ed option".
Is this actually supported?
Thanks.
-Barry Flanagan
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
10.212.129.99:5060 advertise 107.22.60.14:5060
listen=udp:10.212.129.99:5060 advertise 107.22.60.14:5060
Hope this helps.
-Barry Flanagan
I dont know why i get 408 Request TIme out.
>
> Kindly support to solve the issue with TCP for sending IM.
> My application intends to register an
d/kamailio: 1: /etc/init.d/kamailio: sed: not found
> /etc/init.d/kamailio: 118: /etc/init.d/kamailio: arithmetic expression:
> expecting primary: ""
>
You appear not to have sed installed.
Run "sudo apt-get install sed"
-Barry Flanagan
>
> what could b
"Retransmitting #5 (no NAT) to 198.23.139.21:5060: "
...for whatever reason, Kamailio is not replying to these.
-Barry Flanagan
I have attached the log for two local calls that hangup after about 30s and
> the sequence for an incoming call from one of the trunks that works without
>
have tried various settings but can't see a way to make the From: header
contain the subscriber's CLI.
Is this still not possible without a custom tweak?
-Barry Flanagan
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailin
001 is registering to a different domain?
Kamailio would be looking in the location table for "username='1001' AND
domain='198.23.139.21'"
You should check the Kamailio logs for what is happening when Asterisk
sends it the INVITE for 1001@198.23.139.21
Hope this hel
On 29 May 2013 10:25, Michael Leuker wrote:
> Thank you very much for sharing your insights, Barry! I am facing the same
> problem that Trevor described:
>
> Things are working just fine on their own, but as soon as FreePBX comes
> into play, calling extensions becomes impossible because of the d
On 27 May 2013 03:36, zhengyw wrote:
> Hi:
> The question has been settled! Thank you very much Barry and Gertjan!
>
>
Glad to hear it.
For everyone's benefit could you please post what the actual issue was and
how it was solved?
Thanks
>
> best regard
> zhengyw
>
>
>
> --
> View this me
On 20 May 2013 09:35, Gertjan Wolzak wrote:
> Hello,
>
> I looked at the asterisk config, looks like you have not configured that.
>
> You need to add a dialplan in the extensions config and trunks in the sip
> confiig.
>
> If you want to make the dialplan realtime as well, you should add the
> d
On 20 May 2013 04:07, zhengyw wrote:
> Hi Barry:
>This issue have not been resolved after following by your method that
> modifed the video1_sipregs table struct,attachment is table info and
> asterisk log.
> Can you help me with this problem? thank you very much!
>
>
I can see that your sipr
On 16 May 2013 02:18, zhengyw wrote:
> thank you very much. but I don't know What is the cause of the problem*（"
> Unresolvable destination (478/SL)" *）?
>
> 1.I was very confused, don't know what to do. can you give more hints ？
>
>
Not really. You have not confirmed that you have done what I su
y much the
only part of the Asterisk database Kamailio needs
Having said that, if you make a change in FPBX but have not yet clicked on
the "Apply changes" (which writes out the .conf files) your database data
might be out of sync with Asterisk. Probably not a huge issue.
Hope thi
On 13 May 2013 09:46, zhengyw wrote:
> Hello:
>
> I have followed the steps in the guide(
> http://kb.asipto.com/asterisk:realtime:kamailio-3.3.x-asterisk-10.7.0-astdb
> ):
>
>
>
> 1. Could you find any mistake in my configuration file?
>
>
>
I don't see any obvious errors apart form the
On 13 May 2013 03:02, zhengyw wrote:
> hello daniel:
>thank you very much! but I can't find the problem in the asterisk.
>attachment is asterisk's configure file, kamailio's configure file and
> data.can you help with this problem?
>
>
Hi
Your video1_sipregs table does not seem correct.
my use case would not exceed 1,000 so having the
registers sent to all asterisk servers made sense. For a large scale system
I would keep registrations off Asterisk completely.
Regards,
-Barry Flanagan
> Anty
>
>
>
>
> --
>
> Message: 3
&g
sk
> route[TOASTERISK] {
>
> # If call comes in to the .75 iface, we need to send it to the .75 iface of
> Asterisk as well.
> # otherwise we send to the .76 iface. We do this by calling different
> dispatcher sets. This is
> # because Asterisk needs to use NAT on the
4;
xlog("SCRIPT: Call to 10.5.75. ip - using set $var(setid) \n");
} else {
$var(setid) = 2;
xlog("SCRIPT: Call from $fn to 10.5.76. ip - using set $var(setid) \n");
}
# round robin dispatching on set determined above
if(!ds_select_dst($var(setid), "4"))
{
On 1 Apr 2013 20:38, "Skyler" wrote:
>
> This is great news!
>
> I've been developing an auto-loading coffee/toaster/egg/sausage machine
this past year but did not have any 'perfect' solution to control the
appliance via dictation.
>
No bacon? Pass.
-Barry
__
On 30 March 2013 21:32, wrote:
> Hello,
> I followed the step by step guide (
> http://kb.asipto.com/asterisk:realtime:kamailio-3.3.x-asterisk-10.7.0-astdb)
> that describe the realtime integration between Kamailio and Asterisk. I
> have no problem with registration but when I try a cal
On 21 March 2013 20:12, Daniel W. Graham wrote:
> I still cannot get any log messages to appear in my log, this makes it
> very hard to troubleshoot issues. Does anyone have any idea what the issue
> could be?
>
> **
>
Perhaps change the ownership of kamailio.log to the syslog user?
Hope th
On 20 March 2013 03:05, David Thomson wrote:
> hi,
>
> I have two kamailio 3.3.4 servers sharing one database. usrloc module is
> loaded on both machines. The DNS name for the machines is shared (i.e
> siptest.testdomain.com with 2 public ip's - one for Server1 and one for
> Server2) and setup
On 7 March 2013 22:20, Paul Belanger wrote:
> Greeting,
>
> Hopefully, I'm understanding the following default kamailio.cfg[1]
> file. Over the weekend, I was attached by SipVicious. Following
> along with the example Daniel[2] create with kamailio and asterisk, I
> have almost the same setup.
load_module: could not
open module :
/usr/lib64/kamailio/modules/ims_registrar_pcscf.so: undefined symbol:
sem_post
Thanks
-Barry
> Kind regards,
> Carsten
>
> 2013/1/30 Barry Flanagan :
> > On 30 January 2013 11:25, Carsten Bock wrote:
> >>
> >> Hi Barry
qlite [db_sqlite.c:80]: SQlite terminate
Regards,
-Barry
Kind regards,
> Carsten
>
> 2013/1/29 Barry Flanagan :
> > On 29 January 2013 13:40, Barry Flanagan wrote:
> >>
> >> On Mon Jan 28 10:18:01 CET 2013, Daniel said:
> >>
> >> > Hello,
On 30 January 2013 11:25, Carsten Bock wrote:
> Hi Barry,
>
> i commited some fixes for the Rx-Interface.
> You will also need to update the config, since i added a few fixes
> there as well.
>
>
Thanks very much Carsten, I will give it a go and let you know!
-Barry Flanaga
On 29 January 2013 13:40, Barry Flanagan wrote:
> On Mon Jan 28 10:18:01 CET 2013, Daniel said:
>
> > Hello,
> >
> > do you still get the issues? The ims modules were not touched lately.
> > sem_post is from the core.
>
> > Cheers,
> > Daniel
>
&g
-Barry Flanagan
On Mon Jan 28 10:18:01 CET 2013, Daniel said:
> Hello,
>
> do you still get the issues? The ims modules were not touched lately.
> sem_post is from the core.
> Cheers,
> Daniel
Hi Daniel
Yes, still an issue as of the 29 Jan build. Using this on Ubu
On 23 January 2013 04:42, wrote:
>
> > Date: Tue, 22 Jan 2013 13:19:44 +
> > From: Barry Flanagan
> > Subject: [SR-Users] Problem with 4.0 nightlies and IMS - sem_post
> >
> >
> > I am trying to run the Ubuntu nightlies from
> > http://deb.kamai
: undefined symbol: sem_post
0(1980) ERROR: [sr_module.c:572]: ERROR: load_module: could not
open module :
/usr/lib64/kamailio/modules/ims_qos.so: undefined symbol: sem_post
Thanks
-Barry Flanagan
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr
29 matches
Mail list logo
