Public bug reported:
Steps to reproduce:
1. configured debug repo with vim into /etc/apt/source.list like:
deb http://ddebs.ubuntu.com/ubuntu/ focal-updates main
Did that in a docker container where the following is installed:
apt update; apt-get install -y ca-certificates; apt install curl -
Public bug reported:
The meta-packages ubuntu-desktop-minimal / ubuntu-minimal depend on
everything needed for a functioning desktop / server installation
respectively. Well, almost everything.
Two packages that they don't depend on, but should, or at least it should
recommend them are:
- crypts
@jbicha
After installation, it was fine. It's just that in the process of trying to
clean up leftover packages years later, I did something like:
# apt-get update && apt-get dist-upgrade
# apt-mark auto '*'
# apt-mark manual ubuntu-minimal
# apt-mark manual ubuntu-desktop-minimal
# apt-mark manua
I see.
"apt-mark auto '*'" may not be "supported" but it works and has been for a long
time, even on Debian. If my installation wouldn't have had an encrypted root, I
wouldn't have run into any issue. And I guess those with a non-encrypted setup
don't need cryptsetup so in this sense ubuntu-mi
** Changed in: ubuntu-meta (Ubuntu)
Status: New => Opinion
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to ubuntu-meta in Ubuntu.
https://bugs.launchpad.net/bugs/2003387
Title:
ubuntu-desktop-minimal should depend on
@seb128 I am aware that this has been fixed in hirsuite, but it remains
unfixed in focal. I am committed to staying on an LTS release.
If this is not the right place to report this bug, could you please
point me to how I can navigate the relevant backporting request process?
--
You received this
Public bug reported:
I cannot edit files on a Windows share that is smb-mounted by Ubuntu
using VI, VIM or GVIM.
Other applications on Ubuntu do not have this problem, including GEDIT
and LibreOffice
Bizarrely I can create a file with VI, VIM and GVIM, but saving changes in any
subsequent edit
How to stop receiving this emails?
---
V prípade akýchkoľvek otázok alebo nejasností ma neváhajte kontaktovať.
S pozdravom a úctou / Best regards and respectfully
Peter Onger
Mobil - 00421 904 526 034
Email - ogi2...@gmail.com
-
Zeitgeist
also use gswitcher, a small program designed
to make the xorg conf file for the egpu.
I have disabled secure boot and cstates
Good luck fixing nvidia driver 430.
Thank you for your dedication!
Peter
ProblemType: Bug
DistroRelease: Ubuntu 18.10
Package: xorg 1:7.7+19ubuntu8
ProcVersionSignature
ation guys!!
Take care,
Peter
ProblemType: Bug
DistroRelease: Ubuntu 18.04
Package: xorg 1:7.7+19ubuntu7.1
ProcVersionSignature: Ubuntu 4.18.0-20.21~18.04.1-generic 4.18.20
Uname: Linux 4.18.0-20-generic x86_64
NonfreeKernelModules: nvidia_modeset nvidia
.proc.driver.nvidia.gpus..01.00.0: Error:
We seem to be still affected by this even with 1.1.1-1ubuntu2.1~18.04.4
installed. Though our use case is during a PXE install, but we will get
prompted to restart services where is before that was never the case.
bionic LTS is the only LTS we are seeing on it. I can repo the issue
and send any l
*** This bug is a security vulnerability ***
Private security bug reported:
Can't install packages like wireshark
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: linux-image-extra-4.4.0-141-generic 4.4.0-141.167
ProcVersionSignature: Ubuntu 4.4.0-141.167-generic 4.4.162
Uname: Linux 4.
Adding
DNSMASQ_EXCEPT=lo
to
/etc/default/dnsmasq
solves the problem in my case, kubuntu 17.10, kernel 4.15.rc7,
for several days now.
Peter
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to dnsmasq in Ubuntu.
https
3.16.0-53-generic x86_64
ApportVersion: 2.14.1-0ubuntu3.18
Architecture: amd64
AudioDevicesInUse:
USERPID ACCESS COMMAND
/dev/snd/controlC1: peter 1793 F pulseaudio
/dev/snd/controlC0: peter 1793 F pulseaudio
CurrentDesktop: Unity
Date: Tue Nov 17 13:45:03 2015
Instal
Public bug reported:
The first error is that the audit message (notice the path):
type=AVC msg=audit(1448143203.902:359992): apparmor="DENIED"
operation="file_mmap" info="Failed name lookup - disconnected path"
error=-13 profile="/usr/sbin/openvpn" name="run/nscd/dbfQMsBd" pid=25814
comm="openvpn
** Attachment added: "Corruption at the bottom of the search window"
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1492580/+attachment/4457852/+files/Screenshot%20from%202015-09-05%2014%3A29%3A23.png
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
Public bug reported:
I am running a newly installed and updated Ubuntu 14.04.3 LTS on a
Samsung P500 Laptop (Model NP-P500I, NP-P500-RA01DE). I guess this issue
is related to the graphics card, which is a Radeon Xpress 1250.
The display corruption occurs directly after login on the top of the
scr
Public bug reported:
I've got this error message while auto upgrading in Ubuntu 17.10 Artful
Aardvark (development branch)
Kernel: 4.13.0-12-generic
ProblemType: Package
DistroRelease: Ubuntu 17.10
Package: unattended-upgrades 0.98ubuntu1
ProcVersionSignature: Ubuntu 4.13.0-12.13-generic 4.13.3
The solution proposed by Juan Hernandez (message 32) worked for me. I am
running Xubuntu 16.04 on a Dell Inspiron 3542. I finally decided to look
for a fix after successfully using a wireless mouse for some time. I did
not have to modify /usr/share/X11/xorg.conf.d/90-libinput.conf as some
others di
Hi. I have the same problem with my installation. I'm using Ubuntu 16.04. I get
the same popping sounds as other users. It seems like that the sound goes very
high for a split second every minute or so and I get the volume notification
bubble with it.
It also happens when I mute the sound. In th
Public bug reported:
I just upgraded Ubuntu from 12.04 to 14.04 to 14.10. After the first
update the system booted and everything was fine (when the updater asked
me about configuration of something I always clicked "Replace"), but
after the second update I also could log in, but after that I only
Just wanted to update that launching the Gnome seems like a workaround,
because it works fine.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1420025
Title:
No upper panel or
** Summary changed:
- No upper panel or window decorations after upgrading from 14.04
+ Unity doesn't show the top menu bar or launcher after upgrading from 10.04 to
14.04
** Summary changed:
- Unity doesn't show the top menu bar or launcher after upgrading from 10.04 to
14.04
+ Unity doesn't
Public bug reported:
No Display or Bad Quality
ProblemType: Bug
DistroRelease: Ubuntu 16.10
Package: xorg 1:7.7+13ubuntu4
ProcVersionSignature: Ubuntu 4.8.0-26.28-generic 4.8.0
Uname: Linux 4.8.0-26-generic x86_64
.tmp.unity_support_test.0:
ApportVersion: 2.20.3-0ubuntu8
Architecture: amd64
Com
Public bug reported:
➜ cache sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following extra packages will be installed:
cpp-4.8 g++-4.8 gcc-4.8 gcc-4.8-base gir1.2-gtk-2.0 lib32gcc1 liba
Public bug reported:
Errors were encountered while processing:
dictionaries-common
E: Sub-process /usr/bin/dpkg returned an error code (1)
ProblemType: Package
DistroRelease: Ubuntu 14.04
Package: dictionaries-common 1.20.5
ProcVersionSignature: Ubuntu 3.2.0-87.125-generic 3.2.69
Uname: Linux 3.
ug description:
> When i try to use package manager for installing / un-installing of any
> software, it keeps failing with following progress:
> I couldn't find a solution for this. What could be the problem please?
> Thanks
>
> peter@peterk:~$ sudo apt-get install vlc
>
Public bug reported:
The following change removes the expand_ppa_line function, without any
mention elsewhere.
http://bazaar.launchpad.net/~ubuntu-core-dev/software-
properties/main/revision/904#softwareproperties/ppa.py
I don't know if this is intended, if so: shouldn't this change have been
do
After a dist-upgrade of my Linux Mint (to Olivia), I ran into the same
problems.
Your fix (renaming all c++/4.7 directory to something like c++/4.7_old)
fixed it. Just my directories were /usr/include/c++/4.7/ and
/usr/include/i386-linux-gnu/c++/4.7/ . But that was easy to find.
--
You received
still happening in ubuntu 22.04
lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 22.04.4 LTS
Release:22.04
Codename: jammy
Feb 21 09:19:54 <> systemd[1]: Started ACPI Events Check.
Feb 21 09:19:54 <> systemd[1]: Started Process error reports
On Jammy, the update from 2.4.7-1ubuntu0.2 to 2.4.7-1ubuntu0.3 causes
simialr XML not well formed (invalid token) errors for files which
contain binary data. Downgrading to 2.4.7-1 resolved the issue.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages,
** Also affects: fontconfig (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ubuntu.
https://bugs.launchpad.net/bugs/2061995
Title:
ULLTS 22,24: FontConfig b
** Summary changed:
- ULLTS 22,24: FontConfig broken by including ".conf" file
+ ULTS 22,24: FontConfig broken by including ".conf" file
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ubuntu.
https://bugs.launc
VTK has been patched upstream to correctly handle AppendedData elements
in .vtu files with the updated/patched libexpat1:
https://gitlab.kitware.com/vtk/vtk/-/commit/db8f9efca220c9d16a30958e179abae3379d0011
https://gitlab.kitware.com/vtk/vtk/-/issues/19258
This will need backporting to older V
** Also affects: vtk7
Importance: Undecided
Status: New
** No longer affects: vtk7
** Also affects: vtk7 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to expat in
** Changed in: lsb (Ubuntu)
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lsb in Ubuntu.
https://bugs.launchpad.net/bugs/597337
Title:
lsb_release should show history of release upgrades
S
** Changed in: bash (Ubuntu)
Status: New => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bash in Ubuntu.
https://bugs.launchpad.net/bugs/664264
Title:
GID is not defined upon user GDM login
Status in ba
Public bug reported:
The default /etc/adduser.conf contains the line:
#NAME_REGEX="^[a-z][-.a-z0-9_]*\$"
Commenting this out in preparation of updating it does not work as
expected:
pra@PABELN-X1E:~$ grep NAME_REGEX /etc/adduser.conf; sudo adduser testuser
NAME_REGEX="^[a-z][-a-z0-9
After several hundred package updates over time this problem is no
longer occurring, I suspect that it was something buggy in the XML
library used by FotnConfig.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to fontconfig in Ub
I open one terminal window, then use + on top left to open a second. then on
the second one,
I pick detach. and it crashes (this is in 24.04.)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://bugs.la
Public bug reported:
rsync 3.2.3 (packaged in Ubuntu 22.04) changes stderr handling, leading
another bug in libfile-rsyncp-perl (in Ubuntu 18.04 and 20.04) to
surface [1].
It practically makes using BackupPC 3 impossible with clients using
rsync 3.2.3, as is packaged for 22.04. The fact that Back
Thank you for looking into this. The test case is described in
https://github.com/backuppc/backuppc/issues/369#issuecomment-693663922
and boils down to:
> * Create temporary file on host [i.e. backup client, with rsync 3.2.3]
> * Run `/usr/share/backuppc/bin/BackupPC_dump -v -f host` manually on t
fixed: https://launchpad.net/ubuntu/+source/rsync/3.2.7-0ubuntu0.22.04.2
** Changed in: rsync (Ubuntu Jammy)
Status: Triaged => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to rsync in Ubuntu.
https://bugs
Same problem. Under Xorg, the Wacom tablet can move the pointer but as
soon as I tap to click, the system locks up. Pressing alt tab a few
times restores movement to the pointer. The Wacom is therefore unusable
under Xorg. Sadly, in GIMP it's also unusable under Wayland as the
pointers are invisibl
FYI This bug still exists (in Focal/Mantic made to use `devel`: `sudo
sed -i 's/focal/devel/g' /etc/apt/sources.list` -
https://discourse.ubuntu.com/t/ubuntu-as-rolling-release/14751/106).
Any alternatives or workarounds to get as close to "rolling release" as
possible, please?
--
You received t
+1
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to whoopsie in Ubuntu.
https://bugs.launchpad.net/bugs/2018996
Title:
whoopsie uses 100% CPU indefinitely on chrome crash file
Status in whoopsie package in Ubuntu:
New
Bu
Thanks for responding. Why is it then that the occurrences are identical with
openSUSE please?
rsvp & thx again. Peter
On Tuesday, May 25, 2021, 12:50:37 PM EDT, Adolfo Jayme
<1929...@bugs.launchpad.net> wrote:
AFAIK, Ubuntu disables some of these emergency keys by default
Public bug reported:
I switched to nvidia-driver-450-server because my second monitor stopped
working after switching to nvidia-driver-460. However, this switch broke
suspend on my ThinkPad running Ubuntu 20.04. The laptop doesn't properly
suspend anymore, and when trying to get it out of suspend
This became an issue in Fedora 33 when they went to systemd-resolved.
They have just packaged and updated to strongsWan 5.9.2 and I can
confirm it resolves this issue without workarounds.
This is a VPN, surely for security reasons alone we should be getting
the latest packages as updates? This aff
I have seen this happening for months, though not very often. But it
happened yesterday and today again.
Music playing in the background (via Audacious) is garbled. This usually
happens when I open a website in a new tab. Sounds like a bitcrusher
effect to me.
I can reverse the effect by closing
commands via /bin/sh, it tries to run e.g. "command" directly, which
fails in Makefiles that try to use "command -v" or "command -pv" to
figure out the full path of an executable program.
Thanks in advance, and keep up the great work!
G'luck,
Peter
ProblemType: Bug
Public bug reported:
Summary:
I am using firewalld/jammy,now 1.1.1-1ubuntu1 on my vpn server. The vpn server
is using wireguard and I could successfully configure zones and policies in
firewalld. Yet, iptables does not show the rules from firewalld.
1) System
root@vpn:~# uname -a
Linux vpn 5.15
Public bug reported:
System is Mint 20.2, with the relevant packages taken from Ubuntu Focal.
This is the output of `systemd-resolv --status vpn0`:
Link 7 (vpn0)
Current Scopes: DNS
DefaultRoute setting: yes
LLMNR setting: yes
MulticastDNS setting: no
DNSOve
I have got the same issue on 21.10.
Headphones: JBL LIVE 650BTNC
Bluetooth: Device-1: Intel Wireless-AC 3168 Bluetooth type: USB driver: btusb
v: 0.8 bus-ID: 1-9:6 chip-ID: 8087:0aa7
class-ID: e001
Report: hciconfig ID: hci0 rfk-id: 0 state: up address:
bt-v: 2.1 lmp-v:
robably only on this AMD 5700G CPU based system (in
an ASUS Desktop X300M system), please just ask.
Thanks for all your efforts.
Peter J. Jansen
Fichtlirain 13
CH-4105 Biel-Benken
Switzerland
Mob.: 0041 79 759 47 40
E-Mail (IEEE Life Member) : p.jan...@computer.org
E-Mail (S/MIME signed) : peter.j
Recent Ubuntu 22.04.2 LTS, libgtk-4-common 4.6.6+ds-0ubuntu1,
libgtk-3-common 3.24.33-1ubuntu2,vivaldi-stable 5.7.2921.65-1
'Save as' dialog now works as expected: focus is on filename keyboard
entry, immediately closes dialog.
BAD regression:
Vivaldi window is frozen after that. Does not
*** This bug is a duplicate of bug 1901922 ***
https://bugs.launchpad.net/bugs/1901922
@Hui Wang:
Mistake in Linux Mint 21.1:
sudo add-apt-repository ppa:hui.wang/pa-testing
PPA kann nicht hinzugefügt werden: »'Dieses PPA unterstützt jammy nicht
What can I Do?
--
You received this bug no
@Hui Wang:
Mistake in Linux Mint 21.1:
sudo add-apt-repository ppa:hui.wang/pa-testing
PPA kann nicht hinzugefügt werden: »'Dieses PPA unterstützt jammy nicht
What can I Do?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
nce count and sets d->policy to NULL. The second time
round, the reference count is decremented again, but policy is already
NULL from last time round, hence the crash.
I've included a patch that I think should fix the error, but note that
it is not well tested!
Peter
** Affects: dbus (Ubuntu
the fault is replaced by SO_PEERGROUPS.
This makes it immune to nss disappearing under its feet, though it is a slight
change in behaviour. When applying a policy, it will be the user's current
groups that count, rather than the groups they would get if they logged in now.
Peter
** Bug
For 22.04, I can additionally confirm the problem for Vivaldi's save dialog.
Whereas the seemingly identical dialog in LibreOffice works as intended.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in Ubuntu.
https://b
The bug described here looks like the one I'm experiencing. I have
multiple yubikeys which I use for SSH and GPG (occasionally U2F but that
doesn't appear to be affected by this). If I just enable the pcscd
service, the daemon doesn't auto-start after a reboot. Running ssh or
gpg commands fails to
Public bug reported:
Jammy Jellyfish 22.04.1 LTS and others. There have been numerous bug
reports and failed fixes for this over several years and releases.
There are a couple of problems in /etc/X11/Xsessions where it fails to
handle options, causing bogus error messages and, doubtless, many
err
Bother. There is a third problem, a scope issue of some sort.
The errors in ~/.xsession.error go away if "has_options" is moved from Xsession
to its own file in Xsession.d
I don't see why sourceing it should make any difference, but it does.
$ cat /etc/X11/Xsession.d/00
has_option () {
# Ens
And now OPTIONS has to be exported,
and probably should be protected against being empty in the new file. So it
becomes ${OPTIONS:-} and ${1:-}
What else have I missed?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to xorg i
Public bug reported:
I have a fresh install of Ubuntu 22.04.3, using the default Wayland, on my
laptop which is used at two locations:
- at work I have my primary built-in 4K display and 2 additional 1920x1080
monitor connected to a HP DisplayLink docking station using DP, connected to my
lapto
Now I have a related problem at work, where the external monitors were
not detected after plugging in the laptop in the docking station and
opening the lid. Turning off and on one monitor resulted in detection
(in poor resolution) but not the second external one. When both are
turned off and on, th
This bug is mighty annoying. E.g. you can't simply type to get out
of the save dialog, if you wrongly typed . You first need to
mouse the pointer to the text field.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to gtk+3.0 in U
This might provide some relief;
https://wiki.strongswan.org/projects/strongswan/repository/revisions/44e5e8367691dd64f4e5ba0105fdc28b1f81ff25
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.lau
Public bug reported:
This bug is a regression introduced in 8.1.1-0ubuntu1 for Bionic -- the
previous 8.1-0ubuntu3.2 gdb works fine with QEMU's gdbstub.
Reproduce:
Get the sources for QEMU 5.2.0, and build the aarch64-linux-user target. (It
looks like Bionic's QEMU is old enough that it doesn't
Further testing with the old gdb-8.1-0ubuntu3 package shows that this
isn't a regression since then, as that version fails too. I must have
been misled by the apt history.log somehow; sorry for the confusion
there.
--
You received this bug notification because you are a member of Ubuntu
Touch see
It looks like the reason QEMU's test suite passed was that the older
Ubuntu gdb didn't have a fix for LP:1901026 (support remote connection
over UNIX domain socket), so the test suite would simply skip the
offending test and never get as far as falling over the assertion
failure. After pulling vari
I have performed the installation several times. It only happens with
either a BT 4 or a BT 5 dongle. Bluetooth 4 is CRS. Bluetooth 5 is
mediatek.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.
Public bug reported:
Hi,
When having a bluetooth headphone (JBL Live) connected using the A2DP
pulseaudio sink, the output sound suddenly stops during a music
streaming of videocall session. Sometimes just disconnecting and
reconnecting the headphone works, but some times reconnection is not
pos
Public bug reported:
This bug is related to bug 1723558
(https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1723558) but I
could not transfer the generated information.
After a crash of bluetoothd (see bug 1910405) I tried to run apport-
collect with the bug ID, but the process hangs. After cl
This time I could kill the proces from terminal instead of having to do
a remote login over ssh:
$ apport-collect 1910405
^CException ignored in:
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 1294, in _shutdown
t.join()
File "/usr/lib/python3.6/threading
$ cat /var/log/apport.log
ERROR: apport (pid 16819) Fri Jan 8 13:01:19 2021: called for pid 31066,
signal 4, core limit 0, dump mode 1
ERROR: apport (pid 16819) Fri Jan 8 13:01:19 2021: executable:
/opt/brave.com/brave/brave (command line "/opt/brave.com/brave/brave")
ERROR: apport (pid 16819)
I'm sorry, the apport-collect comment also results in a hanging process.
See this bug:
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1910768
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs
apport information
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451722/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.
apport information
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451726/+files/ProcCpuinfoMinimal.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
h
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451725/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
apport information
** Tags added: apport-collected
** Description changed:
Hi,
When having a bluetooth headphone (JBL Live) connected using the A2DP
pulseaudio sink, the output sound suddenly stops during a music
streaming of videocall session. Sometimes just disconnecting and
reco
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451727/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451728/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://b
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451729/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451730/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "getfacl.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451731/+files/getfacl.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.
apport information
** Attachment added: "rfkill.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451732/+files/rfkill.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "Lspci.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451723/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451724/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "syslog.txt"
https://bugs.launchpad.net/bugs/1910405/+attachment/5451733/+files/syslog.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
For some reason, killing the bluetoothd process just worked today unlike
previous attempts in the past days. The problem of the headset loosing
connection during a meeting, blocking the bluetooth process and settings
interface, still occurs requiring a restart of the bluetooth service and
the heads
The problem is back. This time I let the restart process wait for
several minutes. See this output.
peddecke@omer:~$ sudo service bluetooth restart
Job for bluetooth.service failed because the control process exited with error
code.
See "systemctl status bluetooth.service" and "journalctl -xe" f
Today I used tasksel to add "lubuntu-desktop" to an "ubuntu-desktop"
installation. Already installed and noticed by tasksel was additionally:
"SSH-Service" and "Print Server".
The installation of "lubunut-desktop" went fine. I logged in to lubuntu-
desktop and now I wanted to remove the "ubuntu-de
Just found this, because I also noticed the debsums error. A quick look in the
changelog finds this:
> procps (2:3.3.16-1ubuntu1) focal; urgency=low
> [...]
> * Dropped changes, no longer needed:
> ...
> - 10-link-restrictions.conf: this is redundant with link-protect.conf
> from D
Oh, I just found the file. It has a different name than suggested in the
changelog:
/usr/lib/sysctl.d/protect-links.conf
And silly me didn't of just checking what sysctl returns for those values set
in there. It's all good:
$ sudo sysctl fs.protected_fifos
fs.protected_fifos = 1
$ sudo sysctl fs
I am using systemd rather than upstart, but the bug is the same: cron
depends on remote-fs.target, autofs depends on remote-fs.target, so they
start together. The result is that the job is run with the working
directory set to /var/spool/cron.
What cron should be waiting for is home directories be
Public bug reported:
See my public question open here:
https://askubuntu.com/questions/1474771/wifi-control-gone-after-used-lan-cable-22-04-mate
I'd expect, to see the option "dis/enable wifi" at least when I disconnect from
LAN, (if not regardless on LAN connection).
But I can not see that opt
1. I boot my PC with LAN cable connected. Lan works, but I only see "Enable
networking" when I open the network manager options in the top right corner of
the screen. I guess, the "Enable Wireless" option is disabled deliberately,
while on LAN - which is not the best idea IMHO.
Can't screenshot
I have to correct the information - currently even if I rebooted several
times, the option "Enable Wireless" is not available :-o
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpa
1 - 100 of 690 matches
Mail list logo
