On Fri, Aug 29, 2003 at 05:21:08PM -0600, Horacio Samaniego wrote:
> Dear list members,
>
> I've been trying to install this HP scanner with partial to no
> success... I went through some of the messages that have been posted in
> the past addressing the issue but I seem to have no chance on htis
Dear list members,
I've been trying to install this HP scanner with partial to no
success... I went through some of the messages that have been posted in
the past addressing the issue but I seem to have no chance on htis
matter
I use 2.4.20-19.9 kernel on RedHat and it seem that there actua
On Fri, Mar 28, 2003 at 06:32:52PM -0300, Alejandro Noli wrote:
> I'm closer and closer... It will work, I know !!
>
> You know, I saw in the BIOS, the two values, and thought that selecting both
> it will be allright. I changed it. Now, only EPP, and is listed now.
>
> Finally scanimage -L sho
I'm closer and closer... It will work, I know !!
You know, I saw in the BIOS, the two values, and thought that selecting both it
will be allright. I changed it. Now, only EPP, and is listed now.
Finally scanimage -L showed what it has to. But, after that, I installed xsane
(that depends on li
On Tue, Mar 25, 2003 at 08:31:24AM -0300, Alejandro Noli wrote:
> S01: parport built as module
>
> S02: parport0:
> S02: modes:PCSPP,TRISTATE
> S02: ADDR :0x378
> S02: IRQ :no IRQ used
> S02: DMA :no DMA used
>
> S03: no parport parameters
>
> S10: couldn't find if ppdev is built in or
On Mon, Mar 24, 2003 at 06:31:01PM -0300, Alejandro Noli wrote:
> > OK. The problem seems related to /dev/parport0. Check its rights:
> >
> > #ls -l /dev/parport0
> > crw-rw-rw-1 root root 99, 0 mai 20 2002 /dev/parport0
> >
> > it should be rw for any users. Also check th
>
> Message: 1
> Date: Thu, 20 Mar 2003 17:40:46 +0100
> From: stef
> To: Alejandro Noli
> Cc: sane-de...@mostang.com
> Subject: Re: [sane-devel] ScanJet 3200C
>
> On Thu, Mar 20, 2003 at 10:37:45AM -0300, Alejandro Noli wrote:
> >
> > El jueves 20, a
On Thu, Mar 20, 2003 at 10:37:45AM -0300, Alejandro Noli wrote:
>
> El jueves 20, a las 06:20, stef escribió:
> > On Wed, Mar 19, 2003 at 06:14:04PM -0300, Alejandro Noli wrote:
> > > -
> >
> > If the umax_pp backend is loaded but probe fails, it won't
El jueves 20, a las 06:20, stef escribió:
> On Wed, Mar 19, 2003 at 06:14:04PM -0300, Alejandro Noli wrote:
> > -
>
> If the umax_pp backend is loaded but probe fails, it won't be shown by
> scanimage -L. Do 'export SANE_DEBUG_UMAX_PP=255' then send th
On Wed, Mar 19, 2003 at 06:14:04PM -0300, Alejandro Noli wrote:
> El miércoles 19, a las 18:48, stef escribió:
>
> > /usr/local/etc/sane.d) and change the line:
> >
> > #umax_pp
> >
> > to:
> >
> > umax_pp
> Already done, but nothing happens!
>
> Thanks.
>
> >
> > Everything should be OK.
>
On Wed, Mar 19, 2003 at 10:09:00AM -0300, Alejandro Noli wrote:
> Hi,
>
> I have installed the backend, but it works with umax_pp -p -t 1 and do not
> with scanimage -L.
>
> Where is the problem? I couldn't change the parport0/base-addr number to
> hex. I mean, the 888 is unchangeable !! Why
Hi,
I have installed the backend, but it works with umax_pp -p -t 1 and do not with
scanimage -L.
Where is the problem? I couldn't change the parport0/base-addr number to hex.
I mean, the 888 is unchangeable !! Why is that? Because the permissions?
Thanks, and accept my apologizes if this
12 matches
Mail list logo
