On Tue, Mar 28, 2017 at 12:52:32AM +0500, Jade SZ wrote:
> PS: Also thanks a lot for the great blog post on SIP server tuning.
You're very welcome. Glad it proved useful to someone!
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: htt
Hi Daniel,no, I haven't changed anything in kamcli.ini, it seems to be the same
like this one behind your link.I'm running both kamailio and kamcli as root.Any
other ideas for running of kamcli?
RegardsMarko
Last part of my kamcli.ini:
### jsonrpc settings
[jso
Hello,
I submitted the 1st version of my prototype:
https://github.com/kamailio/kamailio/pull/1045
I attach here 2 sample configurations to use with
Regards,
Guillaume Bour
On Thu, Mar 16, 2017 at 01:18:47PM +0100, Daniel-Constantin Mierla wrote:
> Hello,
>
>
> On 13/03/2017 22:45, Guillaume
Thanks Alex, that's a great hint. I'll check.
PS: Also thanks a lot for the great blog post on SIP server tuning.
On Tue, Mar 28, 2017 at 12:15 AM, Alex Balashov
wrote:
> You might be running into semi-invisible/not widely publicised (but
> definitely very real) PPS limits on given instance si
You might be running into semi-invisible/not widely publicised (but definitely
very real) PPS limits on given instance sizes.
On March 27, 2017 3:09:56 PM EDT, Jade SZ wrote:
>Hi Guys,
>
>I am running a simple REGISTER load test on:
>
>1) Kamailio sever with 2 cores - mem 5G
>2) Kamailio server
Hi Guys,
I am running a simple REGISTER load test on:
1) Kamailio sever with 2 cores - mem 5G
2) Kamailio server with 4 cores - mem 16G
Both are EC2 instances.
At -r = 500 i.e. 500 reg/sec sipP test works fine with very few re-trans.
But when i increase it to 800 reg/sec it starts retransmissio
Hello,
did it happen only once, or it can be reproduced?
Can you also get from gdb:
frame 6
p *name
p *port
Cheers,
Daniel
On 27/03/2017 16:43, David Escartín Almudévar wrote:
> hello Daniel
>
> here you have
>
> (gdb) frame 1
> #1 0x0045b472 in _dns_hash_find (name=0x7f6906943188,
Sorry, this is on a:
cat /etc/debian_version
8.4
ᐧ
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Mon, Mar 27, 2017 at 7:05 PM, David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> Hello guys,
>
> I have in my apt the nightly build repo, which i use
Hello guys,
I have in my apt the nightly build repo, which i use fairly regularly for
testing.
Today i tried installing kamailio 5 and got the following:
# apt-get install -y kamailio
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages
Hi,
I continue to investigate on this area.
I’m thinking that there are some security settings on the FS /var/, and I’m
looking for if we have the rights to change it (I work for a project and don’t
have all the ability to change some settings without agreement).
I’ll update you later tomorrow
hello Daniel
here you have
(gdb) frame 1
#1 0x0045b472 in _dns_hash_find (name=0x7f6906943188, type=1,
h=0x7fff120793cc, err=0x7fff120793ac) at dns_cache.c:535
535 *h=dns_hash_no(name->s, name->len, type);
(gdb) info locals
e = 0x7f69069015b8
tmp = 0x7f69069247e0
ret = 0x0
no
Hi Daniel,
Thanks for the response and link. My config is broadly similar.
Presence is working over SIP (e.g. I can SUBSCRIBE and revive NOTIFY messages
from the Kamailio Presence server)
and XCAP is working over HTTP (e.g I can GET, edit and PUT rls-service and
resource-list documents into the
Hi,
Great thanks to answer so quickly.
I tested the $vn ….in the 5.0.x script instead of $var…., and the results look
good.
So I have to review the entire script to change all the ‘$var…. == $null’
entries to ‘$vn…. == $null’. I assume I have to do the same for the ‘!= $null”
case. Am I corre
Hello,
$var(...) don't hold null values, they start initialed to 0 and they are
reset to 0 (when assigning $null to them) -- this is the design from the
beginning which brings benefits in many situation when one doesn't get a
chance to init.
If you want a similar variable that works with null, th
Hello,
as recently as last week, someone encountered an file access problem
while installing Siremis, which is using also some temporary files in
/var/, even it was granting provileges via chown and chmod. All went
fine after disabling selinux. It was on a centos.
I am not saying it is the same,
Hi,
I'm continue my job to 'migrate' my 3.3.1 kamailio.cfg script on a RHEL 6.2
server to the 5.0.x kamailio version on a RHEL 7.1 server, and I encounter a
major problem with the '== $null' test in the script.
My original script (3.3.1) contains this sequence :
$var(i:rangeInx)=0;
Hi,
This is the RHEL 7.1 distro, and there is use of selinux, apparmor or other
tools.
Are you meaning that the /var/run/ folder would be secured more than other
folders?
Cordialement
Patrick GINHOUX
De : sr-users [mailto:sr-users-boun...@lists.sip-router.org] De la part de
Daniel-Constantin
Hello,
On 25/03/2017 21:32, m9rt8ii wrote:
> Please can anybody give me basic steps how to set up cnxcc module on kamailio
> 4.4 ?
> I will be very very grateful.
> http://kamailio.org/docs/modules/4.4.x/modules/cnxcc.html
maybe the presentation from the author of the module at Kamailio World
Co
Hello,
have you changed the rpldir in any way for kamcli?
https://github.com/kamailio/kamcli/blob/master/kamcli/kamcli.ini#L43
Cheers,
Daniel
On 24/03/2017 00:10, Marko Tirs wrote:
> Hi Daniel,
>
> Kamailio is running as root.
> How to solve the socket problem?
>
> Regards
> Marko
>
>
> --
Hello,
On 23/03/2017 18:22, Shadowy Man wrote:
> This is only happening for one particular block of IP's. I can download
> from other blocks.
>
> I suspect it is being done on the download.opensuse.org end for some
> reason. It appears to be the entire xx.xx block of which I only use a
> few
Hello,
I haven't used snom with rls and xcap, however, my working configs with
xcap and based on the config snippet presented at:
- http://lists.sip-router.org/pipermail/sr-users/2013-October/079988.html
If you are not familiar with, be aware that XCAP should be over http(s).
Should you be st
Hello,
the backtrace is no longer matching the 4.4 branch code, as you run an
older release in that series.
Can you get with gdb from the core the output of the following commands:
frame 1
info locals
list
and send them here on the mailing list.
Cheers,
Daniel
On 24/03/2017 14:50, David Esc
Hello,
kamailio should attempt to create the /var/run/kamailio folder if the
application is run with enough privileges. However, some operating
systems add more constraints on top of the execution user.
What is your OS distro? Do you have selinux, apparmor or other similar
tools enabled?
Cheers,
Hello,
do you want to see the traffic from devices or want to use for
troubleshooting some app? If the second, then it might be easier to just
set the NULL encryption algorithm. Some tips and tricks to debug TLS
connections are collected at:
- https://www.kamailio.org/wiki/tutorials/tls/testing
24 matches
Mail list logo
