My whole configuration is:
[Sip clients] < = > Kamailio 3.2 <=> Asterisk servers (behind Kamailio)
Asterisk servers have only local IP addresses, and I use t_relay instead of
forward.
Kamailio runs on same server as rtpproxy.
Now I played lot of combinations and I have next results:
1. Clients are
Hi Daniel,
yes we are running 3.1.5, but we have back ported the whole pua module
from the master branch that included also the patches in your link. In
fact, the second patch use the patches from the link you have
mentioned to solve the same problem. Because the patches themselves
from the link
Hi,
kamailio 1.5.0 has slow to treat requests after some time running with
devices over TLS. About the state of the connection, I noticed that the
gateway doesn't has keepalive to tcp connection, so, after two minutes idle
this connection is released by timeout and other are create in future
requ
Hello,
On 12/28/11 2:41 PM, Bruno Bresciani wrote:
Hi all,
Someone know if the kamailio 1.5.0 has problem to create and release
tcp connetctions after some time running? In my SIP network I have six
IP telephones and one gateway registered over TLS, after some time
(one day) this devices hav
Hello Laura,
I applied most of the patches, apart the second one for hash.c, related
to checking for temporary dialog. I need to look a bit more at it, since
there was some work in this regard:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=b93149c756d3e983c70608938f1
On 12/29/11 3:42 PM, Andrew Pogrebennyk wrote:
On 12/29/2011 03:36 PM, Robert R wrote:
Thank a lot. $T_reply_code works.
I tried all variables in pv doc ($rc, $err.rcode, $rs ... ) and none of
them works,
Actually the $rs pseudo-variable should also work as described here:
http://sip-router.o
On 12/29/2011 03:36 PM, Robert R wrote:
> Thank a lot. $T_reply_code works.
> I tried all variables in pv doc ($rc, $err.rcode, $rs ... ) and none of
> them works,
Actually the $rs pseudo-variable should also work as described here:
http://sip-router.org/wiki/cookbooks/pseudo-variables/devel#sip_r
Thank a lot. $T_reply_code works.
I tried all variables in pv doc ($rc, $err.rcode, $rs ... ) and none of
them works,
On Thu, Dec 29, 2011 at 9:27 AM, Andrew Pogrebennyk <
apogreben...@sipwise.com> wrote:
> On 12/29/2011 03:21 PM, Robert R wrote:
> > What is the Pseudo-variables for "Status-Lin
Robert R writes:
> What is the Pseudo-variables for "Status-Line" filed of SIP response
> messages (2xx, 3xx,4xx,5xx,6xx)? i.e., is there a Pseudo-variables to
> display the SIP response code?
search pv doc using keyword 'sip reply'.
-- juha
___
SIP E
On 12/29/2011 03:21 PM, Robert R wrote:
> What is the Pseudo-variables for "Status-Line" filed of SIP response
> messages (2xx, 3xx,4xx,5xx,6xx)? i.e., is there a Pseudo-variables to
> display the SIP response code?
You can test it with tm function t_check_status(...) or get it in a
config variabl
Hi,
What is the Pseudo-variables for "Status-Line" filed of SIP response
messages (2xx, 3xx,4xx,5xx,6xx)? i.e., is there a Pseudo-variables to
display the SIP response code?
Thanks,
R
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users maili
Hello,
it proved that the msg parameter for event_route execution due to
keepalives was not set to the faked structure. The event route was
executed but many functions don't do anything as the sip message was
missing.
Try with latest git branch 3.2, I just pushed the fix for it.
Cheers,
Dan
No, I do not see anything related in messages nor in syslog. Otherwise
dispatcher is working fine, but that event-route is still not triggered and
I really need the information about failure...
The output of kamctl fifo ds_list is ok, one gw is marked as IP and another
one as AP. When I flush the
13 matches
Mail list logo
