I've also got an Avantree DG80 as a workaround and I can confirm it
works with my Trekz OpenComm headset. It supports sounds up to 8 kHz
(corresponding to mSBC with a 16 kHz sampling frequency) with the mic
enabled, while anything connected directly to Linux bluetooth only goes
up to 4 kHz in HSP/H
@Christian, @Konrad, Ubuntu 22.04 has this fixed. It was fixed in
PulseAudio 15, run `pulseaudio --version` to see the version you are
running.
But HSP sound is still much worse than A2DP sound e.g. if you listen to
music. HSP is still mono and limited to a bandwidth of 8 kHz. The scope
of this bu
Public bug reported:
Volume increasing or decreasing doesn't work.
I can only toggle sound on (= 100%) and off (= 0%).
What I found out is that the Master channel seems to have no effect for
volume adjustments, but the PCM channel does. If the sound is muted, PCM
is set to 0 and therefore the so
This bug has been reported against a Fedora version which is already unsuported.
In compliance with FESCo decision how to handle EOL of Security issues [1],
I am changing the version to '27', the latest supported release.
Please check whether this bug is still an issue on the '27' release.
If you
Public bug reported:
I can't install it
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: util-linux 2.27.1-6ubuntu3.4
ProcVersionSignature: Ubuntu 4.13.0-32.35~16.04.1-generic 4.13.13
Uname: Linux 4.13.0-32-generic x86_64
ApportVersion: 2.20.1-0ubuntu2.15
Architecture: amd64
Date: Thu Ma
We ended up removing the openssh-server package entirely from the system
and then installing the latest version again using aptitude (obviously
this requires a physical login or some sort of virtual console on the
server, you can't do this over SSH itself :-)). The latest version is
now running aga
Issue present in Linux Mint 17.1 (Ubuntu 14.04).
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to util-linux in Ubuntu.
https://bugs.launchpad.net/bugs/1012081
Title:
util-linux needs updating to 2.24.2
Status in util-linux
By the way, another workaround to kill gnome-do is: press ctrl+alt+f1,
log in in the text terminal by typing your username and password when
prompted, run "pkill gnome-do", press ctrl+f7
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subsc
I have the same problem. For me it started after I upgraded to Xubuntu
14.10 (from 13.10). However, it only happens when I create a new user
that has a fresh gnome-do configuration. For my existing user gnome-do
still works fine.
I tried removing and purgin the gnome-do-plugins package but that di
I tried copying over the entire ~/.local/share/gnome-do folder from my
existing account where gnome-do works fine to a new account, but that
does not fix the problem, so the problem is not (only) a config setting
in gnome-do.
--
You received this bug notification because you are a member of Ubunt
Is this patch already available in the vivid next daily build? If not,
how could one apply it for the 'Try it' mode?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unity8 in Ubuntu.
https://bugs.launchpad.net/bugs/1434712
Ti
Please try the patch mentioned here:
https://bugs.launchpad.net/bugs/1308105
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1581302
Title:
Monitor remains blanked with Int
** Also affects: xfce4-settings (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lightdm in Ubuntu.
https://bugs.launchpad.net/bugs/1581302
Title:
Monitor remains blanked
*** This bug is a duplicate of bug 1032823 ***
https://bugs.launchpad.net/bugs/1032823
I don't think this duplicates #1032823. Had the same problem while
upgrading from 14.04 to 15.04 (which is apparently a direct upgrade path
now, rather than the update manager doing 14.04 to 14.10 first). Ha
I'm having similar problems with this package on 2 different servers.
When updating, dpkg hangs on the post install script of the openssh-
server package. The process becomes defunct and stops responding.
I edited the /var/lib/dpkg/info/openssh-server.postinst file and adjusted set
-e to set -x t
** Changed in: openssh (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssh in Ubuntu.
https://bugs.launchpad.net/bugs/1486107
Title:
package openssh-server 1:6.6p1-2ubuntu
> I think it's fine. It sounds like there will just be no way to
override package-installed blacklists any more. That's unfortunate, but
it's a very rare situation.
The i6300esb watchdog driver is required for every KVM/qemu virtual
machine with an emulated watchdog
(https://wiki.openstack.org/wik
Public bug reported:
The system Ubuntu 24.04 does not detect any microphone. The system is
Lenovo ThinkPad T14 Gen4.
ProblemType: Bug
DistroRelease: Ubuntu 24.04
Package: alsa-base 1.0.25+dfsg-0ubuntu7
ProcVersionSignature: Ubuntu 6.8.0-31.31-generic 6.8.1
Uname: Linux 6.8.0-31-generic x86_64
App
s workarounds are not suitable for the general use and specific as we
- at our firm has to use BT.
Any ideas ?
Best
Jan
** Affects: pulseaudio (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages
@Dmitry I have tried your workaround from #2, but step 8. (the second
hibernate) fails for me with a "Not enough swap space" error message.
On my setup I'm using a swapfile on a Btrfs formatted Logical Volume.
This worked fine in regards of hibernating on Kubuntu 23.10.
--
You received this bug
> Note that the *proper* way to place eth0 into a bridge while also
being under systemd-networkd management is to create a .netdev for the
bridge and assign eth0 to it.
What is the recommended way for Ubuntu's OpenStack offering that
dynamically creates bridges (neutron-linuxbridge-agent)? Not usi
Public bug reported:
We are running an OpenStack installation from Ubuntu's Cloud Archive,
and our computer hosts have their network configured with systemd-
networkd. For example, a bond and several VLANs on top, including two
VLANs used for OpenStack flat networks. We are using neutron-
linuxbri
Public bug reported:
Why dose the Ubuntu debug mirror is again out of sync how should it be
used in a productive environment when every month the mirror is for one
week broken.
libharfbuzz0b-dbgsym : Depends: libharfbuzz0b (= 2.7.4-1ubuntu3) but
2.7.4-1ubuntu3.1 is to be installed
libldap-2.5-
** Package changed: ubuntu-keyring (Ubuntu) => pulseaudio (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/2008469
Title:
ubuntu jammy debug mirror out of sync
** Package changed: pulseaudio (Ubuntu) => ddeb-retriever
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/2008469
Title:
ubuntu jammy debug mirror out of sync
Status in
** Package changed: ubuntu => mesa (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to mesa in Ubuntu.
https://bugs.launchpad.net/bugs/1924757
Title:
Ubuntu debug mirror is out of sync
Status in mesa package in Ubuntu
I just upgraded from Ubuntu 20.10 to Ubuntu 21.04.
Thanks to libffi7, Lutris is working again.
---
I downloaded Lutris using the instructions from
https://lutris.net/downloads/
After Installation, I had issues with Lutris and received the error:
```
Fie "/usr/lib/python3/dist-packages/OpenSSL
Public bug reported:
Progressive memory leak in Xorg. With 16Gb RAM, memory use increases by
about 1% each day according to top. Started at about 1%, now 24% after
nearly 3 weeks. Video driver is i915, uname -m shows x86_64. Ubuntu
20.04, up to date as at 29 May 2021. HDMI connector.
ProblemType:
i did a fresh install of 21.04, not an upgrade.
the same problem.
Doesn't seem to be upgrade related.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in Ubuntu.
https://bugs.launchpad.net/bugs/1931301
Title:
This backport to 18.04 LTS broke all our OpenStack compute nodes. We use
systemd-network to configure interfaces etc. and neutron-linuxbridge-
agent with some flat networks. In this scenario, the neutron agent
creates bridges for the flat networks and assigns them to physical
interfaces based on a
In response to advice 2022_03_20:
jbm@curlew:~/Desktop$ driverless
ipp://EPSON%20ET-2810%20Series._ipp._tcp.local/
jbm@curlew:~/Desktop$ ipptool -tv
ipp://EPSON%20ET-2810%20Series._ipp._tcp.local/ get-printer-attributes.test >
attrs.test
ipptool: Unable to connect to "EPSON ET-2810 Series._ip
Hi Till Kamppeter.
Thanks for looking into my bug report. I have replied via Launchpad,
but wasn't able to confirm that I managed to attach the files you asked
for, so I attach them here, too.
--jan
On 2022-03-20 17:54, Till Kamppeter wrote:
> Could you also attach your file
>
;
> For the "ipptool -tv ..." command do the following:
>
> Run
>
> driverless --std-ipp-uris
>
> You get an URI for your printer in standard IPP format. Please use that
> URI for the "ipptool -tv ..." command of my comment above (comment #2)
> and
your error_log. Please run the
> following command:
>
> ipptool -tv ipp://EPSON0EF3E0.local:631/ipp/print get-printer-
> attributes.test > attrs.txt
>
> and attach attrs.txt.
>
--
Jan Mathisen
Email: jbmi...@gmail.com
Adress: Bispeveien 54B, NO-1362 Hosle
Phone: +47 974
ore bug reports.
>
> Now I need also CUPS error_log output from jobs which succeeded for you
> and also I need the files which you have actually sent, both succeeding
> and failing files. Could you attach these?
>
--
Jan Mathisen
Email: jbmi...@gmail.com
Adress: Bispeveien 54B, N
** Also affects: software-properties (Ubuntu)
Importance: Undecided
Status: New
** No longer affects: software-properties (Ubuntu)
** Also affects: software-properties (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member o
Can reproduce when booting kubuntu-22.04-desktop-amd64.iso in Virtualbox
and on my main installation of Kubuntu 22.04.
Happens both on X11 and Wayland session.
When I try to go to software-sources via Discover or Muon on the live
image (where no user password is set), it simply doesn't launch.
T
Public bug reported:
Using 3.0.2-0ubuntu1.1 on Ubuntu 22.04 (AMD64) I get
```
openssl rmd160 < some-file
Error setting digest
405755EFCF7F:error:0308010C:digital envelope
routines:inner_evp_generic_fetch:unsupported:../crypto/evp/evp_fetch.c:349:Global
default library context, Algorithm (RI
Thanks. Not really a bug thus, I need to provide rmd160 digests in
some workflow. This is a work-around and a good reason to discuss the
issue upstream.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to openssl in Ubuntu.
ht
Is there an official solution to this problem, meanwhile?
I ran into the same problem, but even after reinstalling python3-six,
python3-certifi, python3-requests, python3-idna, and python3-urllib3 I
still can't start software-properties-gtk, getting the message that the
name 'requests_unixsocket'
Public bug reported:
This is a new network printer in my home/local network. It works ok from my
mobile phone and from Windows, but not from Ubuntu 20.04 on the same PC, my
preferred system. I can print the test page consistently via 'Settings -
Printers - Printer Details'; occasionally I hav
27 to 0.27.3-3ubuntu1.4, Gwenview doesn't crash, so
it seems the crash is related to changes in 0.27.3-3ubuntu1.5.
I don't know if the underlying cause is actually some bug in exiv2,
Gwenview or darktable.
Kind regards, Jan
ProblemType: Bug
DistroRelease: Ubuntu 21.04
Packa
(In reply to Jan Rathmann from comment #15)
> For me this seems to be fixed under Kubuntu 21.10 with Gwenview 21.08.2 from
> kubuntu-backports-ppa.
Please disregard this comment - I totally forgot that I had installed a
patched version of exiv2 (with the change described in Comment
Public bug reported:
Ubuntu 20.04.1 running on armv7 (IFC6410)
Occasional network interruption with the following message in journal:
Nov 28 12:03:16 drako NetworkManager[4094]: [1606582996.3983]
device[dabf59d236aff82b] (enp1s0): activation-stage: complete
activate_stage5_ip_config_result_6,
*** This bug is a duplicate of bug 1871794 ***
https://bugs.launchpad.net/bugs/1871794
Problem has NOT been fixed for my setup:
- Kernel: 5.4.0-65-generic
- OS: Kubuntu 20.04.1 LTS
- Machine: Dell Latitude 5501
- Headset: Haylou GT1 Plus
--
You received this bug notification because you are
Public bug reported:
In the 5.5.0-1ubuntu1 version of Ubuntu 20.04.2 LTS it is not possible to flush
any ip addresses.
Test command (executed as root):
ip a flush dev lo
EOF on netlink
Flush terminated
Additional version info.
ip -V
ip utility, iproute2-ss200127
>From looking at a strace output
Thanks a lot for your work, Dan! Unfortunately, I wasn't able to pick up
the new bug from here, sorry for that. (It appears I did not get any
notification on your comments, need to check that)
The bridges are managed by OpenStack Neutron from Ubuntu cloud archives
and with names derived from the n
lated to exiv2.
Temporary workaround:
If I downgrade libexiv2-27 to 0.27.3-3ubuntu1.4, Gwenview doesn't crash, so it
seems the crash is related to changes in 0.27.3-3ubuntu1.5.
I don't know if the underlying cause is actually some bug in exiv2,
Gwenview or darktable.
Kind regards, J
nview doesn't crash, so
it seems the crash is related to changes in 0.27.3-3ubuntu1.5.
I don't know if the underlying cause is actually some bug in exiv2,
Gwenview or darktable.
Kind regards, Jan
ProblemType: Bug
DistroRelease: Ubuntu 21.04
Package: libexiv2-27 0.
27 to 0.27.3-3ubuntu1.4, Gwenview doesn't crash, so
it seems the crash is related to changes in 0.27.3-3ubuntu1.5.
I don't know if the underlying cause is actually some bug in exiv2,
Gwenview or darktable.
Kind regards, Jan
ProblemType: Bug
DistroRelease: Ubuntu 21.04
Packa
in 0.27.3-3ubuntu1.5.
I don't know if the underlying cause is actually some bug in exiv2,
Gwenview or darktable.
Kind regards, Jan
ProblemType: Bug
DistroRelease: Ubuntu 21.04
Package: libexiv2-27 0.27.3-3ubuntu1.5
ProcVersionSignature: Ubuntu 5.11.0-31.33-generic 5.11.22
Uname:
lated to exiv2.
Temporary workaround:
If I downgrade libexiv2-27 to 0.27.3-3ubuntu1.4, Gwenview doesn't crash, so
it seems the crash is related to changes in 0.27.3-3ubuntu1.5.
I don't know if the underlying cause is actually some bug in exiv2,
Gwenview or darktable.
Kind regards, J
> > The fix was revered in bug #1929560, but the behavior will not be reverted
> > in newer releases. Therefore, every reload of systemd-networkd will remove
> > the physical network interface from neutrons bridge.
>
> It looks like the patch was backported to stable releases in that bug; not
>
Public bug reported:
When my system Ubuntu 22.04.2 LTS performs apt dist-upgrade (manually or from
unattended upgrades) and there is an upadte on package qemu-guest-agent, the
agent gets stopped, updated, but is not started.
I observed this behaviour on two machines with same result.
After I ru
*** This bug is a duplicate of bug 1842320 ***
https://bugs.launchpad.net/bugs/1842320
** Also affects: initramfs-tools
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to initramfs
Tried with ubuntu-18.04.2-desktop-amd64. Same error.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1793120
Title:
Ubuntu 18.04.1 Desktop install fails to show try or inst
Public bug reported:
ubuntu 19.04
ProblemType: Bug
DistroRelease: Ubuntu 19.04
Package: xorg 1:7.7+19ubuntu12
ProcVersionSignature: Ubuntu 5.0.0-16.17-generic 5.0.8
Uname: Linux 5.0.0-16-generic x86_64
.tmp.unity_support_test.0:
ApportVersion: 2.20.10-0ubuntu27
Architecture: amd64
BootLog: Erro
I get this upstream on Debian Stretch.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apparmor in Ubuntu.
https://bugs.launchpad.net/bugs/1792027
Title:
evince denied access to mimeapps.list
Status in apparmor package in
I just tested the thing in #123 and I can only conclude: i am writing
this note in 18.04 with nvidia-396 drivers on a Lenovo Y720. So I can
only agree to what Thijs says. This sounds like a timing problem.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded p
Public bug reported:
apport-bug amd64 artful ubuntu
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: xorg 1:7.7+19ubuntu3
ProcVersionSignature: Ubuntu 4.13.0-37.42-lowlatency 4.13.13
Uname: Linux 4.13.0-37-lowlatency x86_64
ApportVersion: 2.20.7-0ubuntu3.7
Architecture: amd64
CompizPlugins:
Public bug reported:
I upgraded from artful to bionic (just run apt update && apt upgrade and
rebooted before testing the below) and since then my sennheiser pxc550
was immediately disconnected after a connect.
Jun 05 15:18:49 PC-SUJ kernel: Bluetooth: hci0: last event is not cmd complete
(0x0f)
apport information
** Attachment added: "rfkill.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149225/+files/rfkill.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "Dependencies.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149215/+files/Dependencies.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149221/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://b
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149222/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149218/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
apport information
** Attachment added: "Lsusb.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149217/+files/Lsusb.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "getfacl.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149224/+files/getfacl.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.
apport information
** Tags added: apport-collected bionic third-party-packages
** Description changed:
I upgraded from artful to bionic (just run apt update && apt upgrade and
rebooted before testing the below) and since then my sennheiser pxc550
was immediately disconnected after a connec
apport information
** Attachment added: "Lspci.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149216/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/b
apport information
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149219/+files/ProcCpuinfoMinimal.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
h
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149223/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "syslog.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149226/+files/syslog.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net
apport information
** Attachment added: "ProcEnviron.txt"
https://bugs.launchpad.net/bugs/1775187/+attachment/5149220/+files/ProcEnviron.txt
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.la
Just chiming in to say that, yes, #19 (with or without #24) works for
me, too.
What I don't get is why this is isn't officially fixed, yet.
The solution is pretty clear by now.
What/who is the bottleneck here?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
Also, what about the other settings (e.g. package blacklist) in that
file? Does/should it preserve those, warn about overwriting them, ...?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to unattended-upgrades in
Ubuntu.
https:
Folks, let's all calm down a bit and try to cooperate...
One of the problems here is that several very useful GUI applications
which have always run as root don't have alternatives to replace them,
but also they don't have the developers available to convert to a non-
root frontend + root backend
#x27;.
Okt 21 12:13:12 ubuntu systemd[1]: Started Network Name Resolution.
Kind regards,
Jan
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: systemd 234-2ubuntu12
ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
Uname: Linux 4.13.0-16-generic x86_64
ApportVersion: 2.20
#x27;.
Okt 21 12:13:12 ubuntu systemd[1]: Started Network Name Resolution.
Kind regards,
Jan
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: systemd 234-2ubuntu12
ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
Uname: Linux 4.13.0-16-generic x86_64
ApportVersion: 2
See also: https://bugzilla.gnome.org/show_bug.cgi?id=773126
** Bug watch added: GNOME Bug Tracker #773126
https://bugzilla.gnome.org/show_bug.cgi?id=773126
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to network-manager in
I have just wasted 16 pages of paper.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to qtbase-opensource-src in
Ubuntu.
https://bugs.launchpad.net/bugs/1776173
Title:
qt print dialog shipped with bionic ignores printer defau
Public bug reported:
When I try to install Ubuntu 18.04 (replacing rather than updating
16.04) on my HP Pavilion dv7 6080eo laptop, which currently runs Windows
in dual boot with Ubuntu 16.04 LTS for amd64, I never get the screen
with the Try Ubuntu or Install Ubuntu choice. Instead the GUI drops
Same problem for me...
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1784485
Title:
[ZenBook S UX391UA, Realtek ALC294, Mic, Internal] No sound at all
Status in alsa
This still happens on a Dell Latitude E6430 with docking station and two
external DVI monitors running Linux Mint 19 (based on Ubuntu Bionic)
ii systemd 237-3ubuntu10.3 amd64system and service
manager
ii systemd-sysv 237-3ubuntu10.3 amd64s
ink:
https://www.redhat.com/archives/libvirt-users/2018-October/msg00059.html
I'll add a response there soon.
Best Regards
Jan
Am 06.11.18 um 15:48 schrieb Christian Ehrhardt :
> I now used:
> filter =[ "a|/dev/disk/by-path/virtio-pci-*|" ]
>
> Now it really is the sam
Was working in Ubuntu 17.04, broken after upgrade to 17.10, installing
signon-ui from the PPA
(0.17+17.10.20171027+really20160406-0ubuntu1~ppa1) resolved this for me.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to signon-ui i
I think this bug caused the upgrade from 7.04 to 7.10 fail on my system,
telling me that the system may be in an unstable state. Really annoying.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to apt in Ubuntu.
https://bugs.laun
I tested on Trusty: iproute2_3.12.0-2ubuntu1.1_amd64.deb fixed the bug.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iproute2 in Ubuntu.
https://bugs.launchpad.net/bugs/1720126
Title:
[ip link] Message truncated error fo
** Tags removed: verification-needed
** Tags added: verification-done
** Tags removed: verification-needed-trusty verification-needed-xenial
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iproute2 in Ubuntu.
https://bugs.lau
** Tags removed: verification-needed-trusty
** Tags added: verification-done-trusty
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iproute2 in Ubuntu.
https://bugs.launchpad.net/bugs/1720126
Title:
[ip link] Message trunca
@arges
Hi, would you need any more testing from us?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to iproute2 in Ubuntu.
https://bugs.launchpad.net/bugs/1720126
Title:
[ip link] Message truncated error for large number of p
Public bug reported:
When ripping a CD to the FLAC format with Sound Juicer (and based on the
upstream bug also Rhythmbox, and maybe also affects other applications),
it creates corrupted files (e.g. when you test them with "flac -t").
** Affects: gst-plugins-good
Importance: Unknown
Pest or cholera, really.
This is the first problem I had with Nvidia drivers on linux.
With my previous AMD graphics cards I couldn't even play most games without
severe graphics issues.
Not even talking about AMD cards barely receiving specific support from
game/engine devs in general in contras
Looks like it is a duplicate. I've marked it as such.
Regards
Jan
On 20 October 2015 at 20:28, Daniel <1504...@bugs.launchpad.net> wrote:
> I see a connection to
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1507959. is it a
> duplicate?
>
> --
> You r
Public bug reported:
TEST CASE #1:
1. Open dialer-app
2. Select "Contacts" icon
3. Select "Favorites"
4. Select a contact
5. Quickly select contact's phone number
6. Selected number is put into the dial pad screen
EXPECTED RESULT:
dialer-app allows You to dial the number
ACTUAL RES
The fix is already released. Update lxc, then update the kernel.
Regards,
Jan
On 22 October 2015 at 17:44, Paul Sokolovsky <1504...@bugs.launchpad.net>
wrote:
> I got hit by the same issue, with the same unlucky kernel (installed
> from normal update channel):
>
> root@x230:~
Public bug reported:
After resuming from sleep, the login screen seems to be a collage of
different fragments from the desktop before going to sleep.
This is a regression from 15.04 where it worked perfectly :-)
Inputing the password and hitting enter brings up the desktop as
expected, so it wou
** Package changed: ubuntu => indicator-datetime (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to indicator-datetime in
Ubuntu.
https://bugs.launchpad.net/bugs/1510055
Title:
indicator-datetime hangs on changing or
Today, it's elected to be plain blue - instead of mosaic/collage. :-)
Interestingly this happens when choosing "Suspend" from a logged in session.
If I lock the screen (to the "Switch user" screen) and select suspend, then
resume is all fine.
My graphics card is:
jhb@ThinkPad-W510:~$ lspci | g
I'm not sure, but I think it's the greeter lock screen.
I suspend the laptop, then resume - and have it set up to demand password
validation?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lightdm in Ubuntu.
https://bugs.lau
1 - 100 of 325 matches
Mail list logo
