Hi All,
I have CNXCC setup, it is kind of working but when I run kamcmd
cnxcc.check_client the call information is still there even when the call
is disconnected. Is this right?
I basically want to make sure a customer can only have x number of
simultaneous calls.
Thanks
Keith
Hi Guys,
Trying to use cnxcc but cnxcc.so is not in the modules folder. What is the
easiest way to install?
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip
I now have it registered but when I try and send a call it comes back
unauthorised.
I'm not sure how to send the invite using that authenticated user??
Keith
On Wed, Aug 5, 2015 at 12:42 PM, M S wrote:
> Perhaps the uuid you are giving to mi command is incorrect. You can look
>
Yeah the UUID matches that in the database.
I have an extension registered and what the dial to pass out through this
externally registered account.
Keith
On Wed, Aug 5, 2015 at 12:42 PM, M S wrote:
> Perhaps the uuid you are giving to mi command is incorrect. You can look
> at the db
Hi,
So I can see the registration attempt now, and I get a 200OK back, but when
I run:
kamcmd uac.reg_info l_uuid (UUID here)
I don't see anything, just a blank line is returned?
Thanks
Keith
On Tue, Aug 4, 2015 at 12:19 PM, M S wrote:
> Make sure to enable and set reg_timer_inte
quot;uac", "reg_timer_interval", 60)
modparam("uac", "reg_retry_interval", 30)
modparam("uac", "reg_db_table", "uacreg")
modparam("uac", "reg_contact_addr", "x.x.x.x:5060")
Apart from this, is there anything el
Thanks, i'll make sure those settings are in.
So if I add the account to the table, how do I make sure the outbound call
uses that account?
Thanks
Keith
On Tue, Aug 4, 2015 at 12:19 PM, M S wrote:
> Make sure to enable and set reg_timer_interval and reg_retry_interval
> ap
Thanks for the quick response. I have already tried to use the db method
but can't see the registration requests going out. Is there something you
have to do to force the registration attempts?
Thanks
Keith
On Tue, Aug 4, 2015 at 11:48 AM, M S wrote:
> If you have just one or two
Hi,
I have a carrier who require registration, I have looked at the uac module
but can't see how to do this.
Anyone point me in the right direction?
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-
number.
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
I am using drouting but having issues when trying to route numbers in E164
in the prefix. Any ideas how to allow for a + in the prefix field in the DB?
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr
Hi,
I want to do LCR based on from uri. I get I need to do regular expression
matching but have no idea where to look to start.
Any pointers would be good.
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr
Hi,
So when I use the uac_reg_request_to, for some reason it sends an invite
and not a register?? This means I'm not getting a 407 back to the use
sac_auth in the failure route.
Any ideas?
Thanks
Keith
___
SIP Express Router (SER) and Kam
Hi,
Thanks Daniel, however don't I need to send a register to get the 401 back?
If so how do I do this bit?
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://list
Hi,
I have a carrier who requires SIP authentication on calls, can anyone point
me in the right direction? Normally in Asterisk or Freeswitch you can
authenticate a peer, but can't see how to do this in Kamailio.
Thanks
Keith
___
SIP Express R
based on the destination the call
is being sent to?
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
of them to enable me to get the functionality
required.
Any ideas/pointers?
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi all,
So I moved away from LCR and dispatcher to use drouting but I can't see how
to use probing. In OpenSIPS I can see this is built into the module but
it's not in Kamailio.
Any ideas how I can get round this? I want to use drouting for all my
routing needs.
Ch
Hi,
Or is it possible to use a regular expression for the user?
I basically want certain users to use a certain route without having to add
them all in.
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users
Hi,
I am trying to use the drouting module and was wondering if there is a
wildcard character for the dr_groups table for the user?
My situation is that I want to look at any user from a certain IP range
(i.e. the carrier).
Any ideas?
Thanks
Keith
table
in some way as those users have authenticated?
Any ideas would be appreciated.
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr
Hi,
I am having issues with trying to use multiple lcr_ids so I can route to
different groups. When I reload lcr it always only shows one group. I have
copied the first group exactly and just changed the number but can't work
out why it's not working.
Any ideas?
Th
freeswitch box.
Any help appreciated.
Cheers.
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi
Yeah I do already use the lcr module for routing to external carriers but
is probably a little overkill for what I need to route that traffic
internally. Is that my only real option?
Cheers
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER
Hi all,
I am looking for the best module to route calls based on the authenticated
user that call came from and the destination number. Is there any current
module to do this?
Many thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr
this was set it now holds the call open for longer than 30 seconds,
fingers crossed it's all good!
Thanks again, hope this is of some help to someone else.
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@list
Hi,
Thanks for the replies so far, good news is I got it working by switching
off mhomed (mhomed=0). However this seems to have broken my dispatcher as
the SIP OPTIONS probing is being sent from the wrong interface!
Any ideas how to set where dispatcher sends these from??
Cheers
Keith
due to the failure
to respond).
Cheers
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
I have a kamailio server which is responding to SIP updates but sending
from the wrong IP. I have multiple IPs in the same subnet on the same NIC.
Is there anyway to say send update back out of the interface it was
received on?
Thanks.
Keith
get routed properly.
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
I have a trunk trying to connect to Kamailio but when it sends me OPTIONS I
am not replying with 200 OK.
This trunk is no authenticated in any way.
Any ideas?
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr
Hi,
Yeah sorry, I had to restart it as it's a production box. I have the log
file which I can show you?
Cheers
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-route
Hi,
Here are the details:
Version: 4.02
*kamcmd pkg.stats:*
{
entry: 0
pid: 15738
rank: 0
used: 1521632
free: 2504528
real_used: 1689776
}
{
entry: 1
pid: 15745
rank: 1
used: 1530112
free: 2495248
r
Hi,
Not sure if this is a bug or config but getting this error message:
insert_subst_lump_after(): ERROR: insert_new_lump_after: out of memory
Any ideas?
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users
Hi,
I am using LCR module to send outbound calls to my carrier, however I am
using a new carrier who require authentication. Any ideas on how to
authenticate the call to the carrier?
Thanks
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr
Hi All,
I know there are some products out there but I'm looking for a very basic
way to store in a database the SIP call journey including errors etc.
Anyone have any ideas?
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-
Thanks for the info guys, unfortunately it's not sending the from ip
address properly now. I am using dispatcher to route these calls so not
sure if the $fs is working properly?
Any more ideas?
Thanks
Keith
___
SIP Express Router (SER) and Kam
ormat.
Any ideas?
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Thanks for the quick reply, i'll have a look at that! I am also keen to log
SIP invite errors etc, is this normally shown in the CDR table?
Cheers
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@list
hanks, as always.
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Thanks, but I need to restrict based on registered user, i.e. some users
will be able to dial those numbers others wont.
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http
Hi,
I want to build in a Class of Restriction in Kamailio so I can allow/deny
calls to numbers (countries) based on the caller CLI. Ideally I want to do
this in the db but not sure the best way or if there is something to do
this already?
Cheers.
Keith
Hi,
I am looking to use SNMP with Zabbix to monitor Kamailio. However the
module is not in the directory so won't load. I built Kamailio from YUM, is
there amyway I can include the SNMP module without having to reinstall?
Thanks,
Keith
___
SIP Ex
Ahhh, cool. Well the db is mysql and sits on the same box so probably fine.
Just don't really know.
I'll keep this in mind and apply if needed.
Thanks for all your help, amazing!
Keith
On Mon, Oct 14, 2013 at 3:46 PM, Klaus Darilion <
klaus.mailingli...@pernau.at> wrote:
>
&
Many thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Hi,
Can anyone point me in the right direction for setting up SIP trunks?
Whenever I send a call to a registered user on a trunk it just sends to
destination s@x.x.x.x. Is there anyway to say "these extensions are
location at this destination IP and port".
Che
Hi,
Wonder if anyone can point me in the right direction, or explain a bit more
about how the code in Kamailio works. I am looking to build a front end to
Kamailio so I can easily add routes etc without direct access to the config.
Thanks,
Keith
Thanks for looking at it, I have put in a notice message in the
failure_route and it's not showing in the log which suggests it's not
triggering this route at all.
I don't think it is treating the 401 as a failure route.
Keith
On Tue, Oct 8, 2013 at 1:54 PM, wrote:
> Sen
s_canceled()) {
exit;
}
if(t_check_status("401")) {
uac_auth();
}
t_relay();
}
But it doesn't see to send the credentials back.
Any help would be appreciated.
Thanks.
Keith
___
SIP Express Router (SER
Hi,
I am looking to track calls so I can see which carrier they went over. I am
using the LCR module to distribute calls but the CDR module doesn't tell me
the final destination IP where the call was sent.
Any help or advice would be appreciated.
Thanks,
Also I would like to try and store these numbers in a the DB somehow to
minimise code.
Keith
On Thu, Oct 3, 2013 at 1:40 PM, wrote:
> Send sr-users mailing list submissions to
> sr-users@lists.sip-router.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
&g
table?
Thanks,
Keith
On Thu, Oct 3, 2013 at 1:40 PM, wrote:
> Send sr-users mailing list submissions to
> sr-users@lists.sip-router.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
Hi,
I am looking to restrict calls based on destination numbers, e.g. so people
can't call premium rate etc. Which module is best to achieve this?
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-
Hi,
I am looking to add some scripting to Kamailio so I can set my own
variables and configure from my own web page. Anyone point me in the right
direction?
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr
therefore FS drops
the call.
I have scoured every page and tried everything so any help would be
appreciated.
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org
Hi,
I am trying to use the carrierroute module, however the carrierroute.so
file is not in the module directory. I installed Kamailio version 4 from
yum.
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users
Hi,
At the moment I use kamailio to handle registrations. I have multiple
Asterisk servers behind this, is it possible to forward registrations on to
these servers? Is there a good way to do this?
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio
Hi,
Just a quick question, will the LCR module provide sufficient failover
capacity? I have used the dispatcher module and like the way it marks a peer as
down if it can't be contacted however I need to utilise the LCR functionality.
Maybe a combination of the both will be best?
Thanks,
rtain IPs and authenticate.
Thanks,
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
.
--
Keith
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
age rather than
based on the amount of traffic currently on each server (true load
balancing).
Thanks,
Keith
On Tue, Feb 26, 2013 at 8:41 AM, Alex Balashov wrote:
> There is no reason, other than the "soft" question of FreeSwitch's
> suitability to the SBC role, as the term
Thanks, any reason I could not just use FreeSwitch as an SBC and then load
calls between multiple Asterisk servers?
Thanks,
Keith
On Wed, Feb 20, 2013 at 7:12 PM, Andreas Granig wrote:
> Hi,
>
> On 02/20/2013 04:24 PM, Radek Wal wrote:
>
>> SEMS als SBC application.
>&g
Hi,
I am looking to build an SBC/SIP router made up from Kamailio and FreePBX.
Calls will then need to be passed to multiple Asterisk media gateways. Can
anyone point me to some documentation or help on how to do this?
--
Keith
___
SIP Express Router
63 matches
Mail list logo
