Martin,
No, sorry, the information which Marcus Meissner needs, is here.
Marcus,
This is what Martin used in order to get the camera to work. The
Vendor:Product number is based upon the output of lsusb -v, which Martin
previously posted to me and to the sane-devel list. So at this point it
lo
The line was missing , I added it.
Now it shows up in the list:
===
[root@oldpc polaroid]# ldd /usr/local/bin/gphoto2
libpthread.so.0 => /lib/libpthread.so.0 (0x4001c000)
libreadline.so.4 => /usr/lib/libreadline.so.4 (0x4006e000)
libncurses.so.5 => /usr/l
; chmod 755 /usr/local/lib/libgphoto2.so.2 ??
>$ cat /usr/local/lib/libgphoto2.so.2 >/dev/null
> to see if you have access to it at all.
>$> ldd /usr/local/lib/libgphoto2.so.2
> and see if you can access all those listed.
>
>bjd
>
>
>
--
-- ne
Ok, I deleted all folders/files referencing libgphoto2* and gphoto2*
from my system - which removed all old and newer versions of each.
I re-did ./configure and make and make install, for libgphoto2-2.1.6 and
then gphoto2-2.1.6.
Now the only error message I'm getting is the following.
On Wed, 14 Sep 2005, Martin wrote:
> First off, I noticed that when I execute "gphoto2" it is running from 2.1.0
> version.
> After doing make and make install of version 2.1.6, where is the executable
> of gphoto2 installed that I can run from that version?
gphoto2 and libgphoto2 are two dif
Here is different debug output running the newer gphoto2 version 2.1.6.
==
[root@oldpc root]# env LANG=C /usr/local/bin/gphoto2 --debug --camera
"Polaroid PDC 640" --capture-image --port "usb:"
0.000104 main(2): ALWAYS INCLUDE THE FOLLOWING LINES WHEN SENDIN
First off, I noticed that when I execute "gphoto2" it is running from
2.1.0 version.
After doing make and make install of version 2.1.6, where is the
executable of gphoto2 installed that I can run from that version?
Maybe if I run with the 2.1.6 version, this will finally work.
Secondly, I notic
On Wed, 14 Sep 2005, Martin wrote:
> I installed libgphoto2-2.1.6.
>
> Edited the source file pdc640.c in the directory,
> libgphoto2-2.1.6/camlibs/polaroid/
>
> and added the lines,
>
> {"Clever CAM 360", 0x797, 0x8001, {
> jd350e,
> BAYER_TILE_BGGR,
> &jd350e_postprocessing_and_flip,
> "scope
On Sun, 11 Sep 2005, Martin wrote:
> The camera is identified as,
> idVendor 0x0797 Grandtech Semiconductor Corp.
> idProduct 0x8001 SmartCam
>
Hmmm. I will make some comments, about the output of lsusb -v,
below. The camera _may_ work with an existing driver, but it is not
obvious that it wil
I installed libgphoto2-2.1.6.
Edited the source file pdc640.c in the directory,
libgphoto2-2.1.6/camlibs/polaroid/
and added the lines,
{"Clever CAM 360", 0x797, 0x8001, {
jd350e,
BAYER_TILE_BGGR,
&jd350e_postprocessing_and_flip,
"scope%04i.ppm"
}
},
which is similar to the lines already there
I don't have this folder on my system, libgphoto2/camlibs/
Does something have to be installed to have it?
Thanks,
-Martin
IGENDIAN
+#ifdef WORDS_BIGENDIAN
if (depth == 16) {
status = genesys_reorder_components_endian_16(
work_buffer_src, work_buffer_dst,
From ger...@gkall.hobby.nl Mon Sep 12 16:09:41 2005
From: ger...@gkall.hobby.nl (gerard klaver)
Date: Mon Sep 12 16:10:17 2005
Sub
Martin,
Gerard has given you very good advice. Permit me to expand on it a bit.
Also feel free to contact me personally, after checking whether your
camera is mass-storage and after comparing it to the gphoto2 list of
supported cameras (go to gphoto.org to see that list). If it is not
mass-sto
Sep 10 08:30:37 2005
Subject: [sane-devel] Getting Clever CAM 360 working
In-Reply-To: <43223760.9050...@ix.netcom.com>
References: <43223760.9050...@ix.netcom.com>
Message-ID: <1126340998.7659.3.camel@gk-lex3>
On Fri, 2005-09-09 at 21:31 -0400, Martin wrote:
> I have a s
I have a small pen digital camera, called Clever CAM 360 from
TELEBrands, Fairfield, New Jersey USA (which might only be the USA
marketing company).
I was able to plug it into the usb port on my work laptop running
Windoze XP and was able to acquire the pictures from it.
I'm not exactly sure wh
15 matches
Mail list logo
