -- Crosbie Fitch. -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munic

Re: [U-Boot] [PATCH 1/4] cosmetic

Hi Michael, > Signed-off-by: Michael Jones Acked-by: Detlev Zundel Cheers Detlev -- There are two hard things in computer science: cache invalidation, naming things, and off-by-one errors. -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office:

Re: [U-Boot] [RFC PATCH v1 0/9] Prototype for generic SPL framework

Dear Wolfgang, On Thu, Jul 14, 2011 at 10:25 PM, Wolfgang Denk wrote: > Dear Daniel Schwierzeck, > > In message > <1310569869-31810-1-git-send-email-daniel.schwierz...@googlemail.com> you > wrote: >> This patch series is the final proposal from Aneesh and myself for a >> generic SPL framework.

Re: [U-Boot] [RFC PATCH v1 6/9] scaled down version of generic libraries for SPL

Hi Simon, On Fri, Jul 15, 2011 at 2:41 PM, Aneesh V wrote: > Hi Simon, > > On Friday 15 July 2011 06:01 PM, Simon Schwarz wrote: >> >> Hi Daniel, >> >> at the moment I'am playing a bit with your patch. >> >> I stumbled over this: >>> >>> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile

Re: [U-Boot] [RFC PATCH v1 6/9] scaled down version of generic libraries for SPL

On Friday 15 July 2011 06:40 PM, Simon Schwarz wrote: > Hi Aneesh, > >>> at the moment I'am playing a bit with your patch. >>> >>> I stumbled over this: diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index d31321a..300c8fa 100644 --- a/arch/arm/lib/Makefile +++

Re: [U-Boot] [RFC PATCH v1 6/9] scaled down version of generic libraries for SPL

Hi Aneesh, >> at the moment I'am playing a bit with your patch. >> >> I stumbled over this: >>> >>> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile >>> index d31321a..300c8fa 100644 >>> --- a/arch/arm/lib/Makefile >>> +++ b/arch/arm/lib/Makefile >>> @@ -26,6 +26,7 @@ include $(TOPDIR)/c

Re: [U-Boot] [PATCH v2 0/7]Timer: Simplify API

Hi Wolfgang, On 15/07/11 22:15, Graeme Russ wrote: > This patch series is the first 'logical' half of the previous series titled > '(WIP) [Timer]API Rewrite' which was a 16 part series > > This half (the first half) of the original series is a simplification of > the existing API designed to corr

Re: [U-Boot] [PATCH V3 3/4] ARM: Warn when the machine ID isn't set.

On 07/14/2011 09:02 PM, Igor Grinberg wrote: >> +#ifdef DEBUG >> +if (machid == BI_ARCH_NUMBER_INVALID) >> +printf("Warning: machid not set.\n"); >> +#endif >> + > > Is it essential to enclose that check in #ifdef DEBUG? > IMHO, it can be useful also with no DEBUG defined, > so I'

Re: [U-Boot] [RFC PATCH v1 6/9] scaled down version of generic libraries for SPL

Hi Simon, On Friday 15 July 2011 06:01 PM, Simon Schwarz wrote: > Hi Daniel, > > at the moment I'am playing a bit with your patch. > > I stumbled over this: >> diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile >> index d31321a..300c8fa 100644 >> --- a/arch/arm/lib/Makefile >> +++ b/arch/a

Re: [U-Boot] [RFC PATCH v1 6/9] scaled down version of generic libraries for SPL

Hi Daniel, at the moment I'am playing a bit with your patch. I stumbled over this: > diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile > index d31321a..300c8fa 100644 > --- a/arch/arm/lib/Makefile > +++ b/arch/arm/lib/Makefile > @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk >  LIB    = $

[U-Boot] [PATCH v2 7/7]Timer: Remove reset_timer_masked()

In some circumstances, reset_timer_masked() was called be timer_init() in order to perform architecture specific timer initialisation. In such cases, the required code in reset_timer_masked() has been moved into timer_init() --- Changes since v1 ((WIP) [Timer]API Rewrite): - Rebased to 68d4230c3cc

[U-Boot] [PATCH v2 6/7]Timer: Fix at91rm9200/spi.c timer usage

--- Changes since v1 ((WIP) [Timer]API Rewrite): - Rebased to 68d4230c3ccce96a72c5b99e48399bf1796fe3c6 arch/arm/cpu/arm920t/at91rm9200/spi.c |5 +++-- 1 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/arm920t/at91rm9200/spi.c b/arch/arm/cpu/arm920t/at91rm9200/spi.c

[U-Boot] [PATCH v2 5/7]Timer: Remove reset_timer() for non-Nios2 arches

--- Changes since v1 ((WIP) [Timer]API Rewrite): - Rebased to 68d4230c3ccce96a72c5b99e48399bf1796fe3c6 arch/arm/cpu/arm1136/mx31/timer.c|5 - arch/arm/cpu/arm1136/mx35/timer.c|5 - arch/arm/cpu/arm1136/omap24xx/timer.c|5 - arch/arm/cpu/arm1176/s3c64xx

[U-Boot] [PATCH v2 4/7]Timer: Allow reset_timer() only for systems with low resolution timers

--- Changes since v1 ((WIP) [Timer]API Rewrite): - Rebased to 68d4230c3ccce96a72c5b99e48399bf1796fe3c6 - Introduce new #define CONFIG_SYS_LOW_RES_TIMER drivers/block/mg_disk.c |2 ++ drivers/mtd/cfi_flash.c |4 include/configs/PCI5441.h |1 + include/confi

[U-Boot] [PATCH v2 3/7]Timer: Remove set_timer completely

--- Changes since v1 ((WIP) [Timer]API Rewrite): - Rebased to 68d4230c3ccce96a72c5b99e48399bf1796fe3c6 - Updated description arch/arm/cpu/arm1136/mx31/timer.c|5 - arch/arm/cpu/arm1136/mx35/timer.c|4 arch/arm/cpu/arm1136/omap24xx/timer.c|5 - arch/a

[U-Boot] [PATCH v2 2/7]Timer: Remove calls to set_timer outside arch/

There is no need to use set_timer(). Replace with appropriate use of get_timer() Signed-off-by: Graeme Russ --- Sorry Wolfgang, but this patch has been through a few versions before it got integrated into the larger Timer API hence the v1->v2->v1 debacle. checkpatch complains about long lines a

[U-Boot] [PATCH] MAINTAINERS: integrator+versatile boards

- Take maintainership of the unlisted integratorap board - Orphan the boards maintained by Peter Pearse, as he has retired from ARM Cc: Philippe Robin Signed-off-by: Linus Walleij --- MAINTAINERS | 11 ++- 1 files changed, 6 insertions(+), 5 deletions(-) diff --git a/MAINTAINERS b/

[U-Boot] [PATCH v2 0/7]Timer: Simplify API

This patch series is the first 'logical' half of the previous series titled '(WIP) [Timer]API Rewrite' which was a 16 part series This half (the first half) of the original series is a simplification of the existing API designed to correct a few 'implementation errors' and prepare the U-Boot tree

Re: [U-Boot] [PATCH] integratorap: remove hardcoded 32MB memory cmdline

Hi Linus, Wolfgang, On Fri, Jul 15, 2011 at 11:34 AM, Linus Walleij wrote: >> On Thu, Jul 14, 2011 at 8:03 PM, Linus Walleij wrote: >> > On Thu, Jul 14, 2011 at 1:44 PM, Wolfgang Denk wrote: >> > >> >>> --- a/include/configs/integratorap.h >> >>> +++ b/include/configs/integratorap.h >> >> >> >>

Re: [U-Boot] Ping command

Hi Wolfgang, I solved the unknow device issue by enabling the CONFIG_ETHER_ON_FCC1 in my config. Will check the TX clock configuration. Currently getting the blow messages. It says using the FCC1 ETHERNET. ping 172.16.52.60 Trying FCC1 ETHERNET pram_ptr->fen_genfcc.fcc_rbase 03efcc88 pram_ptr->f

[U-Boot] [PATCH 2/2] DA8xx: add generic GPIO driver

Add a generic GPIO driver for the DaVinci DA8xx processors. It is turned on by defining CONFIG_DA8XX_GPIO and fulfills the generic GPIO interface specified in . The driver has support for both manipulating GPIO pins as well as automatically configuring the pin multiplexor registers to set the pin

[U-Boot] [PATCH 1/2] DaVinci: rename gpio_defs.h to gpio.h

In preparation for a generic GPIO driver for the DA8xx processors, rename to and fix up all files which include it. Signed-off-by: Laurence Withers --- arch/arm/include/asm/arch-davinci/gpio.h | 66 + arch/arm/include/asm/arch-davinci/gpio_defs.h | 66 -

[U-Boot] [PATCH 0/2] DA8xx: add generic GPIO driver

This adds a generic GPIO driver fulfilling the interface for the TI DaVinci DA8xx CPU. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH 2/4] DA8xx: add MMC/SD controller addresses

Signed-off-by: Laurence Withers --- arch/arm/include/asm/arch-davinci/hardware.h |2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h index df3f549..d5d4211 100644 --- a/arch/arm/incl

[U-Boot] [PATCH 3/4] DA8xx: switch an enum to defines for consistency

There are two main sets of LPSC constants, depending on the processor family. The DA8xx constants were given in an enum whereas the non-DA8xx constants were preprocessor defines. This commit switches the DA8xx constants to defines for consistency. Signed-off-by: Laurence Withers --- arch/arm/in

[U-Boot] [PATCH 1/4] DaVinci EMAC: declare function for all DA8xx CPUs

The function davinci_emac_mii_mode_sel() is defined in board/davinci/common/misc.c for any DA8xx CPU which has CONFIG_DRIVER_TI_EMAC enabled. However, the prototype was only being declared in for the DA850 EVM board. This patch declares it for all DA8xx CPUs where CONFIG_DRIVER_TI_EMAC is enabled.

[U-Boot] [PATCH 4/4] DA8xx: fix LPSC constants

Some of the LPSC constants were incorrect, and some were missing. This commit fixes the incorrect constants (which were not used anywhere in the tree) and adds all constants for both DA830 and DA850, as per the TI datasheets. Signed-off-by: Laurence Withers --- arch/arm/include/asm/arch-davinci/

[U-Boot] [PATCH 0/4] DaVinci/DA8xx cleanups

Some general cleanup patches for the DaVinci/DA8xx CPUs made in preparation for porting to a new board based on the DA850. ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] Ping command

Dear smitha.va...@wipro.com, please stop top posting/ full quoting. You can find hints here: http://www.netmeister.org/news/learn2quote.html In message <07acdfb8eca8ef47863a613bc01bbb22032bc...@hyd-mkd-mbx02.wipro.com> you wrote: > > I get the below messages. Its failing in the fec_send BD_ENE

[U-Boot] [PATCH v3] miiphy: use strncpy() not sprintf()

In miiphy_register() the new device's name was initialised by passing a string parameter as the format string to sprintf(). As this would cause problems if it ever contained a '%' symbol, switch to using strncpy() instead. Signed-off-by: Laurence Withers Cc: Andy Fleming --- Changes for v2: - U

Re: [U-Boot] [PATCH] miiphy: use strncpy() not sprintf()

On Fri, Jul 15, 2011 at 09:21:45AM +, Laurence Withers wrote: > In miiphy_register() the new device's name was initialised by passing a > string parameter as the format string to sprintf(). As this would cause > problems if it ever contained a '%' symbol, switch to using strncpy() > instead. M

[U-Boot] No gpio.h file

Dear Wolfgang, There is no "asm/gpio.h" file available in U-Boot 2011.06 release. So generic gpio framework is being created now?? Regards, Ajay Bhargav ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [PATCH 2/2] i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)

Hi Minkyu, > > + > > +#ifdef CONFIG_SOFT_I2C > > + > > +enum { I2C_PMIC, I2C_NUM, }; > > What purpose of these enum? > Where these used? For now goni reference target is going to use only one I2C bus (implemented as soft_i2c GPIO). Therefore this enum will be erased for v2. In the future, howe

Re: [U-Boot] [PATCH] integratorap: remove hardcoded 32MB memory cmdline

On Thu, Jul 14, 2011 at 8:03 PM, Linus Walleij wrote: > On Thu, Jul 14, 2011 at 1:44 PM, Wolfgang Denk wrote: > >>> --- a/include/configs/integratorap.h >>> +++ b/include/configs/integratorap.h >> >> Please make sure to Cc: the board maintainer! > > Aw yes, that's one thing. Peter, are you still

[U-Boot] [PATCH v2] Let source cross-reference targets follow symbolic links

From: Horst Kronstorfer Without telling 'find' to follow symbolic links, files under include/asm and arch/$(ARCH)/include/asm/arch are not added to the indexing file list. Signed-off-by: Horst Kronstorfer Changes for v2: - Apply this change to all source cross-reference targets --- Makefi

[U-Boot] [RESEND PATCH] gpio:samsung s5p_ suffix add for GPIO functions

This change is driven by need of general gpio_* functions, which as their parameter are accepting the GPIO pin number, NOT block and pin. This makes the code alike to omap, and allows for using more generic frameworks (e.g. software I2C). Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Pa

Re: [U-Boot] [PATCH v4] scb9328: Add ARM relocation support

On 07/15/2011 11:16 AM, 'Torsten Koschorrek ' wrote: > From: Torsten Koschorrek > > This patch fixes compiler errors due to missing definitions of > CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR. > > It also does some cleanup: CONFIG_SYS_TEXT_BASE was moved to scb9328.h, > obsolete config.mk

Re: [U-Boot] [PATCH 2/2] i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)

Dear Lukasz Majewski, On 11 July 2011 17:18, Lukasz Majewski wrote: > Signed-off-by: Lukasz Majewski > Cc: Minkyu Kang > --- >  arch/arm/include/asm/arch-s5pc1xx/gpio.h |    2 + >  board/samsung/goni/goni.c                |   55 > +- >  include/configs/s5p_goni.h  

Re: [U-Boot] [PATCH 1/2] gpio:s5p s5p_ suffix add for GPIO functions

Dear Lukasz Majewski, On 11 July 2011 17:18, Lukasz Majewski wrote: > This change is driven by need of general gpio_* functions, > which as their parameter are accepting the GPIO pin number, NOT > block and pin. > > This makes the code alike to omap, and allows for using I2C software > generic fr

Re: [U-Boot] [PATCH 1/2] integratorap: disable dcache

On Fri, Jul 15, 2011 at 9:42 AM, Heiko Schocher wrote: >> Heiko, Alessandro, do you have any hints on how to go about flushing >> and disabling the D-cache in bootm for ARM920T? It doesn't seem to >> work on this ARM CPU chip in its current form... > > Hmm.. trying bootm with actual u-boot on a d

Re: [U-Boot] [PATCH 1/2] integratorap: disable dcache

Hi Laurence, On Friday 15 July 2011 10:54:41 Laurence Withers wrote: > On Fri, Jul 15, 2011 at 09:42:53AM +0200, Heiko Schocher wrote: > > Hmm.. trying bootm with actual u-boot on a davinci (arm926ejs) based > > board, there I couldn;t use the Davinci-EMAC (if I disable the dcache > > it works ...

[U-Boot] [PATCH v4] scb9328: Add ARM relocation support

From: Torsten Koschorrek This patch fixes compiler errors due to missing definitions of CONFIG_SYS_SDRAM_BASE and CONFIG_SYS_INIT_SP_ADDR. It also does some cleanup: CONFIG_SYS_TEXT_BASE was moved to scb9328.h, obsolete config.mk was removed. The scb9328 board has 1 DRAM bank, so don't ask for m

[U-Boot] [PATCH] miiphy: use strncpy() not sprintf()

In miiphy_register() the new device's name was initialised by passing a string parameter as the format string to sprintf(). As this would cause problems if it ever contained a '%' symbol, switch to using strncpy() instead. Signed-off-by: Laurence Withers Cc: Andy Fleming --- Changes for v2: - U

Re: [U-Boot] [PATCH] miiphy: use strcpy() not sprintf()

On Thu, Jul 14, 2011 at 02:02:42PM -0400, Mike Frysinger wrote: > On Thursday, July 14, 2011 09:49:23 Albert ARIBAUD wrote: > > Please use strncpy() which will also guard against overflows. > > or BUG_ON(strlen(name) >= MDIO_NAME_LEN) > -mike Patch v3 has both. The original code did have a check

[U-Boot] [PATCH 6/7] ARMV7: OMAP: I2C driver: Write more than 1 byte at a time in i2c_write

This allows the EEPROM layer to send a single i2c write command per page, and wait CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS between i2c write commands. Signed-off-by: Michael Jones --- drivers/i2c/omap24xx_i2c.c | 134 ++- 1 files changed, 56 insertions(+),

[U-Boot] [PATCH 4/7] mmc: rescan fails on empty slot

Fail in 'mmc rescan' if mmc_init() returns error Signed-off-by: Michael Jones --- common/cmd_mmc.c |6 -- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 176646d..28918f6 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -165

[U-Boot] [PATCH 5/7] mv_common.c: don't compile reset_environment if ENV_IS_NOWHERE

Doesn't make sense to provide this function to boards which defined CONFIG_ENV_IS_NOWHERE. Such a board gets a linking error because common/env_nowhere.c doesn't define saveenv(). Signed-off-by: Michael Jones --- board/matrix_vision/common/mv_common.c |2 ++ 1 files changed, 2 insertions(+),

[U-Boot] [PATCH 3/7] ARMV7: OMAP3: Add 37xx ESx revision numbers.

From: "Howard D. Gray" Signed-off-by: Michael Jones --- arch/arm/cpu/armv7/omap3/sys_info.c | 13 - arch/arm/include/asm/arch-omap3/omap3.h | 10 ++ 2 files changed, 22 insertions(+), 1 deletions(-) diff --git a/arch/arm/cpu/armv7/omap3/sys_info.c b/arch/arm/cpu/a

[U-Boot] [PATCH 2/7] fpga: support FPP Cyclone configuration

Support FPGAs which use Fast Passive Parallel configuration Signed-off-by: Michael Jones --- drivers/fpga/cyclon2.c | 10 ++ 1 files changed, 10 insertions(+), 0 deletions(-) diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c index 4622b4e..567099e 100644 --- a/drivers/fpga/

[U-Boot] [PATCH 1/7] fpga: add #define for Altera Cyclone EP3C5

Signed-off-by: Michael Jones --- include/ACEX1K.h |1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/include/ACEX1K.h b/include/ACEX1K.h index ae20164..2bb9226 100644 --- a/include/ACEX1K.h +++ b/include/ACEX1K.h @@ -76,6 +76,7 @@ typedef struct { #define Altera_EP2C8_SIZE

[U-Boot] [PATCH 0/7] OMAP3: Add support for mvBlueLYNX-X

Add support for the Matrix Vision mvBlueLYNX-X, an OMAP3-based intelligent camera. These patches were created on top of v2011.06, but they also apply cleanly to master and u-boot-arm/master. What should I use as base to submit such a patch? Howard D. Gray (1): Add 37xx ESx revision numbers. M

Re: [U-Boot] [PATCH 1/2] integratorap: disable dcache

On Fri, Jul 15, 2011 at 09:42:53AM +0200, Heiko Schocher wrote: > Hmm.. trying bootm with actual u-boot on a davinci (arm926ejs) based > board, there I couldn;t use the Davinci-EMAC (if I disable the dcache > it works ...) I can confirm there are some cache coherency problems with the DaVinci EMAC

Re: [U-Boot] Ping command

Hi Wolfgang Denk, I get the below messages. Its failing in the fec_send BD_ENET_TX_READY bit is not getting set. Any clue? EPN412> ping 172.16.52.20 Trying FCC1 ETHERNET pram_ptr->fen_genfcc.fcc_rbase 03efcc88 pram_ptr->fen_genfcc.fcc_tbase 03efcca8 Using FCC1 ETHERNET device sending ARP for ac10

Re: [U-Boot] [PATCH v2 1/2] ARMV7: Add support for Samsung ORIGEN board

Dear Chander Kashyap, On 12 July 2011 17:48, Chander Kashyap wrote: > Origen board is based upon S5PV310 SoC which is similiar to > S5PC210 SoC. > > Signed-off-by: Chander Kashyap > --- >  MAINTAINERS                          |    1 + >  board/samsung/origen/Makefile        |   46 >  board/

Re: [U-Boot] [RFC PATCH v1 0/9] Prototype for generic SPL framework

Dear Aneesh, In message <4e1ff2d7.3010...@ti.com> you wrote: > > > I read your patches, and except to the documentation commetns I > > already made I have but only one question (I did not spend enough time > > to figure this out myself, sorry): Do you think the split of the > > patches is OK, i.

Re: [U-Boot] [PATCH] Let target 'cscope' follow symbolic links

> -Original Message- > From: Detlev Zundel [mailto:d...@denx.de] > Sent: Freitag, 15. Juli 2011 09:34 > To: KRONSTORFER Horst > Cc: u-boot@lists.denx.de > Subject: Re: [U-Boot] [PATCH] Let target 'cscope' follow symbolic links > > Hi Horst, > >> Without telling 'find' to follow symbolic

[U-Boot] [PATCH 4/4] cmd_mac: fix help for 'mac read'

In the only implementation of 'mac read', it doesn't display the contents of the eeprom as the help indicated unless compiled with DEBUG. It only re-reads the contents of the EEPROM into memory. Displaying the contents of the EEPROM is done by passing no arguments to 'mac'. Signed-off-by: Michael

[U-Boot] [PATCH 3/4] cmd_mac: cleanup help

Signed-off-by: Michael Jones --- common/cmd_mac.c |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/common/cmd_mac.c b/common/cmd_mac.c index 1884c2a..0f924b7 100644 --- a/common/cmd_mac.c +++ b/common/cmd_mac.c @@ -30,7 +30,7 @@ U_BOOT_CMD( mac, 3, 1, do_mac,

[U-Boot] [PATCH 2/4] altera: fix printf typo

Signed-off-by: Michael Jones --- drivers/fpga/altera.c |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/fpga/altera.c b/drivers/fpga/altera.c index 650f2ec..103d81c 100644 --- a/drivers/fpga/altera.c +++ b/drivers/fpga/altera.c @@ -60,7 +60,7 @@ int altera_load(

[U-Boot] [PATCH 1/4] cosmetic

Signed-off-by: Michael Jones --- README |6 +++--- arch/arm/include/asm/global_data.h |2 +- common/cmd_eeprom.c|2 +- common/cmd_i2c.c |4 ++-- drivers/i2c/omap24xx_i2c.c |2 +- include/altera.h

[U-Boot] [PATCH 0/4] cosmetic

Here are some minor changes I've been collecting. Most of it is purely cosmetic, but there are some printf and help output changes, too. Michael Jones (4): cosmetic altera: fix printf typo cmd_mac: cleanup help cmd_mac: fix help for 'mac read' README |6 ++

Re: [U-Boot] ARM POST Tests.

Hello sreekumar.sivakumar, sreekumar.sivaku...@wipro.com wrote: > I am new to u-boot code. I had a requirement for running memory, cpu and > cache tests as part of diagnostics, on an ARM based platform. After > going through the code, I found that only PPC variants are available for > cpu and cach

[U-Boot] It is risk free and legal

My partners and I need a good partner some one we can trust ___ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot

Re: [U-Boot] [RFC PATCH v1 0/9] Prototype for generic SPL framework

On Friday 15 July 2011 01:55 AM, Wolfgang Denk wrote: > Dear Daniel Schwierzeck, > > In > message<1310569869-31810-1-git-send-email-daniel.schwierz...@googlemail.com> > you wrote: >> This patch series is the final proposal from Aneesh and myself for a >> generic SPL framework. The implementation

Re: [U-Boot] [PATCH v2 01/02] cosmetic: arm: libboard.c: Coding Style cleanup

Hello Wolfgang, Wolfgang Denk wrote: > Dear Heiko Schocher, > > In message <1310713420-6076-1-git-send-email...@denx.de> you wrote: >> Signed-off-by: Heiko Schocher >> Acked-by: Detlev Zundel >> cc: Albert Aribaud >> cc: >> >> --- >> changes for v2: >> Added Acked-by from Detlev Zundel >>

Re: [U-Boot] [PATCH 1/2] integratorap: disable dcache

Hello Linus, Linus Walleij wrote: > On Thu, Jul 14, 2011 at 1:39 PM, Wolfgang Denk wrote: > >> Sorry, but again I have to point out that I really dislike papering >> over existing bugs. If the disable D-cache in bootm does not work, >> _this_ should be analyzed and fixed instead of globally dis

Re: [U-Boot] [RFC] gpio command: return value on write, additional actions

Hi Mike, > On Wednesday, July 06, 2011 06:36:00 Wolfgang Denk wrote: >> For consistency I would prefer to have all commands return the same >> type of information, i. e. either an error status (like we do with all >> other commands - any result values would then have to be passed as >> environment

Re: [U-Boot] armv7: fix: Disable D cache for goni target (s5p)

On Thu, 14 Jul 2011 16:00:23 +0200 Albert ARIBAUD wrote: > Hi Lukasz, > > Le 11/07/2011 09:41, Lukasz Majewski a écrit : > > Signed-off-by: Lukasz Majewski > > Cc: Minkyu Kang > > Cc: Aneesh V > > --- > > Can you please submit a V2 patch in which the commit message provides > a rationale for tu

Re: [U-Boot] [PATCH] Let target 'cscope' follow symbolic links

Hi Horst, > Without telling 'find' to follow symbolic links, files under include/asm > and arch/$(ARCH)/include/asm/arch are not added to the cscope file list. While your point seems valid, I see three occurrences of such a find pattern and you fix only one. May I ask you to fix all of them so u

  1   2   >