GIMP-Print is not the best solution for the HP printer it limits the
resolution to 600 dpi and does not support the duplex unit. You should
use HPIJS, surf to
http://www.linuxprinting.org/show_printer.cgi?recnum=186729
for more info.
Till
Karl Heinz Kremer wrote:
> Try gimp-print.sourcef
Karl and Others:
I went back over this log and discovered that the file epson.conf file
had an incorrect entry . I changed the enty from "/dev/usb/scanner0" to
"usb /dev/usb/scanner0" as I had been instructed. Thanks for your
assistance and patience. Scanner seem to be working correctly an
--G4iJoqBmSsgzjUCe
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Try gimp-print.sourceforge.net.
On Mon, Oct 28, 2002 at 10:51:51PM -0500, John S. Dey wrote:
> Karl and Others:
>=20
> I went back over this log and discovered tha
--UHN/qo2QbUvPLonB
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
On Sun, Oct 27, 2002 at 02:06:34PM -0500, John S. Dey wrote:
> Karl:
>=20
> (1) You were right -- the permission was "crw---" but the owner was=
=20
> user. Wh
Karl:
(1) You were right -- the permission was "crw---" but the owner was
user. When I change the permission to "crw-rw-rw" and set owner to
"user.user" and logoff and logon again the values revert to "cwr---"
and "user.root". RH does something or maybe Gnome. I tried with
another u
--k+w/mQv8wyuph6w0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Sorry for the misunderstanding. The backend tries to send two bytes
(the reset command), but never receives the acknowledgement from
the scanner. You wrote in your
By home I meant that things are not working yet. Please note that the
device opens and the debug output ends with "Send buf, Size=2" I
rechecked the file epson.conf for the correct spelling for the device
name and it appears correct. Where do I go from here.
Karl Heinz Kremer wrote:
>This
John S. Dey wrote:
> Hello:
>
> I am trying to connect my Epson Perfection 1650 to a Up2date RH7.3 linux
> machine. I researched the archives and ran the follow test. The scanner
> is on and connected.
> The device, /dev/usb/scanner0, privelages was set to 666. Can anyone
> help me out with th
Karl:
Thanks for correcting my spelling. I'm not home yet however. When I
xsane, a window pops up and first says that it is "scanning for a
device" . After about 15 sec. the light on the scanner is blinking and
then the window goes blank and the light on the scanner stops blinking
and stays
--tqI+Z3u+9OQ7kwn0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
The log files show that you are trying to open the file
/dev/ubs/scanner0 and not /dev/usb/scanner0. I am pretty
sure that the scanner will work once you correct th
Hello:
I am trying to connect my Epson Perfection 1650 to a Up2date RH7.3 linux
machine.
I researched the archives and ran the follow test. The scanner is on and
connected.
The device, /dev/usb/scanner0, privelages was set to 666. Can anyone help me
out with the installation?
Thanks
TESTS
11 matches
Mail list logo
