I use sip:[X:X:X:X::X:1]:5060 format, it works fine to me.
On Thursday, February 16, 2017 02:25:29 AM Joel Serrano | VOZELIA wrote:
> Hi,
>
> What is the correct format for the dispatcher.list file using IPv6?
>
> I have the following file:
>
> $ cat /etc/kamailio/dispatcher.list
> # $Id$
> # d
Sergey, these days Rtpproxy can also do ipv4-ipv6 gatewaying, media
pinning/topology hiding, session recording, MOH/prompt injection, media
timeout notification, media accounting generation and stats collection.
As far as original question goes, I suggest you guys check some IPv6
scenarios availa
Why do you need rtpproxy for IPv6 first of all? Rtpproxy was invented to avoid
ipv4 NAT issues, NAT should not be used with IPv6.
On Tuesday 07 June 2016 15:11:19 aman jeff wrote:
> Hi team,
>
> How to do the Configuration of Kamailio+RTP-Proxy for SER in IPv6,
> Currently I can establish SIP Se
Hello,
do you need to communicate between ipv6 and ipv6, or between two ipv6
clients?
Cheers,
Daniel
On 03/06/16 07:39, aman jeff wrote:
> Hi Team,
>
> How to configure rtp proxy for IPv6 Only client,now we are not able to
> get the audio,
> Please help
>
>
> Regards
> Arnab
>
>
> _
Hi Team,
How to configure rtp proxy for IPv6 Only client,now we are not able to get
the audio,
Please help
Regards
Arnab
On Mon, Jun 6, 2016 at 12:49 PM, aman jeff wrote:
> Hi Team,
>
>
> The SIP packets are fine ,we are able to establish SIP session ,
>
> As long the RTP Proxy not get involv
Hello,
did you get a core dump file? If yes, send the full backtrace taken with
gdb.
Cheers,
Daniel
On 15/12/14 23:10, Kees Meijs - SIGNET B.V. wrote:
> Hi there,
>
> Another follow-up, I suspect there's something wrong in the mt.so module:
>
>> Dec 15 19:31:36 somehost kernel: [8146926.603262]
Hi there,
Another follow-up, I suspect there's something wrong in the mt.so module:
Dec 15 19:31:36 somehost kernel: [8146926.603262] kamailio[852]:
segfault at 1b ip 7f92282f62f8 sp 7622f8f0 error 6 in
tm.so[7f92282b+9b000]
Dec 15 19:32:06 somehost kernel: [8146956.289281] kam
Hello,
On 15/12/14 22:25, Kees Meijs - SIGNET B.V. wrote:
> Good evening,
>
> During pre-production testing, we discovered quite odd IPv6 socket
> issues. Problems arise when a SIP dialog is initiated from within
> Kamailio (e.g. a SIP INVITE message).
>
> Using ngrep, it seems very odd IPv6 socke
Hi,
Mea culpa; I forgot to mention we're using t_relay().
Cheers,
Kees
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hello,
On 10/16/12 1:37 PM, Alex Hermann wrote:
On Monday 15 October 2012, Daniel-Constantin Mierla wrote:
On 10/11/12 2:11 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
DEBUG: [dns_cache.c:567]: dns_hash_find([IPv6 Address](30), 1),
h=707 DEBUG: [resol
On Thursday 11 October 2012, Alex Hermann wrote:
> I am using the dispatcher module with a database table shared among
> multiple proxies. Some proxies do both IPv4 and IPv6, others only do IPv4.
> The problem is when i use an IPv6 address in the dispatcher table. Then
> the IPv4-only proxies fail
On Monday 15 October 2012, Daniel-Constantin Mierla wrote:
> On 10/11/12 2:11 PM, Alex Hermann wrote:
> > On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
> > DEBUG: [dns_cache.c:567]: dns_hash_find([IPv6 Address](30), 1),
> > h=707 DEBUG: [resolve.c:727]: get_record: lookup([IPv6 Ad
On Monday 15 October 2012, Daniel-Constantin Mierla wrote:
> On 10/11/12 2:11 PM, Alex Hermann wrote:
> > On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
> > DEBUG: [dns_cache.c:567]: dns_hash_find([IPv6 Address](30), 1),
> > h=707 DEBUG: [resolve.c:727]: get_record: lookup([IPv6 Add
On 10/11/12 2:11 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
On 10/11/12 12:00 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
Do you get any other error/debug
message before that can give an hint why is failing?
U
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
> On 10/11/12 12:00 PM, Alex Hermann wrote:
> > On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
> >> Do you get any other error/debug
> >> message before that can give an hint why is failing?
> >
> > Unfortunately not.
>
>
On 10/11/12 12:00 PM, Alex Hermann wrote:
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
is USE_IPV6 compile flag still on?
Yes, the exact same verion is used on the IPv4 and IPv6 proxy processes.
They're even on the same host.
Do you get any other error/debug
message before t
On Thursday 11 October 2012, Daniel-Constantin Mierla wrote:
> is USE_IPV6 compile flag still on?
Yes, the exact same verion is used on the IPv4 and IPv6 proxy processes.
They're even on the same host.
> Do you get any other error/debug
> message before that can give an hint why is failing?
Un
Hello,
is USE_IPV6 compile flag still on? Do you get any other error/debug
message before that can give an hint why is failing?
Cheers,
Daniel
On 10/11/12 10:53 AM, Alex Hermann wrote:
Hello,
I am using the dispatcher module with a database table shared among multiple
proxies. Some proxie
Hello,
On 5/23/11 7:24 PM, Jon Farmer wrote:
On 20 May 2011 17:54, Daniel-Constantin Mierla wrote:
ok, let me know how is going with the testing of ipv6 -- the support is in
core since 2002, but not many entered the challenge so far :-)
Cheers,
Daniel
So today I got one phone with an IPv4 a
On Monday 23 May 2011, Jon Farmer wrote:
> > ok, let me know how is going with the testing of ipv6 -- the support is
> > in core since 2002, but not many entered the challenge so far :-)
>
> So today I got one phone with an IPv4 address and another with a IPv6
> address to register to the the same
On 20 May 2011 17:54, Daniel-Constantin Mierla wrote:
> ok, let me know how is going with the testing of ipv6 -- the support is in
> core since 2002, but not many entered the challenge so far :-)
> Cheers,
> Daniel
>
So today I got one phone with an IPv4 address and another with a IPv6
address t
On 05/20/2011 12:54 PM, Daniel-Constantin Mierla wrote:
the support is in core since 2002, but not many entered the challenge
so far :-)
That's a fairly apt metaphor for the state of IPv6 adoption as a whole. :)
--
Alex Balashov - Principal
Evariste Systems LLC
260 Peachtree Street NW
Suite 2
On 5/20/11 6:33 PM, Jon Farmer wrote:
On 20 May 2011 17:25, Daniel-Constantin Mierla wrote:
the module is good, but not for this case -- the warning seems to be from
startup, saying that no reverse dns could be done to the ipv6 listen address
and it is harmless (done for the purpose of build
On 5/20/11 5:42 PM, Timo Reimann wrote:
Hey Jon,
On 20.05.2011 17:31, Jon Farmer wrote:
How do I represent the following if the address was IPv6?
if(src_ip ==127.0.0.1)
If I specify the IPv6 address with our without [] I get
WARNING:core:fix_socket_list: could not rev. resolve
Maybe Iñak
Hey Jon,
On 20.05.2011 17:31, Jon Farmer wrote:
> How do I represent the following if the address was IPv6?
>
> if(src_ip ==127.0.0.1)
>
> If I specify the IPv6 address with our without [] I get
>
> WARNING:core:fix_socket_list: could not rev. resolve
Maybe Iñaki's brand new ipops module is
users@lists.sip-router.org
> Subject: Re: [SR-Users] Ipv6 SIP UA
>
> You are right! There are actually 2 issues with pjsip:
>
> - UDP6 transport does not support DNS lookups. Thus you must set an
> outboundproxy with IPv6 address
> - pjsua API does not handle IPv6 media (SDP)
>
sems can be compiled with ipv6 support. does anyone know if can handle
both sip signaling and media over ipv6? if yet, its sbc module might be
a handy gateway between ipv4 and ipv6.
-- juha
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-user
P stack, start pjsua ...
>
> there is no DNS at all
>
> pavel
>
>
>> -Original Message-
>> From: sr-users-boun...@lists.sip-router.org [mailto:sr-users-
>> boun...@lists.sip-router.org] On Behalf Of Klaus Darilion
>> Sent: Thursday, April 21, 2011 1:27
P stack, start pjsua ...
there is no DNS at all
pavel
> -Original Message-
> From: sr-users-boun...@lists.sip-router.org [mailto:sr-users-
> boun...@lists.sip-router.org] On Behalf Of Klaus Darilion
> Sent: Thursday, April 21, 2011 1:27 PM
> To: sr-users@lists.sip-router.org
--Original Message-
>> From: sr-users-boun...@lists.sip-router.org [mailto:sr-users-
>> boun...@lists.sip-router.org] On Behalf Of Klaus Darilion
>> Sent: Wednesday, April 20, 2011 12:49 PM
>> To: sr-users@lists.sip-router.org
>> Subject: Re: [SR-Users] Ipv6 SIP UA
>>
IP Router - Kamailio (OpenSER) and SIP Express Router (SER) -
> Users Mailing List'
> Subject: Re: [SR-Users] Ipv6 SIP UA
>
> Hi Klaus,
>
> I'm testing your QJSimple client and I'm observing following problems.
> In a IPv4 environments (win 7/32 or 64bit), the
> -Original Message-
> From: sr-users-boun...@lists.sip-router.org [mailto:sr-users-
> boun...@lists.sip-router.org] On Behalf Of Klaus Darilion
> Sent: Wednesday, April 20, 2011 12:49 PM
> To: sr-users@lists.sip-router.org
> Subject: Re: [SR-Users] Ipv6 SIP UA
>
Am 20.04.2011 11:01, schrieb Pavel Segeč:
> Hi,
>
> yes I can agree now, linphone is working well, qjsimple has some problem
If you find some problems (except that it does not work over TCL/TLS:
http://trac.pjsip.org/repos/ticket/1127) please let me know.
klaus
___
Behalf Of Schumann Sebastian
> Sent: Tuesday, April 19, 2011 10:32 AM
> To: 'dan...@kamailio.org'; 'SIP Router - Kamailio (OpenSER) and SIP
> Express Router (SER) - Users Mailing List'
> Subject: Re: [SR-Users] Ipv6 SIP UA
>
> Hi
> Dan York tested Linphone, see
ailing List
> Subject: Re: [SR-Users] Ipv6 SIP UA
>
> Hello,
>
> On 4/19/11 9:58 AM, Pavel Segeč wrote:
> > Hi,
> >
> > may someone help me and recommend a software SIP client with a good IPv6
> > support implemented? I tried Xlite, Bria, Linphone, SIP commu
I once wrote a SIP client based on pjsip:
http://www.ipcom.at/en/telephony/qjsimple/
AFAIK it works will using IPv6 when using UDP.
regards
Klaus
Am 19.04.2011 09:58, schrieb Pavel Segeč:
> Hi,
>
> may someone help me and recommend a software SIP client with a good IPv6
> support implemented? I
19 apr 2011 kl. 10.19 skrev Daniel-Constantin Mierla:
> Hello,
>
> On 4/19/11 9:58 AM, Pavel Segeč wrote:
>> Hi,
>>
>> may someone help me and recommend a software SIP client with a good IPv6
>> support implemented? I tried Xlite, Bria, Linphone, SIP communicator and
>> Jitsi but with a bad res
Hello,
On 4/19/11 9:58 AM, Pavel Segeč wrote:
Hi,
may someone help me and recommend a software SIP client with a good IPv6
support implemented? I tried Xlite, Bria, Linphone, SIP communicator and
Jitsi but with a bad results. Each have some problem within pure IPv6
environment.
the last sipit I
38 matches
Mail list logo
