Hi,
I'm still trying to reproduce your problem. Basically, the old (1.0.7)
code was just copied over and patched to support libieee1284. I guess as
soon as I have an 1015/01 scanner, I should be able to fix this.
i'll let you know as soon as I have something
kind regards
-- jochen
On Do, 2004-04-22 at 20:36, Jochen Eisinger wrote:
> ehrm, I meant the old one, the 1.0.7 config
ok
option io-mode alt_lock
option niceload
port 0x378
name SE-6000P
vendor Mustek
option wait-lamp 15
option strip-height 16
option buffer 122400
but the scanner also works with:
name MD984
Hi,
Julien Langer wrote:
> with mustek_pp 0.13-beta I used:
ehrm, I meant the old one, the 1.0.7 config
kind regards
-- jochen
On Do, 2004-04-22 at 17:35, Jochen Eisinger wrote:
> Hum, my SE 6000 P identifies itself with 0xa8 + CCD 0. Could you please
> attach the old (working) mustek_pp.conf (without all the comments)?
with mustek_pp 0.13-beta I used:
scanner mustek-ccd300 * ccd300
by the way it seems that the scanner
Hi,
Julien Langer wrote:
> [mustek_pp] ccd_init: found scanner on port ``parport0'' (ASIC id 0xa5, CCD 1)
Hum, my SE 6000 P identifies itself with 0xa8 + CCD 0. Could you please
attach the old (working) mustek_pp.conf (without all the comments)?
kind regards
-- jochen
Hi,
Ok, I'll test this tommorow (this scanner is in the basement and it's
late now...)
kind regards
-- jochen
Julien Langer wrote:
> Hello,
>
> ScanExpress 6000 P doesn't work correctly with mustek_pp backend
> 0.13-beta.
Hello,
ScanExpress 6000 P doesn't work correctly with mustek_pp backend
0.13-beta.
Here's an example image of the scanner:
http://www.weltenstadt.de/trash/mustek.jpg
These green and blue areas are different in size and position with every
scan.
Scanner works fine with sane version 1.0.7.
# scan
