Thanks to all for your help.
Eliezer, certainly that can use my graph.
I could confirm that my problem is in rules mark connection and mark packet
that i use to stop the big downloads across the port 80. But this it is my
problem. Even I have it pending.
On Thu, Jul 20, 2017 at 5:13 PM, joseph
On 22/07/17 02:18, erdosain9 wrote:
Hi, and thanks
The ROUTERWIFI is a TpLink TL-WR940N i dont see in this router any Nat
option :-(
Ah. Home router. These devices usually have things vastly simplified so
they don't get screwed up by non-technical users. If you have been using
what the
Hey,
Let's split the scenario into two different issues.
- interception
- routing
Since the squidbox is a router you need to first enable it to be a router and
also to do NAT for DNS and other services to work.
Means that the MASQUARADE rule is fine but you should limit it only to the
specific
On 22/07/17 02:18, erdosain9 wrote:
Hi, and thanks
The ROUTERWIFI is a TpLink TL-WR940N i dont see in this router any Nat
option :-(
This is the router table of the SquidBox
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse
Iface
0.0.0.0
Hi, and thanks
The ROUTERWIFI is a TpLink TL-WR940N i dont see in this router any Nat
option :-(
This is the router table of the SquidBox
Kernel IP routing table
Destination Gateway Genmask Flags Metric RefUse
Iface
0.0.0.0 10.1.158.1 0.0.0.0 UG
On 21/07/17 07:07, erdosain9 wrote:
Hi, and thank you all.
Well this is the diagram.
INTERNET
+
+
FIREWALL (10.1.158.1/24)
+
+
+
SQUID (2 interfaces) 10.1.158.2/24
192.168.1.20/24
This machine called SQUID need to be configured as a router.
You mentioned th
Hey,
What you describe is possible... and is recommended for many scenarios.
You just need to take into account that what you would want is to make sure
your have a static route from the squid machine to the WIFI network via the
WIFI Router.
Also you should use NAT(source nat \ masquerade) on th
