Hello,
when tls module is installed, a self signed pair of certificate-private
key is generated in /usr/local/etc/kamailio
If you need one that is signed by a trusted CA (e.g., Verisign), you
will have to buy it.
Cheers,
Daniel
On 3/19/13 8:08 AM, Khoa Pham wrote:
Hi,
I want to enable TL
Hello Moacir,
Yes, my Kamailio server is on virtual machine & its connected direct to the
internet.
Regards,
Amr
From: sr-users-boun...@lists.sip-router.org
[mailto:sr-users-boun...@lists.sip-router.org] On Behalf Of Moacir Ferreira
Sent: Tuesday, March 19, 2013 10:00 PM
To: Kamailio
Thanks for the idea.
After sending the original email I got user2 to call through to user1. Zrtp
even was negotiated. So I think usrloc is sort of sharing the registration
information but sometimes the call doesn't get sent through under certain
circumstances.
Maybe it's because user1 is beh
I dont think it works like that, obviously the server 1 does not have a
connection if the user is registered on server 2.
On 3/19/13 11:05 PM, David Thomson wrote:
hi,
I have two kamailio 3.3.4 servers sharing one database. usrloc module
is loaded on both machines. The DNS name for the mach
hi,
I have two kamailio 3.3.4 servers sharing one database. usrloc module is
loaded on both machines. The DNS name for the machines is shared (i.e
siptest.testdomain.com with 2 public ip's - one for Server1 and one for
Server2) and setup in round robin mode.
The scenario is as follows:User
Hello,
forgot to reply to this one -- I did the changes of mailing lists short
descriptions, updating to reflect better the situation after 4.0 and be
coherent for both lists.
I assume I break your filters, right? Maybe is better to use filters
based on X-Been-There or Sender, because they c
NATed solutions with no RTP proxies will depend on the client side, not on the
server side like in Kamailio. Key things to notice: 1 - Private IPs (RFC-1918)
will always be proxied if you don't change the basic template config;2 - Dual
NIC servers require a little bit more knowleadge on Kamailio
Hi,
I had this "issue" some times ago. It turned out that I needed to increase
the value of SHM_MEMORY, since by mistake I forgot a 0 on the value (1024
vs. 10240). However this happened only when high loads on system.
I needed also to tune PKG_MEMORY to my needs. ( both on
/etc/default/kamailio )
Thanks All,
Yes, please if you've an example using nathelper without rtp proxy let us know.
now more than ten days I am trying to get kamailio up & running to bypass NAT &
firewall blocking but I couldn't.
After some research I might create a VPN.
so please if you have any working example for
okay the problem here has to do with your config file:
your config should rather look something like this:
route[register]
{
if (!t_newtran()) {#absorb retransmissions
sl_reply("500","Could not create transaction");
exit;
}
if (!ims_www_
hi ,
i use kamailio 3.3.4 version
I set and load dialog module
modparam("dialog", "ka_timer", 10)
modparam("dialog", "ka_interval", 20)
use dlg_set_property("ka-src");
When uac A call uac B connection success , After 20 seconds, sip proxy
send the OPTIONS message uac A
Crazy sent to f
Daniel
Do you have a config example using nathelper without rtp proxy?
Regards
Julián
-Mensaje original-
De: sr-users-boun...@lists.sip-router.org
[mailto:sr-users-boun...@lists.sip-router.org] En nombre de
Daniel-Constantin Mierla
Enviado el: martes, 19 de marzo de 2013 10:00 a.m.
Par
Hello,
rtpproxy could bring some delays, as another hop in rtp path. But
usually is not noticeable, unless rtpproxy is on a slow network.
Look at the traffic coming to rtpproxy and going out (with wireshark or
similar tool) to be sure you have delays from rtpproxy.
Cheers,
Daniel
On 3/19/1
Hello,
it will require a bit of investigation. I expected the issue from the
fact that kamailio is setting own memory manager to be able to share
content before processes. Probably the lua ssl lib does some operation
before things get properly set up.
Send me also the output of:
bt full
If
Hello Anca,
On 03/19/2013 06:00 AM, Anca Vamanu wrote:
If you create dialog before and use the implementation that relies on
dialog variables [1], it is safe to call uac_replace_from() multiple
times on the same message, or even the same initial message but looped.
The module will detect that u
Hi Alex,
If you create dialog before and use the implementation that relies on
dialog variables [1], it is safe to call uac_replace_from() multiple
times on the same message, or even the same initial message but looped.
The module will detect that uac_replace_from() was called multiple times
Daniel,
Thanks for the help. YES after disabling TLS for Kamailio, it is working
fine.
Is there a solution to have both TLS for Kamailio and SSL for LUA?
Thanks
Krish Kura
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-
Hello,
I am facing NAT & Firewall problems how I can solve this issue I've tried
RTPProxy but voice quality is bad.
any tutorial, please
Amr
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users maili
Hi,
I want to enable TLS in Kamailio, as in here
http://kamailio.org/docs/modules/stable/modules/tls.html
But how can I get the certificate and private key ?
--
Khoa Pham
HCMC University of Science
Faculty of Information Technology
___
SIP Express Rou
19 matches
Mail list logo
