On Sun, 7 Dec 2008, Wolfgang Denk wrote:
> Dear Anatolij & Stefan,
>
> In message <[EMAIL PROTECTED]> you wrote:
>>
>>> Use CONFIG_VIDEO_SM501NEW to enable the driver.
>>
>> not sure if CONFIG_VIDEO_SM501NEW is a good chose here. Maybe
>> we should use s.th. like CONFIG_VIDEO_SM50x. This applies t
On 12/3/2008 1:50 PM, Kumar Gala wrote:
> has anyone used a PCIe based SATA card w/u-boot?
>
>
Yes, I've used the Silicon Images 3531 w/ u-boot. Unless you mean have
I booted from the sata card, in that case, no.
___
U-Boot mailing list
U-Boot@lists.
Jerry Van Baren wrote:
> Wolfgang Denk wrote:
>
>> Dear Stefan Althoefer,
>>
>> In message <[EMAIL PROTECTED]> you wrote:
>>
>>> This patches cmd_nvedit to reject changes for "ethaddr." in addition to
>>> "ethaddr"
>>> and "serial#". This is intendend to protect changes to additional ether
Wolfgang Denk wrote:
> Dear Stefan Althoefer,
>
> In message <[EMAIL PROTECTED]> you wrote:
>> This patches cmd_nvedit to reject changes for "ethaddr." in addition to
>> "ethaddr"
>> and "serial#". This is intendend to protect changes to additional ethernet
>> addresses (e.g. "ethernet1").
>
> T
Dear Anatolij & Stefan,
In message <[EMAIL PROTECTED]> you wrote:
>
> > Use CONFIG_VIDEO_SM501NEW to enable the driver.
>
> not sure if CONFIG_VIDEO_SM501NEW is a good chose here. Maybe
> we should use s.th. like CONFIG_VIDEO_SM50x. This applies to
> the file names too: sm50x.h, sm50x.c, etc. Ev
Dear Stefan Althoefer,
In message <[EMAIL PROTECTED]> you wrote:
> This patches cmd_nvedit to reject changes for "ethaddr." in addition to
> "ethaddr"
> and "serial#". This is intendend to protect changes to additional ethernet
> addresses (e.g. "ethernet1").
The patch is bogus, as additional et
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message <[EMAIL PROTECTED]> you wrote:
> On 22:00 Wed 26 Nov , Remy Bohmer wrote:
> > Hello Jean-Christophe,
> >
> > >> In message <[EMAIL PROTECTED]> you wrote:
> > >> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]>
> > >>
> > >
Dear Daniel Hellstrom,
In message <[EMAIL PROTECTED]> you wrote:
> Hi Wolfgang,
>
> This patch fix a build error for the SPARC platform. It was introduced by
> commit
> c160a9544743e80e8889edb2275538e7764ce334.
>
> I have updated u-boot-sparc.git testing branch.
>
> Best Regards,
> Daniel Hel
Dear Gary Jennejohn,
In message <[EMAIL PROTECTED]> you wrote:
>
> Signed-off-by: Gary Jennejohn <[EMAIL PROTECTED]>
> ---
> board/keymile/mgsuvd/Makefile |3 +-
> board/keymile/mgsuvd/mgsuvd_hdlc_enet.c | 278
> +++
> 2 files changed, 280 insertions(+
Dear Gary Jennejohn,
In message <[EMAIL PROTECTED]> you wrote:
>
> Signed-off-by: Gary Jennejohn <[EMAIL PROTECTED]>
> ---
> board/keymile/mgcoge/Makefile |3 +-
> board/keymile/mgcoge/mgcoge_hdlc_enet.c | 276
> +++
> 2 files changed, 278 insertions(+
Dear Gary Jennejohn,
In message <[EMAIL PROTECTED]> you wrote:
> This implements the ICN protocol used across the backplane and is needed
> by all the keymile boards.
>
> Signed-off-by: Gary Jennejohn <[EMAIL PROTECTED]>
> ---
>
> checkpatch.pl reports an ERROR which is false.
>
> board/keymil
Hello Stefan,
Stefan Althoefer wrote:
> [PATCH] video: Add new driver for Silicon Motion SM501/SM502
>
> This patch adds a new driver for SM501/SM502. Compared to the
> existing driver it allows dynamic selection of resolution
> (environment: videomode).
>
> The drive is based on Vincent Sanders
Dear Jean-Christophe PLAGNIOL-VILLARD,
In message <[EMAIL PROTECTED]> you wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]>
> ---
> drivers/bios_emulator/Makefile |3 ++-
> drivers/bios_emulator/atibios.c |5 -
> drivers/bios_emulator/besys.
Dear Richard Retanubun,
In message <[EMAIL PROTECTED]> you wrote:
> Corrected endian order printing for compact flash serial number.
>
> Signed-off-by: Richard Retanubun <[EMAIL PROTECTED]>
> ---
> common/cmd_ide.c |7 ---
> 1 files changed, 4 insertions(+), 3 deletions(-)
Applied, than
Dear Gary Jennejohn,
In message <[EMAIL PROTECTED]> you wrote:
>
> Modifications to support console multiplexing. This is controlled using
> CONFIG_SYS_CONSOLE_MUX in the board configuration file.
>
> This allows a user to specify multiple console devices in the environment
> with a command lik
Dear Mike,
in message <[EMAIL PROTECTED]> you wrote:
>
> > ...but would it not make sense to allow to make the decision which
> > behaviour fits the user's requirements at runtime instead of compile
> > time?
> >
> > We could either make this depend on some environment variable setting,
> > or on
Dear Mike Frysinger,
In message <[EMAIL PROTECTED]> you wrote:
> When running `strings` on really long strings, the stack tends to get
> smashed due to printf(). Switch to puts() instead since we're only passing
> the data through.
>
> Signed-off-by: Mike Frysinger <[EMAIL PROTECTED]>
> ---
> c
Options are now all uniformly CONFIG_SYS_SC520_
Signed-off-by: Graeme Russ <[EMAIL PROTECTED]>
---
board/sc520_cdp/sc520_cdp.c | 16
cpu/i386/sc520/Makefile |4 ++--
cpu/i386/sc520/sc520.c|6 +++---
cpu/i386/sc520/sc520_asm.S|4 ++--
include/conf
Forgotten in commit d1f2d102a266804a50ff0cd9794459791f057c94
Signed-off-by: Graeme Russ <[EMAIL PROTECTED]>
---
include/configs/eNET.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 7d4e21f..16dfb3f 100644
--- a/incl
Reset function specific to AMD SC520 microcontroller - Is more of a 'hard
reset' that the triple fault.
Signed-off-by: Graeme Russ <[EMAIL PROTECTED]>
--
Requires CONFIG_SYS_RESET_SC520 to be defined in config
I would have liked to add this to a new file (cpu/i386/sc520/reset.c) but ld
requires t
Signed-off-by: Graeme Russ <[EMAIL PROTECTED]>
---
board/sc520_cdp/sc520_cdp.c |2 +-
drivers/misc/ali512x.c |2 +-
include/{asm-i386/ic => }/ali512x.h |0
3 files changed, 2 insertions(+), 2 deletions(-)
rename include/{asm-i386/ic => }/ali512x.h (100%)
diff --g
Signed-off-by: Graeme Russ <[EMAIL PROTECTED]>
---
board/eNET/u-boot.lds |6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds
index 2dafbb5..9e02326 100644
--- a/board/eNET/u-boot.lds
+++ b/board/eNET/u-boot.lds
@@ -75,7 +75,7
CONFIG_SC520 is now used for conditional compile
Signed-off-by: Graeme Russ <[EMAIL PROTECTED]>
---
cpu/i386/sc520/sc520.c |4
1 files changed, 0 insertions(+), 4 deletions(-)
diff --git a/cpu/i386/sc520/sc520.c b/cpu/i386/sc520/sc520.c
index 50bd8ef..12e8f38 100644
--- a/cpu/i386/sc520
Dear Niklaus Giger,
In message <[EMAIL PROTECTED]> you wrote:
>
> Signed-off-by: Niklaus Giger <[EMAIL PROTECTED]>
> ---
> include/configs/netstal-common.h | 29 ++---
> 1 files changed, 14 insertions(+), 15 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Dear Niklaus Giger,
In message <[EMAIL PROTECTED]> you wrote:
> Signed-off-by: Niklaus Giger <[EMAIL PROTECTED]>
> ---
> common/cmd_elf.c | 81
> --
> 1 files changed, 30 insertions(+), 51 deletions(-)
Applied, thanks.
Best regards,
Wolfga
Dear Niklaus Giger,
In message <[EMAIL PROTECTED]> you wrote:
> The following improvements are made and tested on my HCUx boards:
>
> README
> - document bootvx and CONFIG_SYS_VXWORKS parameters
>
> vxworks.h
> - add new vxworks.h with some default definitions
>
> cmd_elf.c
> - fix size too sma
Dear Peter Tyser,
In message <[EMAIL PROTECTED]> you wrote:
> Allow tqm8xx.c to cleanly compile when CONFIG_LCD_INFO is
> defined and remove unneeded version.h from lcd.c
>
> Signed-off-by: Peter Tyser <[EMAIL PROTECTED]>
> ---
> I noticed this when adding timestamp.h to tqm8xx.c.
> The "Update U
I posted new version of patch to fix some more errors and style, so
this is obsolete.
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Dear Peter Tyser,
In message <[EMAIL PROTECTED]> you wrote:
> Use the GNU 'date' command to auto-generate a new U-Boot
> timestamp on every compile.
>
> Signed-off-by: Peter Tyser <[EMAIL PROTECTED]>
> ---
> Changes since v1:
> * Split up U_BOOT_DATE define (date and time) into
> U_BOOT_DATE (d
Hi Anatolij,
>> Use CONFIG_VIDEO_SM501NEW to enable the driver.
>
> not sure if CONFIG_VIDEO_SM501NEW is a good chose here. Maybe
> we should use s.th. like CONFIG_VIDEO_SM50x. This applies to
> the file names too: sm50x.h, sm50x.c, etc. Even better would
> be a merge with the existing driver.
This patch fixes the PCI handling routines of the IXP port.
It seems that this hasn't been touched for quite a while and
u-boot PCI handling has changed since then (but nobody
update IXP).
Changes (list uncomplete):
- non_prefetched_read/write now return ERROR on
(master-) abort.
- fixe
On 22:25 Thu 04 Dec , Remy Bohmer wrote:
> Currently the arm926ejs tree has the armv4 option set during compilation.
> This flag does not belong here because a arm926 CPU is always a armv5 CPU.
>
> Signed-off-by: Remy Bohmer <[EMAIL PROTECTED]>
> ---
> cpu/arm926ejs/at91/config.mk |1 -
>
> diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c
> new file mode 100644
> index 000..7c0c5b4
> --- /dev/null
> +++ b/board/omap3/pandora/pandora.c
> @@ -0,0 +1,124 @@
> +/*
Copyright?
> + * Maintainer : Grazvydas Ignotas <[EMAIL PROTECTED]>
> + *
> + * Derived from B
On 00:14 Wed 26 Nov , Grazvydas Ignotas wrote:
> This patch adds configuration file for OMAP3 Pandora.
>
> Signed-off-by: Grazvydas Ignotas <[EMAIL PROTECTED]>
> ---
> include/configs/omap3_pandora.h | 302
> +++
> 1 files changed, 302 insertions(+), 0 de
Hello Stefan,
please see comments below:
Stefan Althoefer wrote:
> [PATCH] video: Add new driver for Silicon Motion SM501/SM502
this line duplicates the subject, so simply remove it.
> This patch adds a new driver for SM501/SM502. Compared to the
> existing driver it allows dynamic selection of
On 11:28 Wed 03 Dec , Timur Tabi wrote:
> All implementations of the functions i2c_reg_read() and i2c_reg_write() are
> identical. We can save space and simplify the code by converting these
> functions into inlines and putting them in i2c.h.
>
> Signed-off-by: Timur Tabi <[EMAIL PROTECTED]>
On 09:41 Fri 05 Dec , Remy Bohmer wrote:
> Hello Jean-Christophe,
>
> >> @@ -33,9 +33,13 @@ ifeq ($(ARCH),arm)
> >> ifeq ($(BOARD),omap2420h4)
> >> LOAD_ADDR = 0x8030
> >> else
> >> +ifeq ($(BOARD),at91sam9261ek)
> >> +LOAD_ADDR = 0x2140
> >> +else
> >> LOAD_ADDR = 0xc10
> >>
> - fat_register_device(&mmc_blk_dev, 1);
> - return 0;
> + if (configure_mmc(&cur_card_data) == 1) {
> + mmc_blk_dev.if_type = IF_TYPE_MMC;
> + mmc_blk_dev.part_type = PART_TYPE_DOS;
> + mmc_blk_dev.dev = 0;
> + mmc_blk_dev.lun = 0;
> +
On 10:38 Sat 06 Dec , Jason Kridner wrote:
> Is it possible to rename boot.script to boot.scr or something with an
> 8.3 filename, in case someone formats their SD card as msdos, rather
> than vfat?
>
Ack
Best Regards,
J.
___
U-Boot mailing list
> ===
> --- u-boot-arm.orig/include/asm-arm/arch-omap3/omap3.h
> +++ u-boot-arm/include/asm-arm/arch-omap3/omap3.h
> @@ -75,7 +75,15 @@
>
> /* 32KTIMER */
> #define SYNC_32KTIMER_BASE 0x4832
> -#define S32K_CR
Hi,
On Sat, Dec 06, 2008 at 06:11:04PM +0100, Jean-Christophe PLAGNIOL-VILLARD
wrote:
> On 18:42 Sat 29 Nov , Daniel Mack wrote:
> > Hi,
> >
> > this patch adds support for Toradex' "Colibri PXA300" module. I had to
> > modify the AX88796 driver a bit to make it work, but that goes in a
> >
On 18:42 Sat 29 Nov , Daniel Mack wrote:
> Hi,
>
> this patch adds support for Toradex' "Colibri PXA300" module. I had to
> modify the AX88796 driver a bit to make it work, but that goes in a
> different patch.
>
some general comment
please becarefull on the 80 chars limit
please check all th
On Fri, Dec 05, 2008 at 10:16:22PM +0100, Wolfgang Denk wrote:
> > Ok. Do you want me to submit some "#ifdef MONAHANS" patch for the pxa
> > ge_timer() function or is anyone working on major reworks for this
> > anyway?
>
> You best coordinate this with Jean-Christophe, the PXA custodian.
I guess
Is it possible to rename boot.script to boot.scr or something with an
8.3 filename, in case someone formats their SD card as msdos, rather
than vfat?
On Dec 6, 2008, at 1:03 AM, Dirk Behme wrote:
> Enable "hush" command parser and set default environment to boot
> from MMC if
> a bootable c
I've run u-boot with all of these patches and see it working well on
Beagle.
On Dec 6, 2008, at 1:00 AM, Dirk Behme wrote:
> mmc_init was always returning success -- now returns failure if
> no card is present.
>
> Signed-off-by: Steve Sakoman <[EMAIL PROTECTED]>
> Signed-off-by: Dirk Behme <[E
Hi Wolfgang,
Please pull The following changes since commit
90665e3d97948000f98846ded37c921c7ae67dd7:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-at91
are available in the git repository at:
git://git.denx.de/u-boot-at91.git master
Nicolas Ferre (1):
a
On Tue, 2 Dec 2008 07:40:03 +0100
Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]> wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]>
> ---
> board/renesas/r2dplus/lowlevel_init.S | 42
> 1 files changed, 21 insertions(+), 21 delet
On Fri, 5 Dec 2008 07:27:37 +0100
Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]> wrote:
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[EMAIL PROTECTED]>
> ---
> board/renesas/r2dplus/lowlevel_init.S |2 +-
> drivers/pci/pci_sh7751.c |4 ++--
> 2 files changed, 3 i
On 17:27 Fri 05 Dec , Nicolas Ferre wrote:
> This patch adds the possiblity to choose the media where the environment will
> be located. This allow to choose this fundamental configuration without
> editing
> config files.
>
> Documentation file added.
>
> Signed-off-by: Nicolas Ferre <[EMAIL
49 matches
Mail list logo
