CS>question regarding CS production

Hi Guys, I am very new to the list and I am sorry if am asking something that may have been answered many times before (I couldn't find a FAQ .. or a sticky post...). It was from reading the excellent posts from this silver-list that I have decided to make my own CS.. I used to buy my CS, how

Re: CS>question regarding CS production

0.2 mA in a quart of H2O for 24 hours, no stirring needed. > > Steve Y. > > > > From: Asif Nathekar [mailto:asifnathe...@hotmail.com] > Sent: Monday, June 06, 2011 12:28 PM > To: silver-list@eskimo.com > Subject: CS>question regarding CS production > > &

Re: CS>question regarding CS production

It takes about 2-3 hours to go to from 28 to 6v after which it starts making "sludge" I am thinking of buying my own distiller so that I can control the process better. I have been brewing only 1 liter batches. I found a 300g coffee jar ideal. Plus it was a glass jar. I cannot increase the wid

Re: CS>question regarding CS production

I have tried to find a resister calculator for the lm134/lm334. But haven't succeeded. Would you kindly point me in the right direction. Ideally I would like to choose anything upto 3ma for scalability. Sent from my iPhone On 7 Jun 2011, at 00:18, Asif Nathekar wrote: > Is 1.5ma

Re: CS>question regarding CS production

ltage vs Distance apart are sort of inverse proportion. current is proportional to particle size, sort of. Have fun, OK, Tony PS Archives: http://www.mail-archive.com/silver-list@eskimo.com They are not appearing at the bottom of your emails? Wonder why? Tony On 7 Jun 2011 at 0:18, Asif Natheka

Re: CS>question regarding CS production

the meter says. What did you wash the bottle out > with? Any soap remaining at all can ruin the whole process. > > Marshall > > On 6/6/2011 2:27 PM, Asif Nathekar wrote: >> >> Hi Guys, >> >> I am very new to the list and I am sorry if am asking somethin

Re: CS>question regarding CS production

e outside edge of the terminals. You end up with > electrodes that are spaced 4 cm in the water. > > Tom > > > -Original Message- > From: Asif Nathekar [mailto:asifnathe...@hotmail.com] > Sent: Monday, June 06, 2011 4:32 PM > To: silver-list@eskimo.com > Su

CS>home made CS generater

Hi, i made a post three weeks ago, to which many kind people helped regarding building my CS generator. it was built using a LM317T chip to control current at 1.5ma to three anodes and three cathodes, total area squared of anodes is 3 inches (thin silver wires). And Voltage at 30v initially.

Re: CS>Desulfurizing

Hi Mike, Just to clarify you mentioned that to clean the silver electrodes, use the voltage from the generator and the aluminium strip should be the anode or positive and the silver should be on the cathode or negative. If I have understood this won't that release the aluminium from the strip?

Re: CS>Soldering vs crimping

Will connector blocks do?... I used that in my first prototype to suspend the silver electrodes into the DW. Will need to separate them (as they come in blocks), and ensure that connector block elements (plastic and metal) doesn't touch the DW for fear of contamination and also the metals from

Re: CS>The importance of low current

Hi, The current should be ok For even a medium sized wire but the brew time will be slow depending on the quantity required. I think a water pump is overkill. To be honest at such a low current and slow brew I do not think you even need much agitation at all if any! The Bruce stenulson design had

Re: CS>The importance of low current

Also if you're going to brew a half gallon with a silver wire at .28ma. You will require a lot of patience!. More than you may have thought you may have. With peace Regards Asif. On 29 Sep 2011, at 00:57, "ragrem...@netzero.net" wrote: > This my first post and I am gonna be building my generat

Re: CS>The importance of low current

a quart-sized batch, what would I have to change on > the pulsed version at low current? > > Ray > > > > -- Original Message -- > From: Asif Nathekar > To: "silver-list@eskimo.com" > Subject: Re: CS>The importance of low current >

Re: CS>which electrode gets? dark

Anode = Positive = is where the silver ions are 'donated' to the water Cathode = Negative = where the electrode becomes dark due to the 'sludge' - IF NOT POLARITY SWITCHING, THE CATHODE CAN BE STAINLESS STEEL, If polarity switching OR if you have a unit that COULD be switched to polarity switc

Re: CS>smart meter

I did watch a whole presentation on this by an electrical engineer, I have a similar background and appreciated the detail. Basically this is what I learnt. 1 : Smart Meter operate on a frequency similar to microwaves 2 : Smart meters work on a Cluster / Cloud architecture, meaning one meter doe

Re: CS>smart meter shielding

From what I understand, the network is a high fault tolerance interconnected "star" topology network. The antenna is omnidirectional because of this. It has a high poll rate plus it's event activated traffic. E.g. If someone goes to the toilet at night and uses the light. Or when high current dr

Re: CS>Urgent...where to get silver in India

I have a lot of family in India and cannot source any myself, for their requirements. For my next trip to India I will be taking a simple battery powered generator, taking my own silver and ordering in water for injections, as distilled isn't available, unless self distilled. maybe a silver

Re: CS>smart meter shielding

that would be a decent compromise, as the meter would buffer the traffic and send when the next available opportunity presents itself which of course would be when you uncover the shielding perhaps the neighborhood could agree on a time to do this... e.g. 9pm-10pm every night bea

Re: CS>Urgent...where to get silver in India

. for home distillation you would need to have it on for a good few hours at a time...if your local circuit can handle the electrical requirements of a steam distiller, and you can have electricity for that long!... -- From: "Asif Nathekar&q

Re: CS>Urgent...where to get silver in India

I cant find ANY distilled water where I folks live... even water for injections will be available on a special order There must obviously be some Distilled water available somewhere in India, but not where my folks are, so I cannot comment on the quality or otherwise of any available...

Re: CS>Urgent...where to get silver in India

Solar panels will heat water effectively in india, as for generating electricity, I do not think it will be enough by itself unless supplemented by decent battery backup and inverter combination. Even then I do not believe such a system will be able to sustain that much current draw. As my unc

Re: CS>Urgent...where to get silver in India

> > -----Original Message- > From: Asif Nathekar [mailto:asifnathe...@hotmail.com] > Sent: Wednesday, October 19, 2011 3:19 PM > To: silver-list@eskimo.com > Subject: Re: CS>Urgent...where to get silver in India > > Solar panels will heat water effectively in india, a

Re: CS>Urgent...where to get silver in India

: RE: CS>Urgent...where to get silver in India All you really need is a pressure cooker, some tubing and a receiving receptacle from what I have read. PT -Original Message- From: Asif Nathekar [mailto:asifnathe...@hotmail.com] Sent: Wednesday, October 19, 2011 4:41 PM To: silver-list@eski

Re: CS>smart meter shielding

LOL On Wed, Oct 19, 2011 at 10:46 AM, Asif Nathekar wrote: that would be a decent compromise, as the meter would buffer the traffic and send when the next available opportunity presents itself which of course would be when you uncover the shielding perhaps the neighborhood could agree

Re: CS>Colloidal silver analyzed at Penn State U.

Hi , Try the link I sent previously On 20 Oct 2011, at 17:30, Marshall wrote: > I get no such website when I click on that link. > > Marshall > > On 10/20/2011 8:16 AM, Alchemysa wrote: >> This might be the closest examination ever of the physical structure of >> colloidal silver. Then ag

Re: CS>Electromedicine

Hi What about a pc based audio signal generator. They are usually free I also have two on my iPhone. I use a 12v car stereo speaker amp with a aux jack input and one of the speaker outputs for the two electrodes. Speaker volume acts as "strength" I used this setup to try some Zapper and rife freq

Re: CS>Smart Meter

I have this EMF app on my iphone http://www.appstorehq.com/emfdetector-iphone-52737/app and also http://www.mbtheme.com/WebApp/Tools-Utilities/201011/EMF-Meter_65840-65840.html it seems to work okand it uses all 3 axis ... it may not have the response and granularity and frequency range l

Re: CS>Collodial silver for eyedisorders?

Hi Kim, A friend recently had an eye infection that resulted in a case of 'pink eye', I asked him to try colloidal silver, dropped in the eye generously. He did that before bed time, and in the morning it had cleared. It was most likely an eye infection and not the result of lack of sleep, or

RE: CS>collodial silver for parkinsons. Please help. I need your advice/ suggestions

Dear savita, Please read the posts regarding virgin coconut oil / or vco. Its effectiveness has been corroborated by many sources, please read more about medium chain tryglycerides. It would be a direction of study I would point you in without much hesitation. With peace, Asif. -Original Mes

CS>PPM vs uS

Hi, I have been doing some more reading which has got me looking for a resolution, namely what uS do you consider to roughly figure out the PPM. I know the reason why a typical ppm or uS meter would not give a reading due to the ions which we do want to measure not being very measurable in terms

Re: CS>PPM vs uS

I was reading that some people were considering uS as ppm for CS Which had me think was my 15us brew a 7/8 ppm or 15. The variance is large and given the discussions of high ppm recently it got me even more interested. On 12 Jan 2012, at 10:12, Neville Munn wrote: > Several variations to uS/P

Re: CS>PPM vs uS

I wasn't thinking about the ppm to uS ratio which is calibrated on my meter with some type of sodium solution. Rather I am interested in uS or ppm in CS . So if my meter says 15uS in my CS what should I *think* it is? I know there's is no perfect answer here given that we cannot measure the ionic

Re: CS>PPM vs uS

I asked the question and didn't realise that I kicked the hornets nest! All I wanted to know is what ppm I was producing given a particular uS reading! But I have learnt a lot! Since I am using a very low current per area and my electrodes are very large and far apart, with current control I am p

Re: CS>PPM vs uS

owledge here. What sort of current control are you using. I use a simple fet circuit for the 1mA setting and it seems to work very well. I'm not sure that will reliably turn down to .25mA with a rod 1^2" area. Must try it soon. Regards, Tony Moody On 20 Jan 2012 at 16:14, Asif Nathe

CS>Boils and infections

Hi group, A friend has recurrent large and painful boils / infections under his skin which usually spreads but is temporarily treated with a course of three antibiotics. He did try my cs with some but not much success and went back for antibiotics. This time he got them I upped the dose of cs to

Re: CS>Boils and infections

earch.asp?q=boils&action=Search > Smitty > > On Fri, Feb 3, 2012 at 11:52 AM, asif nathekar > wrote: > Hi group, > > A friend has recurrent large and painful boils / infections under his skin > which usually spreads but is temporarily treated with a course of thre

Re: CS>Boils and infections

6:40:33 pm > To: "silver-list@eskimo.com" > From: "asif nathekar" > Subject: Re: CS>Boils and infections > > He has seriously cut sugar and sugary products, nearly all snack foods > completely. Nearly all dairy, eats mutton or chicken once a week and fis

Re: CS>Boils and infections

Re: CS>Boils and infections > > From: devorah...@yahoo.com > > To: silver-list@eskimo.com > > CC: > > > > Does her have mercury filling's in his mouth? > > -Original Message- > > Date: Friday, February 03, 2012 6:40:33 pm > > To: &quo

CS>Beck zapper

Hi group, Has anyone got any anecdotes for the beck zapper to share As I want to use one on my mate with the boils if it's potentially effective Thanks Sent from my iPhone -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlis

Re: CS>Beck zapper

ooks Bradley. Harborne Research Foundation. On Sat, Feb 4, 2012 at 4:53 PM, asif nathekar wrote: Hi group, Has anyone got any anecdotes for the beck zapper to share As I want to use one on my mate with the boils if it's potentially effective Thanks Sent from my iPhone -- The Silver Li

Re: CS>Boils and infections

MSO and apply topically. Worked on my son who had a > fistula. dee > > > On 3 Feb 2012, at 21:52, asif nathekar wrote: > > > Hi group, > > > > A friend has recurrent large and painful boils / infections under his skin > > which usually spreads but is t

Re: CS>Beck zapper

use some other protocols as well, >> such as colloidal silver orally, and transdermally as a pack mixed >> with some DMSO. >> >> Dan >> >> On Sat, Feb 4, 2012 at 5:17 PM, Asif Nathekar >> wrote: >>> I have built one from dr becks reference desi

Re: CS>Beck zapper

of extended rest, or anything like that. So, it >>> definitely works on some things. I would not hesitate to use it on >>> someone with boils, but I might also use some other protocols as well, >>> such as colloidal silver orally, and transdermally as a pack mixed >&

Re: CS>Beck zapper

t; purposes, the next day he was over it and didn't have any relapse or >>> need any period of extended rest, or anything like that. So, it >>> definitely works on some things. I would not hesitate to use it on >>> someone with boils, but I might also use some other

Re: Re: CS>Hulda clark zapper

For those who asked : For the Hulda clark design of zapper, I used the design of the very good Mr Bruce K. Stenulson "Build Your Own Zapper / Pulsed DC CS Generator" http://www.stenulson.net/althealth/cspulse.htm although i would remove the LED from the output as it would sink too much power fo

CS>nebuliser

Hi again!, Can anyone recommend a good nebuliser, under £100 pounds that I can buy here in the Uk? We have bought 3 from china via EBAY and arrive faulty or soon become defective... False economy!... thanks

Re: CS>Beck zapper

use some other protocols as well, such as colloidal silver orally, and transdermally as a pack mixed with some DMSO. Dan On Sat, Feb 4, 2012 at 5:17 PM, Asif Nathekar wrote: I have built one from dr becks reference design that swings from positive 27v to negative 27v square wave at around 4 hz, alth

Re: CS>nebuliser

ok thanks -- From: "Dorothy Fitzpatrick" Sent: Tuesday, February 07, 2012 5:39 PM To: Subject: Re: CS>nebuliser yes I have a Medisana which I got from Amazon. dee On 7 Feb 2012, at 17:09, Asif Nathekar wrote: Hi again!

Re: CS>Beck zapper

7;t fancy modifying it to make it behave. I may actually use it as an audio amp instead ! Sent from my iPhone On 7 Feb 2012, at 19:52, "PTFerrance" wrote: > My fault, www.frex.com.au > Sorry. > PT > > -Original Message- > From: Asif Nathekar [mailto:as

Re: CS>Beck zapper

bruary 07, 2012 6:35 PM > To: silver-list@eskimo.com > Subject: RE: CS>Beck zapper > > It is my understanding that audio amps are inappropriate to do the job... but > I'm no expert. Bil Green would be better equipped to answer your questions. > PT > > -O

CS>130V CS Generator

For those who asked. http://silvercentral.org/systems/130vdc.htm Sent from my iPhone -- The Silver List is a moderated forum for discussing Colloidal Silver. Rules and Instructions: http://www.silverlist.org Unsubscribe: Archives

Re: CS>Interview on One Radio Network

Hi Andre, Here are some points : 1 ) Your brewing vessel should be very clean, and your silver should also be very clean, meaning no oils from fingers e.t.c. 2) Use a very very good distilled water, preferably double distilled, I distill my own and single distill never ever works well. I hav

Re: CS>Interview on One Radio Network

My friend has a sg6 unit and he does get some small bits at the bottom of the brewing vessel. I would expect nearly all polarity switching unit to produce some silver fluff as when the polarity switches the build up on the electrodes would be flung off . And would collect at the bottom. I wouldn

Re: CS>Interview on One Radio Network

lled water was as good it can be since I bought it from >>> drugstore and I hade cleaned the vessel before use. However, I had to >>> bent the wires since the vessel was to shallow and they were more >>> than 1,5 inch apart at the end Perhaps that could be an explanation

Re: CS>Interview on One Radio Network

nse. >>> >>> My distilled water was as good it can be since I bought it from >>> drugstore and I hade cleaned the vessel before use. However, I had to >>> bent the wires since the vessel was to shallow and they were more >>> than 1,5 inch apart at the e

Re: CS>Source of Silver Strips

HI Can anyone recommend a supplier in the UK for a decent silver flat sheet for brewing something between 2 to 5 inches wide? I did try my local jeweller / smelter but he contaminated it with i assume is lubricating fluid, (i provided some Canadian maples for this purpose), no amount of keepi

Re: CS>Source of Silver Strips

He did say that lubricant was involved but it's designed to " burn off " with the heat since the metal is heated to soften it He was adamant that there should not be any residue , but clearly results show otherwise I even suspected that the silver may have been swapped out but I trust this perso

Re: CS>Source of Silver Strips

Ok will give it a go Will this not react with the silver ? Sent from my iPhone On 1 Mar 2012, at 15:30, "Marshall" wrote: > Go to the auto parts store and get a bottle of degreaser. That will take the > oils off very well. Keep off hands or it will really dry them out. > > Marshall > > On 3/

Re: CS>Source of Silver Strips

The reason for suspecting lubricant is that I dont expect anything other than silver to be present. Since we know lubrication was involved that's the reasoning. As for the brewing, I get almost wax type stuff coming off the wire and makes the water opaque and dirty I am aware of the ion cloud bu

Re: CS>Source of Silver Strips

ave two kinds, a > water based and a hydrocarbon based. Whichever you use, make sure you rinse > it well. > > Marshall > > On 3/1/2012 10:32 AM, asif nathekar wrote: >> >> Ok will give it a go >> Will this not react with the silver ? >> Sent from m

Re: CS>Source of Silver Strips

By solvent can I use propyl alcohol or clutch/ brake cleaner? Sent from my iPhone On 1 Mar 2012, at 20:55, "Dan Nave" wrote: > I would degrease with a solvent if possible, rub with paper towels. Rinse > with water. Clean with rubbing alcohol and a clean white paper towel. Rinse > with disti

Re: CS>Source of Silver Strips

ich is also water soluble, making it ideal. That one also contains > propanol alcohol, and light naptha, which is lighter fluid. All of these > should evaporate completely if pure. > > Marshall > > On 3/1/2012 5:29 PM, asif nathekar wrote: >> >> By solvent can I u

Re: CS>First Batch of CS

I would decant into the final vessel and stop just before the sludge starts pouring out. I do not believe the floaters at the top should be a problem Also make sure you wipe and clean your electrodes even mid cycle so that the sludge is at a minimum If you're excessively creating sludge then you

Re: CS>First Batch of CS

There are various treatments for warts which have been discussed previously including electrical based devices. Worth a look through the archives On 10 Mar 2012, at 17:26, CT wrote: > Thanks for the response Asif, > > I did, indeed, wipe the negative electrode silver clean mid-cycle. I thi

Re: CS>Tel - What PPM is your CS?

Agreed , I distill the water twice In the first distill I allow the water to boil for at least ten minutes with the Condensing unit unattached so that Anything that has a boiling point less than the tap water would have hopefully reduced significantly by then. I found this helped a lot. On

Re: CS>tooth problems- can EIS help? Double A Battery /Ode

Only the positive electrode will yield or precipitate its metal so if it's bare copper then you will get the copper mixture and the other metals that are mixed in that copper mixture Bear in mind that copper doesn't yield so easily in this manner, it may be that some of the more unwanted stuff

Re: CS>Re: CS Macular Degeneration

HI, While I agree with this in principle, I would say build or buy the frex unit as it will provide the waveforns as intended, computer soundcards will greatly distort square waves and also their power output is only appropriate as a signal source, it will need amplification correctly, please d

CS>Arthritis

Hi silver list, I wonder if you you guys have any good treatments for arthritis in the joints. Knees and fingers especially. The person has been taking around 10ml of 15ppm silver once a day and reports its helps. The person is being put on increased painkillers for this condition which has its

Re: CS>Arthritis

Dear all, Thank you so much for your suggestions. I will advise the individual involved and report the outcome to add to the anecdotal database! Peace to all Asif. On 30 May 2012, at 21:32, "Marshall" wrote: > CMO only stops the damage being done by the autoimmune attack. It does > nothing t

Re: CS>promising late lyme cure

Hi, I found this on : http://www.eytonsearth.org/forum/about7.html “ The original post on the formula for Argyria Cured: About two months ago, I was contacted by an individual with an amazing story: This individual utilized 32 ounces of silver chloride daily for 2.5 years and cured a very lat

Re: CS>Re: silver-digest Digest V2012 #292

Hi Ian, Those of us who have already been through what you are going through in terms of choosing which CS is the best will tell you the same, brew some at home with care and attention. The whole setup if done very simple with 3 nine volt batteries and a resister will cost you the same as one s

Re: CS>CS/Gatorade

Hi guys Is there anything to this in terms of real world performance vs regular eis? On 7 Aug 2012, at 17:22, Marshall wrote: > I believe a mixture of salt and citric acid will work as well. The salt > increases the solubility of silver chloride by forming a complex with it, and > the citr

Re: CS>Test

I got the message just fine On 11 Sep 2012, at 16:50, Dan Nave wrote: > Is the list still up? > > > -- > The Silver List is a moderated forum for discussing Colloidal Silver. > Rules and Instructions: http://www.silverlist.org > > Unsubscribe: >

Re: CS> Maple Leaf coins

May I offer that those who use metal clips to connect to the coins are NOT immersed in the water at all! Since you will have released some of the more undesirable stuff from the clips such as nickel which is poisonous in very small quantities! This is unfortunately easy to do with coins since th

Re: CS>high PPM EIS concept:

Reverse Osmosis Membrane or something analogous to that perhaps? From: David AuBuchon Sent: Friday, October 26, 2012 4:01 AM To: silver-list@eskimo.com Subject: CS>high PPM EIS concept: I hope I am not violating some basic law(s) of electrochemistry here...I'll give myself a 50% chance of some

Re: CS>high PPM EIS concept:

I use a current controlled CS generator, by increasing the 'distance' between the electrodes by means of a maze type container would THEORETICALLY help me by increasing the resistance of the DW so that i can keep the voltages higher where it tends to brew more efficiently, without reaching a low

Re: CS>stye in the eye

Hi Taniform,Would you kindly share studies, links, documents or equations to bring some weight to this opinion.You have some of us intrigued!Thank youBest regardsAsif.From: "Taniform Asongwe" To: "silver-list@eskimo.com" Sent: 28 October 2012 17:33Subject: Re: CS>stye in the eyeDMSO and CS results

Re: CS>microelectricitygermkiller group

Re: CS>microelectricitygermkiller groupOil of Oregano From: Trem Sent: Monday, October 29, 2012 3:29 PM To: silver-list@eskimo.com Subject: RE: CS>microelectricitygermkiller group Excuse my ignorance. What is O of O? Trem From: Marshall [mailto:mdud...@king-cart.com] Sent: Monda

Re: CS>The Silvercell process?

It's not difficult to make more than adequate highly ionic CS, by brewing using a very low current around 0.1 ma per sq inch. Extremely pure water and good clean apparatus. However I believe Mike is after the holy grail of perfection which in unnecessary for certainly even the most ambitious us

Re: CS>The Silvercell process?

Hi Neville, I have actually tried this and found nothing I can report anecdotally, however I found that if your silver source is around 99.8 and above, which I find American eagle coins usually are (as tested by XRF machine) then other factors play a much more significant role, such as water, p

Re: CS>Storing water

The issues are that the CS would combine with the various other chemicals in the water such as salts and form compounds that may not be as effective as one may believe. Also remember tap water has chlorine so it's not totally without protection. Although it may also have germs/ parasite in ther

Re: CS>Storing water

that include reverse osmosis water? > Thanks, Debbie > > From: Asif Nathekar > To: "silver-list@eskimo.com" > Sent: Monday, November 5, 2012 11:24 AM > Subject: Re: CS>Storing water > > The issues are that the CS would combine with the various other chemi

Re: CS>anxiety and stress

Hi Alan, I know some people, whom I would call sceptics about anything natural, that benefitted immensely from Bach flower remedies “rescue remedy” Try a couple of drops when extra tense. Be thankful to the Creator for what you have rather than what you haven't. Sometimes you have to adjust t

RE: CS>OT - zappers

Hi, I have circuit schematics for hulda clark and beck type zappers Those who are interested can contact me Peace to all, Asif. -Original Message- From: bob Larson [mailto:bobli...@att.net] Sent: 25 December 2012 06:24 To: silver-list@eskimo.com Subject: RE: CS>OT - zappers "zapper"

Re: CS>Conductive Gloves

hi please be aware that they are usually different but similar both are conductive but anti static has a high resistance usually with an added resistor as its used to ground high voltages. From: PT Ferrance Sent: Monday, December 31, 2012 2:45 PM To: silver-list@eskimo.com Subject: Re: CS>

Re: CS>Want a zapper-- Please check out

Hi I have an interest in zappers and wanted to know anyone else who benefitted from zappers especially the beck style designs or those using frex type designs... I built them but not sure about application and use On 9 Feb 2013, at 17:28, zzekel...@aol.com wrote: > the Electricgermkiller s

Re: CS>comparing the zapper with B.E.

Hi, Jambo Reid! hulda clarks zapper provides a +4v to +9v (dc offset) square wave at around roughly 25khz Becks B.E provides a –27v to +27v at 3.78/4 hz square waves both have very different ideas on the philosophy of their designs and why they work. Regards. From: A. Reid Harvey Se

Re: CS>Tooth infection

godzilla is a DC low current 6v unregulated blood electrifier is 30v ac square waves at usually 4hz but can vary both have differing philosophies and both have high praises godzilla is the easiest to implement From: André Juthe Sent: Wednesday, March 13, 2013 6:51 PM To: silver-list@eskimo

Re: CS>new member intro

Hi Joe, Please also look at the silver cell process. Many here have found that the simplest way is the best and if you use a current limiting diode or current limiting ic costing around a dollar then all you need is a 30 v or thereabouts supply and to keep the current to a maximum of 1ma per sq

Re: CS>new member intro

o the trick! Let us know how you get on > > Joe > > On 21/03/2013 12:26 PM, asif nathekar wrote: >> Hi Joe, >> Please also look at the silver cell process. >> >> Many here have found that the simplest way is the best and if you use a >> current limiting

Re: CS>new member intro

and I know distilled water in a plastic jug is not pure as it leaches > the plastic. I could double distill my water as I have 4 used distiller > sitting around my basement doing nothing. However, I will start with Reverse > Osmosis water put into a distiller, and that will be identical.

Re: CS>new member intro

Correct although some resin type filters are tweaked to remove some fluoride But for the best results it's RO or distillation in terms of cost and speed RO wins every time for drinking purposes. On 24 Mar 2013, at 14:45, "sol" wrote: > finplan65 wrote: >> Can someone please recommend a showe

Re: CS>Looking for silver wire on ebay

Agreed, I think the general wisdom for two silver electrodes is that someone may one day inadvertently swap their clips and harm themselves with the resultant brew. although I use a stainless steel cathode for an electrode myself, I wouldn't recommend it for other people, or even present it as a

Re: CS>Arthritus

Agreed Magnesium Oil is considerably cheaper to make and quicker to affect you. However remember to wash off the areas where applied as it also contains some sea salt. I would wash off anytime between half to one hour afterwards. Absorption happens around 20 minutes. Peace to All. Asif. Fr

Re: CS>RE: silver-digest Digest V2013 #232

Hi Chaps, My thoughts have been that anything that will vapourise at temps lower than the boiling point of water will also rise, cool and condense thereby polluting the end product. My solution to this is to let the water boil for a good 15 mins first to allow the contaminants to release int

Re: CS>ELECTRODOS DE PLATA

Please ensure the clips do not touch the water... only the silver best of luck Peace to all. From: yousouf eydatoula Sent: Saturday, August 31, 2013 8:05 AM To: silver-list@eskimo.com Subject: Re: CS>ELECTRODOS DE PLATA I'll tell you what I use. I just bought 2 silver (1 ounce) bullion co

Re: CS>help with diode

Im sure it was 1ma per square INCH I actually use 0.2/0.1 ma per square inch for much better and easier results It takes longer but its worth it... High likelihood of having Higher Ionic content. From: yousouf eydatoula Sent: Sunday, September 01, 2013 3:39 AM To: silver-list@eskimo.com

Re: CS>help with diode

I need to search for a diode that goes to 5 volts? > > There are only 2 current limiting diodes at 1mA, and the Max. Limiting > Voltage is only 1.7 V. > http://ca.mouser.com/Semiconductors/Discrete-Semiconductors/Diodes-Rectifiers/Current-Regulator-Diodes/_/N-ax1ml?P=1yzrlz3Z1z0rzzo >

RE: CS>safety of crystal

Hi all, My general advice is that you use borosilicate glass for brewing that way you can significantly minimise the effects of anything leeching into the water and other interactions that may occur. Peace to all. Asif. --- Original Message --- From: "Jess" Sent: 18 September 2013 16:33 To:

Re: CS>New pulse generator design

Hulda Clark / Don Croft type designs below this is the same type of circuit with the same functional output http://www.stenulson.net/althealth/cspulse.htm Ive made this and found that my brew was getting "gold" coloured It made the brew pretty fast and I wasn't happy with it. After experiment

  1   2   >