Hello,
can you send the log messages with debug=3 and ngrep of the SIP traffic
on all interfaces (including loopback) for such case (from the initial
subscribe, ideally sent for a resource list with one or two entries so
that there are not so many requests flowing around)? It will help to
und
Hi Juha,
My configuration is trying to achieve exactly what you suggest.
The Kamailio presence and RLS modules send NOTIFYs using the route-set
established by the SUBSCRIBE. This means that if I call
add_contact_alias() and just pass the SUBSCRIBE to the module the NOTIFY
will use that contact a
peter,
i don't have experience with k rls module, but in my environment if
initial subscribe comes from behind nat, i just call add_contact_alias
and add a nat param to r-r header for in-dialog requests. notifys from
rls server then contain ;alias param in request uri and the nat param in
route h
Hello,
I am using Kamailio and nathelper to connect UAs behind a NAT. However,
I want to use presence and RLS in this system as well. The problem I
have is that the presence and RLS modules are not nathelper aware and
the NOTIFY requests that they generate are targeted at the private
network IP
Hi Daniel
On 03/25/2011 03:07 AM, Daniel-Constantin Mierla wrote:
Hello,
the dbg_breakpoint(...) is not yet enabled internally, iirc. I left it
this way since I thought there are some potential issues which need a
bit more analysis, for now you have to use the global parameter to
enable the b
Hi Daniel:
On 03/25/2011 03:03 AM, Daniel-Constantin Mierla wrote:
thanks for troubleshooting. Indeed this was an issue, I did a commit
to fix it last evening. During the times when SER and Kamailio were
developped separately, SER added extra avp lists, in Kamailio was
still one, corresponding
Am 25.03.2011 14:39, schrieb Henning Westerholt:
> On Thursday 24 March 2011, Alexandre Abreu wrote:
>> Hi Daniel,
>>
>> Using 'xmlrpc' and 'mi' it works. When I finish this project, I will write
>> a small text explaining the steps I did to make this work. Maybe this will
>> benefit more people
Am 25.03.2011 13:30, schrieb Spinov Evgeniy:
> Question is execution of script will continue just after this call with
> reparsed packet or will run the script again? Debug shows that will
> continue from that point, but I'm unsure that I'm working with reparsed
> packet.
AFAIK it continues. Just
On Thursday 24 March 2011, Alexandre Abreu wrote:
> Hi Daniel,
>
> Using 'xmlrpc' and 'mi' it works. When I finish this project, I will write
> a small text explaining the steps I did to make this work. Maybe this will
> benefit more people from the community.
Hi Alexandre,
good that it works no
Kamailio 3.1.2
I am using Kamailio in front of Freeswitch as simple sip router. To do
multi-tenant in Freeswitch I created SIP domain (fs2000.ly.net) and used as sip
domain inside my sip phone. This domain does not map to any real IP and no
entry in our DNS server. If I sent the call directly to
On Thu, 2011-03-24 at 14:14 +0100, Daniel-Constantin Mierla wrote:
> Are you calling msg apply changes after record_route()? Try to do
> record_route() after since it tries to discover the outgoing local
> interface which might not be set at that point.
This has fixed the problem.
Also I'm wond
Hello,
the dbg_breakpoint(...) is not yet enabled internally, iirc. I left it
this way since I thought there are some potential issues which need a
bit more analysis, for now you have to use the global parameter to
enable the breakpoint. Since you reminded it, I will try to find time
for it a
Hi Min,
On 3/24/11 3:47 PM, Min Wang wrote:
Hi Daniel
Again. Thanks a lot.
On 03/24/2011 09:26 AM, Daniel-Constantin Mierla wrote:
t_set_fr() accepts any pseudo-varaibles as parameters, how did you
use it?
You are correct! I messed with time unit in the avp. I should
times 1000 for
13 matches
Mail list logo
