Thanks Denial for detailed Description
Regards
Navin
On Sun, May 3, 2020, 13:35 Daniel Letai wrote:
>
> On 29/04/2020 12:00:13, navin srivastava wrote:
>
> Thanks Daniel.
>
> All jobs went into run state so unable to provide the details but
> definitely will reach out later if we see similar i
On 29/04/2020 12:00:13, navin
srivastava wrote:
Thanks Daniel.
All jobs went into run state so unable to provide the
details but definitely will reach out later if we see similar
issue.
i am
Navin,
Check out 'sprio', this will give show you how the job priority changes
with the weight changes you are making.
-b
On 4/29/20 5:00 AM, navin srivastava wrote:
Thanks Daniel.
All jobs went into run state so unable to provide the details but
definitely will reach out later if we see simi
Thanks Daniel.
All jobs went into run state so unable to provide the details but
definitely will reach out later if we see similar issue.
i am more interested to understand the FIFO with Fair Tree.it will be good
if anybody provide some insight on this combination and also if we will
enable the b
Are you sure there are enough resources available? The node is in
mixed state, so it's configured for both partitions - it's
possible that earlier lower priority jobs are already running thus
blocking the later jobs, especially since it's fifo.
It would re
Thanks Brian,
As suggested i gone through document and what i understood that the fair
tree leads to the Fairshare mechanism and based on that the job should be
scheduling.
so it mean job scheduling will be based on FIFO but priority will be
decided on the Fairshare. i am not sure if both confli
If you haven't looked at the man page for slurm.conf, it will answer
most if not all your questions.
https://slurm.schedmd.com/slurm.conf.html but I would depend on the the
manual version that was distributed with the version you have installed
as options do change.
There is a ton of informa
Thanks Brian.
I need to check the jobs order.
Is there any way to define the default timeline of the job if user not
specifying time limit.
Also what does the meaning of fairtree in priorities in slurm.Conf file.
The set of nodes are different in partitions.FIFO does not care for any
part
Without seeing the jobs in your queue, I would expect the next job in
FIFO order to be too large to fit in the current idle resources.
Configure it to use the backfill scheduler: SchedulerType=sched/backfill
SchedulerType
Identifies the type of scheduler to be used. Note t
In addition to the above when i see the sprio of both the jobs it says :-
for normal queue jobs all jobs showing the same priority
JOBID PARTITION PRIORITY FAIRSHARE
1291352 normal 15789 15789
for GPUsmall all jobs showing the same priority.
JOBID PARTITION PRIORIT
Hi Team,
we are facing some issue in our environment. The resources are free but job
is going into the QUEUE state but not running.
i have attached the slurm.conf file here.
scenario:-
There are job only in the 2 partitions:
344 jobs are in PD state in normal partition and the node belongs fro
11 matches
Mail list logo
