[sane-devel] gain/offset tables

Gday, > > Anyone's scanner do something similar? Got code or math I can steal? > The FB330P/FB630P behave the same way, and probably have the same CCD sensor. If you can understand Simon's code, then feel free to use it. The adjust_output() method in canon_pp-dev.c is probably most useful for

[sane-devel] gain/offset tables

nathan rutman wrote: > >But so far, it just looks like everyone (FBx30P, Microtek, Primax) does a >post-scan software-based linear correction. Does anyone know what other >scanners use the LM9830? Anyone else use these specific features? > The HP4200 is another LM9830 based scanner --> htt

[sane-devel] Umax unable to access parallel port

Dear All, Its me again, the umax problem... But I finally got the patch command going, =). But now the problem is I can't seem to get my scanner started, it gives me an error like EPP is not working like it should or something, I will try to get a better description of this problem, just wa

[sane-devel] gain/offset tables

The HP 6200 has some "internal scan area", too. But this is probably common technique. Another question is whether the gain and offset tables are readable or even writeable for the user. Some modern scanners like the Canon FS2710 film scanner seem to keep the gain control private and let all fine t

[sane-devel] Mustek USB 1200 UB?

I have a Mustek USB scanner (1200 USB Plus). The old 12000 SP went south recently - blown lamp. So we bought a cheapo Mustek 1200 USB Plus. In the list of supported hardware I see only a 1200 UB Plus and this is marked as unsupported. Odd. But I still hope that the UB Plus is something different

[sane-devel] microtec MRS600-E3 Vobis-clone problems

hi there, I have an old VOBIS HIGHSCREEN REALSCAN (3-Pass) which seems to be a Microtek-Clone (the label on the bottom says a 'MRS600E3') which is attached to an AHA152x-SCSI-Controller. In earlier versions of sane (I guess until 1.0) the scanner worked without problems (microtek-device). But now

[sane-devel] sane-find-scanners - scanning for USB gives error messages

RH 7.1, sane-1.0.6: Scanner is a Mustek 1200 USB Plus # sane-find-scanner >l [sanei_debug] Setting debug level of sanei_usb to 1. [sanei_usb] sanei_usb_open: open failed: No such file or directory [sanei_usb] sanei_usb_open: open failed: No such device [sanei_usb] sanei_usb_open: open failed:

[sane-devel] upgraded through 1.0.5 -> 1.0.6 and still 1.0.3 around?

I'm trying to get a Mustek 1200 USB working. For this purpose I upgraded from RH Linux 6.1 to 7.1 and sane from 1.0.5 to 1.0.6. When looking at the output of scanimage -L it seems that 1.0.3 is still around somewhere or am I wrong? # scanimage -L [sanei_debug] Setting debug level of mustek to

[sane-devel] Mustek 1200 USB Plus - RH Linux 7.1

I got a little bit further with getting the Mustek 1200 USB Plus to work. (still hoping it is really supported). # lsmod Module Size Used by ide-cd 26848 0 (autoclean) cdrom 27232 0 (autoclean) [ide-cd] scanner 6240 0 sg

[sane-devel] upgraded through 1.0.5 -> 1.0.6 and still 1.0.3 around?

Christoph, it's very likely that your Linux distribution installed a version of Sane in /usr/... , and when you compiled and installed the new version of Sane it was installed in /usr/local/... Depending on how your system is set up (ldconfig or LD_LIBRARY_PATH) the frontends first find the libr

[sane-devel] upgraded through 1.0.5 -> 1.0.6 and still 1.0.3 around?

On Tue, Nov 06, 2001 at 12:15:41PM -, Karl Heinz Kremer wrote: > Christoph, > > it's very likely that your Linux distribution installed a > version of Sane in /usr/... , and when you compiled and > installed the new version of Sane it was installed in /usr/local/... Thanks. That was the cas

[sane-devel] HP 7400c

Ondrejov, 6.11.2001 Hi all I would like to ask, whether there is any progress with the hp7400c (with Avision chipset) to be supported by sane. The last trace I found is an email from Luc Lalonde, who describes that he's able to see the scan

[sane-devel] HP 7400c

On Tuesday 06 November 2001 12:45, ma...@sirrah.troja.mff.cuni.cz wrote: > Ondrejov, 6.11.2001 > Hi all > > I would like to ask, whether there is any progress with the hp7400c (with > Avision chipset) to be supported by sane. > I mailed a similar question yesterday regarding the Minolta Scan Dual

[sane-devel] Minolta Scan Dual II (status report)

According to Jose Paulo Moitinho de Almeida : > Using the hpusbscsi driver by Oliver Neukum I managed to use this film > scanner under linux using kernel 2.4.13 and vuescan 2.1. :-) > > It worked out of the box, the only problem being some gray cross lines ;-) > > For all that need imediate lin

[sane-devel] Minolta Scan Dual II (status report)

On Tuesday 06 November 2001 14:24, you wrote: >. > >From what I could find here, it appear that, according to the Linux USB > > scanner page that > the Minolta Scan Dual II use an Avision chipset and that the Avision > backend may be one pa

[sane-devel] HP C7110A

--=_164866535==_ Content-Type: text/plain; charset="us-ascii"; format=flowed Hi there. I have an HP C7110C, one of the HP Scanjet 7400 family. Is there anyone with news on making this work on SANE? Thanks! --=_164866535==_ Content-Type: text/x-vcard; chars

[sane-devel] Minolta Scan Dual II (status report)

According to Jose Paulo Moitinho de Almeida : > As we now have a driver to access the scanner I think that it is time to go > for a sane backend. In the past few weeks I contacted David R., who got > some specs from Minolta (for other scanners?) back in 1999. He confirmed that > he is no longer

[sane-devel] microtec MRS600-E3 Vobis-clone problems

Hi, On Tue, Nov 06, 2001 at 11:38:51AM +0100, der engel frank wrote: > I set the SANE_DEBUG_MICROTEK to 128 and rerun the frontend > (xscanimage). as you see in the last lines, there comes a 'SENSE' > message. what does this mean? The sense handler of the backend was called. This may be because o

[sane-devel] Mustek USB 1200 UB?

Hi, On Tue, Nov 06, 2001 at 11:37:16AM +0100, Christoph Kukulies wrote: > I have a Mustek USB scanner (1200 USB Plus). > The old 12000 SP went south recently - blown lamp. > > So we bought a cheapo Mustek 1200 USB Plus. > > In the list of supported hardware I see only a 1200 UB Plus and this > i

[sane-devel] sane-find-scanners - scanning for USB gives error messages

Hi, On Tue, Nov 06, 2001 at 12:15:26PM +0100, Christoph Kukulies wrote: > RH 7.1, sane-1.0.6: > > Scanner is a Mustek 1200 USB Plus > > # sane-find-scanner >l > [sanei_debug] Setting debug level of sanei_usb to 1. This should only happen if you did "export SANE_DEBUG_SANEI_USB=1" befor calli

[sane-devel] Trust 19200 USB mustek: I don't have /dev/usb/scanner

Hi, I downloaded the sane backend and the mustek_usb part, build and installed it, but it doens't work since I'dont't have a /dev/usb/scanner* What shoud I do? Here is some more info that might help: [root@ibb0197 indy]# more /proc/bus/usb/ 001 devices drivers [root@ibb0197 indy]# more /p

[sane-devel] Mustek 1200 USB Plus - RH Linux 7.1

Hi, On Tue, Nov 06, 2001 at 01:09:03PM +0100, Christoph Kukulies wrote: > T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=055f ProdID=0007 Rev= 1.00 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 64mA > I: If#= 0 A

[sane-devel] make on FreeBSD 4.4 exits with error in backend Makefile

Hi, I'm trying to compile sane-1.0.6 on FreeBSD 4.4. I get the error "Error expanding embedded variable" when running make in the backend dir. The error _appears_ to be on line starting with "libsane-%.la:". Any help appreciated. Regards, Anders