Re: [SR-Users] Cisco 79XX Series Phones and TLS integration with kamailio

Hi Jon Thanks for that. Trying to translate between the txt version and the xml version, most of the settings seem to be about right. I think the problem might be with the way we’re referring to the sip server in the xml. The previous advice I got was to do it using the call manager section

Re: [SR-Users] Cisco 79XX Series Phones and TLS integration with kamailio

Hi Jon I’m working with a variety of routers here at the moment (testing / lab environment :-) ranging from Mikrotik, Draytek to Firebricks. So far; - Phone on test is a 7970 - Variety of routers here at the moment (testing / lab environment :-) ranging from Mikrotik, Draytek to Firebricks.

Re: [SR-Users] Cisco 79XX Series Phones and TLS integration with kamailio

Hi Jon It sounds like you’re a few steps in front of me. I’m just starting to try and get a working set of config files etc for provisioning to the phones. Which at the moment is going through the motions of registering but not actually sending anything. Would you mind sharing your experienc

[SR-Users] Issue with app_perl - return value, logging and append_branch

Hi All I may well be me missing something obvious but I have got three odd ones whilst trying to test app_perl module which I'd appreciate some assistance with. Setup Kamailio version: 4.0.0 (x86_64/linux) from Peter Dunkley's YUM Repository Perl version: v5.

[SR-Users] Handling 302 redirect on group ringing

Hi All Got a problem handling redirects when more than one phone is ringing. The setup is this; Phone1 - Extension 100 Phone 2 - Extension 101 Phone 3 - Extension 102 & 101 When Phone 1 rings Extension 101 Phones 2 & 3 ring correctly as you would expect. If Phone 2 now sets the on phone forw

[SR-Users] Call pickup through a NAT

Hi All, I've hit my next stumbling block on my mission to get BLF/Call pickup working on Linksys/Cisco phones which are behind a NAT working with Kamailio. I'm using RFC 3265 and pua_dialoginfo to handle subscribes from phones and generate notify packets on status change. The phones are on two

Re: [SR-Users] Presence on Cisco/Linksys handsets

> > > -ovidiu > > On Thu, Nov 29, 2012 at 2:19 PM, Mark Boyce wrote: >> Hi Ovidiu >> >> I see the following; >> >> - Phone registers >> >> - Phone subscribes / Kamailio sends 200 OK >> >> - PBX immediately responds with a Not

Re: [SR-Users] Presence on Cisco/Linksys handsets

ing I need to drop in the INVITE logic to trigger the notify? At the moment I'm loading presence.so and presence_dialoginfo.so modules with a config which is pretty much the same as the shipped sample config. Cheers Mark -- Mark Boyce On 29 Nov 2012, at 19:09, Ovidiu Sas wrote: >

Re: [SR-Users] Presence on Cisco/Linksys handsets

cs it looks like presence_dialoginfo should be doing this but isn't. What have I missed? Cheers Mark -- Mark Boyce On 27 Nov 2012, at 19:44, Andrew Mortensen wrote: > I recently added an SCA module to the project. If you're willing to try the > master branch, I'd app

Re: [SR-Users] Presence on Cisco/Linksys handsets

Hi Andrew Thanks for that, I'll give it a go. Would the module work with stable branch or do I need to compile up master? Best regards Mark -- Mark Boyce On 27 Nov 2012, at 19:44, Andrew Mortensen wrote: > I recently added an SCA module to the project. If you're willi

[SR-Users] Presence on Cisco/Linksys handsets

Hi All, I've been trying to get some Cisco/Linksys SPA phones working with Kamailio (current stable). All seems to be ok apart from getting Presence/BLF/SCA working. The phones are set to Server_Type : RFC3265_4235 Line Key 2 Extension : Disabled Line Key 2 Sha