Folks,
Succeeded in installing SANE and xsane on an old PowerPC Mac G5 :-) It
even talks to my Fujitsu fi-4750c for scanning with xsane using the SCSI
card in my G5. Was able to scan from the flatbed and using the ADF from
page fronts (at least for a single test page).
So far, so,good. But whe
Hi Cecilia,
I recently pushed some changes to the git repository, I'm not sure if
they will help, but please give them a try and let me know if your
scanner is still having problems.
If it is still not working properly, could you send me two log dumps
from the working and non-working versions:
en
Hi Alejandro,
Sorry for my poor English.
I have a problem when scanning with source ADF, using Avision 122 scanner .
For every sheet the scanner pulls, the rotor goes up and down, causing a big
delay.
The behavior that has the scanner with the original driver is as follows:
The rotor goes down,
I tested "scanimage -b" with Avision 122 Scanner in different versions of
sane-backends
and behavior is as follows :
-sane-backends 1.0.21 : works correctly
-sane-backends1.0.22 : works incorrectly
-development source : works incorrectly
Help me please
On Wed, Mar 21, 2012 at 10:14 AM, Cecilia Biolatti
wrote:
> I tested "scanimage -b"?with Avision 122 Scanner in different versions
> of?sane-backends
> ??and behavior?is as follows :
>
> -sane-backends 1.0.21 : works correctly
>
> -sane-backends1.0.22 : works incorrectly
>
> -development source :
Hi
Sorry for my poor English
I have a problem when scanning with source ADF, using CANON DR-7080C scanner .
For every sheet the scanner pulls, the rotor goes up and down, causing a big
delay.
The behavior that has the scanner with the original driver is as follows:
The rotor goes down, then suck
I've just bought an HP 6300C scanner with ADF, and am trying to use
scanimage to do multi-page scanning using the document-feeder. It feeds
and scans the first page successfully, and then starts to feed the 2nd
page, when everything stops, with the messages:
scanimage: sane_read: Error duri
