On 4/29/08, Markham thomas wrote:
> With the TMA slide adaptor on the Scanjet 4570c does not work properly when
> : scan source = TMA negatives
> --> [hp5590] Top X (0) + pixels X (4292) exceedes max X 169
> xscanimage reports: Failed to start scanner: Invalid argument
>
> In fact with the TMA
On 4/29/08, Markham thomas wrote:
> Hi Ilia,
> Those changes are not the only ones required... It was still failing. I
> have a patch file I will post here once I test the modes. Let me test all
> the modes (I only tested full color preview and scan). I also haven't
> tested the ADF connec
"Markham thomas" wrote:
> I do have a question for you: I called the 4570 a:
> "Workgroup scanner"
>
> But im not sure if it should be that or a document scanner (per your entries
> in the hp5590 driver for other scanners). Any idea which it would be?
BTW For whoever compiles model lists:
I still can't get gmail to properly respond to later sub-posts...
>Could you shed some light on whether it requires to feed the film manually
(thus it is TMA) or automatically (thus it is APF)?
My device says: hp scanjet TMA on the top. It has a cord you plug into the
back of the scanner and you
With the TMA slide adaptor on the Scanjet 4570c does not work properly when
: scan source = TMA negatives
--> [hp5590] Top X (0) + pixels X (4292) exceedes max X 169
xscanimage reports: Failed to start scanner: Invalid argument
In fact with the TMA adaptor in place even choosing: scan source =
I was incorrect on the 4570 having a ADF unit, after pulling hardware out
of the closet I see its a 35mm slide unit that I had gathering dust.
I'll hook that up and see if it changes any of driver responses.
It also sounds like I should rename it to a document scanner to be a more
accurate descrip
2008/4/29 Markham thomas :
> Hi,
>I'm modifying the hp5590 backend to support the HP scanjet 4570c. I
> think i've finally figured out how to debug using gdb so I'm making progress
> now. I still need to figure out why the DPI is reported incorrectly, but im
> making progress.
Yes, you are ;
Hi Ilia,
Those changes are not the only ones required... It was still failing. I
have a patch file I will post here once I test the modes. Let me test all
the modes (I only tested full color preview and scan). I also haven't
tested the ADF connected to it. I may not get to testing it unti
Hi,
I'm modifying the hp5590 backend to support the HP scanjet 4570c. I
think i've finally figured out how to debug using gdb so I'm making progress
now. I still need to figure out why the DPI is reported incorrectly, but im
making progress.
extracted output showing It's communicating:
hp5590
