Maybe, if I understand you correctly, the 'advertised_address' and/or
'advertised_port' settings are the thing for you?
--
This message was painstakingly thumbed out on my mobile, so apologies for
brevity, errors, and general sloppiness.
Alex Balashov - Principal
Evariste Systems LLC
260 Peacht
On Fri, Dec 16, 2011 at 12:26 PM, Alex Balashov
wrote:
> On 12/15/2011 06:25 PM, Ben WIlliams wrote:
>
>> Hi,
>> My Kamailio server listens on multiple IPs - say IP1, IP2. If a
>> request arrives on one IP, Kamailio uses the same IP as the source
>> address when forwarding, which is good. But is t
On 12/15/2011 06:25 PM, Ben WIlliams wrote:
Hi,
My Kamailio server listens on multiple IPs - say IP1, IP2. If a
request arrives on one IP, Kamailio uses the same IP as the source
address when forwarding, which is good. But is there any way a UA
could generate a request to IP1 that gets forwarded
Hi,
My Kamailio server listens on multiple IPs - say IP1, IP2. If a
request arrives on one IP, Kamailio uses the same IP as the source
address when forwarding, which is good. But is there any way a UA
could generate a request to IP1 that gets forwarded by Kamailio with
source address IP2 ? The reas
On 12/15/2011 06:33 PM, Andreas Granig wrote:
So, to sum it up:
If you want to use IPv6, use $fs instead of force_send_socket() (or
maybe multihoming, haven't tried that yet), and set dns_try_ipv6=yes.
Andreas
Hello,
I have attached an improved version (uses inet_pton instead of manually
pa
So, to sum it up:
If you want to use IPv6, use $fs instead of force_send_socket() (or
maybe multihoming, haven't tried that yet), and set dns_try_ipv6=yes.
Andreas
signature.asc
Description: OpenPGP digital signature
___
SIP Express Router (SER) and
Hi,
Alright, dns_try_ipv6=yes did the trick.
Thanks,
Andreas
On 12/15/2011 11:55 AM, Andreas Granig wrote:
> Hi,
>
> Here is the full sip trace of the hop proxy->lb (SDP snipped), this
> should help getting an idea what's going on. What the lb does it taking
> the value from P-R-Uri and tries t
On 12/15/2011 04:41 PM, Daniel-Constantin Mierla wrote:
Hello,
On 12/15/11 1:18 PM, marius zbihlei wrote:
On 12/14/2011 07:28 PM, Andreas Granig wrote:
Hey Dani
Hello,
Actually, looking at the code I've observed some weird behavior : for
example to fix the force_send_socket IPv6 address, a
Only this worked:
sercmd -s unixs:/tmp/kamailio_ctl system.listMethods
core.arg
core.echo
core.flags
core.info
core.kill
core.printi
core.prints
core.ps
core.psx
core.pwd
core.sctp_info
core.sctp_options
core.shmmem
core.tcp_info
core.tcp_options
core.udp4_raw_info
core.uptime
core.version
ctl.co
Do I have to load some specific module ?
ERROR: connect_unix_sock: connect(/tmp/sercmd_ctl): No such file or
directory [2]
On Thu, Dec 15, 2011 at 3:55 PM, Daniel-Constantin Mierla wrote:
>
>
> On 12/15/11 3:45 PM, Mino Haluz wrote:
>
> kamctl dispatcher dump
>
> did the thing.
>
> that is usi
On 12/15/11 3:45 PM, Mino Haluz wrote:
kamctl dispatcher dump
did the thing.
that is using fifo file and MI command.
sercmd is doing the RPC command. Can you give the output of:
sercmd system.listMethods
Cheers,
Daniel
kamailio 3.2.0.
On Thu, Dec 15, 2011 at 3:38 PM, Daniel-Constantin
kamctl dispatcher dump
did the thing. kamailio 3.2.0.
On Thu, Dec 15, 2011 at 3:38 PM, Daniel-Constantin Mierla wrote:
> Hello,
>
>
> On 12/15/11 2:50 PM, Timo Klecker wrote:
>
> Hi Mino
>
> ** **
>
> Try
>
> Sercmd dispatcher list
>
> ** **
>
> Without the dot. This works with
Hello,
On 12/15/11 1:18 PM, marius zbihlei wrote:
On 12/14/2011 07:28 PM, Andreas Granig wrote:
Hey Daniel,
On 12/14/2011 06:00 PM, Daniel-Constantin Mierla wrote:
is the ipv6 address in between square brackets (can you give exact
usage
of the foce_send_socket())? It should work as the bridg
Hello,
On 12/15/11 2:50 PM, Timo Klecker wrote:
Hi Mino
Try
Sercmd dispatcher list
Without the dot. This works with kamctl, haven't used sercmd.
in sercmd should be dispatcher.list with dot, but the command is
available starting with v3.2.0. What is your kamailio version?
Cheers,
Daniel
Hi Mino
Try
Sercmd dispatcher list
Without the dot. This works with kamctl, haven't used sercmd.
Greetings
Timo
Von: sr-users-boun...@lists.sip-router.org
[mailto:sr-users-boun...@lists.sip-router.org] Im Auftrag von Mino Haluz
Gesendet: Donnerstag, 15. Dezember 2011 14:31
An: S
Hi,
# sercmd dispatcher.list
error: 500 - command dispatcher.list not found
The module is loaded, dispatcher.list file exists. Am I doing something
wrong ? Thanks.
Mino.
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-use
Andreas Granig writes:
> Just realized that lcr module does not support IPv6 yet. Is there
> already any work going on here? Otherwise we'd take this task over.
i don't know of such work. if you decide to do it, try to not cause any
performance hit for current ipv4 usage.
-- juha
_
On 12/14/2011 07:28 PM, Andreas Granig wrote:
Hey Daniel,
On 12/14/2011 06:00 PM, Daniel-Constantin Mierla wrote:
is the ipv6 address in between square brackets (can you give exact usage
of the foce_send_socket())? It should work as the bridging ipv4-ipv6 is
using the same mechanism -- may be a
Hi,
I would like to use the dispatcher module with algorithm 10 - call load
balancing. But there are multiple things that are a bit unclear to me. I
have multiple gateways that can serve different maximum number of calls.
1) Can I somehow set the maximum calls count for each dispatcher gateway,
s
Hi,
Here is the full sip trace of the hop proxy->lb (SDP snipped), this
should help getting an idea what's going on. What the lb does it taking
the value from P-R-Uri and tries to send it to that destination (no $du
will get set on the lb):
U 2011/12/15 11:45:34.357000 127.0.0.1:5080 -> 127.0.0.1
Hello,
On 12/15/11 11:26 AM, Andreas Granig wrote:
On 12/15/2011 11:10 AM, Andreas Granig wrote:
On 12/15/2011 10:19 AM, Daniel-Constantin Mierla wrote:
ERROR: tm [ut.h:295]: ERROR: uri2dst: failed to resolve "[x::x]"
:unresolvable A or request (-7)
Is there something I haven't consider
On 12/15/2011 11:10 AM, Andreas Granig wrote:
> On 12/15/2011 10:19 AM, Daniel-Constantin Mierla wrote:
>>> ERROR: tm [ut.h:295]: ERROR: uri2dst: failed to resolve "[x::x]"
>>> :unresolvable A or request (-7)
>>>
>>> Is there something I haven't considered yet? Why would it try a DNS
>>> loo
Hi Daniel,
On 12/15/2011 10:19 AM, Daniel-Constantin Mierla wrote:
>> ERROR: tm [ut.h:295]: ERROR: uri2dst: failed to resolve "[x::x]"
>> :unresolvable A or request (-7)
>>
>> Is there something I haven't considered yet? Why would it try a DNS
>> lookup for this R-URI?
> is it failing over al
All,
Just realized that lcr module does not support IPv6 yet. Is there
already any work going on here? Otherwise we'd take this task over.
Andreas
signature.asc
Description: OpenPGP digital signature
___
SIP Express Router (SER) and Kamailio (OpenSER
Hello,
On 12/14/11 11:52 AM, Arif Tuhin wrote:
I want to enable the rtp repacketization feature of the rtpproxy. I
have set force_rtp_proxy("z150"). But the repacketization is not
happening. in the log it does show that rtp will be repacketizes but
when i see the wireshark capture, its the sam
Hello,
On 12/15/11 1:32 AM, Gnaneshwar Gatla wrote:
Hello,
I have come across this behavior in Kamailio 3.1.5 version.
The proxy is behind a Firewall and uses the advertised IP to
communicate to sipclients.
I have used the "dlg_match_mode", as the record_route_preset() does
not include t
Hello,
On 12/14/11 7:12 PM, Andreas Granig wrote:
Hey,
One more thing related to outbound routing. Maybe this question is
stupid, but I still have to learn a lot regarding IPv6 :)
So my Jitsi registered fine, the contact in location table looks like this:
contact:
sip:testuser1@[x::x]:5060;tr
Hello,
On 12/14/11 6:28 PM, Andreas Granig wrote:
Hey Daniel,
On 12/14/2011 06:00 PM, Daniel-Constantin Mierla wrote:
is the ipv6 address in between square brackets (can you give exact usage
of the foce_send_socket())? It should work as the bridging ipv4-ipv6 is
using the same mechanism -- may
Hi,
As per my practical experience the same file works for 3.2.z as I was using
for 3.1.x, nothing changed in configuration file except the part where
rtpproxy functions are called.
Regards,
Sammy.
On Thu, Dec 15, 2011 at 9:12 AM, Anthony Sanchez wrote:
> Is there an update of default Kamailio
Is there an update of default Kamailio 3.2.1 configuration file to
integrate with Asterisk?
Thanks in advance,
Tony
___
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org
http://lists.sip-router.org/cgi-b
30 matches
Mail list logo
