Hi Ovidiu
Think I've cracked it. Thanks for your help!
Now to see if I can find a way to set the status when a phone subscribes. At
the moment it only updates when a new call is made.
Cheers
Mark
On 29 Nov 2012, at 19:57, Ovidiu Sas wrote:
> You need to load pua_dialoginfo and configure t
You need to load pua_dialoginfo and configure the server accordingly:
http://kamailio.org/docs/modules/devel/modules_k/pua_dialoginfo.html
Take a look at the overview section to have an idea about
notifications are triggered:
http://kamailio.org/docs/modules/devel/modules_k/presence_dialoginfo.htm
Hi Ovidiu
I see the following;
- Phone registers
- Phone subscribes / Kamailio sends 200 OK
- PBX immediately responds with a Notify / Phone sends 200 OK
If I now make a call on the phone which is being watched by the subscription
Kamailio doesn't generate any notify.
Is there something I
Do you see a subscription from the phone?
A SUBSCRIBE message being sent when the phone registers?
-ovidiu
On Thu, Nov 29, 2012 at 1:52 PM, Mark Boyce wrote:
> Hi All
>
> I'm slowly working out what goes where with this. So far I have;
>
> The Linksys / Cisco SCA / Shared Call Appearance requir
Hi All
I'm slowly working out what goes where with this. So far I have;
The Linksys / Cisco SCA / Shared Call Appearance requires Andrews SCA module
not the standard presence ones. This is the feature on the phone which was
generating the call-info events.
With SCA turned off on the phones a
On Nov 27, 2012, at 2:51 PM, Mark Boyce wrote:
> Hi Andrew
>
> Thanks for that, I'll give it a go.
>
> Would the module work with stable branch or do I need to compile up master?
It should work with the stable branch.
andrew
>
> On 27 Nov 2012, at 19:44, Andrew Mortensen wrote:
>
>> I
Hi Andrew
Thanks for that, I'll give it a go.
Would the module work with stable branch or do I need to compile up master?
Best regards
Mark
--
Mark Boyce
On 27 Nov 2012, at 19:44, Andrew Mortensen wrote:
> I recently added an SCA module to the project. If you're willing to try the
> maste
I recently added an SCA module to the project. If you're willing to try the
master branch, I'd appreciate hearing how things work for you.
Here are instructions for building from the git repository:
http://www.kamailio.org/wiki/install/devel/git
Add "sca" to the include_modules value in
Hi All,
I've been trying to get some Cisco/Linksys SPA phones working with Kamailio
(current stable). All seems to be ok apart from getting Presence/BLF/SCA
working.
The phones are set to
Server_Type : RFC3265_4235
Line Key 2 Extension : Disabled
Line Key 2 Sha
