Let's try it another way. With the PC turned on, disconnect the USB cable
that is connected to the PC and reconnect it to the PC. Run this command in
CMD:
dmesg
and paste the last 10 lines here.
El dom, 29 may 2022 a las 4:24, Ed () escribió:
> On Sun, 29 May 2022 11:10:21 +0800
> Onno VK6FLAB
You can run cwdaemon in dummy mode and disconnect it from the USB device so
you can test.
cwdaemon --cwdevice=null --nofork -i --system=n
--
finger painting on glass is an inexact art - apologies for any errors in
this scra^Hibble
()/)/)() ..ASCII for Onno..
On Sun, 29 May 2022, 11:24 Ed, wro
On Sun, 29 May 2022 11:10:21 +0800
Onno VK6FLAB wrote:
> I suspect that it means that tlf isn't talking to cwdaemon.
>
You are 100% correct.
Ed W3NR
I suspect that it means that tlf isn't talking to cwdaemon.
--
finger painting on glass is an inexact art - apologies for any errors in
this scra^Hibble
()/)/)() ..ASCII for Onno..
On Sun, 29 May 2022, 08:40 Ed, wrote:
> On Sun, 29 May 2022 07:23:26 +0800
> Onno VK6FLAB wrote:
>
> > cwdaemon
On Sun, 29 May 2022 07:23:26 +0800
Onno VK6FLAB wrote:
> cwdaemon has a debug mode.
>
> Launch it on a separate console window with debug turned on.
>
> Then launch tlf.
>
> You should see what's going on.
>
I've already tried that and there was no output.
Thanks
Ed W3NR
On Sat, 28 May 2022 19:47:26 -0400
Gary Grebus wrote:
>
> On the IC-7300, what do you have configured on Connectors->USB
> Send/Keying->USB Keying (CW) ? Mine is set to DTR (although I don't
> see anything in the cwdaemon man page that mentions how it uses the
> modem control signals).
>
On 5/28/22 14:30, Ed wrote:
I cannot get cwdaemon to work, no matter what I have tried. It starts
at boot using USB0, it's listed in tlf -v . tlf seems normal, rig
control and spots are good. Bandmap is full. But no CW from any F key.
Here is my logcfg settings
NETKEYER
NETKEYERPORT=6789
NETKEY
cwdaemon has a debug mode.
Launch it on a separate console window with debug turned on.
Then launch tlf.
You should see what's going on.
--
finger painting on glass is an inexact art - apologies for any errors in
this scra^Hibble
()/)/)() ..ASCII for Onno..
On Sun, 29 May 2022, 02:30 Ed, wro
