On 07/18/16 08:00 PM, Ian Collins wrote:
Hello,
I have a couple of systems with Supermicro X9 boards (X9SRH and X9DRH)
with dual embedded Intel X540 10GBase-T NICs and both only show the link
speed as 1000 for ixgbe0. I don't see this with a SmartOS system with
an X540 PCI card, or on a Solaris
I setup a log mirror on my system along with a mirrored cache. I was
setting up a NUT server to gracefully shutdown the system and had one of my
lines wrong and the system was abruptly powered off. Since there was no I/O
activity zones is fine. I was able to remove the failed mirrored cache but
the
One update.
I tried to execute two create zpool commands continuously.
I found the first one is always failed, and the second one would be successful.
# zpool create nzp1 mirror c2t600144F0C691A30D57BE942F0002d0
c2t600144F0C691A30D57BE942F0001d0; zpool create nzp1 mirror
c2t600144F0C6
Hi all,
I met a problem when I tried to create zpool on iscsi target.
I tried to create a zpool on two iscsi targets.
After I created and discovered the iscsi target
600144F0C691A30D57BE942F0002, I type format immediately to see as blow .
# format
AVAILABLE DISK SELECTIONS:
0. c1t0d0
