Hello Everyone,
I am trying just forward MESSAGE through kamailio and I reported issue with
mod_sms in freeswitch https://freeswitch.org/jira/browse/FS-9701. So I was need
add work around on kamailio side. The issue that my setup MSILO should work in
intercept mode meaning check when user onlin
Hello list,
We’re using dev version of Kamailio:
version: kamailio 5.0.0-dev4 (x86_64/linux) ff63e5
flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_F
Hi Slava,
if I understand correctly your scenario,
you could call t_on_failure before relaying the MESSAGE. In this way you
should have access to the original message in the failure route triggered
after receiving a final reply and you should be able to store it with the
regular msilo functions.
Ho
Hello Daniel,
I am not programmer, but I want place request if kaamilio devs can complete it
.
Thanks
Slava.
From: "Daniel-Constantin Mierla"
To: "sr-users"
Sent: Tuesday, 15 November, 2016 03:00:19
Subject: Re: [SR-Users] msilo
Hello,
for me it is fine to add a new parameter to
Please note:
"$rp" is not the same as "$Rp", PV's are case-sensitive
Thanks,
Carsten
2016-11-15 14:34 GMT+01:00 Daniel-Constantin Mierla :
> Hello,
>
> do you receive the packets over UDP on local port 6060 and $Rp is not 6060?
>
> Cheers,
> Daniel
>
>
> On 15/11/16 13:13, andrzej.ciupek-aste
Hello,
do you receive the packets over UDP on local port 6060 and $Rp is not 6060?
Cheers,
Daniel
On 15/11/16 13:13, andrzej.ciupek-asterisk.edu.pl wrote:
> Hello
>
> I have tried $Rp before sending this to mailing list, but with $Rp I
> have different values for example 188, 6847, 3163, 9175 f
Hello
I have tried $Rp before sending this to mailing list, but with $Rp I
have different values for example 188, 6847, 3163, 9175 for every call
?!
Don't know where are they come from, because in URI I see :6060, and
using $rp give my 6060 for examples with $Rp.
Only have problem with UAC P
Hello,
Please see debug output for when I try and send the SIP INFO when I am
initiating a new call.
I am just testing out the command currently, in practice I will look to inject
the SIP INFO into an already formed dialog, so is the way I am trying to test
cause me an issue?
I can see;
Hello Community,
We were facing a weird issue in one of our Kamailio servers where custom htable
entries were removed which did not belong to a particular call.
Background Information:
We use htable to store the call-id and a uuid when an INVITE message is
received and remove these entries when
Hello,
I looked quickly at the code and the mi command should take the values
from the parameters. Can you run with debug=3 and get all the logs
messages to see if we can spot something threre.
Cheers,
Daniel
On 15/11/16 11:27, Jonathan Hunter wrote:
>
> Hi,
>
>
> Sorry Daniel, let me be clea
Hi,
Sorry Daniel, let me be clear.
Correct the To/From are not taken from the rpc command, the INFO is
triggered/sent but with the To/From of the new request coming in;
Below I dial 07917190438 from ext 209 and this INFO is sent;
INFO sip:kamailio.org SIP/2.0
Via: SIP/2.0/UDP 8.8.8.8;bran
Hello,
what do you mean by "with default parameters" in your last remark? Are
the To/From not taken from the rpc command?
Cheers,
Daniel
On 15/11/16 11:06, Jonathan Hunter wrote:
>
> Hi Daniel,
>
>
> That works in terms of clearing the error, however I just see kamailio
> send a SIP info mess
Hi Daniel,
That works in terms of clearing the error, however I just see kamailio send a
SIP info message to kamailio.org, as apposed to the RURI I provide, I presume
again this will just be putting the t_uac_dlg parameters in the correct order?
Parameters:
* method - request method
*
Yes. I finish the session at the end of each call. Also I am using
rtpproxy_manage("r"). My configuration regarding RTPProxy is default config
which comes with Kamailio sample config file.
On Tue, Nov 15, 2016 at 11:44 AM, Dragos Oancea
wrote:
> Hi
>
> Increase fs.file-max in your /etc/sysctl.co
Hi,
how about checking $Rp
(http://www.kamailio.org/wiki/cookbooks/devel/pseudovariables#rp_-_received_port)?
That would show, on which port the packet was received
Thanks,
Carsten
2016-11-15 8:43 GMT+01:00 andrzej.ciupek-asterisk.edu.pl
:
> Hello
>
> My point is to log INVITEs in my Network
Hi
Increase fs.file-max in your /etc/sysctl.conf .
eg: fs.file-max = 5
And then do sysctl -p
Decrease SILENT_TIMEOUT in your rtpengine.conf (eg:SILENT_TIMEOUT=120) -
it's default 1 hour and if some calls don't have media then rtpengine
will just keep the UDP ports in use until this timeout exp
Hello
My point is to log INVITEs in my Network. My SIP Network work on port
6060.
Im am using HEP to do that, and hep clients that are listening on port
range 5060-6066 to detect some SIP attack to port 5060 and others.
But when I have attack to port 5060 I don't want to insert that INVITE
to
Hello,
a short reminder for those interested in submitting a talk proposal for
FOSDEM 2017 -- see the details in the initial email.
Cheers,
Daniel
On 24/10/16 11:09, FOSDEM RTC Team wrote:
> FOSDEM is one of the world's premier meetings of free software developers,
> with over five thousand peo
Do you have any failure route trying new destinations?
A sip trace (e.g., ngrep output with -t on port 5060) for such case will
help to see what happens.
Also, be sure you have no t_set_fr() that overwrites the value from
parameters.
Not related, but I noticed that the comment doesn't match the
Hello,
iirc, the dots where used in MI protocol to provide empty values for
parameters. Can you try in json with "" values instead of the dots, or
enclose the dots in double quotes so the json document is valid?
Cheers,
Daniel
On 14/11/16 21:04, Jonathan Hunter wrote:
> Hi Daniel,
>
> I am ju
Are you ending the rtp proxy sessions when the call are ended? What
rtpproxy functions are you using in the configuration file?
Cheers,
Daniel
On 14/11/16 18:18, Gholamreza Sabery wrote:
> No not the first time. But over time. I rebooted my system and error
> is gone! It seems that it happens ov
Hello,
for me it is fine to add a new parameter to m_store() that takes the
body content.
Are you asking for more details of how can be done?
Cheers,
Daniel
On 13/11/16 07:08, Slava Bendersky wrote:
> Hello Everyone,
> I asking question/request to add improvement for msilo module where
> will h
22 matches
Mail list logo
