Hi,
I've setup a wlan ap using a an alix 2d2 (AMD Geode LX 500 Mhz + AES
Offload)
and am now trying to encapsulate the wlan traffic into a vpn (tap bridge).
Though even when disabling crypto and digest (there is a crypto engine
onboard
can be setup to handle tinc encryption), the best throughput
Hi Mike,
Mike Bentzen schrieb:
> You could try turning compression off, but will probably result in more
> bandwidth being used.
> But you might see a performance increase.
thanks for that hint but I didn't enable compression in the config file
so according to the man page there shouldn't be any
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Ramses II schrieb:
> But you don't are working with the wrt54gl router, isn't it?
you're right, but question was about bridging and tagging.
>
> Can you be most explicit with your config?.
wlan0:
> brctl show
br0: eth2 tinc
> vconfig:
vlan8
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ramses II schrieb:
> Michael, do you try tell me that each vlan should be in a separate bridge
> and then create a tinc vpn associating each tinc vpn interface with one
> bridge?
No, the console output I posted should have indicated that
bridge br0 is
