Hello,
that's the way it was done for older versions of kamailio.
In master and 4.4 the memory debugging is turned on and it is reflected
by the presence of DBG_SR_MEMORY in the output of 'kamailio -v'.
Anyhow, what you reported is not a leak inside kamailio memory manager,
but a leak of using s
Hi Daniel,
I tried to compile with memory manager in debugging mode like this:
MEMDBG=1 make cfg 'include_modules= textopsx db_mysql jansson json
snmpstats tls utils uuid'
make all
/etc/init.d/kamailioa stop
make install
/etc/init.d/kamailioa start
But still I'm getting nothing on:
kamailio -I
Got an update on this from the firewall's perspective. Apparently the
Barracuda was in (SIP) Proxy mode. After turning that off and just using
plain NAT everything worked like expected.
Cheers,
Dirk
___
SIP Express Router (SER) and Kamailio (OpenSER) -
Hello,
there is a mode when the matching is done only on call-id. Have you
checked if they use different call-id?
Anyhow, knowing the matching mode helps looking into the code in the
right direction.
Cheers,
Daniel
On 07/10/16 12:03, Sebastian Damm wrote:
> Hi Daniel,
>
> thanks for the reply.
Hi Daniel,
thanks for the reply. Since we didn't configure the matching mode, it is 0
I guess. I actually didn't look into the usrlc module settings. But from
the registrations, the Contacts all have a different IP address in it, so
they shouldn't replace each other, right?
Best Regards,
Sebastia
Yes, over UDP only.
Regards,
Igor.
De : Daniel-Constantin Mierla [mailto:mico...@gmail.com]
Envoyé : vendredi 7 octobre 2016 09:25
À : Igor Potjevlesch ; 'Kamailio (SER) - Users
Mailing List'
Objet : Re: [SR-Users] Kamailio stop processing SIP
The load is not big.
Is the SIP tra
Hello,
I have problems with the behaviour of kamctl
ubuntu@ip-172-31-32-10:/etc/kamailio$ kamctl ul show
ERROR: Error opening Kamailio's FIFO /var/run/kamailio/kamailio_fifo
ERROR: Make sure you have the line 'modparam("mi_fifo", "fifo_name",
"/var/run/kamailio/kamailio_fifo")' in your config
ERRO
hello Daniel
thanks for the response
we are using 4.4.1.
i will try to use async_route instead
i found making some tests that the error seems to happen when there is
some delay in the connection with the FSW and we have a timeout, so it
seems there is some relation with that timeout (with lua co
Hi Daniel,
By pasting the following to the registrar config file, I stopped
getting Bad Extension error. And I am able to stay online. But while
dialing, it gives the "I am terribly sorry..." error.
modparam("path", "use_received", 1)
modparam("registrar", "use_path", 1)
modparam("registrar", "pa
Hi Daniel,
I am pasting a fresh REGISTER request and the error message here. The
Proxy and Registrar config files are taken from
http://kamailio.org/docs/modules/4.2.x/modules/outbound.html
-
root@infinicalls:~# ngrep -d any -qt -W byline . port 5060
interface: any
filter: (ip or ip6)
This was also my understanding. But as you can understand I want to be
certain. Currently this issue only rises with the Cisco hardware in
combination with the Barracuda firewall. Other appliances seem to
respect the order properly.
On 07-10-16 09:30, Daniel-Constantin Mierla wrote:
> I think the
Hello,
There are some results when searching for memory leak on openssl 1.0.1,
but might not be valid for this case.
Would you be able to run kamailio through valgrind? It may slow down a
bit the processing, but may be the fastest way to catch the system
memory leak. Maybe you have an instance wi
I think the Route set as presented in the first email is correct. The
Client is also having a proxy, so the caller device has to use the Route
set from bottom up, sending first to its proxy, which should send to
Kamailio's public IP. If the caller device is sending directly to
kamailio, then there
Hi Daniel,
openssl.x86_64
1.0.1e-48.el6_8.1
CentOS release 6.8
With kind regards,
Jurijs
On Fri, Oct 7, 2016 at 10:20 AM, Daniel-Constantin Mierla wrote:
> Hello,
>
> the tls module in kamailio is using shm memory, but can be something
> internal for libssl. What operating system do you use a
The load is not big.
Is the SIP traffic over UDP?
Cheers,
Daniel
On 06/10/16 18:16, Igor Potjevlesch wrote:
>
> I'm using snmpstats and dialog.
>
> IPTables is used but not with SIP tracking module.
>
>
>
> But if I work on a Wireshark trace during a representative peak period
> (during ~12min
Hello,
On 06/10/16 19:30, Brian McCrary wrote:
> Hello,
>
> No, I did not have the pv module loaded! I loaded that module and all
> is well. I didn't know I needed it. I ran into a few other small
> errors that I was able to easily fix so I now have a good config file
> and am ready to star
Hello,
the tls module in kamailio is using shm memory, but can be something
internal for libssl. What operating system do you use and what is the
libssl version?
Cheers,
Daniel
On 06/10/16 17:43, Jurijs Ivolga wrote:
> Hi Daniel,
>
> I do not use puke.top rpc command. Maybe this issue related t
17 matches
Mail list logo
