Hello,
if you are looking at sharing the same destination addresses, many
kamailio can connect to the same database.
If you have active-active LBs want to notify the other LB about a change
in a state of a destination, then you can use the event_route blocks
executed by dispatcher module to notif
Hi,
I am using Kamailio as a load balancer with call load distribution to
Freeswitch Gateways. I need a HA cluster of Kamailio. I have seen
instructions to setup Kamailio HA cluster using KeepAlive but I also want
them to share the load balancing information. I have seen OpenSIPS supports
this. Is
.tr...@pocos.nl
> To: sr-users@lists.sip-router.org
> Date: Tue, 14 Jul 2015 13:53:25 +0200
> Subject: Re: [SR-Users] Kamailio Load balancing Across Multiple Asterisk
> Servers -Chanspy
>
> On Tuesday 14 July 2015 11:29:34 Jonathan Hunter wrote:
> > No such extension/contex
On Tuesday 14 July 2015 11:29:34 Jonathan Hunter wrote:
> No such extension/context *1022-MAGNORTH13@from-outside while calling
> Local channel[2015-07-14 10:49:38] NOTICE[15318]: app_dial.c:1003
> do_forward: Forwarding failed to dial
> 'Local/*1022-MAGNORTH13@from-outside'
This sounds l
and it allowed
connection, I will try that.
I will also consider your other option.
Many thanks for the prompt response.
Jon
> From: d.tr...@pocos.nl
> To: sr-users@lists.sip-router.org
> Date: Tue, 14 Jul 2015 13:19:48 +0200
> Subject: Re: [SR-Users] Kamailio Load balancing Across Multip
On Tuesday 14 July 2015 11:04:59 Jonathan Hunter wrote:
> The problem I have is when I send an INVITE from Asterisk Server, and then
> kamailio sends an INVITE back to the same Asterisk Server I get the
> following failure in asterisk console;
Is it just a warning or does the chanspy fail?
You
Hi guys,
I have a kamailio load balancing requests across 2 Asterisk Servers, and all is
working well.
Only problem now is when utilizing feature codes to look to listen into calls
using the chanspy application I am having issues.
I am passing calls to * into Asterisk, where an IVR answers th
Hello Eric,
You need to multihome Kamailio so that it is simultaneously present on
the external and internal interfaces:
listen=udp:external.ip:5060
listen=udp:internal.ip:5060
Then, you need to force requests forwarded to the Asterisk boxes to go
out the internal interface explicitly.
Hi
I have two boxes with internal and external interfaces. Each has Kamailio at
the public interface and asterisk on the internal one.
Making calls within a box is fine but would like to load balance using the
other asterisk box.
However using dispatcher I have noticed packets are not being rou
As written many time in this mailing list it depends on what services
you want to provide using such "voice servers". If they are transparent
media relays then rtpproxy or mediaproxy(-ng) can help. Also you can
integrate it with your billing to authorize calls and limit their duration.
Though
Hello, I have a question about the load balancing module of kamailio.
As the site http://kb.asipto.com/ say, Kamailio is as a SIP proxy router to
scale Asterisk.
Can I run a kamailio instance as load balancer, and other several instances
as voice server replace of Asterisk?
If I can do that, coul
Hi everyone,
I am a beginner in using Kamailio. I am currently building a load balancer
for multiple SIP Servers, all of them are Kamailio. The Load balancer can
help end-users REGISTER and INVITE normally, but has problems with ACK and
BYE.
Messages 180 Ringing and 200 OK sent successfully
Hi everyone,
I am a beginner in using Kamailio. I am currently building a load balancer
for multiple SIP Servers, all of them are Kamailio. The Load balancer can
help end-users REGISTER and INVITE normally, but has problems with ACK and
BYE.
Messages 180 Ringing and 200 OK sent successfully
13 matches
Mail list logo
